Get-MoveRequestStatistics

This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other. Use the Get-MoveRequestStatistics cmdlet to view detailed information about move requests. Some of the failure messages that are returned by this cmdlet are temporary and don't indicate that a request has actually failed. If the Status value is Queued or InProgress, then the request is proceeding normally. For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax (https://technet.microsoft.com/library/bb123552.aspx).

Syntax

Get-MoveRequestStatistics
   [-Identity] <MoveRequestIdParameter>
   [-DomainController <Fqdn>]
   [-IncludeReport]
   [-Diagnostic]
   [-DiagnosticArgument <String>]
   [-ProxyToMailbox <MailboxIdParameter>]
   [-ReportOnly]
   [<CommonParameters>]
Get-MoveRequestStatistics
   -MoveRequestQueue <DatabaseIdParameter>
   [-DomainController <Fqdn>]
   [-IncludeReport]
   [-MailboxGuid <Guid>]
   [-Diagnostic]
   [-DiagnosticArgument <String>]
   [-ProxyToMailbox <MailboxIdParameter>]
   [-ReportOnly]
   [<CommonParameters>]
Get-MoveRequestStatistics
   -MRSInstance <Fqdn>
   [-DomainController <Fqdn>]
   [-MailboxGuid <Guid>]
   [<CommonParameters>]

Description

The MoveRequestQueue parameter syntax set is for debugging purposes only.

You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet (https://technet.microsoft.com/library/mt432940.aspx).

Examples

-------------------------- Example 1 --------------------------

Get-MoveRequestStatistics -Identity Tony@contoso.com

This example returns the default statistics for Tony Smith's mailbox, which include the status, mailbox size, archive mailbox size, and the percentage complete.

-------------------------- Example 2 --------------------------

Get-MoveRequestStatistics -Identity "contoso\tony" | Format-List

This example returns the detailed statistics for Tony Smith's mailbox by pipelining the results to the Format-List command.

-------------------------- Example 3 --------------------------

Get-MoveRequestStatistics -Identity Tony@contoso.com -IncludeReport | Export-CSV C:\MRStats.csv

This example returns additional information about the mailbox move for Tony Smith's mailbox and exports the report to a .csv file.

-------------------------- Example 4 --------------------------

Get-MoveRequestStatistics -MoveRequestQueue "MBXDB02"

This example returns default statistics for all mailboxes whose move requests are in progress or haven't been cleared for the database MBXDB02.

-------------------------- Example 5 --------------------------

Get-MoveRequestStatistics -MRSInstance CAS01.contoso.com -MailboxGuid b6a6795c-a010-4f67-aaaa-da372d56fcb9

In Exchange Server 2010, this example returns default statistics for a mailbox that has been moved by the instance of the Microsoft Exchange Mailbox Replication service running on the server CAS01.

Required Parameters

-Identity

The Identity parameter specifies the identity of the mailbox or mail user. You can use one of the following values:

  • GUID

  • Distinguished name (DN)

  • Domain\Account

  • User principal name (UPN)

  • Legacy Exchange DN

  • SMTP address

  • Alias

You can use this parameter with the MoveRequestQueue or MailboxGuid parameters.

Type:MoveRequestIdParameter
Position:1
Default value:None
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016
-MRSInstance

The MRSInstance parameter specifies the fully qualified domain name (FQDN) of the Client Access server on which the Microsoft Exchange Mailbox Replication service (MRS) resides. When using this parameter, all records are returned for this instance of MRS.

This parameter can't be used in conjunction with the Identity or MoveRequestQueue parameters.

Type:Fqdn
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010
-MoveRequestQueue

This parameter is available only in on-premises Exchange.

The MoveRequestQueue parameter specifies the mailbox database on which the move request resides. You can use one of the following values:

  • GUID of the database

  • Database name

You can't use this parameter can't be used with the Identity or MRSInstance parameters.

Type:DatabaseIdParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016

Optional Parameters

-Diagnostic

The Diagnostic switch specifies whether to return extremely detailed information in the results. Typically, you use this switch only at the request of Microsoft Customer Service and Support to troubleshoot problems.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016
-DiagnosticArgument

The DiagnosticArgument parameter modifies the results that are returned by using the Diagnostic switch. Typically, you use the Diagnostic switch and the DiagnosticArgument parameter only at the request of Microsoft Customer Service and Support to troubleshoot problems.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016
-DomainController

This parameter is available only in on-premises Exchange.

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

Type:Fqdn
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016
-IncludeReport

The IncludeReport switch specifies whether to return additional details, which can be used for troubleshooting.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016
-MailboxGuid

This parameter is available only in on-premises Exchange.

The MailboxGuid parameter specifies the GUID of a mailbox for which you want to view the move request statistics.

This parameter can't be used with the Identity parameter.

Type:Guid
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016
-ProxyToMailbox

This parameter is available only in the cloud-based service.

The ProxyToMailbox parameter filters the results by the location of the specified mailbox (also known as proxying). You can use any value that uniquely identifies the mailbox.

For example:

  • Name

  • Display name

  • Alias

  • Distinguished name (DN)

  • Canonical DN

  • <domain name>\<account name>

  • Email address

  • GUID

  • LegacyExchangeDN

  • SamAccountName

  • User ID or user principal name (UPN)

Type:MailboxIdParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016
-ReportOnly

The ReportOnly switch returns the results as an array of report entries. You don't need to specify a value with this switch.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016

Inputs

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (https://go.microsoft.com/fwlink/p/?LinkId=616387). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.

Outputs

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (https://go.microsoft.com/fwlink/p/?LinkId=616387). If the Output Type field is blank, the cmdlet doesn't return data.