Set-ExchangeAssistanceConfig

This cmdlet is available only in on-premises Exchange.

Use the Set-ExchangeAssistanceConfig cmdlet to modify the Microsoft Exchange Help configurations for your organization.

For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax (https://technet.microsoft.com/library/bb123552.aspx).

Syntax

Set-ExchangeAssistanceConfig
   [[-Identity] <OrganizationIdParameter>]
   [-CommunityLinkDisplayEnabled <$true | $false>]
   [-CommunityURL <Uri>]
   [-Confirm]
   [-ControlPanelFeedbackEnabled <$true | $false>]
   [-ControlPanelFeedbackURL <Uri>]
   [-ControlPanelHelpURL <Uri>]
   [-DomainController <Fqdn>]
   [-ExchangeHelpAppOnline <$true | $false>]
   [-ManagementConsoleFeedbackEnabled <$true | $false>]
   [-ManagementConsoleFeedbackURL <Uri>]
   [-ManagementConsoleHelpURL <Uri>]
   [-OWAFeedbackEnabled <$true | $false>]
   [-OWAFeedbackURL <Uri>]
   [-OWAHelpURL <Uri>]
   [-OWALightFeedbackEnabled <$true | $false>]
   [-OWALightFeedbackURL <Uri>]
   [-OWALightHelpURL <Uri>]
   [-PrivacyLinkDisplayEnabled <$true | $false>]
   [-PrivacyStatementURL <Uri>]
   [-WhatIf]
   [<CommonParameters>]

Description

You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet (https://technet.microsoft.com/library/mt432940.aspx).

Examples

-------------------------- Example 1 --------------------------

Set-ExchangeAssistanceConfig -ExchangeHelpAppOnline $false -ManagementConsoleHelpURL 'http://exhelponline'

This example changes the Help location for the Exchange admin center.

Optional Parameters

-CommunityLinkDisplayEnabled

This parameter is reserved for internal Microsoft use.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
-CommunityURL

This parameter is reserved for internal Microsoft use.

Type:Uri
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
-Confirm

The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.

  • Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.

  • Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
-ControlPanelFeedbackEnabled

This parameter is reserved for internal Microsoft use.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
-ControlPanelFeedbackURL

This parameter is reserved for internal Microsoft use.

Type:Uri
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
-ControlPanelHelpURL

The ControlPanelHelpURL parameter specifies the URL where help for the Exchange admin center (EAC) is hosted.

Type:Uri
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
-DomainController

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.

Type:Fqdn
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
-ExchangeHelpAppOnline

The ExchangeHelpAppOnline specifies whether your organization uses the public help that's hosted by Microsoft. Valid values are:

  • $true: Your organization uses the help that's hosted by Microsoft. This is the default value.

  • $false: Your organization doesn't use the help that's hosted by Microsoft. You need to use the ControlPanelHelpURL, ManagementConsoleHelpURL, OWAHelpURL, and OWALightHelpURL parameters to configure the URLs where the help files are hosted.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
-Identity

This parameter is reserved for internal Microsoft use.

Type:OrganizationIdParameter
Position:1
Default value:None
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
-ManagementConsoleFeedbackEnabled

This parameter is reserved for internal Microsoft use.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
-ManagementConsoleFeedbackURL

This parameter is reserved for internal Microsoft use.

Type:Uri
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
-ManagementConsoleHelpURL

The ManagementConsoleHelpURL parameter specifies the URL where help for the Exchange Management Console (EMC) is hosted.

Type:Uri
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
-OWAFeedbackEnabled

This parameter is reserved for internal Microsoft use.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
-OWAFeedbackURL

This parameter is reserved for internal Microsoft use.

Type:Uri
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
-OWAHelpURL

The OWAHelpURL parameter specifies the URL for where help for the standard version of Outlook on the web is hosted.

Type:Uri
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
-OWALightFeedbackEnabled

This parameter is reserved for internal Microsoft use.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
-OWALightFeedbackURL

This parameter is reserved for internal Microsoft use.

Type:Uri
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
-OWALightHelpURL

The OWALightHelpURL parameter specifies the URL for where help for the light version of Outlook on the web is hosted.

Type:Uri
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
-PrivacyLinkDisplayEnabled

This parameter is reserved for internal Microsoft use.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
-PrivacyStatementURL

This parameter is reserved for internal Microsoft use.

Type:Uri
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
-WhatIf

The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

Inputs

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (https://go.microsoft.com/fwlink/p/?LinkId=616387). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.

Outputs

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (https://go.microsoft.com/fwlink/p/?LinkId=616387). If the Output Type field is blank, the cmdlet doesn't return data.