Get-MailPublicFolder

This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other. Use the Get-MailPublicFolder cmdlet to retrieve mail-related information about mail-enabled public folders. If you want information about the basic (not mail-related) settings of mail-enabled public folders, use the Get-PublicFolder cmdlet instead. For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax (https://technet.microsoft.com/library/bb123552.aspx).

Syntax

Get-MailPublicFolder
   [-Anr <String>]
   [-Credential <PSCredential>]
   [-DomainController <Fqdn>]
   [-Filter <String>]
   [-IgnoreDefaultScope]
   [-ReadFromDomainController]
   [-ResultSize <Unlimited>]
   [-Server <ServerIdParameter>]
   [-SortBy <String>]
   [<CommonParameters>]
Get-MailPublicFolder
   [[-Identity] <MailPublicFolderIdParameter>]
   [-Credential <PSCredential>]
   [-DomainController <Fqdn>]
   [-Filter <String>]
   [-IgnoreDefaultScope]
   [-ReadFromDomainController]
    [-ResultSize <Unlimited>]
   [-Server <ServerIdParameter>]
   [-SortBy <String>]
   [<CommonParameters>]

Description

You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet (https://technet.microsoft.com/library/mt432940.aspx).

Examples

-------------------------- Example 1 --------------------------

Get-MailPublicFolder -ResultSize 100 | Format-List

This example returns the information for up to 100 mail-enabled public folders. In this example, the output of the Get-MailPublicFolder command is piped to the Format-List command so that all the available information is displayed in the result.

-------------------------- Example 2 --------------------------

Get-MailPublicFolder -Identity \Marketing\Reports

This example returns information for the mail-enabled public folder Reports that resides in the Marketing top-level public folder.

-------------------------- Example 3 --------------------------

Get-MailPublicFolder -Anr Marketing*

This example returns all mail-enabled public folders that begin with the word Marketing by using the Anr parameter.

Optional Parameters

-Anr

The Anr parameter specifies a string on which to perform an ambiguous name resolution (ANR) search. You can specify a partial string and search for objects with an attribute that matches that string. The default attributes searched are:

  • CommonName (CN)

  • DisplayName

  • FirstName

  • LastName

  • Alias

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016
-Credential

The Credential parameter specifies the user name and password that's used to run this command. Typically, you use this parameter in scripts or when you need to provide different credentials that have the required permissions.

This parameter requires the creation and passing of a credential object. This credential object is created by using the Get-Credential cmdlet. For more information, see Get-Credential (https://go.microsoft.com/fwlink/p/?linkId=142122).

Type:PSCredential
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016
-DomainController

This parameter is available only in on-premises Exchange.

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

Type:Fqdn
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016
-Filter

The Filter parameter indicates the OPath filter used to filter recipients.

For more information about the filterable properties, see Filterable properties for the -Filter parameter (https://technet.microsoft.com/library/bb738155.aspx).

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016
-Identity

The Identity parameter specifies the GUID or public folder name that represents a specific public folder. You can also include the path using the format \TopLevelPublicFolder\PublicFolder.

You can omit the parameter label so that only the public folder name or GUID is supplied.

Type:MailPublicFolderIdParameter
Position:1
Default value:None
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016
-IgnoreDefaultScope

The IgnoreDefaultScope switch tells the command to ignore the default recipient scope setting for the Exchange Management Shell session, and to use the entire forest as the scope. This allows the command to access Active Directory objects that aren't currently available in the default scope.

Using the IgnoreDefaultScope switch introduces the following restrictions:

  • You can't use the DomainController parameter. The command uses an appropriate global catalog server automatically.

  • You can only use the DN for the Identity parameter. Other forms of identification, such as alias or GUID, aren't accepted.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016
-ReadFromDomainController

This parameter is available only in on-premises Exchange.

The ReadFromDomainController switch specifies that information should be read from a domain controller in the user's domain. If you run the command Set-AdServerSettings -ViewEntireForest $true to include all objects in the forest and you don't use the ReadFromDomainController switch, it's possible that information will be read from a global catalog that has outdated information. When you use the ReadFromDomainController switch, multiple reads might be necessary to get the information. You don't have to specify a value with this switch.

By default, the recipient scope is set to the domain that hosts your Exchange servers.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016
-ResultSize

The ResultSize parameter specifies the maximum number of results to return. If you want to return all requests that match the query, use unlimited for the value of this parameter. The default value is 1000.

Type:Unlimited
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016
-Server

The Server parameter specifies the identity of the server to perform the operation from. If a server isn't specified, the command checks whether the local server is a Mailbox server with a public folder store. If it is, the folder is created locally. If it isn't, the command finds the closest (by site cost) computer running Microsoft Exchange Server 2010 that has the Mailbox server role installed and that has a mounted public folder store.

Type:ServerIdParameter
Position:Named
Default value:None
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2010
-SortBy

The SortBy parameter specifies the property to sort the results by. You can sort by only one property at a time. The results are sorted in ascending order.

If the default view doesn't include the property you're sorting by, you can append the command with | Format-Table -Auto <Property1>,<Property2>... to create a new view that contains all of the properties that you want to see. Wildcards (*) in the property names are supported.

You can sort by the following properties:

  • Name

  • DisplayName

  • Alias

  • Id

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016

Inputs

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (https://go.microsoft.com/fwlink/p/?LinkId=616387). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.

Outputs

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (https://go.microsoft.com/fwlink/p/?LinkId=616387). If the Output Type field is blank, the cmdlet doesn't return data.