New-NetLbfoTeam
Creates a new NIC team.
Syntax
New-NetLbfoTeam
[-Name] <String>
[-TeamMembers] <WildcardPattern[]>
[[-TeamNicName] <String>]
[[-TeamingMode] <TeamingModes>]
[[-LoadBalancingAlgorithm] <LBAlgos>]
[-AsJob]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
Description
The New-NetLbfoTeam cmdlet creates a new NIC team that consists of one or more network adapters. Teaming network adapters of different speeds is not supported. You can create a team with network adapters of different speeds, but the network traffic distribution algorithms do not take the speed of each network adapter into consideration when distributing traffic.
When you create a team, you can specify additional properties such as TeamingMode and LoadBalancingAlgorithm.
You need administrator privileges to use New-NetLbfoTeam.
Examples
Example 1: Create a new team
PS C:\>New-NetLbfoTeam -Name Team1 -TeamMembers NIC1,NIC2
This command creates a new team named Team1 with two team members named NIC1 and NIC2.
Example 2: Create a new team with specified properties
PS C:\>New-NetLbfoTeam -Name Team1 -TeamMembers NIC1,NIC2 -TeamingMode LACP
-LoadBalancingAlgorithm HyperVPort
This command creates a new team named Team1 that consists of two team members named NIC1 and NIC2. The teaming mode is set to LACP and the load balancing algorithm is set to HyperVPorts.
Example 3: Create a new team in a virtual machine
PS C:\>Set-VMNetworkAdapter -VMName <VMname> -AllowTeaming
PS C:\>New-NetLbfoTeam -Name Team2 -TeamMembers NIC1,NIC2
This set of commands allows teaming in virtual machines by using the AllowTeaming parameter of the Set-VMNetworkAdapter cmdlet and then creates a team named Team2 in the virtual machine specified by VMName. You must run the following command in the host (parent partition) with administrator permissions.
Parameters
-AsJob
ps_cimcommon_asjob
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227967 or Get-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227966 cmdlet. The default is the current session on the local computer.
Type: | CimSession[] |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-LoadBalancingAlgorithm
Specifies the load-balancing algorithm the new team uses to distribute network traffic between the interfaces.
You can specify one of the following four load balancing algorithms:
TransportPorts: Uses the source and destination TCP ports and the IP addresses to create a hash and then assigns the packets that have the matching hash value to one of the available interfaces.
IPAddresses: Uses the source and destination IP addresses to create a hash and then assigns the packets that have the matching hash value to one of the available interfaces.
MacAddresses: Uses the source and destination MAC addresses to create a hash and then assigns the packets that have the matching hash value to one of the available interfaces.
HyperVPort: Distributes network traffic based on the source virtual machine Hyper-V switch port identifier.
Type: | LBAlgos |
Aliases: | lba |
Position: | 6 |
Default value: | TransportPorts |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-Name
Specifies the name of the new NIC team.
Type: | String |
Position: | 1 |
Default value: | None |
Required: | True |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-TeamingMode
Specifies the mode of the NIC teaming. You can specify one of the following three teaming modes:
LACP: Uses the IEEE 802.1ax Link Aggregation Control Protocol (LACP) to dynamically identify links that are connected between the host and a given switch. (This protocol was formerly known as IEEE 802.3ad draft)
Static: Requires configuration on both the switch and the host to identify which links form the team.
SwitchIndependent: Specifies that a network switch configuration is not needed for the NIC team. Because the network switch is not configured to know about the interface teaming, the team interfaces can be connected to different switches.
Type: | TeamingModes |
Aliases: | tm |
Position: | 5 |
Default value: | SwitchIndependent |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-TeamMembers
Specifies the names of the network adapters that are members of the new team. Specify multiple network adapter names (or wildcard patterns) separated by a comma.
Type: | WildcardPattern[] |
Position: | 2 |
Default value: | None |
Required: | True |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-TeamNicName
Specifies the name of the new team interface. This is the name used to reference the teamed network adapters.
Type: | String |
Position: | 4 |
Default value: | Same as team name |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0
is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Type: | Int32 |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Inputs
None
This cmdlet takes no input objects.
Outputs
MSFT_NetLbfoTeam
This cmdlet produces an MSFT_NetLbfoTeam object, corresponding to the newly created team.
Related Links
Feedback
https://aka.ms/ContentUserFeedback.
Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see:Submit and view feedback for