NetworkController

This reference provides cmdlet descriptions and syntax for all Network Controller cmdlets.

NetworkController

Add-NetworkControllerNode

Adds a network controller node to an existing network controller deployment.

Clear-NetworkControllerNodeContent

Clears Network Controller settings from a Network Controller node.

Disable-NetworkControllerNode

Disables a network controller node for maintenance purposes.

Enable-NetworkControllerNode

Enables a network controller node.

Get-NetworkController

Gets network controller application settings.

Get-NetworkControllerAccessControlList

Gets the access control list for a network controller.

Get-NetworkControllerAccessControlListRule

Gets a rule from an access control list for a network controller.

Get-NetworkControllerCluster

Gets the network controller cluster settings.

Get-NetworkControllerConnectivityCheck
Get-NetworkControllerConnectivityCheckResult
Get-NetworkControllerCredential

Retrieves a specified device credential or all device credentials from Network Controller.

Get-NetworkControllerDiagnostic

Gets network controller diagnostic settings.

Get-NetworkControllerFabricRoute

Gets a network route or all the routes in a subnet in the Network Controller.

Get-NetworkControllerGateway

Gets the configuration of one or more gateway virtual machines.

Get-NetworkControllerGatewayPool

Gets the configuration of one or more gateway pools.

Get-NetworkControllerInternalResourceInstances

This cmdlet provides mapping between the user generated resource ID and the internal instance ID in the Network Controller

Get-NetworkControllerIpPool

This cmdlet retrieves the settings of an IP pool from the Network Controller.

Get-NetworkControllerLoadBalancer

This cmdlet retrieves the configuration of a load balancer resource from the Network Controller

Get-NetworkControllerLoadBalancerBackendAddressPool

This cmdlet retrieves the back end address pool configuration associated with a load balancer.

Get-NetworkControllerLoadBalancerConfiguration

Retrieves the configuration of the load balancer from the Network Controller

Get-NetworkControllerLoadBalancerFrontendIpConfiguration

This cmdlet retrieves the front end IP configuration of a load balancer resource from the Network Controller

Get-NetworkControllerLoadBalancerInboundNatRule

This cmdlet retrieves an inbound NAT rule associated with a load balancer resource.

Get-NetworkControllerLoadBalancerMux

This cmdlet retrieves the configuration of a load balancer VM managed by the Network Controller

Get-NetworkControllerLoadBalancerOutboundNatRule

Retrieves the outbound NAT rules associated with a load balancer resource

Get-NetworkControllerLoadBalancerProbe

This cmdlet retrieves the health probes associated with a load balancer resource

Get-NetworkControllerLoadBalancingRule

This cmdlet retrieves a load balancing rule associated with a load balancer.

Get-NetworkControllerLogicalNetwork

Gets settings for a logical network in the Network Controller.

Get-NetworkControllerLogicalSubnet

Gets settings of a logical subnet in the Network Controller.

Get-NetworkControllerMacPool

This cmdlet retrieves the properties of a MAC pool from the Network Controller

Get-NetworkControllerNetworkInterface

Retrieves the settings of a network interface from the Network Controller

Get-NetworkControllerNetworkInterfaceIpConfiguration

This cmdlet retrieves the IP configuration of a network interface from the Network Controller

Get-NetworkControllerNode

Gets the network controller node settings.

Get-NetworkControllerPublicIpAddress

This cmdlet retrieves a public IP address resource from the Network Controller

Get-NetworkControllerRoute

This cmdlet retrieves a route from a particular route table in the Network Controller

Get-NetworkControllerRouteTable

This cmdlet retrieves the settings of a route table from the Network Controller

Get-NetworkControllerServer

Gets configuration of a physical host from the Network Controller.

Get-NetworkControllerServerInterface

Gets settings of physical network interfaces from the Network Controller.

Get-NetworkControllerServiceInsertion

This cmdlet retrieves the properties of a service insertion resource from the Network Controller.

Get-NetworkControllerState

This cmdlet retrieves the provisioning state of NetworkControllerState resource.

Get-NetworkControllerStatistics

This cmdlet displays health and usage statistics of resources in Network Controller

Get-NetworkControllerVirtualGateway

Gets the configuration of one or more virtual gateways.

Get-NetworkControllerVirtualGatewayBgpPeer

Gets a BGP peer.

Get-NetworkControllerVirtualGatewayBgpRouter

Gets a BGP router.

Get-NetworkControllerVirtualGatewayNetworkConnection

Gets a virtual gateway network connection.

Get-NetworkControllerVirtualGatewayPolicyMap

Gets a BGP routing policy map.

Get-NetworkControllerVirtualNetwork

This cmdlet retrieves the settings of a virtual network from the Network Controller

Get-NetworkControllerVirtualNetworkConfiguration
Get-NetworkControllerVirtualServer
Get-NetworkControllerVirtualSubnet

This cmdlet retrieves a virtual subnet belonging to a virtual network

Get-NetworkControllerVirtualSwitchConfiguration

This cmdlet retrieves the global settings of the virtual switch from the Network Controller

Install-NetworkController

Creates a network controller application on top of the network controller cluster.

Install-NetworkControllerCluster

Creates a Network Controller cluster.

Invoke-NetworkControllerConnectivityCheck
Invoke-NetworkControllerState

This cmdlet dumps the current configuration and state of Network Controller services on the local Network Controller nodes

New-NetworkControllerAccessControlList

This cmdlet creates a new access control list for allowing/denying traffic to/from a particular subnet or network interface

New-NetworkControllerAccessControlListRule

This cmdlet creates a new ACL rule to allow/deny traffic to/from a particular virtual subnet or network interface

New-NetworkControllerCredential

Adds or modifies a device credential in Network Controller.

New-NetworkControllerFabricRoute

Adds a route to a network subnet in the Network Controller

New-NetworkControllerGateway

Creates a gateway virtual machine.

New-NetworkControllerGatewayPool

Creates a gateway pool.

New-NetworkControllerIpPool

This cmdlet adds a new IP address pool to an existing subnet in an existing network

New-NetworkControllerLoadBalancer

This cmdlet adds/updates a load balancer resource.

New-NetworkControllerLoadBalancerBackendAddressPool

This cmdlet adds/updates the configuration of a backend address pool resource associated with a load balancer.

New-NetworkControllerLoadBalancerConfiguration

This cmdlet adds/updates the configuration of load balancer in Network Controller

New-NetworkControllerLoadBalancerFrontendIpConfiguration

This cmdlet adds/updates the front end IP configuration of a load balancer resource.

New-NetworkControllerLoadBalancerInboundNatRule

This cmdlet adds/updates an inbound NAT rule associated with a load balancer resource.

New-NetworkControllerLoadBalancerMux

This cmdlet adds/updates the configuration of a load balancer VM managed by the Network Controller.

New-NetworkControllerLoadBalancerOutboundNatRule

Creates/modifies outbound NAT rules associated with a load balancer resource.

New-NetworkControllerLoadBalancerProbe

This cmdlet adds/updates the health probes associated with a load balancer.

New-NetworkControllerLoadBalancingRule

This cmdlet adds/updates a load balancing rule associated with a load balancer.

New-NetworkControllerLogicalNetwork

Adds or updates a logical network in Network Controller.

New-NetworkControllerLogicalSubnet

Adds or updates a logical subnet in the Network Controller.

New-NetworkControllerMacPool

This cmdlet creates a new MAC pool in the Network Controller

New-NetworkControllerNetworkInterface

This cmdlet adds a new network interface resource to the Network Controller

New-NetworkControllerNetworkInterfaceIpConfiguration

This cmdlet adds/updates an IP configuration to a network interface in the Network Controller

New-NetworkControllerNodeObject

Creates a network controller node object.

New-NetworkControllerPublicIpAddress

This cmdlet adds/updates a public IP address resource in the Network Controller.

New-NetworkControllerRoute

This cmdlet adds a new route to the Network Controller

New-NetworkControllerRouteTable

This cmdlet creates a new route table in the Network Controller

New-NetworkControllerServer

Creates or Updates a server resource in the Network Controller

New-NetworkControllerServerInterface

Creates or updates a physical network interface resource in the Network Controller.

New-NetworkControllerServiceInsertion

This cmdlet adds a new service insertion resource to the Network Controller

New-NetworkControllerVirtualGateway

Creates a virtual gateway.

New-NetworkControllerVirtualGatewayBgpPeer

Creates a BGP peer.

New-NetworkControllerVirtualGatewayBgpRouter

Creates a BGP router.

New-NetworkControllerVirtualGatewayNetworkConnection

Creates a virtual gateway network connection.

New-NetworkControllerVirtualGatewayPolicyMap

Creates a BGP routing policy map.

New-NetworkControllerVirtualNetwork

Creates a new virtual network or updates an existing virtual network

New-NetworkControllerVirtualServer

Adds a new virtual server to the Network Controller. If already present, updates the properties of the virtual server

New-NetworkControllerVirtualSubnet

This cmdlet creates a new virtual subnet in a virtual network, or updates a virtual subnet in a virtual network

Remove-NetworkControllerAccessControlList

This cmdlet removes an access control list from the Network Controller

Remove-NetworkControllerAccessControlListRule

Removes a rule from an access control list

Remove-NetworkControllerCredential

Deletes a specified device credential from the Network Controller.

Remove-NetworkControllerFabricRoute

Removes a network route from the Network Controller.

Remove-NetworkControllerGateway

Removes the gateway virtual machine configuration from a tenant.

Remove-NetworkControllerGatewayPool

Removes a gateway pool.

Remove-NetworkControllerIpPool

This cmdlet removes an IP pool from a network

Remove-NetworkControllerLoadBalancer

This cmdlet removes a load balancer resource from the Network Controller

Remove-NetworkControllerLoadBalancerBackendAddressPool

This cmdlet removes a backend address pool from a load balancer resource

Remove-NetworkControllerLoadBalancerConfiguration

This cmdlet removes load balancer configuration from the Network Controller

Remove-NetworkControllerLoadBalancerFrontendIpConfiguration

This cmdlet removes a front end IP configuration resource from the Network Controller

Remove-NetworkControllerLoadBalancerInboundNatRule

This cmdlet removes an inbound NAT rule associated with a load balancer resource.

Remove-NetworkControllerLoadBalancerMux

This cmdlet removes a load balancer MUX from the Network Controller

Remove-NetworkControllerLoadBalancerOutboundNatRule

This cmdlet removes an outbound NAT rule associated with a load balancer resource

Remove-NetworkControllerLoadBalancerProbe

This cmdlet removes a health probe rule associated with a load balancer resource

Remove-NetworkControllerLoadBalancingRule

This cmdlet removes a load balancing rule from a load balancer resource

Remove-NetworkControllerLogicalNetwork

Removes a logical network from the Network Controller.

Remove-NetworkControllerLogicalSubnet

Removes a logical subnet from the Network Controller.

Remove-NetworkControllerMacPool

This cmdlet removes a MAC pool from the Network Controller

Remove-NetworkControllerNetworkInterface

This cmdlet removes a network interface resource from the Network Controller

Remove-NetworkControllerNetworkInterfaceIpConfiguration

This cmdlet removes an IP configuration resource pertaining to a network interface.

Remove-NetworkControllerNode

Removes a node from the network controller deployment.

Remove-NetworkControllerPublicIpAddress

This cmdlet removes a public IP address resource from the Network Controller

Remove-NetworkControllerRoute

This cmdlet removes a route from a particular route table

Remove-NetworkControllerRouteTable

This cmdlet removes a route table from the Network Controller

Remove-NetworkControllerServer

Removes a server resource from the Network Controller.

Remove-NetworkControllerServerInterface

Removes a network interface resource from the Network Controller.

Remove-NetworkControllerServiceInsertion

This cmdlet removes a service insertion resource from the Network Controller.

Remove-NetworkControllerVirtualGateway

Removes a virtual gateway.

Remove-NetworkControllerVirtualGatewayBgpPeer

Removes a BGP peer.

Remove-NetworkControllerVirtualGatewayBgpRouter

Removes a BGP router.

Remove-NetworkControllerVirtualGatewayNetworkConnection

Removes a virtual gateway network connection.

Remove-NetworkControllerVirtualGatewayPolicyMap

Removes a BGP routing policy map.

Remove-NetworkControllerVirtualNetwork

This cmdlet removes a virtual network from the Network Controller

Remove-NetworkControllerVirtualServer

This cmdlet removes a virtual server resource from the Network Controller.

Remove-NetworkControllerVirtualSubnet

This cmdlet removes a virtual subnet from a virtual network

Repair-NetworkControllerCluster

Repairs the network controller to bring it out of quorum loss.

Set-NetworkController

Sets network controller application settings.

Set-NetworkControllerCluster

Sets a network controller cluster.

Set-NetworkControllerDiagnostic

Changes diagnostic settings for the Network Controller.

Set-NetworkControllerNode

Sets a node in a network controller cluster.

Set-NetworkControllerVirtualNetworkConfiguration

This cmdlet sets the global configuration for virtual networking in the Network Controller.

Set-NetworkControllerVirtualSwitchConfiguration

This cmdlet sets the global settings of the virtual switch from the Network Controller.

Uninstall-NetworkController

Removes the network controller application deployed on a network controller cluster.

Uninstall-NetworkControllerCluster

Uninstalls the network controller cluster.

Update-NetworkController

Updates the Network Controller binaries.