Set-NetNatTransitionConfiguration

Sets the NAT64 configuration on a computer.

Syntax

Set-NetNatTransitionConfiguration
   [-InstanceName <String[]>]
   [-PolicyStore <PolicyStore[]>]
   [-Adapter <CimInstance>]
   [-State <State>]
   [-InboundInterface <String[]>]
   [-OutboundInterface <String[]>]
   [-PrefixMapping <String[]>]
   [-IPv4AddressPortPool <String[]>]
   [-TcpMappingTimeoutSeconds <UInt32>]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [-PassThru]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-NetNatTransitionConfiguration
   -InputObject <CimInstance[]>
   [-State <State>]
   [-InboundInterface <String[]>]
   [-OutboundInterface <String[]>]
   [-PrefixMapping <String[]>]
   [-IPv4AddressPortPool <String[]>]
   [-TcpMappingTimeoutSeconds <UInt32>]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [-PassThru]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

The Set-NetNatTransitionConfiguration cmdlet sets the NAT64 configuration on a computer.

Examples

Example 1: Set the NAT64 configuration

PS C:\>$nat64Prefix = "2009:1:2:3:4:5::/96"
PS C:\> $prefixMapping = "$nat64Prefix,0.0.0.0/0"
PS C:\> $portPool = "33.0.0.1,6000-10000"
PS C:\> Set-NetNatTransitionConfiguration -InstanceName "NAT64" OutboundInterface "corpnet" -PrefixMapping $prefixMapping -IPv4AddressPortPool $portPool

This command sets the NAT64 configuration for the instance named NAT64.

Parameters

-Adapter

Specifies the network adapter on which to apply the NAT64 configuration.

Type:CimInstance
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-AsJob

Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.

Type:CimSession[]
Aliases:Session
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-InboundInterface

Sets the interface on which the NAT64 is listening for the matching incoming IPv6 traffic.

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-InputObject

Specifies the input object that is used in a pipeline command.

Type:CimInstance[]
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-InstanceName

Specifies the instance of the NAT64 which is being configured.

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-IPv4AddressPortPool

Specifies the list of IPv4 address and port ranges to be used by NAT64 for creating the mappings from the IPv6 source address to the IPv4 target address. The format is a comma-separated list of <IPv4 address,Lowport-Highport>. Such as "10.0.0.2,1024-3388","10.0.0.2,4000-49023". The port value must be between 1024 and 65535. The wildcard character (*) can be specified to use the whole port range, such as 10.0.0.1,*.

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-OutboundInterface

Sets the interface on which the NAT64 sends the translated IPv4 traffic.

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-PolicyStore

Specifies to which policy store the NAT64 configuration is applied. The acceptable values for this parameter are: Persistent and Active. If this parameter is not specified, then the cmdlet operates on both active and persistent stores.

Type:PolicyStore[]
Aliases:Store
Accepted values:PersistentStore, ActiveStore
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-PrefixMapping

Sets the list of IPv6 address ranges to be translated by the NAT64. The format is a comma-separated list of <IPv6 prefix,IPv4 subnet>. Such as "69:FF9B::/96,0.0.0.0/0","66:FF9B::/96,192.2.0.0/8".

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-State

Sets the enabled state of the NAT64 configuration.

Type:State
Accepted values:Disabled, Enabled
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-TcpMappingTimeoutSeconds

Specifies the lifetime for a TCP mapping after which it is released by the NAT64. The minimum value is 1800 seconds.

The default value is 7200 seconds.

Type:UInt32
Aliases:TcpMappingTimeout
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ThrottleLimit

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

Inputs

None

Outputs

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.