Scheduler Agent Supervisor Pattern

MessagingResiliencyDesign PatternsShow All

Coordinate a set of actions across a distributed set of services and other remote resources, attempt to transparently handle faults if any of these actions fail, or undo the effects of the work performed if the system cannot recover from a fault. This pattern can add resiliency to a distributed system by enabling it to recover and retry actions that fail due to transient exceptions, long-lasting faults, and process failures.

Context and Problem

An application performs tasks that comprise a number of steps, some of which may invoke remote services or access remote resources. The individual steps may be independent of each other, but they are orchestrated by the application logic that implements the task.

Whenever possible, the application should ensure that the task runs to completion and resolve any failures that might occur when accessing remote services or resources. These failures could occur for a variety of reasons. For example, the network might be down, communications could be interrupted, a remote service may be unresponsive or in an unstable state, or a remote resource might be temporarily inaccessible—perhaps due to resource constraints. In many cases these failures may be transient and can be handled by using the Retry pattern.

If the application detects a more permanent fault from which it cannot easily recover, it must be able to restore the system to a consistent state and ensure integrity of the entire end-to-end operation.

Solution

The Scheduler Agent Supervisor pattern defines the following actors. These actors orchestrate the steps (individual items of work) to be performed as part of the task (the overall process):

  • The Scheduler arranges for the individual steps that comprise the overall task to be executed and orchestrates their operation. These steps can be combined into a pipeline or workflow, and the Scheduler is responsible for ensuring that the steps in this workflow are performed in the appropriate order. The Scheduler maintains information about the state of the workflow as each step is performed (such as “step not yet started,” “step running,” or “step completed”) and records information about this state. This state information should also include an upper limit of the time allowed for the step to finish (referred to as the Complete By time). If a step requires access to a remote service or resource, the Scheduler invokes the appropriate Agent, passing it the details of the work to be performed. The Scheduler typically communicates with an Agent by using asynchronous request/response messaging. This can be implemented by using queues, although other distributed messaging technologies could be used instead.

    Note

    The Scheduler performs a similar function to the Process Manager in the Process Manager pattern. The actual workflow is typically defined and implemented by a workflow engine that is controlled by the Scheduler. This approach decouples the business logic in the workflow from the Scheduler.

  • The Agent contains logic that encapsulates a call to a remote service, or access to a remote resource referenced by a step in a task. Each Agent typically wraps calls to a single service or resource, implementing the appropriate error handling and retry logic (subject to a timeout constraint, described later). If the steps in the workflow being run by the Scheduler utilize several services and resources across different steps, each step might reference a different Agent (this is an implementation detail of the pattern).

  • The Supervisor monitors the status of the steps in the task being performed by the Scheduler. It runs periodically (the frequency will be system-specific), examines the status of steps as maintained by the Scheduler. If it detects any that have timed out or failed, it arranges for the appropriate Agent to recover the step or execute the appropriate remedial action (this may involve modifying the status of a step). Note that the recovery or remedial actions are typically implemented by the Scheduler and Agents. The Supervisor should simply request that these actions be performed.

The Scheduler, Agent, and Supervisor are logical components and their physical implementation depends on the technology being used. For example, several logical agents may be implemented as part of a single web service.

The Scheduler maintains information about the progress of the task and the state of each step in a durable data store, referred to as the State Store. The Supervisor can use this information to help determine whether a step has failed. Figure 1 illustrates the relationship between the Scheduler, the Agents, the Supervisor, and the State Store.

Figure 1 - The actors in the Scheduler Agent Supervisor pattern

Figure 1 - The actors in the Scheduler Agent Supervisor pattern

Note

This diagram shows a simplified illustration of the pattern. In a real implementation, there may be many instances of the Scheduler running concurrently, each a subset of tasks. Similarly, the system could run multiple instances of each Agent, or even multiple Supervisors. In this case, Supervisors must coordinate their work with each other carefully to ensure that they don’t compete to recover the same failed steps and tasks. The Leader Election pattern provides one possible solution to this problem.

When an application wishes to run a task, it submits a request to the Scheduler. The Scheduler records initial state information about the task and its steps (for example, “step not yet started”) in the State Store and then commences performing the operations defined by the workflow. As the Scheduler starts each step, it updates the information about the state of that step in the State Store (for example, “step running”).

If a step references a remote service or resource, the Scheduler sends a message to the appropriate Agent. The message may contain the information that the Agent needs to pass to the service or access the resource, in addition to the Complete By time for the operation. If the Agent completes its operation successfully, it returns a response to the Scheduler. The Scheduler can then update the state information in the State Store (for example, “step completed”) and perform the next step. This process continues until the entire task is complete.

An Agent can implement any retry logic that is necessary to perform its work. However, if the Agent does not complete its work before the Complete By period expires the Scheduler will assume that the operation has failed. In this case, the Agent should stop its work and not attempt to return anything to the Scheduler (not even an error message), or attempt any form of recovery. The reason for this restriction is that, after a step has timed out or failed, another instance of the Agent may be scheduled to run the failing step (this process is described later).

If the Agent itself fails, the Scheduler will not receive a response. The pattern may not make a distinction between a step that has timed out and one that has genuinely failed.

If a step times out or fails, the State Store will contain a record that indicates that the step is running (“step running”), but the Complete By time will have passed. The Supervisor looks for steps such as this and attempts to recover them. One possible strategy is for the Supervisor to update the Complete By value to extend the time available to complete the step, and then send a message to the Scheduler identifying the step that has timed out . The Scheduler can then attempt to repeat this step. However, such a design requires the tasks to be idempotent.

It may be necessary for the Supervisor to prevent the same step from being retried if it continually fails or times out. To achieve this, the Supervisor could maintain a retry count for each step, along with the state information, in the State Store. If this count exceeds a predefined threshold the Supervisor can adopt a strategy such as waiting for an extended period before notifying the Scheduler that it should retry the step, in the expectation that the fault will be resolved during this period. Alternatively, the Supervisor can send a message to the Scheduler to request the entire task be undone by implementing a Compensating Transaction (this approach will depend on the Scheduler and Agents providing the information necessary to implement the compensating operations for each step that completed successfully).

Note

It is not the purpose of the Supervisor to monitor the Scheduler and Agents, and restart them if they fail. This aspect of the system should be handled by the infrastructure in which these components are running. Similarly, the Supervisor should not have knowledge of the actual business operations that the tasks being performed by the Scheduler are running (including how to compensate should these tasks fail). This is the purpose of the workflow logic implemented by the Scheduler. The sole responsibility of the Supervisor is to determine whether a step has failed and arrange either for it to be repeated or for the entire task containing the failed step to be undone.

If the Scheduler is restarted after a failure, or the workflow being performed by the Scheduler terminates unexpectedly, the Scheduler should be able to determine the status of any in-flight task that it was handling when it failed, and be prepared to resume this task from the point at which it failed. The implementation details of this process are likely to be system specific. If the task cannot be recovered, it may be necessary to undo the work already performed by the task. This may also require implementing a Compensating Transaction.

The key advantage of this pattern is that the system is resilient in the event of unexpected temporary or unrecoverable failures. The system can be constructed to be self-healing. For example, if an Agent or the Scheduler crashes, a new one can be started and the Supervisor can arrange for a task to be resumed. If the Supervisor fails, another instance can be started and can take over from where the failure occurred. If the Supervisor is scheduled to run periodically, a new instance may be automatically started after a predefined interval. The State Store may be replicated to achieve an even greater degree of resiliency.

Issues and Considerations

You should consider the following points when deciding how to implement this pattern:

  • This pattern may be nontrivial to implement and requires thorough testing of each possible failure mode of the system.
  • The recovery/retry logic implemented by the Scheduler may be complex and dependent on state information held in the State Store. It may also be necessary to record the information required to implement a Compensating Transaction in a durable data store.
  • The frequency with which the Supervisor runs will be important. It should run frequently enough to prevent any failed steps from blocking an application for an extended period, but it should not run so frequently that it becomes an overhead.
  • The steps performed by an Agent could be run more than once. The logic that implements these steps should be idempotent.

When to Use this Pattern

Use this pattern when a process that runs in a distributed environment such as the cloud must be resilient to communications failure and/or operational failure.

This pattern might not be suitable for tasks that do not invoke remote services or access remote resources.

Example

A web application that implements an ecommerce system has been deployed on Microsoft Azure. Users can run this application to browse the products available from an organization, and place orders for these products. The user interface runs as a web role, and the order processing elements of the application are implemented as a set of worker roles. Part of the order processing logic involves accessing a remote service, and this aspect of the system could be prone to transient or more long-lasting faults. For this reason, the designers used the Scheduler Agent Supervisor pattern to implement the order processing elements of the system.

When a customer places an order, the application constructs a message that describes the order and posts this message to a queue. A separate Submission process, running in a worker role, retrieves this message, inserts the details of the order into the Orders database, and creates a record for the order process in the State Store. Note that the inserts into the Orders database and the State Store are performed as part of the same operation. The Submission process is designed to ensure that both inserts complete together.

The state information that the Submission process creates for the order includes:

  • OrderID: The ID of the order in the Orders database.
  • LockedBy: The instance ID of the worker role handling the order. There may be multiple current instances of the worker role running the Scheduler, but each order should only be handled by a single instance.
  • CompleteBy: The time by which the order should be processed.
  • ProcessState: The current state of the task handling the order. The possible states are:
    • Pending. The order has been created but processing has not yet been initiated.
    • Processing. The order is currently being processed.
    • Processed. The order has been processed successfully.
    • Error. The order processing has failed.
  • FailureCount: The number of times that processing has been attempted for the order.

In this state information, the OrderID field is copied from the order ID of the new order. The LockedBy and CompleteBy fields are set to null, the ProcessState field is set to Pending, and the FailureCount field is set to 0.

Note

In this example, the order handling logic is relatively simple and only comprises a single step that invokes a remote service. In a more complex multi-step scenario, the Submission process would likely involve several steps, and so several records would be created in the State Store—each one describing the state of an individual step.

The Scheduler also runs as part of a worker role and implements the business logic that handles the order. An instance of the Scheduler polling for new orders examines the State Store for records where the LockedBy field is null and the ProcessState field is Pending. When the Scheduler finds a new order, it immediately populates the LockedBy field with its own instance ID, sets the CompleteBy field to an appropriate time, and sets the ProcessState field to Processing. The code that does this is designed to be exclusive and atomic to ensure that two concurrent instances of the Scheduler cannot attempt to handle the same order simultaneously.

The Scheduler then runs the business workflow to process the order asynchronously, passing it the value in the OrderID field from the State Store. The workflow handling the order retrieves the details of the order from the Orders database and performs its work. When a step in the order processing workflow needs to invoke the remote service, it uses an Agent. The workflow step communicates with the Agent by using a pair of Azure Service Bus message queues acting as a request/response channel. Figure 2 shows a high-level view of the solution.

Figure 2 - Using the Scheduler Agent Supervisor pattern to handle orders in a Azure solution

Figure 2 - Using the Scheduler Agent Supervisor pattern to handle orders in a Azure solution

The message sent to the Agent from a workflow step describes the order and includes the CompleteBy time. If the Agent receives a response from the remote service before the CompleteBy time expires, it constructs a reply message that it posts on the Service Bus queue on which the workflow is listening. When the workflow step receives the valid reply message, it completes its processing and the Scheduler sets the ProcessState field of the order state to Processed. At this point, the order processing has completed successfully.

If the CompleteBy time expires before the Agent receives a response from the remote service, the Agent simply halts its processing and terminates handling the order. Similarly, if the workflow handling the order exceeds the CompleteBy time, it also terminates. In both of these cases, the state of the order in the State Store remains set to Processing, but the CompleteBy time indicates that the time for processing the order has passed and the process is deemed to have failed. Note that if the Agent that is accessing the remote service, or the workflow that is handling the order (or both) terminate unexpectedly, the information in the State Store will again remain set to Processing and eventually will have an expired CompleteBy value.

If the Agent detects an unrecoverable non-transient fault while it is attempting to contact the remote service, it can send an error response back to the workflow. The Scheduler can set the status of the order to Error and raise an event that alerts an operator. The operator can then attempt to resolve the reason for the failure manually and resubmit the failed processing step.

The Supervisor periodically examines the State Store looking for orders with an expired CompleteBy value. If the Supervisor finds such a record, it increments the FailureCount field. If the FailureCount value is below a specified threshold value, the Supervisor resets the LockedBy field to null, updates the CompleteBy field with a new expiration time, and sets the ProcessState field to Pending. An instance of the Scheduler can pick up this order and perform its processing as before. If the FailureCount value exceeds a specified threshold, the reason for the failure is assumed to be non-transient. The Supervisor sets the status of the order to Error and raises an event that alerts an operator, as previously described.

Note

In this example, the Supervisor is implemented in a separate worker role. You can utilize a variety of strategies to arrange for the Supervisor task to be run, including using the Azure Scheduler service (not to be confused with the Scheduler component in this pattern). For more information about the Azure Scheduler service, visit the Scheduler page.

Although it is not shown in this example, the Scheduler may need to keep the application that submitted the order in the first place informed about the progress and status of the order. The application and the Scheduler are isolated from each other to eliminate any dependencies between them. The application has no knowledge of which instance of the Scheduler is handling the order, and the Scheduler is unaware of which specific application instance posted the order.

To enable the order status to be reported, the application could use its own private response queue. The details of this response queue would be included as part of the request sent to the Submission process, which would include this information in the State Store. The Scheduler would then post messages to this queue indicating the status of the order (“request received,” “order completed,” “order failed,” and so on). It should include the Order ID in these messages so that they can be correlated with the original request by the application.

Related Patterns and Guidance

The following patterns and guidance may also be relevant when implementing this pattern:

  • Retry Pattern. An Agent can use this pattern to transparently retry an operation that accesses a remote service or resource, and that has previously failed, in the expectation that the cause of the failure is transient and may be corrected.
  • Circuit Breaker Pattern. An Agent can use this pattern to handle faults that may take a variable amount of time to rectify when connecting to a remote service or resource.
  • Compensating Transaction Pattern. If the workflow being performed by a Scheduler cannot be completed successfully, it may be necessary to undo any work it has previously performed. The Compensating Transaction pattern describes how this can be achieved for operations that follow the eventual consistency model. These are the types of operations that are commonly implemented by a Scheduler that performs complex business processes and workflows.
  • Asynchronous Messaging Primer. The components in the Scheduler Agent Supervisor pattern typically run decoupled from each other and communicate asynchronously. The Asynchronous Messaging primer describes some of the approaches that can be used to implement asynchronous communication based on message queues.
  • Leader Election Pattern. It may be necessary to coordinate the actions of multiple instances of a Supervisor to prevent them from attempting to recover the same failed process. The Leader Election pattern describes how this coordination can be achieved.

More Information

Next Topic | Previous Topic | Home | Community

patterns & practices Developer Center