IP PBX and PBX Support
Microsoft Exchange Server 2007 will reach end of support on April 11, 2017. To stay supported, you will need to upgrade. For more information, see Resources to help you upgrade your Office 2007 servers and clients.
Applies to: Exchange Server 2007, Exchange Server 2007 SP1, Exchange Server 2007 SP2, Exchange Server 2007 SP3
Microsoft Exchange Server 2007 Unified Messaging relies on an IP gateway that can receive incoming calls from a legacy Private Branch eXchange (PBX) or on an IP PBX that can receive incoming calls and then correctly forward those incoming calls to a Unified Messaging server in your organization. This topic discusses some issues that can occur when you are interoperating IP PBXs and PBXs. This topic also gives you information and links to the appropriate resources for successfully deploying Exchange 2007 Unified Messaging.
We recommend that all customers who plan to deploy Exchange 2007 Unified Messaging obtain the assistance of a Unified Messaging specialist. A Unified Messaging specialist helps you make sure that there is a smooth transition to Exchange 2007 Unified Messaging from a legacy voice mail system. Performing a new deployment or upgrading a legacy voice mail system requires significant knowledge about PBXs and Exchange 2007 Unified Messaging. For more information about how to contact a Unified Messaging specialist, see the Microsoft Exchange Server 2007 Unified Messaging (UM) Specialists Web site.
IP PBX Support
An IP PBX is a telephone switching system inside an enterprise that switches calls between Voice over IP (VoIP) users on local lines and lets all users share a certain number of external telephone lines. The typical IP PBX can also switch calls between a VoIP user and a traditional telephone user, or between two traditional telephone users much like a conventional PBX does. With a conventional PBX, you must have separate networks for voice and data communications. One of the main advantages of an IP PBX is that it uses converged data and voice networks. This means that network access, in addition to VoIP communications and traditional telephone communications, are all possible by using a single line to each user. Like a traditional PBX, an IP PBX is typically owned by an organization.
There are many manufacturers of IP PBXs. However, for an IP PBX to interoperate with Exchange 2007 Unified Messaging, the IP PBX generally must support the following:
Session Initiation Protocol (SIP) over Transmission Control Protocol (TCP)
T.38 for fax
For a list of supported IP PBXs, see Telephony Advisor for Exchange Server 2007.
However, even if a specific IP PBX supports these protocols, there is no guarantee that the IP PBX will successfully interoperate with Exchange 2007 Unified Messaging.
Correctly configuring your organization's IP PBXs is a difficult deployment task that must be completed to successfully deploy Exchange 2007 Unified Messaging. To help answer questions and give you the most up-to-date IP PBX configuration information, see Telephony Advisor for Exchange Server 2007. That toic gives you IP PBX configuration notes and files that are required to correctly configure your organization's IP PBXs to work with Exchange 2007 Unified Messaging.
Cisco CallManager tracks all active VoIP network components. These components include telephones, gateways, conference bridges, voice mail boxes, and other components. Cisco CallManager frequently uses the Skinny Client Control Protocol (SCCP) as a communications protocol for signaling the hardware endpoints of the system, such as IP-based telephones, or it uses SIP to pass call signaling to IP gateways. Cisco CallManager evaluates numbers that are dialed and activates IP gateway events to receive or send calls to the public switched telephone network (PSTN).
Exchange 2007 Unified Messaging has been tested for use with Cisco CallManager version 5.x. If you have Cisco CallManager 5.x on your network, you will be able to connect Exchange 2007 Unified Messaging servers directly to CallManager without the requirement of an IP gateway. Many of the features that are included with Exchange 2007 Unified Messaging are fully functional with Cisco CallManager 5.x. However, the Message Waiting Indicator (MWI) feature does not work and faxing does not work because the T.38 faxing protocol is not supported by Cisco CallManager.
Due to various limitations, Cisco CallManager 4.x is only appropriate for a test environment that includes direct SIP integration. However, if you want to use Cisco CallManager 4.x with direct SIP integration, you will need to use a SIP media gateway. For more information about Cisco CallManager 4.x and SIP media gateways, see Telephony Advisor for Exchange Server 2007.
Supported IP PBXs
Cisco CallManager version 5.0 has been tested for direct IP interoperability with Exchange 2007 Unified Messaging. For a listing of the PBXs that are supported, see Telephony Advisor for Exchange Server 2007.
New in Exchange SP1
The following is a list of those IP PBXs that are supported in Exchange SP1. For more information about these IP PBXs and configuration information for them, see Telephony Advisor for Exchange Server 2007.
Avaya Communication Manager
Cisco CallManager 5.x and 6.x
Cisco CallManager 5.x and 6.x are supported and directly interoperate with Exchange 2007 SP1 for voice messaging. However, fax receiving does not work correctly when you use CallManager 5.x or 6.x even if you have enabled inband fax tone detection.
Interactive Intelligence CIC
Nortel CS 1000
For fax receiving to work correctly with some IP PBXs, you may need to enable inband fax tone detection by changing the EnableInbandFaxDetection setting to True in the globcfg.xml file. The globcfg.xml file is located in the \Program Files\Microsoft\Exchange\bin folder on an Exchange 2007 computer that has the Unified Messaging server role installed. If you do not configure this setting, Unified Messaging servers must rely on IP gateways to perform inband fax tone detection.
A PBX, sometimes known as a telephone switch or telephone switching device, is a device that connects office telephones in a business to the public telephone network. The central functions of a PBX are to route incoming calls to the appropriate extension in an office, and to share telephone lines between extensions. Users of the PBX share a certain number of outside lines for making telephone calls external to the PBX.
Most medium-size and larger organizations use a PBX because it is much less expensive than connecting an external telephone line to every telephone in the organization. In addition, it is easier to call someone that has an extension number within the same PBX because the number that you dial is typically merely three or four digits.
Correctly configuring your organization's PBXs is frequently one of the more difficult deployment tasks because PBXs are very different and their functionality depends on the PBX model and software that is installed. To help answer questions and give you the most up-to-date PBX configuration information, see Telephony Advisor for Exchange Server 2007. That topic gives you PBX configuration notes and files that are required to correctly configure your organization's PBXs to work with Exchange 2007 Unified Messaging.
For More Information
For more information about the IP gateways that are supported for Exchange 2007 Unified Messaging, see Supported IP Gateways.