Model Filter Syntax and Examples (Analysis Services - Data Mining)

This section provides detailed information about the syntax for model filters, together with sample expressions.

Filter syntax

Filters on case attributes

Filters on nested table attributes

Filters on multiple nested table attributes

Filters attributes missing in nested table

Filters on multiple nested table values

Filters on nested table attributes and EXISTS

Filter combinations

Filters on dates

Filter Syntax

Filter expressions generally are equivalent to the content of a WHERE clause. You can connect multiple conditions by using the logical operators AND, OR, and NOT.

In nested tables, you can also use the EXISTS and NOT EXISTS operators. An EXISTS condition evaluates to true if the subquery returns at least one row. This is useful in cases where you want to restrict the model to cases that contain a particular value in the nested table: for example, customers who have purchased an item at least once.

A NOT EXISTS condition evaluates to true if the condition specified in the subquery does not exist. An example is when you want to restrict the model to customers who have never purchased a particular item.

The general syntax is as follows:

<filter>::=<predicate list>  | ( <predicate list> )
<predicate list>::= <predicate> | [<logical_operator> <predicate list>] 
<logical_operator::= AND| OR
<predicate>::= NOT <predicate>|( <predicate> ) <avPredicate> | <nestedTablePredicate> | ( <predicate> ) 
<avPredicate>::= <columnName> <operator> <scalar> | <columnName> IS [NOT] NULL
<operator>::= = | != | <> | > | >= | < | <=
<nestedTablePredicate>::= EXISTS (<subquery>)
<subquery>::=SELECT * FROM <columnName>[ WHERE  <predicate list> ]
  • filter
    Contains one or more predicates, connected by logical operators.

  • predicate list
    One or more valid filter expressions, separated by logical operators.

  • columnName
    The name of a mining structure column.

  • logical operator
    AND , OR, NOT

  • avPredicate
    Filter expression that can be applied to scalar mining structure column only. An avPredicate expression can be used in both model filters or nested table filters.

    An expression that uses any of the following operators can only be applied to a continuous column. :

    • < (less than)

    • > (greater than)

    • >= (greater than or equal to)

    • <= (less than or equal to)

    Note

    Regardless of the data type, these operators cannot be applied to a column that has the type Discrete, Discretized, or Key.

    An expression that uses any of the following operators can be applied to a continuous, discrete, discretized, or key column:

    • = (equals)

    • != (not equal to)

    • IS NULL

    If the argument, avPredicate, applies to a discretized column, the value used in the filter can be any value in a specific bucket.

    In other words, you do not define the condition as AgeDisc = ’25-35’, but instead compute and then use a value from that interval.

    Example:  AgeDisc = 27   means any value in the same interval as 27, which in this case is 25-35.

  • nestedTablePredicate
    Filter expression that applies to a nested table. Can be used in model filters only.

    The sub-query argument of the argument, nestedTablePredicate, can only apply to a table mining structure column

  • subquery
    A SELECT statement followed by a valid predicate or list of predicates.

    All the predicates must be of the type described in avPredicates. Furthermore, the predicates can refer only to columns that are included in the current nested table, identified by the argument, columnName.

Limitations on Filter Syntax

The following restrictions apply to filters:

  • A filter can contain only simple predicates. These include mathematical operators, scalars, and column names.

  • User-defined functions are not supported in the filter syntax.

  • Non-Boolean operators, such as the plus or minus signs, are not supported in the filter syntax.

Examples of Filters

The following examples demonstrate the use of filters applied to a mining model. If you create the filter expression by using SQL Server Data Tools (SSDT), in the Property window and the Expression pane of the filter dialog box, you would see only the string that appears after the WITH FILTER keywords. Here, the definition of the mining structure is included to make it easier to understand the column type and usage.

Example 1: Typical Case-Level Filtering

This example shows a simple filter that restricts the cases used in the model to customers whose occupation is architect and whose age is over 30.

ALTER MINING STRUCTURE MyStructure  ADD MINING MODEL MyModel_1
(
CustomerId,
Age,
Occupation,
MaritalStatus PREDICT
)
WITH FILTER (Age > 30 AND Occupation=’Architect’)

Back to Top

Example 2: Case-Level Filtering using Nested Table Attributes

If your mining structure contains nested tables, you can either filter on the existence of a value in a nested table, or filter on nested table rows that contain a specific value. This example restricts the cases used for the model to customers over the age of 30 who made at least one purchase that included milk.

As this example shows, it is not necessary that the filter use only columns that are included in the model. The nested table Products is part of the mining structure, but is not included in the mining model. However, you can still filter on values and attributes in the nested table. To view the details of these cases, drillthrough must be enabled.

ALTER MINING STRUCTURE MyStructure  ADD MINING MODEL MyModel_2
(
CustomerId,
Age,
Occupation,
MaritalStatus PREDICT
)
WITH DRILLTHROUGH, 
FILTER (Age > 30 AND EXISTS (SELECT * FROM Products WHERE ProductName=’Milk’)
)

Back to Top

Example 3: Case-Level Filtering on Multiple Nested Table Attributes

This example shows a three-part filter: a condition applies to the case table, another condition to an attribute in the nested table, and another condition on a specific value in one of the nested table columns.

The first condition in the filter, Age > 30, applies to a column in the case table. The remaining conditions apply to the nested table.

The second condition, EXISTS (SELECT * FROM Products WHERE ProductName=’Milk’, checks for the presence of at least one purchase in the nested table that included milk. The third condition, Quantity>=2, means that the customer must have purchased at least two units of milk in a single transaction.

ALTER MINING STRUCTURE MyStructure  ADD MINING MODEL MyModel_3
(
CustomerId,
Age,
Occupation,
MaritalStatus PREDICT,
Products PREDICT
(
ProductName KEY,
Quantity      
)
)
FILTER (Age > 30 AND EXISTS (SELECT * FROM Products WHERE ProductName=’Milk’  AND Quantity >= 2) 
)

Back to Top

Example 4: Case-Level Filtering On Absence of Nested Table Attributes

This example shows how to limit cases to customer who did not purchase a specific item, by filtering on the absence of an attribute in the nested table. In this example, the model is trained using customers over the age of 30 who have never bought milk.

ALTER MINING STRUCTURE MyStructure  ADD MINING MODEL MyModel_4
(
CustomerId,
Age,
Occupation,
MaritalStatus PREDICT,
Products PREDICT
(
ProductName
)
)
FILTER (Age > 30 AND NOT EXISTS (SELECT * FROM Products WHERE ProductName=’Milk’) )

Back to Top

Example 5: Filtering on Multiple Nested Table Values

The purpose of the example is to show nested table filtering. The nested table filter is applied after the case filter, and only restricts nested table rows.

This model could contain multiple cases with empty nested tables because EXISTS is not specified.

ALTER MINING STRUCTURE MyStructure  ADD MINING MODEL MyModel_5
(
CustomerId,
Age,
Occupation,
MaritalStatus PREDICT,
Products PREDICT
(
ProductName KEY,
Quantity      
) WITH FILTER(ProductName=’Milk’ OR ProductName=’bottled water’)
)
WITH DRILLTHROUGH

Back to Top

Example 6: Filtering on Nested Table Attributes and EXISTS

In this example, the filter on the nested table restricts the rows to those that contain either milk or bottled water. Then, the cases in the model are restricted by using an EXISTS statement. This makes sure that the nested table is not empty.

ALTER MINING STRUCTURE MyStructure  ADD MINING MODEL MyModel_6
(
CustomerId,
Age,
Occupation,
MaritalStatus PREDICT,
Products PREDICT
(
ProductName KEY,
Quantity      
) WITH FILTER(ProductName=’Milk’ OR ProductName=’bottled water’)
)
FILTER (EXISTS (Products))

Back to Top

Example 7: Complex Filter Combinations

The scenario for this model resembles that of Example 4, but is far more complex. The nested table, ProductsOnSale, has the filter condition (OnSale) meaning that the value of OnSale must be true for the product listed in ProductName. Here, OnSale is a structure column.

The second part of the filter, for ProductsNotOnSale, repeats this syntax, but filters on products for which the value of OnSale is not true (!OnSale).

Finally, the conditions are combined and one additional restriction is added to the case table. The result is to predict purchases of products in the ProductsNotOnSale list, based on the cases that are included in the ProductsOnSale list, for all customers over the age of 25.

ALTER MINING STRUCTURE MyStructure ADD MINING MODEL MyModel_7

(

CustomerId,

Age,

Occupation,

MaritalStatus,

ProductsOnSale

(

ProductName KEY

) WITH FILTER(OnSale),

ProductsNotOnSale PREDICT ONLY

(

ProductName KEY

) WITH FILTER(!OnSale)

)

WITH DRILLTHROUGH,

FILTER (EXISTS (ProductsOnSale) AND EXISTS(ProductsNotOnSale) AND Age > 25)

Back to Top

Example 8: Filtering on Dates

You can filter input columns on dates, as you would any other data. Dates contained in a column of type date/time are continuous values; therefore, you can specify a date range by using operators such as greater than (>) or less than (<). If your data source does not represent dates by a Continuous data type, but as discrete or text values, you cannot filter on a date range, but must specify individual discrete values.

However, you cannot create a filter on the date column in a time series model if the date column used for the filter is also the key column for the model. That is because, in time series models and sequence clustering models, the date column might be handled as type KeyTime or KeySequence.

If you need to filter on continuous dates in a time series model, you can create a copy of the column in the mining structure, and filter the model on the new column.

For example, the following expression represents a filter on a date column of type Continuous that has been added to the Forecasting model.

=[DateCopy] > '12:31:2003:00:00:00'

Note

Note that any extra columns that you add to the model might affect the results. Therefore, if you do not want the column to be used in computation of the series, you should add the column only to the mining structure, and not to the model. You can also set the model flag on the column to PredictOnly or to Ignore. For more information, see Modeling Flags (Data Mining).

For other model types, you can use dates as input criteria or filter criteria just like you would in any other column. However, if you need to use a specific level of granularity that is not supported by a Continuous data type, you can create a derived value in the data source by using expressions to extract the unit to use in filtering and analysis.

Warning

When you specify a dates as filter criteria, you must use the following format, regardless of the date format for the current OS: mm/dd/yyyy. Any other format results in an error.

For example, if you want to filter your call center results to show only weekends, you can create an expression in the data source view that extracts the weekday name for each date, and then use that weekday name value for input or as a discrete value in filtering. Just remember that repeating values can affect the model, so you should use only one of the columns, not the date column plus the derived value.

Back to Top

See Also

Concepts

Filters for Mining Models (Analysis Services - Data Mining)

Testing and Validation (Data Mining)