Verify that MFP devices with multiple identical ports expose the same functionality on all ports (MANUAL)
Note This content applies to the Windows Logo Kit (WLK). For the latest information using the new Windows Hardware Certification Kit (HCK), see Windows HCK User's Guide on the Windows Hardware Dev Center.
Type: Manual Test
Overview
The purpose of this test is to ensure that an MFP device with multiple identical ports expose the same functionality on all ports. For example, if an MFP (printer and scanner) has two USB ports, both ports should be able to print and scan. An MFP that exposes print functionality on one port and scan functionality on the other port will fail this test.
Details
This requirement still allows devices to use USB ports for ?PictBridge? or another picture data protocol. For example, an MFP may contain two USB ports with different functionality, where one USB port is for MFP functionality and one port is for ?PictBridge.? However, there must be a clear distinction in functionality on the MFP for each port.
Run Time: 1 minute
Log File: None
System Restart Required: No
Test Category: Printing
Supported operating systems for Logo or Signature testing:
Windows 7
Windows Server 2008 R2
Windows Vista
Windows Server 2008
Windows XP
Windows Server 2003
Program: SMTaske.exe
Requirements
Software Requirements
The test tool requires the following software:
Supported operating system (see list above)
Software components included with the device that is being tested
Hardware Requirements
The test tool requires the following hardware:
Device to be tested
Computer that meets the minimum software requirements
Windows keyboard
Two-button pointing device
Color display monitor capable of at least 1024 by 768 resolution, 32-bits per pixel, 60 Hz
Hard drive with a minimum of 20 GB available on partition C:
Processor
The test tool runs on the following processor architectures:
x86
x64
IA64
Running the Test
The "Verify that MFP devices with multiple identical ports expose the same functionality on all ports (MANUAL)" tool returns PASS or FAIL, based on user input.
Command Syntax
Command option | Description |
---|---|
SMTask.exe |
The test displays the question text. |
Troubleshooting
The test will ask ?If this device has multiple, identical physical ports (For example, two USB-B connectors; disregard modem ports), do each of these ports expose the same set of functions (print, scan, fax, storage)?? It will then wait for a button push (Pass, Fail, NotApplicable), and write a WTT pass/fail result.
Code Tour
File Manifest
File | Location |
---|---|
SMTask.exe |
[TestBinRoot]\NTTEST\DRIVERSTEST\WDKTools\SMTASK.exe |
Build date: 9/14/2012