Define network locations as boundaries for System Center Configuration Manager

Applies to: System Center Configuration Manager (Current Branch)

Configuration Manager boundaries are locations on your network that contain devices that you want to manage. The boundary a device is on is equivalent to the Active Directory site, or network IP address that is identified by the Configuration Manager client that is installed on the device.

  • You can manually create individual boundaries. However, Configuration Manager does not support the direct entry of a supernet as a boundary. Instead, use the IP address range boundary type.
  • You can configure the Active Directory Forest Discovery method to auto-discover and create boundaries for each IP Subnet and Active Directory Site it discovers. When Active Directory Forest Discovery identifies a supernet that is assigned to an Active Directory site, Configuration Manager converts the supernet into an IP address range boundary.

It is not uncommon for a device to use an IP address that the Configuration Manager administrator is not aware of. When the network location of a device is in doubt, confirm what the device reports as its location by using the IPCONFIG command on the device.

When you create a boundary, it automatically receives a name that is based upon the type and scope of the boundary. You cannot modify this name. Instead, you can specify a description to help identify the boundary in the Configuration Manager console.

Each boundary is available for use by every site in your hierarchy. After a boundary has been created, you can modify its properties to do the following:

  • Add the boundary to one or more boundary groups.
  • Change the type or scope of the boundary.
  • View the boundaries Site Systems tab to see which site system servers (distribution points, state migration points, and management points) are associated with the boundary.

To create a boundary

  1. In the Configuration Manager console, click Administration > Hierarchy Configuration > Boundaries

  2. On the Home tab, in the Create group, click Create Boundary.

  3. On the General tab of the Create Boundary dialog box you can specific a Description to identify the boundary by a friendly name or reference.

  4. Select a Type for this boundary:

    • If you select IP Subnet, you must specify a Subnet ID for this boundary.

      Tip

      You can specify the Network and Subnet mask to have the Subnet ID automatically specified. When you save the boundary, only the Subnet ID value is saved.

    • If you select Active Directory site, you must specify or Browse to an Active Directory site in the local forest of the site server.

      Important

      When you specify an Active Directory site for a boundary, the boundary includes each IP Subnet that is a member of that Active Directory site. If the configuration of the Active Directory site changes in Active Directory, the network locations included in this boundary also change.

    • If you select IPv6 prefix, you must specify a Prefix in the IPv6 prefix format.

    • If you select IP address range, you must specify a Starting IP address and Ending IP address that includes part of an IP Subnet or includes multiple IP Subnets.

  5. Click OK to save the new boundary.

To configure a boundary

  1. In the Configuration Manager console, click Administration > Hierarchy Configuration > Boundaries

  2. Select the boundary you want to modify.

  3. On the Home tab, in the Properties group, click Properties.

  4. In the Properties dialog box for the boundary, select the General tab to edit the Description or Type for the boundary. You can also change the scope of a boundary by editing the network locations for the boundary. For example, for an Active Directory site boundary you can specify a new Active Directory site name.

  5. Select the Site Systems tab to view the site systems that are associated with this boundary. You cannot change this configuration from the properties of a boundary.

    Tip

    For a site system server to be listed as a site system for a boundary, the site system server must be associated as a site system server for at least one boundary group that includes this boundary. This is configured on the References tab of a boundary group.

  6. Select the Boundary Groups tab to modify the boundary group membership for this boundary:

    • To add this boundary to one or more boundary groups, click Add, select the check box for one or more boundary groups, and then click OK.

    • To remove this boundary from a boundary group, select the boundary group and click Remove.

  7. Click OK to close the boundary properties and save the configuration.