Security Bulletin

Microsoft Security Bulletin MS06-072 - Critical

Cumulative Security Update for Internet Explorer (925454)

Published: December 12, 2006 | Updated: December 14, 2006

Version: 1.1

Summary

Who Should Read this Document: Customers who use Microsoft Windows

Impact of Vulnerability: Remote Code Execution

Maximum Severity Rating: Critical

Recommendation: Customers should apply the update immediately.

Security Update Replacement: This bulletin replaces several prior security updates. See the frequently asked questions (FAQ) section of this bulletin for the complete list.

Caveats: Microsoft Knowledge Base Article 925454 documents the currently known issues that customers may experience when they install this security update. The article also documents recommended solutions for these issues. For more information, see Microsoft Knowledge Base Article 925454.

Tested Software and Security Update Download Locations:

Affected Software:

  • Microsoft Windows 2000 Service Pack 4
  • Microsoft Windows XP Service Pack 2
  • Microsoft Windows XP Professional x64 Edition
  • Microsoft Windows Server 2003 and Microsoft Windows Server 2003 Service Pack 1
  • Microsoft Windows Server 2003 for Itanium-based Systems and Microsoft Windows Server 2003 with SP1 for Itanium-based Systems
  • Microsoft Windows Server 2003 x64 Edition

Non-Affected Software:

  • Windows Vista

Tested Microsoft Windows Components:

Affected Components:

  • Microsoft Internet Explorer 5.01 Service Pack 4 on Windows 2000 Service Pack 4 — Download the update
  • Microsoft Internet Explorer 6 Service Pack 1 when installed on Windows 2000 Service Pack 4 — Download the update
  • Microsoft Internet Explorer 6 for Windows XP Service Pack 2 — Download the update
  • Microsoft Internet Explorer 6 for Windows XP Professional x64 Edition — Download the update
  • Microsoft Internet Explorer 6 for Windows Server 2003 and Microsoft Windows Server 2003 Service Pack 1 — Download the update
  • Microsoft Internet Explorer 6 for Windows Server 2003 for Itanium-based Systems and Windows Server 2003 with SP1 for Itanium-based Systems — Download the update
  • Microsoft Internet Explorer 6 for Windows Server 2003 x64 Edition — Download the update

Non-Affected Components:

  • Windows Internet Explorer 7 for Windows XP Service Pack 2
  • Windows Internet Explorer 7 for Windows XP Professional x64 Edition
  • Windows Internet Explorer 7 for Windows Server 2003 Service Pack 1
  • Windows Internet Explorer 7 for Windows Server 2003 with SP1 for Itanium-based Systems
  • Windows Internet Explorer 7 for Windows Server 2003 x64 Edition
  • Windows Internet Explorer 7 in Windows Vista

The software in this list has been tested to determine whether the versions are affected. Other versions either no longer include security update support or may not be affected. To determine the support life cycle for your product and version, visit the Microsoft Support Lifecycle Web site.

Note The security updates for Microsoft Windows Server 2003, Windows Server 2003 Service Pack 1, and Windows Server 2003 x64 Edition also apply to Windows Server 2003 R2.

General Information

Executive Summary

Executive Summary:

This update resolves several newly discovered vulnerabilities. Each vulnerability is documented in its own subsection in the "Vulnerability Details" section of this bulletin.

If a user is logged on with administrative user rights, an attacker who successfully exploited the most severe of these vulnerabilities could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

We recommend that customers apply the update immediately.

Vulnerability Identifiers Impact of Vulnerability Internet Explorer 5.01 Service Pack 4 on Windows 2000 Service Pack 4 Internet Explorer 6 Service Pack 1 when installed on Windows 2000 Service Pack 4 Internet Explorer 6 for Windows Server 2003 and Windows Server 2003 Service Pack 1 Internet Explorer 6 for Windows XP Service Pack 2
Script Error Handling Memory Corruption Vulnerability - CVE-2006-5579 Remote Code Execution None Critical Moderate Critical
DHTML Script Function Memory Corruption Vulnerability - CVE-2006-5581 Remote Code Execution None Critical Moderate Critical
TIF Folder Information Disclosure Vulnerability - CVE-2006-5578 Information Disclosure Important Important Low Important
TIF Folder Information Disclosure Vulnerability - CVE-2006-5577 Information Disclosure Moderate Moderate Low Moderate
Aggregate Severity of All Vulnerabilities Important Critical Moderate Critical

This assessment is based on the types of systems that are affected by the vulnerability, their typical deployment patterns, and the effect that exploiting the vulnerability would have on them.

Note The security updates for Windows Server 2003, Windows Server 2003 Service Pack 1, and Windows Server 2003 x64 Edition also apply to Windows Server 2003 R2.

Note The severity ratings for non-x86 operating system versions map to the x86 operating systems versions as follows:

  • The Internet Explorer 6 for Windows XP Professional x64 Edition severity rating is the same as the Internet Explorer 6 for Windows XP Service Pack 2 severity rating.
  • The Internet Explorer 6 for Windows Server 2003 for Itanium-based Systems and Windows Server 2003 x64 Edition severity rating is the same as the Internet Explorer 6 for Windows Server 2003 severity rating.

Why does this update address several reported security vulnerabilities?
This update contains support for several vulnerabilities because the modifications that are required to address these issues are located in related files. Instead of having to install several updates that are almost the same, customers can install only this update

What updates does this release replace?
This security update replaces a prior security update. The security bulletin ID and affected operating systems are listed in the following table.

Bulletin ID Internet Explorer 5.01 Service Pack 4 on Windows 2000 Service Pack 4 Internet Explorer 6 Service Pack 1 when installed on Windows 2000 Service Pack 4 Internet Explorer 6 for Windows Server 2003 and Windows Server 2003 Service Pack 1 Internet Explorer 6 for Windows XP Service Pack 2
MS06-067 Replaced Replaced Replaced Replaced

What are the known issues that customers may experience when they install this security update?
Microsoft Knowledge Base Article 925454 documents the currently known issues that customers may experience when they install this security update. The article also documents recommended solutions for these issues. For more information, see Microsoft Knowledge Base Article 925454.

Does this update contain any security-related changes to functionality?
Yes. Besides the changes that are listed in the "Vulnerability Details" section of this bulletin, this update includes improvements to the Internet Explorer Pop-up Blocker. The Pop-up Blocker was first included in Windows XP Service Pack 2 and is also included in Windows Server 2003 Service Pack 1. For more information about the Pop-up Blocker, see the product documentation.

Does this update contain any changes to functionality?
Yes. Besides the changes that are listed in the “Vulnerability Details” section of this bulletin, there are also changes not related to security that were introduced in previous Internet Explorer bulletins.

Extended security update support for Microsoft Windows XP Home Edition Service Pack 1 or Service Pack 1a, Windows XP Media Center Edition 2002 Service Pack 1, Windows XP Media Center Edition 2004 Service Pack 1, Windows XP Professional Service Pack 1 or Service Pack 1a, and Windows XP Tablet PC Edition Service Pack 1 ended on October 10, 2006. I am still using one of these operating systems; what should I do?
Windows XP (all versions) Service Pack 1 has reached the end of its support life cycle. It should be a priority for customers who have these operating system versions to migrate to supported versions to prevent potential exposure to vulnerabilities. For more information about the Windows Product Lifecycle, visit the following Microsoft Support Lifecycle Web site. For more information about the extended security update support period for these operating system versions, visit the Microsoft Product Support Services Web site.

Extended security update support for Microsoft Windows 98, Windows 98 Second Edition, or Windows Millennium Edition ended on July 11, 2006. I am still using one of these operating systems; what should I do?
Windows 98, Windows 98 Second Edition, and Windows Millennium Edition have reached the end of their support life cycles. It should be a priority for customers who have these operating system versions to migrate to supported versions to prevent potential exposure to vulnerabilities. For more information about the Windows Product Lifecycle, visit the following Microsoft Support Lifecycle Web site. For more information about the extended security update support period for these operating system versions, visit the Microsoft Product Support Services Web site.

Extended security update support for Microsoft Windows NT Workstation 4.0 Service Pack 6a and Windows 2000 Service Pack 2 ended on June 30, 2004. Extended security update support for Microsoft Windows NT Server 4.0 Service Pack 6a ended on December 31, 2004. Extended security update support for Microsoft Windows 2000 Service Pack 3 ended on June 30, 2005. I am still using one of these operating systems; what should I do?
Windows NT Workstation 4.0 Service Pack 6a, Windows NT Server 4.0 Service Pack 6a, Windows 2000 Service Pack 2, and Windows 2000 Service Pack 3 have reached the end of their support life cycles. It should be a priority for customers who have these operating system versions to migrate to supported versions to prevent potential exposure to vulnerabilities. For more information about the Windows Product Lifecycle, visit the following Microsoft Support Lifecycle Web site. For more information about the extended security update support period for these operating system versions, visit the Microsoft Product Support Services Web site.

Customers who require custom support for these products must contact their Microsoft account team representative, their Technical Account Manager, or the appropriate Microsoft partner representative for custom support options. Customers without an Alliance, Premier, or Authorized Contract can contact their local Microsoft sales office. For contact information, visit the Microsoft Worldwide Information Web site, select the country, and then click Go to see a list of telephone numbers. When you call, ask to speak with the local Premier Support sales manager. For more information, see the Windows Operating System Product Support Lifecycle FAQ.

Can I use the Microsoft Baseline Security Analyzer (MBSA) to determine whether this update is required?
The following table provides the MBSA detection summary for this security update.

Software MBSA 1.2.1 MBSA 2.0
Microsoft Windows 2000 Service Pack 4 Yes Yes
Microsoft Windows XP Service Pack 2 Yes Yes
Microsoft Windows XP Professional x64 Edition No Yes
Microsoft Windows Server 2003 and Microsoft Windows Server 2003 Service Pack 1 Yes Yes
Microsoft Windows Server 2003 for Itanium-based Systems and Microsoft Windows Server 2003 with Service Pack 1 for Itanium-based Systems No Yes
Microsoft Windows Server 2003 x64 Edition family No Yes

For more information about MBSA, visit the MBSA Web site. For more information about the programs that Microsoft Update and MBSA 2.0 currently do not detect, see Microsoft Knowledge Base Article 895660.

For more detailed information, see Microsoft Knowledge Base Article 910723.

Can I use Systems Management Server (SMS) to determine whether this update is required?
The following table provides the SMS detection summary for this security update.

Software SMS 2.0 SMS 2003
Microsoft Windows 2000 Service Pack 4 Yes Yes
Microsoft Windows XP Service Pack 2 Yes Yes
Microsoft Windows XP Professional x64 Edition No Yes
Microsoft Windows Server 2003 and Microsoft Windows Server 2003 Service Pack 1 Yes Yes
Microsoft Windows Server 2003 for Itanium-based Systems and Microsoft Windows Server 2003 with Service Pack 1 for Itanium-based Systems No Yes
Microsoft Windows Server 2003 x64 Edition family No Yes

For SMS 2.0, the SMS SUS Feature Pack, which includes the Security Update Inventory Tool (SUIT), can be used by SMS to detect security updates. SMS SUIT uses the MBSA 1.2.1 engine for detection. For more information about SUIT, visit the following Microsoft Web site. For more information about the limitations of SUIT, see Microsoft Knowledge Base Article 306460. The SMS SUS Feature Pack also includes the Microsoft Office Inventory Tool to detect required updates for Microsoft Office applications.

For SMS 2003, the SMS 2003 Inventory Tool for Microsoft Updates (ITMU) can be used by SMS to detect security updates that are offered by Microsoft Update and that are supported by Windows Server Update Services. For more information about the SMS 2003 ITMU, visit the following Microsoft Web site. SMS 2003 can also use the Microsoft Office Inventory Tool to detect required updates for Microsoft Office applications.

For more information about SMS, visit the SMS Web site.

For more detailed information, see Microsoft Knowledge Base Article 910723.

Vulnerability Details

Script Error Handling Memory Corruption Vulnerability - CVE-2006-5579:

A remote code execution vulnerability exists in Internet Explorer due to attempts to access previously freed memory when handling script errors in certain situations. An attacker could exploit the vulnerability by constructing a specially crafted Web page. If a user viewed the Web page, the vulnerability could allow remote code execution. An attacker who successfully exploited this vulnerability could take complete control of an affected system.

Mitigating Factors for Script Error Handling Memory Corruption Vulnerability - CVE-2006-5579:

  • In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content or advertisements could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to persuade users to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes users to the attacker's Web site.
  • An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
  • By default, all supported versions of Microsoft Outlook and Microsoft Outlook Express open HTML e-mail messages in the Restricted sites zone. The Restricted sites zone helps reduce attacks that could try to exploit this vulnerability by preventing Active Scripting and ActiveX controls from being used when reading HTML e-mail. However, if a user clicks on a link within an e-mail they could still be vulnerable to this issue through the Web-based attack scenario.
  • By default, Internet Explorer on Windows Server 2003 runs in a restricted mode that is known as Enhanced Security Configuration. This mode sets the security level for the Internet zone to High. This is a mitigating factor for Web sites that have not been added to Internet Explorer Trusted sites zone. See the FAQ section of this security update for more information about Internet Explorer Enhanced Security Configuration.
  • Windows Internet Explorer 7 for Windows XP Service Pack 2, Windows Internet Explorer 7 for Windows XP Professional x64 Edition, Windows Internet Explorer 7 for Windows Server 2003 Service Pack 1, Windows Internet Explorer 7 for Windows Server 2003 with SP1 for Itanium-based Systems, Windows Internet Explorer 7 for Windows Server 2003 x64 Edition, and Windows Internet Explorer 7 in Windows Vista are not affected by this vulnerability.
  • Microsoft Internet Explorer 5.01 Service Pack 4 on Windows 2000 Service Pack 4 is not affected by this vulnerability.

Workarounds for Script Error Handling Memory Corruption Vulnerability - CVE-2006-5579:

Microsoft has tested the following workarounds. Although these workarounds will not correct the underlying vulnerability, they help block known attack vectors. When a workaround reduces functionality, it is identified in the following section.

  • Configure Internet Explorer to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone

    You can help protect against this vulnerability by changing your settings to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone. To do this, follow these steps:

    1. In Internet Explorer, click Internet Options on the Tools menu.
    2. Click the Security tab.
    3. Click Internet, and then click Custom Level.
    4. Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.
    5. Click Local intranet, and then click Custom Level.
    6. Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.
    7. Click OK two times to return to Internet Explorer.

    Note Disabling Active Scripting in the Internet and Local intranet security zones may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly.

    Impact of Workaround: There are side effects to prompting before running Active Scripting. Many Web sites that are on the Internet or on an intranet use Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use Active Scripting to provide menus, ordering forms, or even account statements. Prompting before running Active Scripting is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run Active Scripting. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone”.

    Add sites that you trust to the Internet Explorer Trusted sites zone

    After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

    To do this, follow these steps:

    1. In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.
    2. In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.
    3. If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.
    4. In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.
    5. Repeat these steps for each site that you want to add to the zone.
    6. Click OK two times to accept the changes and return to Internet Explorer.

    Note Add any sites that you trust not to take malicious action on your computer. Two in particular that you may want to add are "*.windowsupdate.microsoft.com" and “*.update.microsoft.com” (without the quotation marks). These are the sites that will host the update, and it requires an ActiveX Control to install the update.

  • Set Internet and Local intranet security zone settings to “High” to prompt before running ActiveX Controls and Active Scripting in these zones

    You can help protect against this vulnerability by changing your settings for the Internet security zone to prompt before running ActiveX controls. You can do this by setting your browser security to High.

    To raise the browsing security level in Microsoft Internet Explorer, follow these steps:

    1. On the Internet Explorer Tools menu, click Internet Options.
    2. In the Internet Options dialog box, click the Security tab, and then click the Internet icon.
    3. Under Security level for this zone, move the slider to High. This sets the security level for all Web sites you visit to High.

    Note If no slider is visible, click Default Level, and then move the slider to High.

    Note Setting the level to High may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly even with the security setting set to High.

    Impact of Workaround: There are side effects to prompting before running ActiveX Controls and Active Scripting. Many Web sites that are on the Internet or on an intranet use ActiveX or Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX Controls to provide menus, ordering forms, or even account statements. Prompting before running ActiveX Controls or Active Scripting is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run ActiveX Controls or Active Scripting. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone”.

    Add sites that you trust to the Internet Explorer Trusted sites zone

    After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

    To do this, follow these steps:

    1. In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.
    2. In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.
    3. If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.
    4. In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.
    5. Repeat these steps for each site that you want to add to the zone.
    6. Click OK two times to accept the changes and return to Internet Explorer.

    Note Add any sites that you trust not to take malicious action on your computer. Two in particular that you may want to add are "*.windowsupdate.microsoft.com" and “*.update.microsoft.com” (without the quotation marks). These are the sites that will host the update, and it requires an ActiveX Control to install the update.

FAQ for Script Error Handling Memory Corruption Vulnerability - CVE-2006-5579:

What is the scope of the vulnerability?
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could remotely take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

If a user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

What causes the vulnerability?
Internet Explorer attempts to access previously freed memory when handling script errors in certain situations. As a result, system memory may be corrupted in such a way that an attacker could execute arbitrary code.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited these vulnerabilities could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

How could an attacker exploit the vulnerability?
An attacker could host a specially crafted Web site that is designed to exploit these vulnerabilities through Internet Explorer and then persuade a user to view the Web site. This can also include Web sites that accept user-provided content or advertisements, Web sites that host user-provided content or advertisements, and compromised Web sites. These Web sites could contain specially crafted content that could exploit these vulnerabilities. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to persuade users to visit the Web site, typically by getting them to click a link in an e-mail message or in an Instant Messenger message that takes users to the attacker's Web site. It could also be possible to display specially crafted Web content by using banner advertisements or by using other methods to deliver Web content to affected systems.

What systems are primarily at risk from the vulnerability?
This vulnerability requires that a user is logged on and visits a Web site for any malicious action to occur. Therefore, any systems where Internet Explorer is used frequently, such as workstations or terminal servers, are at the most risk from these vulnerabilities.

I am running Internet Explorer on Windows Server 2003. Does this mitigate these vulnerabilities?
Yes. By default, Internet Explorer on Windows Server 2003 runs in a restricted mode that is known as Enhanced Security Configuration. This mode sets the security level for the Internet zone to High. This is a mitigating factor for Web sites that have not been added to Internet Explorer Trusted sites zone.

What is the Internet Explorer Enhanced Security Configuration?
Internet Explorer Enhanced Security Configuration is a group of preconfigured Internet Explorer settings that reduce the likelihood of a user or of an administrator downloading and running specially crafted Web content on a server. Internet Explorer Enhanced Security Configuration reduces this risk by modifying many security-related settings. This includes the settings on the Security tab and the Advanced tab in the Internet Options dialog box. Some of the important modifications include the following:

  • Security level for the Internet zone is set to High. This setting disables scripts, ActiveX controls, Microsoft Java Virtual Machine (MSJVM), and file downloads.
  • Automatic detection of intranet sites is disabled. This setting assigns all intranet Web sites and all Universal Naming Convention (UNC) paths that are not explicitly listed in the Local intranet zone to the Internet zone.
  • Install On Demand and non-Microsoft browser extensions are disabled. This setting prevents Web pages from automatically installing components and prevents non-Microsoft extensions from running.
  • Multimedia content is disabled. This setting prevents music, animations, and video clips from running.

For more information regarding Internet Explorer Enhanced Security Configuration, see the guide, Managing Internet Explorer Enhanced Security Configuration, at the following Web site.

What does the update do?
The update removes the vulnerability by modifying the script error exception handling so that there is no attempt made to access the freed memory.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through responsible disclosure.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers and had not seen any examples of proof of concept code published when this security bulletin was originally issued.

DHTML Script Function Memory Corruption Vulnerability - CVE-2006-5581:

A remote code execution vulnerability exists in the way Internet Explorer interprets certain DHTML script function calls to incorrectly created elements. An attacker could exploit the vulnerability by constructing a specially crafted Web page that could potentially allow remote code execution if a user viewed the Web page. An attacker who successfully exploited this vulnerability could take complete control of an affected system.

Mitigating Factors for DHTML Script Function Memory Corruption Vulnerability - CVE-2006-5581:

  • In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content or advertisements could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to persuade users to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes users to the attacker's Web site.
  • An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
  • By default, all supported versions of Microsoft Outlook and Microsoft Outlook Express open HTML e-mail messages in the Restricted sites zone. The Restricted sites zone helps reduce attacks that could try to exploit this vulnerability by preventing Active Scripting and ActiveX controls from being used when reading HTML e-mail. However, if a user clicks on a link within an e-mail they could still be vulnerable to this issue through the Web-based attack scenario.
  • By default, Internet Explorer on Windows Server 2003 runs in a restricted mode that is known as Enhanced Security Configuration. This mode sets the security level for the Internet zone to High. This is a mitigating factor for Web sites that have not been added to Internet Explorer Trusted sites zone. See the FAQ section of this security update for more information about Internet Explorer Enhanced Security Configuration.
  • Windows Internet Explorer 7 for Windows XP Service Pack 2, Windows Internet Explorer 7 for Windows XP Professional x64 Edition, Windows Internet Explorer 7 for Windows Server 2003 Service Pack 1, Windows Internet Explorer 7 for Windows Server 2003 with SP1 for Itanium-based Systems, Windows Internet Explorer 7 for Windows Server 2003 x64 Edition, and Windows Internet Explorer 7 in Windows Vista are not affected by this vulnerability.
  • Microsoft Internet Explorer 5.01 Service Pack 4 on Windows 2000 Service Pack 4 is not affected by this vulnerability.

Workarounds for DHTML Script Function Memory Corruption Vulnerability - CVE-2006-5581:

Microsoft has tested the following workarounds. Although these workarounds will not correct the underlying vulnerability, they help block known attack vectors. When a workaround reduces functionality, it is identified in the following section.

  • Configure Internet Explorer to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone

    You can help protect against this vulnerability by changing your settings to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone. To do this, follow these steps:

    1. In Internet Explorer, click Internet Options on the Tools menu.
    2. Click the Security tab.
    3. Click Internet, and then click Custom Level.
    4. Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.
    5. Click Local intranet, and then click Custom Level.
    6. Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.
    7. Click OK two times to return to Internet Explorer.

    Note Disabling Active Scripting in the Internet and Local intranet security zones may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly.

    Impact of Workaround: There are side effects to prompting before running Active Scripting. Many Web sites that are on the Internet or on an intranet use Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use Active Scripting to provide menus, ordering forms, or even account statements. Prompting before running Active Scripting is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run Active Scripting. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone”.

    Add sites that you trust to the Internet Explorer Trusted sites zone.

    After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

    To do this, follow these steps:

    1. In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.
    2. In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.
    3. If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.
    4. In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.
    5. Repeat these steps for each site that you want to add to the zone.
    6. Click OK two times to accept the changes and return to Internet Explorer.

    Note Add any sites that you trust not to take malicious action on your computer. Two in particular that you may want to add are "*.windowsupdate.microsoft.com" and “*.update.microsoft.com” (without the quotation marks). These are the sites that will host the update, and it requires an ActiveX Control to install the update.

  • Set Internet and Local intranet security zone settings to “High” to prompt before running ActiveX Controls and Active Scripting in these zones

    You can help protect against this vulnerability by changing your settings for the Internet security zone to prompt before running ActiveX controls and Active Scripting. You can do this by setting your browser security to High.

    To raise the browsing security level in Microsoft Internet Explorer, follow these steps:

    1. On the Internet Explorer Tools menu, click Internet Options.
    2. In the Internet Options dialog box, click the Security tab, and then click the Internet icon.
    3. Under Security level for this zone, move the slider to High. This sets the security level for all Web sites you visit to High.

    Note If no slider is visible, click Default Level, and then move the slider to High.

    Note Setting the level to High may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly even with the security setting set to High.

    Impact of Workaround: There are side effects to prompting before running ActiveX Controls and Active Scripting. Many Web sites that are on the Internet or on an intranet use ActiveX or Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX Controls to provide menus, ordering forms, or even account statements. Prompting before running ActiveX Controls or Active Scripting is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run ActiveX Controls or Active Scripting. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone”

    Add sites that you trust to the Internet Explorer Trusted sites zone.

    After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

    To do this, follow these steps:

    1. In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.
    2. In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.
    3. If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.
    4. In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.
    5. Repeat these steps for each site that you want to add to the zone.
    6. Click OK two times to accept the changes and return to Internet Explorer.

    Note Add any sites that you trust not to take malicious action on your computer. Two in particular that you may want to add are "*.windowsupdate.microsoft.com" and “*.update.microsoft.com” (without the quotation marks). These are the sites that will host the update, and it requires an ActiveX Control to install the update.

FAQ for DHTML Script Function Memory Corruption Vulnerability - CVE-2006-5581:

What is the scope of the vulnerability?
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could remotely take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

If a user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

What causes the vulnerability?
When Internet Explorer interprets certain DHTML script function calls to incorrectly created elements it may corrupt system memory in such a way that an attacker could execute arbitrary code.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited these vulnerabilities could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

How could an attacker exploit the vulnerability?
An attacker could host a specially crafted Web site that is designed to exploit these vulnerabilities through Internet Explorer and then persuade a user to view the Web site. This can also include Web sites that accept user-provided content or advertisements, Web sites that host user-provided content or advertisements, and compromised Web sites. These Web sites could contain specially crafted content that could exploit these vulnerabilities. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to persuade users to visit the Web site, typically by getting them to click a link in an e-mail message or in an Instant Messenger message that takes users to the attacker's Web site. It could also be possible to display specially crafted Web content by using banner advertisements or by using other methods to deliver Web content to affected systems.

What systems are primarily at risk from the vulnerability?
This vulnerability requires that a user is logged on and visits a Web site for any malicious action to occur. Therefore, any systems where Internet Explorer is used frequently, such as workstations or terminal servers, are at the most risk from these vulnerabilities.

I am running Internet Explorer on Windows Server 2003. Does this mitigate these vulnerabilities?
Yes. By default, Internet Explorer on Windows Server 2003 runs in a restricted mode that is known as Enhanced Security Configuration. This mode sets the security level for the Internet zone to High. This is a mitigating factor for Web sites that have not been added to Internet Explorer Trusted sites zone.

What is the Internet Explorer Enhanced Security Configuration?
Internet Explorer Enhanced Security Configuration is a group of preconfigured Internet Explorer settings that reduce the likelihood of a user or of an administrator downloading and running specially crafted Web content on a server. Internet Explorer Enhanced Security Configuration reduces this risk by modifying many security-related settings. This includes the settings on the Security tab and the Advanced tab in the Internet Options dialog box. Some of the important modifications include the following:

  • Security level for the Internet zone is set to High. This setting disables scripts, ActiveX controls, Microsoft Java Virtual Machine (MSJVM), and file downloads.
  • Automatic detection of intranet sites is disabled. This setting assigns all intranet Web sites and all Universal Naming Convention (UNC) paths that are not explicitly listed in the Local intranet zone to the Internet zone.
  • Install On Demand and non-Microsoft browser extensions are disabled. This setting prevents Web pages from automatically installing components and prevents non-Microsoft extensions from running.
  • Multimedia content is disabled. This setting prevents music, animations, and video clips from running.

For more information regarding Internet Explorer Enhanced Security Configuration, see the guide, Managing Internet Explorer Enhanced Security Configuration, at the following Web site.

What does the update do?
The update removes the vulnerability by modifying the way that Internet Explorer handles the DHTML script function call.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through responsible disclosure.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers and had not seen any examples of proof of concept code published when this security bulletin was originally issued.

TIF Folder Information Disclosure Vulnerability - CVE-2006-5578

An information disclosure vulnerability exists in Internet Explorer in the way that drag and drop operations are handled in certain situations. An attacker could exploit the vulnerability by constructing a specially crafted Web page that could allow for information disclosure if a user viewed and interacted with the Web page. An attacker who successfully exploited this vulnerability would be able to retrieve files from the Temporary Internet Files (TIF) folder on a user’s system.

Mitigating Factors for TIF Folder Information Disclosure Vulnerability - CVE-2006-5578:

  • User interaction is required to exploit this vulnerability.
  • In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit these vulnerabilities. In addition, compromised Web sites and Web sites that accept or host user-provided content or advertisements could contain specially crafted content that could exploit these vulnerabilities. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to persuade users to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes users to the attacker's Web site.
  • By default, all supported versions of Microsoft Outlook and Microsoft Outlook Express open HTML e-mail messages in the Restricted sites zone. The Restricted sites zone helps reduce attacks that could try to exploit this vulnerability by preventing Active Scripting and ActiveX controls from being used when reading HTML e-mail. However, if a user clicks on a link within an e-mail they could still be vulnerable to this issue through the Web-based attack scenario.
  • By default, Internet Explorer on Windows Server 2003 runs in a restricted mode that is known as Enhanced Security Configuration. This mode sets the security level for the Internet zone to High. This is a mitigating factor for Web sites that have not been added to Internet Explorer Trusted sites zone. See the FAQ section of this security update for more information about Internet Explorer Enhanced Security Configuration.
  • Windows Internet Explorer 7 for Windows XP Service Pack 2, Windows Internet Explorer 7 for Windows XP Professional x64 Edition, Windows Internet Explorer 7 for Windows Server 2003 Service Pack 1, Windows Internet Explorer 7 for Windows Server 2003 with SP1 for Itanium-based Systems, Windows Internet Explorer 7 for Windows Server 2003 x64 Edition, and Windows Internet Explorer 7 in Windows Vista are not affected by this vulnerability.

Workarounds for TIF Folder Information Disclosure Vulnerability - CVE-2006-5578:

Microsoft has tested the following workarounds. Although these workarounds will not correct the underlying vulnerability, they help block known attack vectors. When a workaround reduces functionality, it is identified in the following section.

  • Disable “Drag and Drop or copy and paste files” in Internet Explorer

    Disable the Drag and drop or copy and paste files option in the Internet and intranet zones. To do this, follow these steps:

    1. In Internet Explorer, click Internet Options on the Tools menu, and then click the Security tab.
    2. In the Select a Web content zone to specify its security settings box, click Internet, and then click Custom Level.
    3. In the Settings box, locate the Drag and drop or copy and paste files option under Miscellaneous. Make a note of your current setting.
    4. Under Drag and drop or copy and paste files, click Disable, and then click OK.
    5. Click Yes, and then click OK two times.

    Note Repeat these steps for the local intranet zone by clicking Local intranet instead of Internet in step 2.

  • Configure Internet Explorer to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone

    You can help protect against this vulnerability by changing your settings to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone. To do this, follow these steps:

    1. In Internet Explorer, click Internet Options on the Tools menu.
    2. Click the Security tab.
    3. Click Internet, and then click Custom Level.
    4. Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.
    5. Click Local intranet, and then click Custom Level.
    6. Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.
    7. Click OK two times to return to Internet Explorer.

    Note Disabling Active Scripting in the Internet and Local intranet security zones may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly.

    Impact of Workaround: There are side effects to prompting before running Active Scripting. Many Web sites that are on the Internet or on an intranet use Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use Active Scripting to provide menus, ordering forms, or even account statements. Prompting before running Active Scripting is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run Active Scripting. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone”.

  • Add sites that you trust to the Internet Explorer Trusted sites zone

    After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

    To do this, follow these steps:

    1. In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.
    2. In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.
    3. If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.
    4. In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.
    5. Repeat these steps for each site that you want to add to the zone.
    6. Click OK two times to accept the changes and return to Internet Explorer.

    Note Add any sites that you trust not to take malicious action on your computer. Two in particular that you may want to add are "*.windowsupdate.microsoft.com" and “*.update.microsoft.com” (without the quotation marks). These are the sites that will host the update, and it requires an ActiveX Control to install the update.

  • Set Internet and Local intranet security zone settings to “High” to prompt before running ActiveX Controls and Active Scripting in these zones

    You can help protect against this vulnerability by changing your settings for the Internet security zone to prompt before running ActiveX controls. You can do this by setting your browser security to High.

    To raise the browsing security level in Microsoft Internet Explorer, follow these steps:

    1. On the Internet Explorer Tools menu, click Internet Options.
    2. In the Internet Options dialog box, click the Security tab, and then click the Internet icon.
    3. Under Security level for this zone, move the slider to High. This sets the security level for all Web sites you visit to High.

    Note If no slider is visible, click Default Level, and then move the slider to High.

    Note Setting the level to High may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly even with the security setting set to High.

    Impact of Workaround: There are side effects to prompting before running ActiveX Controls and Active Scripting. Many Web sites that are on the Internet or on an intranet use ActiveX or Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX Controls to provide menus, ordering forms, or even account statements. Prompting before running ActiveX Controls or Active Scripting is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run ActiveX Controls or Active Scripting. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone”.

  • Add sites that you trust to the Internet Explorer Trusted sites zone

    After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

    To do this, follow these steps:

    1. In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.
    2. In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.
    3. If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.
    4. In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.
    5. Repeat these steps for each site that you want to add to the zone.
    6. Click OK two times to accept the changes and return to Internet Explorer.

    Note Add any sites that you trust not to take malicious action on your computer. Two in particular that you may want to add are "*.windowsupdate.microsoft.com" and “*.update.microsoft.com” (without the quotation marks). These are the sites that will host the update, and it requires an ActiveX Control to install the update.

FAQ for TIF Folder Information Disclosure Vulnerability - CVE-2006-5578:

What is the scope of the vulnerability?
This is an information disclosure vulnerability. An attacker could exploit the vulnerability by constructing a specially crafted Web page that could allow for information disclosure of cached content in the Temporary Internet Files (TIF) folder if a user viewed and interacted with the Web page.

What causes the vulnerability?
The vulnerability is a result of how Internet Explorer handles drag and drop operations in certain situations.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability would be able to retrieve files from the Temporary Internet Files (TIF) folder on a user’s system.

How could an attacker exploit the vulnerability?
An attacker could host a specially crafted Web site that is designed to exploit this vulnerability through Internet Explorer and then persuade a user to view the Web site. This can also include Web sites that accept user-provided content or advertisements, Web sites that host user-provided content or advertisements, and compromised Web sites. These Web sites could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to persuade users to visit the Web site, typically by getting them to click a link in an e-mail message or in an Instant Messenger message that takes users to the attacker's Web site. It could also be possible to display specially crafted Web content by using banner advertisements or by using other methods to deliver Web content to affected systems.

What systems are primarily at risk from the vulnerability?
This vulnerability requires that a user is logged on and visits a Web site for any malicious action to occur. Therefore, any systems where Internet Explorer is used frequently, such as workstations or terminal servers, are at the most risk from this vulnerability.

I am running Internet Explorer on Windows Server 2003. Does this mitigate these vulnerabilities?
Yes. By default, Internet Explorer on Windows Server 2003 runs in a restricted mode that is known as Enhanced Security Configuration. This mode sets the security level for the Internet zone to High. This is a mitigating factor for Web sites that have not been added to Internet Explorer Trusted sites zone.

What is the Internet Explorer Enhanced Security Configuration?
Internet Explorer Enhanced Security Configuration is a group of preconfigured Internet Explorer settings that reduce the likelihood of a user or of an administrator downloading and running specially crafted Web content on a server. Internet Explorer Enhanced Security Configuration reduces this risk by modifying many security-related settings. This includes the settings on the Security tab and the Advanced tab in the Internet Options dialog box. Some of the important modifications include the following:

  • Security level for the Internet zone is set to High. This setting disables scripts, ActiveX controls, Microsoft Java Virtual Machine (MSJVM), and file downloads.
  • Automatic detection of intranet sites is disabled. This setting assigns all intranet Web sites and all Universal Naming Convention (UNC) paths that are not explicitly listed in the Local intranet zone to the Internet zone.
  • Install On Demand and non-Microsoft browser extensions are disabled. This setting prevents Web pages from automatically installing components and prevents non-Microsoft extensions from running.
  • Multimedia content is disabled. This setting prevents music, animations, and video clips from running.

For more information regarding Internet Explorer Enhanced Security Configuration, see the guide, Managing Internet Explorer Enhanced Security Configuration, at the following Web site.

What does the update do?
The update removes the vulnerability by ensuring that a drag and drop operation does not expose the location of the cached content in the TIF folder.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through responsible disclosure. Microsoft had not received any information to indicate that this vulnerability had been publicly disclosed when this security bulletin was originally issued.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers and had not seen any examples of proof of concept code published when this security bulletin was originally issued.

TIF Folder Information Disclosure Vulnerability - CVE-2006-5577:

An information disclosure vulnerability exists in Internet Explorer in certain scenarios where the path to the cached content in the TIF folder could be disclosed. An attacker could exploit the vulnerability by constructing a specially crafted Web page that could allow for information disclosure if a user viewed the Web page. An attacker who successfully exploited this vulnerability would be able to retrieve files from the Temporary Internet Files (TIF) folder on a user’s system. However, user interaction is required to exploit this vulnerability.

Mitigating Factors for TIF Folder Information Disclosure Vulnerability - CSV-2006-5577:

  • In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit these vulnerabilities. In addition, compromised Web sites and Web sites that accept or host user-provided content or advertisements could contain specially crafted content that could exploit these vulnerabilities. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to persuade users to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes users to the attacker's Web site.
  • By default, all supported versions of Microsoft Outlook and Microsoft Outlook Express open HTML e-mail messages in the Restricted sites zone. The Restricted sites zone helps reduce attacks that could try to exploit this vulnerability by preventing Active Scripting and ActiveX controls from being used when reading HTML e-mail. However, if a user clicks on a link within an e-mail they could still be vulnerable to this issue through the Web-based attack scenario.
  • By default, Internet Explorer on Windows Server 2003 runs in a restricted mode that is known as Enhanced Security Configuration. This mode sets the security level for the Internet zone to High. This is a mitigating factor for Web sites that have not been added to Internet Explorer Trusted sites zone. See the FAQ section of this security update for more information about Internet Explorer Enhanced Security Configuration.
  • Windows Internet Explorer 7 for Windows XP Service Pack 2, Windows Internet Explorer 7 for Windows XP Professional x64 Edition, Windows Internet Explorer 7 for Windows Server 2003 Service Pack 1, Windows Internet Explorer 7 for Windows Server 2003 with SP1 for Itanium-based Systems, Windows Internet Explorer 7 for Windows Server 2003 x64 Edition, and Windows Internet Explorer 7 in Windows Vista are not affected by this vulnerability.

Workarounds for TIF Folder Information Disclosure Vulnerability - CVE-2006-5577:

Microsoft has tested the following workarounds. Although these workarounds will not correct the underlying vulnerability, they help block known attack vectors. When a workaround reduces functionality, it is identified in the following section.

  • Configure Internet Explorer to prompt before running ActiveX Controls or disable ActiveX Controls in the Internet and Local intranet security zone

    You can help protect against these vulnerabilities by changing your Internet Explorer settings to prompt before running ActiveX controls. To do this, follow these steps:

    1. In Internet Explorer, click Internet Options on the Tools menu.
    2. Click the Security tab.
    3. Click Internet, and then click Custom Level.
    4. Under Settings, in the ActiveX controls and plug-ins section, under Run ActiveX controls and plug-ins, click Prompt or Disable, and then click OK.
    5. Click Local intranet, and then click Custom Level.
    6. Under Settings, in the ActiveX controls and plug-ins section, under Run ActiveX controls and plug-ins, click Prompt or Disable, and then click OK.
    7. Click OK two times to return to Internet Explorer.

    Impact of Workaround: There are side effects to prompting before running ActiveX controls. Many Web sites that are on the Internet or on an intranet use ActiveX to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX controls to provide menus, ordering forms, or even account statements. Prompting before running ActiveX controls is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run ActiveX controls. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone”.

    Add sites that you trust to the Internet Explorer Trusted sites zone

    After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

    To do this, follow these steps:

    1. In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.
    2. In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.
    3. If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.
    4. In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.
    5. Repeat these steps for each site that you want to add to the zone.
    6. Click OK two times to accept the changes and return to Internet Explorer.

    Note Add any sites that you trust not to take malicious action on your computer. Two in particular that you may want to add are "*.windowsupdate.microsoft.com" and “*.update.microsoft.com” (without the quotation marks). These are the sites that will host the update, and it requires an ActiveX Control to install the update.

  • Set Internet and Local intranet security zone settings to “High” to prompt before running ActiveX Controls and Active Scripting in these zones

    You can help protect against these vulnerabilities by changing your settings for the Internet security zone to prompt before running ActiveX controls. You can do this by setting your browser security to High.

    To raise the browsing security level in Microsoft Internet Explorer, follow these steps:

    1. On the Internet Explorer Tools menu, click Internet Options.
    2. In the Internet Options dialog box, click the Security tab, and then click the Internet icon.
    3. Under Security level for this zone, move the slider to High. This sets the security level for all Web sites you visit to High.

    Note If no slider is visible, click Default Level, and then move the slider to High.

    Note Setting the level to High may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly even with the security setting set to High.

    Impact of Workaround: There are side effects to prompting before running ActiveX controls. Many Web sites that are on the Internet or on an intranet use ActiveX to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX controls to provide menus, ordering forms, or even account statements. Prompting before running ActiveX controls is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run ActiveX controls. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone”.

    Add sites that you trust to the Internet Explorer Trusted sites zone

    After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

    To do this, follow these steps:

    1. In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.
    2. In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.
    3. If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.
    4. In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.
    5. Repeat these steps for each site that you want to add to the zone.
    6. Click OK two times to accept the changes and return to Internet Explorer.

    Note Add any sites that you trust not to take malicious action on your computer. Two in particular that you may want to add are "*.windowsupdate.microsoft.com" and “*.update.microsoft.com” (without the quotation marks). These are the sites that will host the update, and it requires an ActiveX Control to install the update.

FAQ for TIF Folder Information Disclosure Vulnerability - CVE-2006-5577:

What is the scope of the vulnerability?
This is an information disclosure vulnerability. An attacker could exploit the vulnerability by constructing a specially crafted Web page that could allow for information disclosure of cached content in the Temporary Internet Files (TIF) folder if a user viewed the Web page. However, user interaction is required to exploit this vulnerability.

What causes the vulnerability?
In certain scenarios, an OBJECT tag can disclose the path to the cached content in the TIF folder

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability would be able to retrieve files from the Temporary Internet Files (TIF) folder on a user’s system.

How could an attacker exploit the vulnerability?
An attacker could host a specially crafted Web site that is designed to exploit this vulnerability through Internet Explorer and then persuade a user to view the Web site. This can also include Web sites that accept user-provided content or advertisements, Web sites that host user-provided content or advertisements, and compromised Web sites. These Web sites could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to persuade users to visit the Web site, typically by getting them to click a link in an e-mail message or in an Instant Messenger message that takes users to the attacker's Web site. It could also be possible to display specially crafted Web content by using banner advertisements or by using other methods to deliver Web content to affected systems.

What systems are primarily at risk from the vulnerability?
This vulnerability requires that a user is logged on and visits a Web site for any malicious action to occur. Therefore, any systems where Internet Explorer is used frequently, such as workstations or terminal servers, are at the most risk from this vulnerability.

I am running Internet Explorer on Windows Server 2003. Does this mitigate these vulnerabilities?
Yes. By default, Internet Explorer on Windows Server 2003 runs in a restricted mode that is known as Enhanced Security Configuration. This mode sets the security level for the Internet zone to High. This is a mitigating factor for Web sites that have not been added to Internet Explorer Trusted sites zone.

What is the Internet Explorer Enhanced Security Configuration?
Internet Explorer Enhanced Security Configuration is a group of preconfigured Internet Explorer settings that reduce the likelihood of a user or of an administrator downloading and running specially crafted Web content on a server. Internet Explorer Enhanced Security Configuration reduces this risk by modifying many security-related settings. This includes the settings on the Security tab and the Advanced tab in the Internet Options dialog box. Some of the important modifications include the following:

  • Security level for the Internet zone is set to High. This setting disables scripts, ActiveX controls, Microsoft Java Virtual Machine (MSJVM), and file downloads.
  • Automatic detection of intranet sites is disabled. This setting assigns all intranet Web sites and all Universal Naming Convention (UNC) paths that are not explicitly listed in the Local intranet zone to the Internet zone.
  • Install On Demand and non-Microsoft browser extensions are disabled. This setting prevents Web pages from automatically installing components and prevents non-Microsoft extensions from running.
  • Multimedia content is disabled. This setting prevents music, animations, and video clips from running.

For more information regarding Internet Explorer Enhanced Security Configuration, see the guide, Managing Internet Explorer Enhanced Security Configuration, at the following Web site.

What does the update do?
The update removes the vulnerability by ensuring that OBJECT tags do not expose sensitive paths to script.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through responsible disclosure. Microsoft had not received any information to indicate that this vulnerability had been publicly disclosed when this security bulletin was originally issued.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers and had not seen any examples of proof of concept code published when this security bulletin was originally issued.

Security Update Information

Affected Software:

For information about the specific security update for your affected software, click the appropriate link:

Internet Explorer 5.01 Service Pack 4 on Windows 2000 (all versions)

Prerequisites For Windows 2000, this security update requires Service Pack 4 (SP4). For Small Business Server 2000, this security update requires Small Business Server 2000 Service Pack 1a (SP1a) or Small Business Server 2000 running with Windows 2000 Server Service Pack 4 (SP4).

The software that is listed has been tested to determine whether the versions are affected. Other versions either no longer include security update support or may not be affected. To determine the support life cycle for your product and version, visit the Microsoft Support Lifecycle Web site.

For more information about how to obtain the latest service pack, see Microsoft Knowledge Base Article 260910.

Inclusion in Future Service Packs: The update for this issue may be included in a future Update Rollup.

Installation Information

This security update supports the following setup switches.

Supported Security Update Installation Switches
Switch Description
/help Displays the command-line options
Setup Modes
/passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart Does not restart when installation has completed
/forcerestart Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x] Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart Display a dialog box prompting the local user to allow a restart
Special Options
/overwriteoem Overwrites OEM files without prompting
/nobackup Does not back up files needed for uninstall
/forceappsclose Forces other programs to close when the computer shuts down
/log:path Allows the redirection of installation log files
/extract[:path] Extracts files without starting the Setup program
/ER Enables extended error reporting
/verbose Enables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly.

Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841. For more information about the Update.exe installer, visit the Microsoft TechNet Web site. For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

Deployment Information

To install the security update without any user intervention, use the following command at a command prompt for Windows 2000 Service Pack 4:

IE5.01sp4-KB925454-Windows2000sp4-x86-ENU.exe /quiet

Note Use of the /quiet switch will suppress all messages. This includes suppressing failure messages. Administrators should use one of the supported methods to verify the installation was successful when they use the /quiet switch. Administrators should also review the KB925454-IE501SP4-20061116.120000.log file for any failure messages when they use this switch.

To install the security update without forcing the system to restart, use the following command at a command prompt for Windows 2000 Service Pack 4:

IE5.01sp4-KB925454-Windows2000sp4-x86-ENU.exe /norestart

For more information about how to deploy this security update with Software Update Services, visit the Software Update Services Web site. For more information about how to deploy this security update using Windows Server Update Services, visit the Windows Server Update Services Web site. This security update will also be available through the Microsoft Update Web site.

Restart Requirement

You must restart your system after you apply this security update.

Removal Information

To remove this security update, use the Add or Remove Programs tool in Control Panel.

System administrators can also use the Spuninst.exe utility to remove this security update. The Spuninst.exe utility is located in the %Windir%\$NTUninstallKB925454-IE501SP4-20061116.120000$\Spuninst folder.

Supported Spuninst.exe Switches
Switch Description
/help Displays the command-line options
Setup Modes
/passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart Does not restart when installation has completed
/forcerestart Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x] Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart Display a dialog box prompting the local user to allow a restart
Special Options
/forceappsclose Forces other programs to close when the computer shuts down
/log:path Allows the redirection of installation log files

File Information

The English version of this security update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.

Windows 2000 Service Pack 4 and Small Business Server 2000:

File Name Version Date Time Size
Browseui.dll 5.0.3846.2300 23-Oct-2006 18:32 792,848
Danim.dll 6.1.9.729 23-Oct-2006 07:42 1,134,352
Iepeers.dll 5.0.3846.2300 23-Oct-2006 18:38 100,112
Inseng.dll 5.0.3846.2300 23-Oct-2006 18:39 74,000
Jsproxy.dll 5.0.3846.2300 23-Oct-2006 18:38 13,584
Mshtml.dll 5.0.3846.2300 23-Oct-2006 18:38 2,303,248
Msrating.dll 5.0.3846.2300 23-Oct-2006 18:34 149,776
Pngfilt.dll 5.0.3846.2300 23-Oct-2006 18:38 48,912
Shdocvw.dll 5.0.3846.2300 23-Oct-2006 18:31 1,104,656
Shlwapi.dll 5.0.3900.7070 23-Oct-2006 20:03 284,432
Url.dll 5.50.4970.2300 23-Oct-2006 18:28 84,240
Urlmon.dll 5.0.3846.2300 23-Oct-2006 18:39 424,208
Wininet.dll 5.0.3846.2300 23-Oct-2006 18:38 451,344

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

To verify that a security update has been applied to an affected system, you can use the Microsoft Baseline Security Analyzer (MBSA) tool. MBSA allows administrators to scan local and remote systems for missing security updates and for common security misconfigurations. For more information about MBSA, visit the Microsoft Baseline Security Analyzer Web site.

  • File Version Verification

Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

  1. Click Start, and then click Search.
  2. In the Search Results pane, click All files and folders under Search Companion.
  3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
  4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties. Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
  5. On the Version tab, determine the version of the file that is installed on your computer by comparing it to the version that is documented in the appropriate file information table. Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
  • Registry Key Verification

You may also be able to verify the files that this security update has installed by reviewing the following registry key:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Internet Explorer 5.01\SP4\KB925454-IE501SP4-20061116.120000\Filelist

Note This registry key may not contain a complete list of installed files. Also, this registry key may not be created correctly when an administrator or an OEM integrates or slipstreams the 925454 security update into the Windows installation source files.

Internet Explorer 6 Service Pack 1 for Windows 2000 (all versions)

Prerequisites To install the Internet Explorer 6 Service Pack 1 (SP1) version of this update, you must be running Internet Explorer 6 SP1 (version 6.00.2800.1106) on one of the following versions of Windows:

  • Microsoft Windows 2000 Service Pack 4
  • Microsoft Small Business Server 2000 Service Pack 1a (SP1a) or Small Business Server 2000 running with Windows 2000 Server Service Pack 4 (SP4).

The software that is listed has been tested to determine whether the versions are affected. Other versions either no longer include security update support or may not be affected. To determine the support life cycle for your product and version, visit the Microsoft Support Lifecycle Web site.

For more information about how to obtain the latest service pack, see Microsoft Knowledge Base Article 260910.

Inclusion in Future Service Packs: The update for this issue may be included in a future Update Rollup.

Installation Information

This security update supports the following setup switches.

Supported Security Update Installation Switches
Switch Description
/help Displays the command-line options
Setup Modes
/passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart Does not restart when installation has completed
/forcerestart Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x] Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart Display a dialog box prompting the local user to allow a restart
Special Options
/overwriteoem Overwrites OEM files without prompting
/nobackup Does not back up files needed for uninstall
/forceappsclose Forces other programs to close when the computer shuts down
/log:path Allows the redirection of installation log files
/extract[:path] Extracts files without starting the Setup program
/ER Enables extended error reporting
/verbose Enables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly.

Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841. For more information about the Update.exe installer, visit the Microsoft TechNet Web site. For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

Deployment Information

To install the security update without any user intervention, use the following command at a command prompt for Windows 2000 Service Pack 4:

IE6.0sp1-KB925454-Windows-2000-x86-enu /quiet

Note Use of the /quiet switch will suppress all messages. This includes suppressing failure messages. Administrators should use one of the supported methods to verify the installation was successful when they use the /quiet switch. Administrators should also review the KB925454-IE6SP1-20061116.120000.log file for any failure messages when they use this switch.

To install the security update without forcing the system to restart, use the following command at a command prompt for Windows 2000 Service Pack 4:

IE6.0sp1-KB925454-Windows-2000-x86-enu /norestart

For more information about how to deploy this security update with Software Update Services, visit the Software Update Services Web site. For more information about how to deploy this security update using Windows Server Update Services, visit the Windows Server Update Services Web site. This security update will also be available through the Microsoft Update Web site.

Restart Requirement

You must restart your system after you apply this security update.

Removal Information

To remove this security update, use the Add or Remove Programs tool in Control Panel.

System administrators can also use the Spuninst.exe utility to remove this security update. The Spuninst.exe utility is located in the %Windir%\$NTUninstallKB925454-IE6SP1-20061116.120000$\Spuninst folder.

Supported Spuninst.exe Switches
Switch Description
/help Displays the command-line options
Setup Modes
/passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart Does not restart when installation has completed
/forcerestart Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x] Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart Display a dialog box prompting the local user to allow a restart
Special Options
/forceappsclose Forces other programs to close when the computer shuts down
/log:path Allows the redirection of installation log files

File Information

The English version of this security update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.

Windows 2000 Service Pack 4 and Small Business Server 2000:

File Name Version Date Time Size Folder
Browseui.dll 6.0.2800.1896 23-Oct-2006 17:20 1,017,856 RTMGDR
Cdfview.dll 6.0.2800.1896 23-Oct-2006 17:21 143,360 RTMGDR
Danim.dll 6.3.1.148 24-Oct-2006 18:22 986,112 RTMGDR
Dxtmsft.dll 6.3.2800.1586 23-Oct-2006 17:24 351,744 RTMGDR
Dxtrans.dll 6.3.2800.1586 23-Oct-2006 17:24 192,512 RTMGDR
Iepeers.dll 6.0.2800.1586 23-Oct-2006 17:24 236,032 RTMGDR
Inseng.dll 6.0.2800.1586 23-Oct-2006 17:24 69,632 RTMGDR
Jsproxy.dll 6.0.2800.1586 23-Oct-2006 17:25 12,288 RTMGDR
Mshtml.dll 6.0.2800.1586 23-Oct-2006 17:24 2,704,896 RTMGDR
Msrating.dll 6.0.2800.1896 23-Oct-2006 17:21 132,096 RTMGDR
Mstime.dll 6.0.2800.1586 23-Oct-2006 17:23 498,176 RTMGDR
Pngfilt.dll 6.0.2800.1586 23-Oct-2006 17:24 34,816 RTMGDR
Shdocvw.dll 6.0.2800.1896 23-Oct-2006 17:20 1,340,416 RTMGDR
Shlwapi.dll 6.0.2800.1896 23-Oct-2006 17:20 402,944 RTMGDR
Urlmon.dll 6.0.2800.1586 23-Oct-2006 17:25 461,824 RTMGDR
Wininet.dll 6.0.2800.1586 23-Oct-2006 17:25 575,488 RTMGDR
Browseui.dll 6.0.2800.1896 23-Oct-2006 17:20 1,017,856 RTMQFE
Cdfview.dll 6.0.2800.1896 23-Oct-2006 17:21 143,360 RTMQFE
Danim.dll 6.3.1.148 24-Oct-2006 18:22 986,112 RTMQFE
Dxtmsft.dll 6.3.2800.1587 23-Oct-2006 17:21 351,744 RTMQFE
Dxtrans.dll 6.3.2800.1587 23-Oct-2006 17:21 192,512 RTMQFE
Iepeers.dll 6.0.2800.1587 23-Oct-2006 17:22 236,544 RTMQFE
Inseng.dll 6.0.2800.1587 23-Oct-2006 17:22 69,632 RTMQFE
Jsproxy.dll 6.0.2800.1587 23-Oct-2006 17:23 12,288 RTMQFE
Mshtml.dll 6.0.2800.1587 23-Oct-2006 17:21 2,711,552 RTMQFE
Msrating.dll 6.0.2800.1896 23-Oct-2006 17:21 132,096 RTMQFE
Mstime.dll 6.0.2800.1587 23-Oct-2006 17:21 498,176 RTMQFE
Pngfilt.dll 6.0.2800.1587 23-Oct-2006 17:22 38,912 RTMQFE
Shdocvw.dll 6.0.2800.1896 23-Oct-2006 17:20 1,340,416 RTMQFE
Shlwapi.dll 6.0.2800.1896 23-Oct-2006 17:20 402,944 RTMQFE
Urlmon.dll 6.0.2800.1587 23-Oct-2006 17:23 463,872 RTMQFE
Wininet.dll 6.0.2800.1587 23-Oct-2006 17:23 587,776 RTMQFE

Notes When you install these security updates, the installer checks to see if one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix. If you have previously installed a hotfix to update one of these files, the installer copies the RTMQFE, SP1QFE, or SP2QFE files to your system. Otherwise, the installer copies the RTMGDR, SP1GDR, or SP2GDR files to your system. Security updates may not contain all variations of these files. For more information about this behavior, see Microsoft Knowledge Base Article 824994.

For more information about the Update.exe installer, visit the Microsoft TechNet Web site.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

To verify that a security update has been applied to an affected system, you can use the Microsoft Baseline Security Analyzer (MBSA) tool. MBSA allows administrators to scan local and remote systems for missing security updates and for common security misconfigurations. For more information about MBSA, visit the Microsoft Baseline Security Analyzer Web site.

  • File Version Verification

Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

  1. Click Start, and then click Search.
  2. In the Search Results pane, click All files and folders under Search Companion.
  3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
  4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties. Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
  5. On the Version tab, determine the version of the file that is installed on your computer by comparing it to the version that is documented in the appropriate file information table. Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
  • Registry Key Verification

You may also be able to verify the files that this security update has installed by reviewing the following registry key:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Internet Explorer 6\SP1\KB925454-IE6SP1-20061116.120000\Filelist

Note This registry key may not contain a complete list of installed files. Also, this registry key may not be created correctly when an administrator or an OEM integrates or slipstreams the 925454 security update into the Windows installation source files.

Windows XP Service Pack 2 (all versions) and Windows XP Professional x64 Edition

This security update requires Microsoft Windows XP Service Pack 2. For more information, see Microsoft Knowledge Base Article 322389.

Note For Windows XP Professional x64 Edition, this security update is the same as the Windows Server 2003 x64 Edition security update.

Inclusion in Future Service Packs: The update for this issue will be included in a future Service Pack or Update Rollup.

Installation Information

This security update supports the following setup switches.

Supported Security Update Installation Switches
Switch Description
/help Displays the command-line options
Setup Modes
/passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart Does not restart when installation has completed
/forcerestart Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x] Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart Display a dialog box prompting the local user to allow a restart
Special Options
/overwriteoem Overwrites OEM files without prompting
/nobackup Does not back up files needed for uninstall
/forceappsclose Forces other programs to close when the computer shuts down
/log:path Allows the redirection of installation log files
/integrate:path Integrates the update into the Windows source files. These files are located at the path that is specified in the switch.
/extract[:path] Extracts files without starting the Setup program
/ER Enables extended error reporting
/verbose Enables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly.

Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841. For more information about the Update.exe installer, visit the Microsoft TechNet Web site.

Deployment Information

To install the security update without any user intervention, use the following command at a command prompt for Microsoft Windows XP:

Windowsxp-kb925454-x86-enu /quiet

Note Use of the /quiet switch will suppress all messages. This includes suppressing failure messages. Administrators should use one of the supported methods to verify the installation was successful when they use the /quiet switch. Administrators should also review the KB925454.log file for any failure messages when they use this switch.

To install the security update without forcing the system to restart, use the following command at a command prompt for Windows XP:

Windowsxp-kb925454-x86-enu /norestart

For information about how to deploy this security update by using Software Update Services, visit the Software Update Services Web site. For more information about how to deploy this security update using Windows Server Update Services, visit the Windows Server Update Services Web site. This security update will also be available through the Microsoft Update Web site.

Restart Requirement

You must restart your system after you apply this security update.

Removal Information

To remove this security update, use the Add or Remove Programs tool in Control Panel.

System administrators can also use the Spuninst.exe utility to remove this security update. The Spuninst.exe utility is located in the %Windir%\$NTUninstallKB925454$\Spuninst folder.

Supported Spuninst.exe Switches
Switch Description
/help Displays the command-line options
Setup Modes
/passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart Does not restart when installation has completed
/forcerestart Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x] Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart Display a dialog box prompting the local user to allow a restart
Special Options
/forceappsclose Forces other programs to close when the computer shuts down
/log:path Allows the redirection of installation log files

File Information

The English version of this security update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.

Windows XP Home Edition Service Pack 2, Windows XP Professional Service Pack 2, Windows XP Tablet PC Edition 2005, and Windows XP Media Center Edition 2005:

File Name Version Date Time Size Folder
Browseui.dll 6.0.2900.3020 23-Oct-2006 15:17 1,022,976 SP2GDR
Cdfview.dll 6.0.2900.3020 23-Oct-2006 15:17 151,040 SP2GDR
Danim.dll 6.3.1.148 23-Oct-2006 15:17 1,054,208 SP2GDR
Dxtmsft.dll 6.3.2900.3020 23-Oct-2006 15:17 357,888 SP2GDR
Dxtrans.dll 6.3.2900.3020 23-Oct-2006 15:17 205,312 SP2GDR
Extmgr.dll 6.0.2900.3020 23-Oct-2006 15:17 55,808 SP2GDR
Iedw.exe 5.1.2600.3020 23-Oct-2006 11:00 18,432 SP2GDR
Iepeers.dll 6.0.2900.3020 23-Oct-2006 15:17 251,392 SP2GDR
Inseng.dll 6.0.2900.3020 23-Oct-2006 15:17 96,256 SP2GDR
Jsproxy.dll 6.0.2900.3020 23-Oct-2006 15:17 16,384 SP2GDR
Mshtml.dll 6.0.2900.3020 23-Oct-2006 15:17 3,055,104 SP2GDR
Mshtmled.dll 6.0.2900.3020 23-Oct-2006 15:17 448,512 SP2GDR
Msrating.dll 6.0.2900.3020 23-Oct-2006 15:17 146,432 SP2GDR
Mstime.dll 6.0.2900.3020 23-Oct-2006 15:17 532,480 SP2GDR
Pngfilt.dll 6.0.2900.3020 23-Oct-2006 15:17 39,424 SP2GDR
Shdocvw.dll 6.0.2900.3020 23-Oct-2006 15:17 1,494,528 SP2GDR
Shlwapi.dll 6.0.2900.3020 23-Oct-2006 15:17 474,112 SP2GDR
Urlmon.dll 6.0.2900.3020 23-Oct-2006 15:17 613,888 SP2GDR
Wininet.dll 6.0.2900.3020 23-Oct-2006 15:17 658,944 SP2GDR
Xpsp3res.dll 5.1.2600.3020 23-Oct-2006 10:47 115,200 SP2GDR
Browseui.dll 6.0.2900.3020 23-Oct-2006 15:34 1,022,976 SP2QFE
Cdfview.dll 6.0.2900.3020 23-Oct-2006 15:34 151,040 SP2QFE
Danim.dll 6.3.1.148 23-Oct-2006 15:34 1,054,208 SP2QFE
Dxtmsft.dll 6.3.2900.3020 23-Oct-2006 15:34 357,888 SP2QFE
Dxtrans.dll 6.3.2900.3020 23-Oct-2006 15:34 205,312 SP2QFE
Extmgr.dll 6.0.2900.3020 23-Oct-2006 15:34 55,808 SP2QFE
Iedw.exe 5.1.2600.3020 23-Oct-2006 11:02 18,432 SP2QFE
Iepeers.dll 6.0.2900.3020 23-Oct-2006 15:34 251,904 SP2QFE
Inseng.dll 6.0.2900.3020 23-Oct-2006 15:34 96,256 SP2QFE
Jsproxy.dll 6.0.2900.3020 23-Oct-2006 15:34 15,872 SP2QFE
Mshtml.dll 6.0.2900.3020 23-Oct-2006 15:34 3,061,248 SP2QFE
Mshtmled.dll 6.0.2900.3020 23-Oct-2006 15:34 448,512 SP2QFE
Msrating.dll 6.0.2900.3020 23-Oct-2006 15:34 146,432 SP2QFE
Mstime.dll 6.0.2900.3020 23-Oct-2006 15:34 532,480 SP2QFE
Pngfilt.dll 6.0.2900.3020 23-Oct-2006 15:34 39,424 SP2QFE
Shdocvw.dll 6.0.2900.3020 23-Oct-2006 15:34 1,497,600 SP2QFE
Shlwapi.dll 6.0.2900.3020 23-Oct-2006 15:34 474,112 SP2QFE
Urlmon.dll 6.0.2900.3020 23-Oct-2006 15:34 615,936 SP2QFE
Wininet.dll 6.0.2900.3020 23-Oct-2006 15:34 664,576 SP2QFE
Xpsp3res.dll 5.1.2600.3020 23-Oct-2006 11:01 248,320 SP2QFE

Windows XP Professional x64:

File Name Version Date Time Size CPU Folder
Browseui.dll 6.0.3790.2817 18-Nov-2006 09:22 1,604,608 x64 SP1GDR
Danim.dll 6.3.1.148 18-Nov-2006 09:22 1,989,120 x64 SP1GDR
Dxtmsft.dll 6.3.3790.2817 18-Nov-2006 09:22 561,664 x64 SP1GDR
Dxtrans.dll 6.3.3790.2817 18-Nov-2006 09:22 332,288 x64 SP1GDR
Iepeers.dll 6.0.3790.2817 18-Nov-2006 09:22 369,664 x64 SP1GDR
Jsproxy.dll 6.0.3790.2817 18-Nov-2006 09:22 24,064 x64 SP1GDR
Mshtml.dll 6.0.3790.2817 18-Nov-2006 09:22 5,995,520 x64 SP1GDR
Mstime.dll 6.0.3790.2817 18-Nov-2006 09:22 900,608 x64 SP1GDR
Pngfilt.dll 5.2.3790.2817 18-Nov-2006 09:22 64,000 x64 SP1GDR
Shdocvw.dll 6.0.3790.2817 18-Nov-2006 09:22 2,437,632 x64 SP1GDR
Shlwapi.dll 6.0.3790.2817 18-Nov-2006 09:22 621,568 x64 SP1GDR
Urlmon.dll 6.0.3790.2817 18-Nov-2006 09:22 1,083,904 x64 SP1GDR
W03a2409.dll 5.2.3790.2817 18-Nov-2006 09:22 4,608 x64 SP1GDR
Wininet.dll 6.0.3790.2817 18-Nov-2006 09:23 1,187,840 x64 SP1GDR
Wbrowseui.dll 6.0.3790.2817 18-Nov-2006 09:23 1,036,800 x86 SP1GDR\WOW
Wdanim.dll 6.3.1.148 18-Nov-2006 09:23 1,058,304 x86 SP1GDR\WOW
Wdxtmsft.dll 6.3.3790.2817 18-Nov-2006 09:23 363,008 x86 SP1GDR\WOW
Wdxtrans.dll 6.3.3790.2817 18-Nov-2006 09:23 212,480 x86 SP1GDR\WOW
Wiedw.exe 5.2.3790.2817 18-Nov-2006 09:23 17,920 x86 SP1GDR\WOW
Wiepeers.dll 6.0.3790.2817 18-Nov-2006 09:23 253,952 x86 SP1GDR\WOW
Wjsproxy.dll 6.0.3790.2817 18-Nov-2006 09:23 16,384 x86 SP1GDR\WOW
Wmshtml.dll 6.0.3790.2817 18-Nov-2006 09:23 3,153,920 x86 SP1GDR\WOW
Wmstime.dll 6.0.3790.2817 18-Nov-2006 09:23 537,088 x86 SP1GDR\WOW
Wpngfilt.dll 5.2.3790.2817 18-Nov-2006 09:23 42,496 x86 SP1GDR\WOW
Wshdocvw.dll 6.0.3790.2817 18-Nov-2006 09:23 1,514,496 x86 SP1GDR\WOW
Wshlwapi.dll 6.0.3790.2817 18-Nov-2006 09:23 321,536 x86 SP1GDR\WOW
Wurlmon.dll 6.0.3790.2817 18-Nov-2006 09:23 696,320 x86 SP1GDR\WOW
Ww03a2409.dll 5.2.3790.2817 18-Nov-2006 09:23 4,096 x86 SP1GDR\WOW
Wwininet.dll 6.0.3790.2817 18-Nov-2006 09:23 662,528 x86 SP1GDR\WOW
Browseui.dll 6.0.3790.2817 18-Nov-2006 09:13 1,604,608 x64 SP1QFE
Danim.dll 6.3.1.148 18-Nov-2006 09:13 1,989,120 x64 SP1QFE
Dxtmsft.dll 6.3.3790.2817 18-Nov-2006 09:13 561,664 x64 SP1QFE
Dxtrans.dll 6.3.3790.2817 18-Nov-2006 09:13 332,288 x64 SP1QFE
Iepeers.dll 6.0.3790.2817 18-Nov-2006 09:13 370,176 x64 SP1QFE
Jsproxy.dll 6.0.3790.2817 18-Nov-2006 09:13 24,064 x64 SP1QFE
Mshtml.dll 6.0.3790.2817 18-Nov-2006 09:13 5,998,592 x64 SP1QFE
Mstime.dll 6.0.3790.2817 18-Nov-2006 09:13 900,608 x64 SP1QFE
Pngfilt.dll 5.2.3790.2817 18-Nov-2006 09:13 64,000 x64 SP1QFE
Shdocvw.dll 6.0.3790.2817 18-Nov-2006 09:13 2,438,656 x64 SP1QFE
Shlwapi.dll 6.0.3790.2817 18-Nov-2006 09:14 621,568 x64 SP1QFE
Urlmon.dll 6.0.3790.2817 18-Nov-2006 09:14 1,083,904 x64 SP1QFE
W03a2409.dll 5.2.3790.2817 18-Nov-2006 09:14 27,648 x64 SP1QFE
Wininet.dll 6.0.3790.2817 18-Nov-2006 09:14 1,189,888 x64 SP1QFE
Wbrowseui.dll 6.0.3790.2817 18-Nov-2006 09:14 1,036,800 x86 SP1QFE\WOW
Wdanim.dll 6.3.1.148 18-Nov-2006 09:14 1,058,304 x86 SP1QFE\WOW
Wdxtmsft.dll 6.3.3790.2817 18-Nov-2006 09:14 363,008 x86 SP1QFE\WOW
Wdxtrans.dll 6.3.3790.2817 18-Nov-2006 09:14 212,480 x86 SP1QFE\WOW
Wiedw.exe 5.2.3790.2817 18-Nov-2006 09:14 17,920 x86 SP1QFE\WOW
Wiepeers.dll 6.0.3790.2817 18-Nov-2006 09:14 253,952 x86 SP1QFE\WOW
Wjsproxy.dll 6.0.3790.2817 18-Nov-2006 09:14 16,384 x86 SP1QFE\WOW
Wmshtml.dll 6.0.3790.2817 18-Nov-2006 09:14 3,156,992 x86 SP1QFE\WOW
Wmstime.dll 6.0.3790.2817 18-Nov-2006 09:14 537,088 x86 SP1QFE\WOW
Wpngfilt.dll 5.2.3790.2817 18-Nov-2006 09:14 42,496 x86 SP1QFE\WOW
Wshdocvw.dll 6.0.3790.2817 18-Nov-2006 09:14 1,515,520 x86 SP1QFE\WOW
Wshlwapi.dll 6.0.3790.2817 18-Nov-2006 09:14 321,536 x86 SP1QFE\WOW
Wurlmon.dll 6.0.3790.2817 18-Nov-2006 09:14 696,832 x86 SP1QFE\WOW
Ww03a2409.dll 5.2.3790.2817 18-Nov-2006 09:14 27,136 x86 SP1QFE\WOW
Wwininet.dll 6.0.3790.2817 18-Nov-2006 09:14 665,600 x86 SP1QFE\WOW

Notes When you install these security updates, the installer checks to see if one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.

If you have previously installed a hotfix to update one of these files, the installer copies the RTMQFE, SP1QFE, or SP2QFE files to your system. Otherwise, the installer copies the RTMGDR, SP1GDR, or SP2GDR files to your system. Security updates may not contain all variations of these files. For more information about this behavior, see Microsoft Knowledge Base Article 824994.

For more information about the Update.exe installer, visit the Microsoft TechNet Web site.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

To verify that a security update has been applied to an affected system, you can use the Microsoft Baseline Security Analyzer (MBSA) tool. MBSA allows administrators to scan local and remote systems for missing security updates and for common security misconfigurations. For more information about MBSA, visit the Microsoft Baseline Security Analyzer Web site.

  • File Version Verification

Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

  1. Click Start, and then click Search.
  2. In the Search Results pane, click All files and folders under Search Companion.
  3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
  4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties. Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
  5. On the Version tab, determine the version of the file that is installed on your computer by comparing it to the version that is documented in the appropriate file information table. Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
  • Registry Key Verification

You may also be able to verify the files that this security update has installed by reviewing the following registry keys.

Windows XP Home Edition Service Pack 2, Windows XP Professional Service Pack 2, Windows XP Tablet PC Edition 2005, and Windows XP Media Center Edition 2005:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows XP\SP3\KB925454\Filelist

Windows XP Professional x64 Edition:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows XP Version 2003\SP2\KB925454\Filelist

Note These registry keys may not contain a complete list of installed files. Also, these registry keys may not be created correctly if an administrator or an OEM integrates or slipstreams the 925454 security update into the Windows installation source files.

Windows Server 2003 (all versions)

Prerequisites This security update requires Windows Server 2003 or Windows Server 2003 Service Pack 1.

Note The security updates for Microsoft Windows Server 2003, Microsoft Windows Server 2003 Service Pack 1, and Microsoft Windows Server 2003 x64 Edition also apply to Microsoft Windows Server 2003 R2.

Inclusion in Future Service Packs: The update for this issue will be included in a future Service Pack or Update Rollup.

Installation Information

This security update supports the following setup switches.

Supported Security Update Installation Switches
Switch Description
/help Displays the command-line options
Setup Modes
/passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart Does not restart when installation has completed
/forcerestart Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x] Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart Display a dialog box prompting the local user to allow a restart
Special Options
/overwriteoem Overwrites OEM files without prompting
/nobackup Does not back up files needed for uninstall
/forceappsclose Forces other programs to close when the computer shuts down
/log:path Allows the redirection of installation log files
/integrate:path Integrates the update into the Windows source files. These files are located at the path that is specified in the switch.
/extract[:path] Extracts files without starting the Setup program
/ER Enables extended error reporting
/verbose Enables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly.

Note You can combine these switches into one command. For backward compatibility, the security update also supports many of the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841. For more information about the Update.exe installer, visit the Microsoft TechNet Web site.

Deployment Information

To install the security update without any user intervention, use the following command at a command prompt for Windows Server 2003:

Windowsserver2003-kb925454-x86-enu /quiet

Note Use of the /quiet switch will suppress all messages. This includes suppressing failure messages. Administrators should use one of the supported methods to verify the installation was successful when they use the /quiet switch. Administrators should also review the KB925454.log file for any failure messages when they use this switch.

To install the security update without forcing the system to restart, use the following command at a command prompt for Windows Server 2003:

Windowsserver2003-kb925454-x86-enu /norestart

For information about how to deploy this security update by using Software Update Services, visit the Software Update Services Web site. For more information about how to deploy this security update using Windows Server Update Services, visit the Windows Server Update Services Web site. This security update will also be available through the Microsoft Update Web site.

Restart Requirement

You must restart your system after you apply this security update.

This security update does not support HotPatching. For more information about HotPatching see Microsoft Knowledge Base Article 897341.

Removal Information

To remove this update, use the Add or Remove Programs tool in Control Panel.

System administrators can also use the Spuninst.exe utility to remove this security update. The Spuninst.exe utility is located in the %Windir%\$NTUninstallKB925454$\Spuninst folder.

Supported Spuninst.exe Switches
Switch Description
/help Displays the command-line options
Setup Modes
/passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart Does not restart when installation has completed
/forcerestart Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x] Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart Display a dialog box prompting the local user to allow a restart
Special Options
/forceappsclose Forces other programs to close when the computer shuts down
/log:path Allows the redirection of installation log files

File Information

The English version of this security update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.

Windows Server 2003, Web Edition; Windows Server 2003, Standard Edition; Windows Server 2003, Datacenter Edition; Windows Server 2003, Enterprise Edition; Windows Small Business Server 2003; Windows Server 2003, Web Edition with SP1; Windows Server 2003, Standard Edition with SP1; Windows Server 2003, Enterprise Edition with SP1; Windows Server 2003, Datacenter Edition with SP1; Windows Server 2003 R2, Web Edition; Windows Server 2003 R2, Standard Edition; Windows Server 2003 R2, Datacenter Edition; Windows Server 2003 R2, Enterprise Edition; Windows Small Business Server 2003 R2:

File Name Version Date Time Size Folder
Browseui.dll 6.0.3790.605 23-Oct-2006 16:10 1,057,280 RTMGDR
Cdfview.dll 6.0.3790.605 23-Oct-2006 16:10 147,968 RTMGDR
Danim.dll 6.3.1.148 23-Oct-2006 16:10 993,280 RTMGDR
Digest.dll 6.0.3790.605 23-Oct-2006 16:10 59,904 RTMGDR
Dxtmsft.dll 6.3.3790.605 23-Oct-2006 16:10 351,744 RTMGDR
Dxtrans.dll 6.3.3790.605 23-Oct-2006 16:10 205,312 RTMGDR
Iepeers.dll 6.0.3790.605 23-Oct-2006 16:10 238,592 RTMGDR
Inseng.dll 6.0.3790.605 23-Oct-2006 16:10 73,216 RTMGDR
Jsproxy.dll 6.0.3790.605 23-Oct-2006 16:10 14,848 RTMGDR
Mshtml.dll 6.0.3790.605 23-Oct-2006 16:10 2,937,344 RTMGDR
Mshtmled.dll 6.0.3790.605 23-Oct-2006 16:10 454,144 RTMGDR
Msrating.dll 6.0.3790.605 23-Oct-2006 16:10 135,680 RTMGDR
Mstime.dll 6.0.3790.605 23-Oct-2006 16:10 504,832 RTMGDR
Pngfilt.dll 5.2.3790.605 23-Oct-2006 16:10 40,448 RTMGDR
Shdocvw.dll 6.0.3790.605 23-Oct-2006 16:10 1,398,272 RTMGDR
Shlwapi.dll 6.0.3790.605 23-Oct-2006 16:10 287,744 RTMGDR
Urlmon.dll 6.0.3790.605 23-Oct-2006 16:10 528,384 RTMGDR
Wininet.dll 6.0.3790.605 23-Oct-2006 16:10 626,688 RTMGDR
Browseui.dll 6.0.3790.605 23-Oct-2006 16:04 1,057,280 RTMQFE
Cdfview.dll 6.0.3790.605 23-Oct-2006 16:04 147,968 RTMQFE
Danim.dll 6.3.1.148 23-Oct-2006 16:04 993,280 RTMQFE
Digest.dll 6.0.3790.605 23-Oct-2006 16:04 59,904 RTMQFE
Dxtmsft.dll 6.3.3790.605 23-Oct-2006 16:04 352,256 RTMQFE
Dxtrans.dll 6.3.3790.605 23-Oct-2006 16:04 205,312 RTMQFE
Iepeers.dll 6.0.3790.605 23-Oct-2006 16:04 239,104 RTMQFE
Inseng.dll 6.0.3790.605 23-Oct-2006 16:04 73,216 RTMQFE
Jsproxy.dll 6.0.3790.605 23-Oct-2006 16:04 14,848 RTMQFE
Mshtml.dll 6.0.3790.605 23-Oct-2006 16:04 2,939,904 RTMQFE
Mshtmled.dll 6.0.3790.605 23-Oct-2006 16:04 454,144 RTMQFE
Msrating.dll 6.0.3790.605 23-Oct-2006 16:04 135,680 RTMQFE
Mstime.dll 6.0.3790.605 23-Oct-2006 16:04 504,832 RTMQFE
Pngfilt.dll 5.2.3790.605 23-Oct-2006 16:04 40,448 RTMQFE
Shdocvw.dll 6.0.3790.605 23-Oct-2006 16:04 1,399,808 RTMQFE
Shlwapi.dll 6.0.3790.605 23-Oct-2006 16:04 287,744 RTMQFE
Urlmon.dll 6.0.3790.605 23-Oct-2006 16:04 528,384 RTMQFE
Wininet.dll 6.0.3790.605 23-Oct-2006 16:04 631,296 RTMQFE
Browseui.dll 6.0.3790.2817 23-Oct-2006 16:41 1,036,800 SP1GDR
Danim.dll 6.3.1.148 23-Oct-2006 16:41 1,058,304 SP1GDR
Dxtmsft.dll 6.3.3790.2817 23-Oct-2006 16:41 363,008 SP1GDR
Dxtrans.dll 6.3.3790.2817 23-Oct-2006 16:41 212,480 SP1GDR
Iedw.exe 5.2.3790.2817 23-Oct-2006 12:10 17,920 SP1GDR
Iepeers.dll 6.0.3790.2817 23-Oct-2006 16:41 253,952 SP1GDR
Jsproxy.dll 6.0.3790.2817 23-Oct-2006 16:41 16,384 SP1GDR
Mshtml.dll 6.0.3790.2817 23-Oct-2006 16:41 3,153,920 SP1GDR
Mstime.dll 6.0.3790.2817 23-Oct-2006 16:41 537,088 SP1GDR
Pngfilt.dll 5.2.3790.2817 23-Oct-2006 16:41 42,496 SP1GDR
Shdocvw.dll 6.0.3790.2817 01-Nov-2006 11:07 1,514,496 SP1GDR
Shlwapi.dll 6.0.3790.2817 23-Oct-2006 16:41 321,536 SP1GDR
Urlmon.dll 6.0.3790.2817 23-Oct-2006 16:41 696,320 SP1GDR
W03a2409.dll 5.2.3790.2817 23-Oct-2006 11:54 4,096 SP1GDR
Wininet.dll 6.0.3790.2817 23-Oct-2006 16:41 662,528 SP1GDR
Browseui.dll 6.0.3790.2817 23-Oct-2006 16:50 1,036,800 SP1QFE
Danim.dll 6.3.1.148 23-Oct-2006 16:50 1,058,304 SP1QFE
Dxtmsft.dll 6.3.3790.2817 23-Oct-2006 16:50 363,008 SP1QFE
Dxtrans.dll 6.3.3790.2817 23-Oct-2006 16:50 212,480 SP1QFE
Iedw.exe 5.2.3790.2817 23-Oct-2006 13:16 17,920 SP1QFE
Iepeers.dll 6.0.3790.2817 23-Oct-2006 16:50 253,952 SP1QFE
Jsproxy.dll 6.0.3790.2817 23-Oct-2006 16:50 16,384 SP1QFE
Mshtml.dll 6.0.3790.2817 23-Oct-2006 16:50 3,156,992 SP1QFE
Mstime.dll 6.0.3790.2817 23-Oct-2006 16:50 537,088 SP1QFE
Pngfilt.dll 5.2.3790.2817 23-Oct-2006 16:50 42,496 SP1QFE
Shdocvw.dll 6.0.3790.2817 23-Oct-2006 16:50 1,515,520 SP1QFE
Shlwapi.dll 6.0.3790.2817 23-Oct-2006 16:50 321,536 SP1QFE
Urlmon.dll 6.0.3790.2817 23-Oct-2006 16:50 696,832 SP1QFE
W03a2409.dll 5.2.3790.2817 23-Oct-2006 12:57 27,136 SP1QFE
Wininet.dll 6.0.3790.2817 23-Oct-2006 16:50 665,600 SP1QFE

Windows Server, 2003 Enterprise Edition for Itanium-based Systems; Windows Server 2003, Datacenter Edition for Itanium-based Systems; Windows Server 2003, Enterprise Edition with SP1 for Itanium-based Systems; and Windows Server 2003, Datacenter Edition with SP1 for Itanium-based Systems:

File Name Version Date Time Size CPU Folder
Browseui.dll 6.0.3790.605 18-Nov-2006 09:20 2,536,960 IA-64 RTMGDR
Cdfview.dll 6.0.3790.605 18-Nov-2006 09:20 303,616 IA-64 RTMGDR
Digest.dll 6.0.3790.605 18-Nov-2006 09:20 141,312 IA-64 RTMGDR
Dxtmsft.dll 6.3.3790.605 18-Nov-2006 09:20 940,032 IA-64 RTMGDR
Dxtrans.dll 6.3.3790.605 18-Nov-2006 09:20 585,728 IA-64 RTMGDR
Iepeers.dll 6.0.3790.605 18-Nov-2006 09:20 675,840 IA-64 RTMGDR
Inseng.dll 6.0.3790.605 18-Nov-2006 09:20 217,600 IA-64 RTMGDR
Jsproxy.dll 6.0.3790.605 18-Nov-2006 09:20 36,864 IA-64 RTMGDR
Mshtml.dll 6.0.3790.605 18-Nov-2006 09:20 8,250,880 IA-64 RTMGDR
Mshtmled.dll 6.0.3790.605 18-Nov-2006 09:21 1,409,536 IA-64 RTMGDR
Msrating.dll 6.0.3790.605 18-Nov-2006 09:21 387,584 IA-64 RTMGDR
Mstime.dll 6.0.3790.605 18-Nov-2006 09:21 1,666,560 IA-64 RTMGDR
Pngfilt.dll 5.2.3790.605 18-Nov-2006 09:21 105,984 IA-64 RTMGDR
Shdocvw.dll 6.0.3790.605 18-Nov-2006 09:21 3,375,616 IA-64 RTMGDR
Shlwapi.dll 6.0.3790.605 18-Nov-2006 09:21 740,352 IA-64 RTMGDR
Urlmon.dll 6.0.3790.605 18-Nov-2006 09:21 1,302,016 IA-64 RTMGDR
Wininet.dll 6.0.3790.605 18-Nov-2006 09:21 1,506,304 IA-64 RTMGDR
Wbrowseui.dll 6.0.3790.605 18-Nov-2006 09:21 1,057,280 x86 RTMGDR\WOW
Wcdfview.dll 6.0.3790.605 18-Nov-2006 09:21 147,968 x86 RTMGDR\WOW
Wdanim.dll 6.3.1.148 18-Nov-2006 09:21 993,280 x86 RTMGDR\WOW
Wdxtmsft.dll 6.3.3790.605 18-Nov-2006 09:21 351,744 x86 RTMGDR\WOW
Wdxtrans.dll 6.3.3790.605 18-Nov-2006 09:21 205,312 x86 RTMGDR\WOW
Wiepeers.dll 6.0.3790.605 18-Nov-2006 09:21 238,592 x86 RTMGDR\WOW
Winseng.dll 6.0.3790.605 18-Nov-2006 09:21 73,216 x86 RTMGDR\WOW
Wjsproxy.dll 6.0.3790.605 18-Nov-2006 09:21 14,848 x86 RTMGDR\WOW
Wmshtml.dll 6.0.3790.605 18-Nov-2006 09:21 2,937,344 x86 RTMGDR\WOW
Wmshtmled.dll 6.0.3790.605 18-Nov-2006 09:21 454,144 x86 RTMGDR\WOW
Wmsrating.dll 6.0.3790.605 18-Nov-2006 09:21 135,680 x86 RTMGDR\WOW
Wmstime.dll 6.0.3790.605 18-Nov-2006 09:21 504,832 x86 RTMGDR\WOW
Wpngfilt.dll 5.2.3790.605 18-Nov-2006 09:21 40,448 x86 RTMGDR\WOW
Wshdocvw.dll 6.0.3790.605 18-Nov-2006 09:21 1,398,272 x86 RTMGDR\WOW
Wshlwapi.dll 6.0.3790.605 18-Nov-2006 09:21 287,744 x86 RTMGDR\WOW
Wurlmon.dll 6.0.3790.605 18-Nov-2006 09:21 528,384 x86 RTMGDR\WOW
Wwdigest.dll 6.0.3790.605 18-Nov-2006 09:21 59,904 x86 RTMGDR\WOW
Wwininet.dll 6.0.3790.605 18-Nov-2006 09:21 626,688 x86 RTMGDR\WOW
Browseui.dll 6.0.3790.605 18-Nov-2006 09:20 2,538,496 IA-64 RTMQFE
Cdfview.dll 6.0.3790.605 18-Nov-2006 09:20 303,616 IA-64 RTMQFE
Digest.dll 6.0.3790.605 18-Nov-2006 09:20 141,312 IA-64 RTMQFE
Dxtmsft.dll 6.3.3790.605 18-Nov-2006 09:20 941,056 IA-64 RTMQFE
Dxtrans.dll 6.3.3790.605 18-Nov-2006 09:20 586,752 IA-64 RTMQFE
Iepeers.dll 6.0.3790.605 18-Nov-2006 09:20 678,912 IA-64 RTMQFE
Inseng.dll 6.0.3790.605 18-Nov-2006 09:20 217,600 IA-64 RTMQFE
Jsproxy.dll 6.0.3790.605 18-Nov-2006 09:20 36,864 IA-64 RTMQFE
Mshtml.dll 6.0.3790.605 18-Nov-2006 09:20 8,255,488 IA-64 RTMQFE
Mshtmled.dll 6.0.3790.605 18-Nov-2006 09:20 1,409,536 IA-64 RTMQFE
Msrating.dll 6.0.3790.605 18-Nov-2006 09:20 387,584 IA-64 RTMQFE
Mstime.dll 6.0.3790.605 18-Nov-2006 09:20 1,666,560 IA-64 RTMQFE
Pngfilt.dll 5.2.3790.605 18-Nov-2006 09:21 105,984 IA-64 RTMQFE
Shdocvw.dll 6.0.3790.605 18-Nov-2006 09:21 3,381,760 IA-64 RTMQFE
Shlwapi.dll 6.0.3790.605 18-Nov-2006 09:21 740,352 IA-64 RTMQFE
Urlmon.dll 6.0.3790.605 18-Nov-2006 09:21 1,302,016 IA-64 RTMQFE
Wininet.dll 6.0.3790.605 18-Nov-2006 09:21 1,519,616 IA-64 RTMQFE
Wbrowseui.dll 6.0.3790.605 18-Nov-2006 09:21 1,057,280 x86 RTMQFE\WOW
Wcdfview.dll 6.0.3790.605 18-Nov-2006 09:21 147,968 x86 RTMQFE\WOW
Wdanim.dll 6.3.1.148 18-Nov-2006 09:21 993,280 x86 RTMQFE\WOW
Wdxtmsft.dll 6.3.3790.605 18-Nov-2006 09:21 352,256 x86 RTMQFE\WOW
Wdxtrans.dll 6.3.3790.605 18-Nov-2006 09:21 205,312 x86 RTMQFE\WOW
Wiepeers.dll 6.0.3790.605 18-Nov-2006 09:21 239,104 x86 RTMQFE\WOW
Winseng.dll 6.0.3790.605 18-Nov-2006 09:21 73,216 x86 RTMQFE\WOW
Wjsproxy.dll 6.0.3790.605 18-Nov-2006 09:21 14,848 x86 RTMQFE\WOW
Wmshtml.dll 6.0.3790.605 18-Nov-2006 09:21 2,939,904 x86 RTMQFE\WOW
Wmshtmled.dll 6.0.3790.605 18-Nov-2006 09:21 454,144 x86 RTMQFE\WOW
Wmsrating.dll 6.0.3790.605 18-Nov-2006 09:21 135,680 x86 RTMQFE\WOW
Wmstime.dll 6.0.3790.605 18-Nov-2006 09:21 504,832 x86 RTMQFE\WOW
Wpngfilt.dll 5.2.3790.605 18-Nov-2006 09:21 40,448 x86 RTMQFE\WOW
Wshdocvw.dll 6.0.3790.605 18-Nov-2006 09:21 1,399,808 x86 RTMQFE\WOW
Wshlwapi.dll 6.0.3790.605 18-Nov-2006 09:21 287,744 x86 RTMQFE\WOW
Wurlmon.dll 6.0.3790.605 18-Nov-2006 09:21 528,384 x86 RTMQFE\WOW
Wwdigest.dll 6.0.3790.605 18-Nov-2006 09:21 59,904 x86 RTMQFE\WOW
Wwininet.dll 6.0.3790.605 18-Nov-2006 09:21 631,296 x86 RTMQFE\WOW
Browseui.dll 6.0.3790.2817 18-Nov-2006 09:25 2,542,080 IA-64 SP1GDR
Dxtmsft.dll 6.3.3790.2817 18-Nov-2006 09:25 1,009,152 IA-64 SP1GDR
Dxtrans.dll 6.3.3790.2817 18-Nov-2006 09:25 640,512 IA-64 SP1GDR
Iepeers.dll 6.0.3790.2817 18-Nov-2006 09:25 717,312 IA-64 SP1GDR
Jsproxy.dll 6.0.3790.2817 18-Nov-2006 09:25 45,568 IA-64 SP1GDR
Mshtml.dll 6.0.3790.2817 18-Nov-2006 09:25 9,361,408 IA-64 SP1GDR
Mstime.dll 6.0.3790.2817 18-Nov-2006 09:26 1,845,760 IA-64 SP1GDR
Pngfilt.dll 5.2.3790.2817 18-Nov-2006 09:26 116,736 IA-64 SP1GDR
Shdocvw.dll 6.0.3790.2817 18-Nov-2006 09:26 3,678,208 IA-64 SP1GDR
Shlwapi.dll 6.0.3790.2817 18-Nov-2006 09:26 823,296 IA-64 SP1GDR
Urlmon.dll 6.0.3790.2817 18-Nov-2006 09:26 1,613,312 IA-64 SP1GDR
W03a2409.dll 5.2.3790.2817 18-Nov-2006 09:26 3,072 IA-64 SP1GDR
Wininet.dll 6.0.3790.2817 18-Nov-2006 09:26 1,695,232 IA-64 SP1GDR
Wbrowseui.dll 6.0.3790.2817 18-Nov-2006 09:26 1,036,800 x86 SP1GDR\WOW
Wdanim.dll 6.3.1.148 18-Nov-2006 09:26 1,058,304 x86 SP1GDR\WOW
Wdxtmsft.dll 6.3.3790.2817 18-Nov-2006 09:26 363,008 x86 SP1GDR\WOW
Wdxtrans.dll 6.3.3790.2817 18-Nov-2006 09:26 212,480 x86 SP1GDR\WOW
Wiedw.exe 5.2.3790.2817 18-Nov-2006 09:26 17,920 x86 SP1GDR\WOW
Wiepeers.dll 6.0.3790.2817 18-Nov-2006 09:26 253,952 x86 SP1GDR\WOW
Wjsproxy.dll 6.0.3790.2817 18-Nov-2006 09:26 16,384 x86 SP1GDR\WOW
Wmshtml.dll 6.0.3790.2817 18-Nov-2006 09:26 3,153,920 x86 SP1GDR\WOW
Wmstime.dll 6.0.3790.2817 18-Nov-2006 09:26 537,088 x86 SP1GDR\WOW
Wpngfilt.dll 5.2.3790.2817 18-Nov-2006 09:26 42,496 x86 SP1GDR\WOW
Wshdocvw.dll 6.0.3790.2817 18-Nov-2006 09:26 1,514,496 x86 SP1GDR\WOW
Wshlwapi.dll 6.0.3790.2817 18-Nov-2006 09:26 321,536 x86 SP1GDR\WOW
Wurlmon.dll 6.0.3790.2817 18-Nov-2006 09:26 696,320 x86 SP1GDR\WOW
Ww03a2409.dll 5.2.3790.2817 18-Nov-2006 09:26 4,096 x86 SP1GDR\WOW
Wwininet.dll 6.0.3790.2817 18-Nov-2006 09:26 662,528 x86 SP1GDR\WOW
Browseui.dll 6.0.3790.2817 18-Nov-2006 09:20 2,541,568 IA-64 SP1QFE
Dxtmsft.dll 6.3.3790.2817 18-Nov-2006 09:20 1,009,152 IA-64 SP1QFE
Dxtrans.dll 6.3.3790.2817 18-Nov-2006 09:20 640,512 IA-64 SP1QFE
Iepeers.dll 6.0.3790.2817 18-Nov-2006 09:20 717,824 IA-64 SP1QFE
Jsproxy.dll 6.0.3790.2817 18-Nov-2006 09:20 45,568 IA-64 SP1QFE
Mshtml.dll 6.0.3790.2817 18-Nov-2006 09:20 9,368,064 IA-64 SP1QFE
Mstime.dll 6.0.3790.2817 18-Nov-2006 09:21 1,845,760 IA-64 SP1QFE
Pngfilt.dll 5.2.3790.2817 18-Nov-2006 09:21 116,736 IA-64 SP1QFE
Shdocvw.dll 6.0.3790.2817 18-Nov-2006 09:21 3,679,232 IA-64 SP1QFE
Shlwapi.dll 6.0.3790.2817 18-Nov-2006 09:21 823,296 IA-64 SP1QFE
Urlmon.dll 6.0.3790.2817 18-Nov-2006 09:21 1,614,336 IA-64 SP1QFE
W03a2409.dll 5.2.3790.2817 18-Nov-2006 09:21 26,112 IA-64 SP1QFE
Wininet.dll 6.0.3790.2817 18-Nov-2006 09:21 1,701,376 IA-64 SP1QFE
Wbrowseui.dll 6.0.3790.2817 18-Nov-2006 09:21 1,036,800 x86 SP1QFE\WOW
Wdanim.dll 6.3.1.148 18-Nov-2006 09:21 1,058,304 x86 SP1QFE\WOW
Wdxtmsft.dll 6.3.3790.2817 18-Nov-2006 09:21 363,008 x86 SP1QFE\WOW
Wdxtrans.dll 6.3.3790.2817 18-Nov-2006 09:21 212,480 x86 SP1QFE\WOW
Wiedw.exe 5.2.3790.2817 18-Nov-2006 09:21 17,920 x86 SP1QFE\WOW
Wiepeers.dll 6.0.3790.2817 18-Nov-2006 09:21 253,952 x86 SP1QFE\WOW
Wjsproxy.dll 6.0.3790.2817 18-Nov-2006 09:21 16,384 x86 SP1QFE\WOW
Wmshtml.dll 6.0.3790.2817 18-Nov-2006 09:21 3,156,992 x86 SP1QFE\WOW
Wmstime.dll 6.0.3790.2817 18-Nov-2006 09:21 537,088 x86 SP1QFE\WOW
Wpngfilt.dll 5.2.3790.2817 18-Nov-2006 09:21 42,496 x86 SP1QFE\WOW
Wshdocvw.dll 6.0.3790.2817 18-Nov-2006 09:21 1,515,520 x86 SP1QFE\WOW
Wshlwapi.dll 6.0.3790.2817 18-Nov-2006 09:21 321,536 x86 SP1QFE\WOW
Wurlmon.dll 6.0.3790.2817 18-Nov-2006 09:21 696,832 x86 SP1QFE\WOW
Ww03a2409.dll 5.2.3790.2817 18-Nov-2006 09:21 27,136 x86 SP1QFE\WOW
Wwininet.dll 6.0.3790.2817 18-Nov-2006 09:21 665,600 x86 SP1QFE\WOW

Windows Server 2003, Standard x64 Edition; Windows Server 2003, Enterprise x64 Edition; and Windows Server 2003, Datacenter x64 Edition; Windows Server 2003 R2, Standard x64 Edition; Windows Server 2003 R2, Enterprise x64 Edition; and Windows Server 2003 R2, Datacenter x64 Edition:

File Name Version Date Time Size CPU Folder
Browseui.dll 6.0.3790.2817 18-Nov-2006 09:22 1,604,608 x64 SP1GDR
Danim.dll 6.3.1.148 18-Nov-2006 09:22 1,989,120 x64 SP1GDR
Dxtmsft.dll 6.3.3790.2817 18-Nov-2006 09:22 561,664 x64 SP1GDR
Dxtrans.dll 6.3.3790.2817 18-Nov-2006 09:22 332,288 x64 SP1GDR
Iepeers.dll 6.0.3790.2817 18-Nov-2006 09:22 369,664 x64 SP1GDR
Jsproxy.dll 6.0.3790.2817 18-Nov-2006 09:22 24,064 x64 SP1GDR
Mshtml.dll 6.0.3790.2817 18-Nov-2006 09:22 5,995,520 x64 SP1GDR
Mstime.dll 6.0.3790.2817 18-Nov-2006 09:22 900,608 x64 SP1GDR
Pngfilt.dll 5.2.3790.2817 18-Nov-2006 09:22 64,000 x64 SP1GDR
Shdocvw.dll 6.0.3790.2817 18-Nov-2006 09:22 2,437,632 x64 SP1GDR
Shlwapi.dll 6.0.3790.2817 18-Nov-2006 09:22 621,568 x64 SP1GDR
Urlmon.dll 6.0.3790.2817 18-Nov-2006 09:22 1,083,904 x64 SP1GDR
W03a2409.dll 5.2.3790.2817 18-Nov-2006 09:22 4,608 x64 SP1GDR
Wininet.dll 6.0.3790.2817 18-Nov-2006 09:23 1,187,840 x64 SP1GDR
Wbrowseui.dll 6.0.3790.2817 18-Nov-2006 09:23 1,036,800 x86 SP1GDR\WOW
Wdanim.dll 6.3.1.148 18-Nov-2006 09:23 1,058,304 x86 SP1GDR\WOW
Wdxtmsft.dll 6.3.3790.2817 18-Nov-2006 09:23 363,008 x86 SP1GDR\WOW
Wdxtrans.dll 6.3.3790.2817 18-Nov-2006 09:23 212,480 x86 SP1GDR\WOW
Wiedw.exe 5.2.3790.2817 18-Nov-2006 09:23 17,920 x86 SP1GDR\WOW
Wiepeers.dll 6.0.3790.2817 18-Nov-2006 09:23 253,952 x86 SP1GDR\WOW
Wjsproxy.dll 6.0.3790.2817 18-Nov-2006 09:23 16,384 x86 SP1GDR\WOW
Wmshtml.dll 6.0.3790.2817 18-Nov-2006 09:23 3,153,920 x86 SP1GDR\WOW
Wmstime.dll 6.0.3790.2817 18-Nov-2006 09:23 537,088 x86 SP1GDR\WOW
Wpngfilt.dll 5.2.3790.2817 18-Nov-2006 09:23 42,496 x86 SP1GDR\WOW
Wshdocvw.dll 6.0.3790.2817 18-Nov-2006 09:23 1,514,496 x86 SP1GDR\WOW
Wshlwapi.dll 6.0.3790.2817 18-Nov-2006 09:23 321,536 x86 SP1GDR\WOW
Wurlmon.dll 6.0.3790.2817 18-Nov-2006 09:23 696,320 x86 SP1GDR\WOW
Ww03a2409.dll 5.2.3790.2817 18-Nov-2006 09:23 4,096 x86 SP1GDR\WOW
Wwininet.dll 6.0.3790.2817 18-Nov-2006 09:23 662,528 x86 SP1GDR\WOW
Browseui.dll 6.0.3790.2817 18-Nov-2006 09:13 1,604,608 x64 SP1QFE
Danim.dll 6.3.1.148 18-Nov-2006 09:13 1,989,120 x64 SP1QFE
Dxtmsft.dll 6.3.3790.2817 18-Nov-2006 09:13 561,664 x64 SP1QFE
Dxtrans.dll 6.3.3790.2817 18-Nov-2006 09:13 332,288 x64 SP1QFE
Iepeers.dll 6.0.3790.2817 18-Nov-2006 09:13 370,176 x64 SP1QFE
Jsproxy.dll 6.0.3790.2817 18-Nov-2006 09:13 24,064 x64 SP1QFE
Mshtml.dll 6.0.3790.2817 18-Nov-2006 09:13 5,998,592 x64 SP1QFE
Mstime.dll 6.0.3790.2817 18-Nov-2006 09:13 900,608 x64 SP1QFE
Pngfilt.dll 5.2.3790.2817 18-Nov-2006 09:13 64,000 x64 SP1QFE
Shdocvw.dll 6.0.3790.2817 18-Nov-2006 09:13 2,438,656 x64 SP1QFE
Shlwapi.dll 6.0.3790.2817 18-Nov-2006 09:14 621,568 x64 SP1QFE
Urlmon.dll 6.0.3790.2817 18-Nov-2006 09:14 1,083,904 x64 SP1QFE
W03a2409.dll 5.2.3790.2817 18-Nov-2006 09:14 27,648 x64 SP1QFE
Wininet.dll 6.0.3790.2817 18-Nov-2006 09:14 1,189,888 x64 SP1QFE
Wbrowseui.dll 6.0.3790.2817 18-Nov-2006 09:14 1,036,800 x86 SP1QFE\WOW
Wdanim.dll 6.3.1.148 18-Nov-2006 09:14 1,058,304 x86 SP1QFE\WOW
Wdxtmsft.dll 6.3.3790.2817 18-Nov-2006 09:14 363,008 x86 SP1QFE\WOW
Wdxtrans.dll 6.3.3790.2817 18-Nov-2006 09:14 212,480 x86 SP1QFE\WOW
Wiedw.exe 5.2.3790.2817 18-Nov-2006 09:14 17,920 x86 SP1QFE\WOW
Wiepeers.dll 6.0.3790.2817 18-Nov-2006 09:14 253,952 x86 SP1QFE\WOW
Wjsproxy.dll 6.0.3790.2817 18-Nov-2006 09:14 16,384 x86 SP1QFE\WOW
Wmshtml.dll 6.0.3790.2817 18-Nov-2006 09:14 3,156,992 x86 SP1QFE\WOW
Wmstime.dll 6.0.3790.2817 18-Nov-2006 09:14 537,088 x86 SP1QFE\WOW
Wpngfilt.dll 5.2.3790.2817 18-Nov-2006 09:14 42,496 x86 SP1QFE\WOW
Wshdocvw.dll 6.0.3790.2817 18-Nov-2006 09:14 1,515,520 x86 SP1QFE\WOW
Wshlwapi.dll 6.0.3790.2817 18-Nov-2006 09:14 321,536 x86 SP1QFE\WOW
Wurlmon.dll 6.0.3790.2817 18-Nov-2006 09:14 696,832 x86 SP1QFE\WOW
Ww03a2409.dll 5.2.3790.2817 18-Nov-2006 09:14 27,136 x86 SP1QFE\WOW
Wwininet.dll 6.0.3790.2817 18-Nov-2006 09:14 665,600 x86 SP1QFE\WOW

Notes When you install these security updates, the installer checks to see if one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.

If you have previously installed a hotfix to update one of these files, the installer copies the RTMQFE, SP1QFE, or SP2QFE files to your system. Otherwise, the installer copies the RTMGDR, SP1GDR, or SP2GDR files to your system. Security updates may not contain all variations of these files. For more information about this behavior, see Microsoft Knowledge Base Article 824994.

For more information about the Update.exe installer, visit the Microsoft TechNet Web site.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

To verify that a security update has been applied to an affected system, you can use the Microsoft Baseline Security Analyzer (MBSA) tool. MBSA allows administrators to scan local and remote systems for missing security updates and for common security misconfigurations. For more information about MBSA, visit the Microsoft Baseline Security Analyzer Web site.

  • File Version Verification

Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

  1. Click Start, and then click Search.
  2. In the Search Results pane, click All files and folders under Search Companion.
  3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
  4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties. Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
  5. On the Version tab, determine the version of the file that is installed on your computer by comparing it to the version that is documented in the appropriate file information table. Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
  • Registry Key Verification

You may also be able to verify the files that this security update has installed by reviewing the following registry key.

Windows Server 2003, Web Edition; Windows Server 2003, Standard Edition; Windows Server 2003, Datacenter Edition; Windows Server 2003, Enterprise Edition; Windows Small Business Server 2003; Windows Server 2003, Web Edition with SP1; Windows Server 2003, Standard Edition with SP1; Windows Server 2003, Enterprise Edition with SP1; Windows Server 2003, Datacenter Edition with SP1; Windows Server 2003 R2, Web Edition; Windows Server 2003 R2, Standard Edition; Windows Server 2003 R2, Datacenter Edition; Windows Server 2003 R2, Enterprise Edition; Windows Small Business Server 2003 R2; Windows Server 2003, Enterprise Edition for Itanium-based Systems; Windows Server 2003, Datacenter Edition for Itanium-based Systems; Windows Server 2003, Enterprise Edition with SP1 for Itanium-based Systems; Windows Server 2003, Datacenter Edition with SP1 for Itanium-based Systems; Windows Server 2003, Standard x64 Edition; Windows Server 2003, Enterprise x64 Edition; and Windows Server 2003, Datacenter x64 Edition; Windows Server 2003 R2, Standard x64 Edition; Windows Server 2003 R2, Enterprise x64 Edition; and Windows Server 2003 R2, Datacenter x64 Edition:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows Server 2003\SP2\KB925454\Filelist

Note This registry key may not contain a complete list of installed files. Also, this registry key may not be created correctly if an administrator or an OEM integrates or slipstreams the 925454 security update into the Windows installation source files.

Other Information

Acknowledgments

Microsoft thanks the following for working with us to help protect customers:

  • Jakob Balle and Carsten Eiram of Secunia Research for reporting the Script Error Handling Memory Corruption Vulnerability (CVE-2006-5579)
  • Sam Thomas, working with TippingPoint and the Zero Day Initiative, for reporting the DHTML Script Function Memory Corruption Vulnerability (CVE-2006-5581)
  • Yorick Koster of ITsec Security Services for reporting the TIF Folder Information Disclosure Vulnerability (CVE-2006-5578)

Obtaining Other Security Updates:

Updates for other security issues are available at the following locations:

Support:

  • Customers in the U.S. and Canada can receive technical support from Microsoft Product Support Services at 1-866-PCSAFETY. There is no charge for support calls that are associated with security updates.
  • International customers can receive support from their local Microsoft subsidiaries. There is no charge for support that is associated with security updates. For more information about how to contact Microsoft for support issues, visit the International Support Web site.

Security Resources:

Software Update Services:

By using Microsoft Software Update Services (SUS), administrators can quickly and reliably deploy the latest critical updates and security updates to Windows 2000 and Windows Server 2003-based servers, and to desktop systems that are running Windows 2000 Professional or Windows XP Professional.

For more information about how to deploy security updates by using Software Update Services, visit the Software Update Services Web site.

Windows Server Update Services:

By using Windows Server Update Services (WSUS), administrators can quickly and reliably deploy the latest critical updates and security updates for Windows 2000 operating systems and later, Office XP and later, Exchange Server 2003, and SQL Server 2000 onto Windows 2000 and later operating systems.

For more information about how to deploy security updates using Windows Server Update Services, visit the Windows Server Update Services Web site.

Systems Management Server:

Microsoft Systems Management Server (SMS) delivers a highly configurable enterprise solution for managing updates. By using SMS, administrators can identify Windows-based systems that require security updates and can perform controlled deployment of these updates throughout the enterprise with minimal disruption to end users. For more information about how administrators can use SMS 2003 to deploy security updates, visit the SMS 2003 Security Patch Management Web site. SMS 2.0 users can also use Software Updates Service Feature Pack to help deploy security updates. For information about SMS, visit the SMS Web site.

Note SMS uses the Microsoft Baseline Security Analyzer, the Microsoft Office Detection Tool, and the Enterprise Update Scan Tool to provide broad support for security bulletin update detection and deployment. Some software updates may not be detected by these tools. Administrators can use the inventory capabilities of the SMS in these cases to target updates to specific systems. For more information about this procedure, visit the following Web site. Some security updates require administrative rights following a restart of the system. Administrators can use the Elevated Rights Deployment Tool (available in the SMS 2003 Administration Feature Pack and in the SMS 2.0 Administration Feature Pack) to install these updates.

Disclaimer:

The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.

Revisions:

  • V1.0 (December 12, 2006): Bulletin published.
  • V1.1 (December 14, 2006): Bulletin revised to correct the file manifests for Windows XP Professional x64 Edition, Windows Server 2003 x64 Edition, Windows Server 2003 for Itanium-based Systems, and Windows Server 2003 with SP1 for Itanium-based Systems.

Built at 2014-04-18T13:49:36Z-07:00