Bug Check 0xFE: BUGCODE_USB_DRIVER

The BUGCODE_USB_DRIVER bug check has a value of 0x000000FE. This indicates that an error has occurred in a universal serial bus (USB) driver.

Important

This article is for programmers. If you're a customer who has received a blue screen error code while using your computer, see Troubleshoot blue screen errors.

BUGCODE_USB_DRIVER Parameters

The four bug check parameters are displayed on the bug check stop screen and available using !analyze. Parameter 1 identifies the type of violation.

Parameter 1 Parameter 2 Parameter 3 Parameter 4 Cause of Error
0x1 Reserved Reserved Reserved An internal error has occurred in the USB stack.
0x2 Address of the pending IRP Address of the IRP that was passed in Address of the USB request block (URB) that caused the error The USB client driver has submitted a URB that is still attached to another IRP pending in the bus driver.
0x3 Reserved Reserved Reserved The USB miniport driver has generated a bug check. This usually happens in response to a hardware failure.
0x4 Address of the IRP Address of the URB Reserved The caller has submitted an IRP that is already pending in the USB bus driver.
0x5 Device extension pointer of the host controller PCI vendor, product id for the controller Pointer to endpoint data structure A hardware failure has occurred because of a bad physical address found in a hardware data structure.
0x6 Object address Signature that was expected Reserved An internal data structure (object) is corrupted.
0x7 Pointer to usbport.sys debug log Message string File name See the provided message string for detailed information.
0x8 1 Reserved Reserved Reserved
2 Device object IRP An IRP was received by the hub driver that it does not expect or has not registered for.
3 Reserved Reserved Reserved
4 PDO if Parameter 3 is not NULL. Context if Parameter 3 is NULL. Context or NULL Fatal PDO trap
5 Reserved Reserved Reserved
6 Time-out code. See the table below. Time-out code context: port data Fatal time-out

If Parameter 1 has a value of 8 and Parameter 2 has a value of 6, then Parameter 3 is a time-out code. Possible values for the time-out code are given in the following table.

Time-out code Meaning

0

Non-fatal time-out

1

Failed resuming a suspended port.

2

Timed out waiting for a reset, initiated by a client driver, to complete before suspending the port.

3

Timed out waiting for the port to complete resume before suspending it.

4

Timed out waiting for the port-change state machine to be disabled prior to suspending the port.

5

Timed out waiting for a suspend-port request to complete.

6

Timed out waiting for the port-change state machine to be disabled.

7

Timed out waiting for the port-change state machine to be closed.

8

Timed out waiting for the hub to resume from selective suspend.

9

Timed out waiting for the hub to resume from selective suspend prior to system suspend.

10

Timed out waiting for port-change state machine to become idle.

Resolution

The !analyze debug extension displays information about the bug check and can be helpful in determining the root cause.