Modern Standby Stress with Driver Verifier's Concurrency Stress

  • Article

This test causes the system to enter and exit Connected Standby by pressing a software power button. It also performs I/O on devices before entering Connected Standby.

Test details

   
Specifications
  • System.Fundamentals.PowerManagement.ModernStandby.Quality
Platforms
  • Windows 10, client editions (x86)
  • Windows 10, client editions (x64)
  • Windows 10, client editions (Arm64)
  • Windows 10, mobile edition (Arm)
  • Windows 10, mobile edition (Arm64)
Supported Releases
  • Windows 10
  • Windows 10, version 1511
  • Windows 10, version 1607
  • Windows 10, version 1703
  • Windows 10, version 1709
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 300
Category Development
Timeout (in minutes) 300
Requires reboot false
Requires special configuration false
Type automatic

 

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

Running the test

Before you run the test, complete the test setup as described in the test requirements: WDTF System Fundamentals Testing Prerequisites.

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.

For troubleshooting information, see Troubleshooting System Fundamentals Testing.

This test returns Pass or Fail. To review test details, review the test log from Windows Hardware Lab Kit (Windows HLK) Studio.

More information

Parameter Description

DQ

The SDEL device query.

TestCycles

The number of test cycles for this test.

DelayBetweenCycles

The delay time in milliseconds between each test cycle.

IODuration

The I/O duration in milliseconds.

CSDuration

The Connected Standby duration in milliseconds.

VerifierFlags

The Driver Verifier flags to enable.

TestTimeoutValue

The timeout value for the execution of te.exe.

OptTeCmdlineParams

The optional command line parameters for te.exe.

 

Command syntax

Command option Description

TE.exe /inproc /enablewttlogging /appendwttlogging csstresscuzz.dll /p:DQ=[DQ] /p:TestCycles=[TestCycles] /p:DelayBetweenCycles=[DelayBetweenCycles] /p:IODuration=[IODuration] /p:CSDuration=[CSDuration] /p:VerifierFlags=[VerifierFlags]

Runs the Connected Standby Stress with Driver Verifier's Concurrency Stress (Logo) test job.

Note

   For command-line help for this test binary, type /h.

 

Parameters

Parameter name Parameter description
DQ SDEL Device Query
TestCycles Number of test cycles
DelayBetweenCycles Delay time in milliseconds between each test cycle
IODuration I/O duration in milliseconds
CSDuration Connected Standby duration in milliseconds
VerifierFlags Driver Verifier flags to enable
TestTimeoutValue Timeout value for the execution of te.exe
OptTeCmdlineParams Optional commandline parameters for te.exe
EnableDRIPSWatchdog Enable DRIPS watchdog
DRIPSWatchdogActionBitmask DRIPS watchdog action bitmask
DRIPSWatchdogTimeout DRIPS watchdog timeout in seconds