Deploy Work Folders with AD FS and Web Application Proxy: Step 1, Set-up AD FS

Applies To: Windows Server 2016

This topic describes the first step in deploying Work Folders with Active Directory Federation Services (AD FS) and Web Application Proxy. You can find the other steps in this process in these topics:

Note

The instructions covered in this section are for a Server 2016 environment. If you're using Windows Server 2012 R2, follow the Windows Server 2012 R2 instructions.

To set up AD FS for use with Work Folders, use the following procedures.

Pre-installment work

If you intend to convert the test environment that you're setting up with these instructions to production, there are two things that you might want to do before you start:

  • Set up an Active Directory domain administrator account to use to run the AD FS service.

  • Obtain a Secure Sockets Layer (SSL) subject alternative name (SAN) certificate for server authentication. For the test example, you will use a self-signed certificate but for production you should use a publicly trusted certificate.

Obtaining these items can take some time, depending on your company's policies, so it can be beneficial to start the request process for the items before you begin to create the test environment.

There are many commercial certificate authorities (CAs) from which you can purchase the certificate. You can find a list of the CAs that are trusted by Microsoft in KB article 931125. Another alternative is to get a certificate from your company's enterprise CA.

For the test environment, you will use a self-signed certificate that is created by one of the provided scripts.

Note

AD FS does not support Cryptography Next Generation (CNG) certificates, which means that you cannot create the self-signed certificate by using the Windows PowerShell cmdlet New-SelfSignedCertificate. You can, however, use the makecert.ps1 script included in the Deploying Work Folders with AD FS and Web Application Proxy blog post. This script creates a self-signed certificated that works with AD FS and prompts for the SAN names that will be needed to create the certificate.

Next, do the additional pre-installment work described in the following sections.

Create an AD FS self-signed certificate

To create an AD FS self-signed certificate, follow these steps:

  1. Download the scripts provided in the Deploying Work Folders with AD FS and Web Application Proxy blog post and then copy the file makecert.ps1 to the AD FS machine.

  2. Open a Windows PowerShell window with admin privileges.

  3. Set the execution policy to unrestricted:

    PS C:\temp\scripts> .\makecert.ps1 C:\temp\scripts> Set-ExecutionPolicy –ExecutionPolicy Unrestricted   
    
  4. Change to the directory where you copied the script.

  5. Execute the makecert script:

    PS C:\temp\scripts> .\makecert.ps1  
    
  6. When you are prompted to change the subject certificate, enter the new value for the subject. In this example, the value is blueadfs.contoso.com.

  7. When you are prompted to enter SAN names, press Y and then enter the SAN names, one at a time.

    For this example, type blueadfs.contoso.com and press Enter, then type 2016-adfs.contoso.com and press Enter, then type enterpriseregistration.contoso.com and press Enter.

    When all of the SAN names have been entered, press Enter on an empty line.

  8. When you are prompted to install the certificates to the Trusted Root Certification Authority store, press Y.

The AD FS certificate must be a SAN certificate with the following values:

  • AD FS service name.domain

  • enterpriseregistration.domain

  • AD FS server name.domain

In the test example, the values are:

  • blueadfs.contoso.com

  • enterpriseregistration.contoso.com

  • 2016-adfs.contoso.com

The enterpriseregistration SAN is needed for Workplace Join.

Set the server IP address

Change your server IP address to a static IP address. For the test example, use IP class A, which is 192.168.0.160 / subnet mask: 255.255.0.0 / Default Gateway: 192.168.0.1 / Preferred DNS: 192.168.0.150 (the IP address of your domain controller).

Install the AD FS role service

To install AD FS, follow these steps:

  1. Log on to the physical or virtual machine on which you plan to install AD FS, open Server Manager, and start the Add Roles and Features Wizard.

  2. On the Server Roles page, select the Active Directory Federation Services role, and then click Next.

  3. On the Active Directory Federation Services (AD FS) page, you will see a message that states that the Web Application Proxy role cannot be installed on the same computer as AD FS. Click Next.

  4. Click Install on the confirmation page.

To accomplish the equivalent installation of AD FS via Windows PowerShell, use these commands:

Add-WindowsFeature RSAT-AD-Tools  
Add-WindowsFeature AD FS-Federation –IncludeManagementTools  

Configure AD FS

Next, configure AD FS by using either Server Manager or Windows PowerShell.

Configure AD FS by using Server Manager

To configure AD FS by using Server Manager, follow these steps:

  1. Open Server Manager.

  2. Click the Notifications flag at the top of the Server Manager window, and then click Configure the federation service on this server.

  3. The Active Directory Federation Services Configuration Wizard launches. On the Connect to AD DS page, enter the domain administrator account that you want to use as the AD FS account, and click Next.

  4. On the Specify Service Properties page, enter the subject name of the SSL certificate to use for AD FS communication. In the test example, this is blueadfs.contoso.com.

  5. Enter the Federation Service name. In the test example, this is blueadfs.contoso.com. Click Next.

    Note

    The Federation Service name must not use the name of an existing server in the environment. If you do use the name of an existing server, the AD FS installation will fail and must be restarted.

  6. On the Specify Service Account page, enter the name that you would like to use for the managed service account. For the test example, select Create a Group Managed Service Account, and in Account Name, enter ADFSService. Click Next.

  7. On the Specify Configuration Database page, select Create a database on this server using Windows Internal Database, and click Next.

  8. The Review Options page shows you an overview of the options you have selected. Click Next.

  9. The Pre-requisite Checks page indicates whether all the prerequisite checks passed successfully. If there are no issues, click Configure.

    Note

    If you used the name of the AD FS server or any other existing machine for the Federation Service Name, an error message is displayed. You must start the installation over and choose a name other than the name of an existing machine.

  10. When the configuration completes successfully, the Results page confirms that AD FS was successfully configured.

Configure AD FS by using PowerShell

To accomplish the equivalent configuration of AD FS via Windows PowerShell, use the following commands.

To install AD FS:

Add-WindowsFeature RSAT-AD-Tools  
Add-WindowsFeature ADFS-Federation -IncludeManagementTools   

To create the managed service account:

New-ADServiceAccount "ADFSService"-Server 2016-DC.contoso.com -Path "CN=Managed Service Accounts,DC=Contoso,DC=COM" -DNSHostName 2016-ADFS.contoso.com -ServicePrincipalNames HTTP/2016-ADFS,HTTP/2016-ADFS.contoso.com  

After you configure AD FS, you must set up an AD FS farm by using the managed service account that you created in the previous step and the certificate you created in the pre-configuration steps.

To set up an AD FS farm:

$cert = Get-ChildItem CERT:\LocalMachine\My |where {$_.Subject -match blueadfs.contoso.com} | sort $_.NotAfter -Descending | select -first 1    
$thumbprint = $cert.Thumbprint  
Install-ADFSFarm -CertificateThumbprint $thumbprint -FederationServiceDisplayName "Contoso Corporation" –FederationServiceName blueadfs.contoso.com -GroupServiceAccountIdentifier contoso\ADFSService$ -OverwriteConfiguration -ErrorAction Stop  

Next step: Deploy Work Folders with AD FS and Web Application Proxy: Step 2, AD FS Post-Configuration Work

See Also

Work Folders Overview