PAGESETUPDLGA structure

Contains information the PageSetupDlg function uses to initialize the Page Setup dialog box. After the user closes the dialog box, the system returns information about the user-defined page parameters in this structure.

Syntax

typedef struct tagPSDA {
  DWORD           lStructSize;
  HWND            hwndOwner;
  HGLOBAL         hDevMode;
  HGLOBAL         hDevNames;
  DWORD           Flags;
  POINT           ptPaperSize;
  RECT            rtMinMargin;
  RECT            rtMargin;
  HINSTANCE       hInstance;
  LPARAM          lCustData;
  LPPAGESETUPHOOK lpfnPageSetupHook;
  LPPAGEPAINTHOOK lpfnPagePaintHook;
  LPCSTR          lpPageSetupTemplateName;
  HGLOBAL         hPageSetupTemplate;
} PAGESETUPDLGA, *LPPAGESETUPDLGA;

Members

lStructSize

Type: DWORD

The size, in bytes, of this structure.

hwndOwner

Type: HWND

A handle to the window that owns the dialog box. This member can be any valid window handle, or it can be NULL if the dialog box has no owner.

hDevMode

Type: HGLOBAL

A handle to a global memory object that contains a DEVMODE structure. On input, if a handle is specified, the values in the corresponding DEVMODE structure are used to initialize the controls in the dialog box. On output, the dialog box sets hDevMode to a global memory handle to a DEVMODE structure that contains values specifying the user's selections. If the user's selections are not available, the dialog box sets hDevMode to NULL.

hDevNames

Type: HGLOBAL

A handle to a global memory object that contains a DEVNAMES structure. This structure contains three strings that specify the driver name, the printer name, and the output port name. On input, if a handle is specified, the strings in the corresponding DEVNAMES structure are used to initialize controls in the dialog box. On output, the dialog box sets hDevNames to a global memory handle to a DEVNAMES structure that contains strings specifying the user's selections. If the user's selections are not available, the dialog box sets hDevNames to NULL.

Flags

Type: DWORD

A set of bit flags that you can use to initialize the Page Setup dialog box. When the dialog box returns, it sets these flags to indicate the user's input. This member can be one or more of the following values.

Value Meaning
PSD_DEFAULTMINMARGINS
0x00000000
Sets the minimum values that the user can specify for the page margins to be the minimum margins allowed by the printer. This is the default. This flag is ignored if the PSD_MARGINS and PSD_MINMARGINS flags are also specified.
PSD_DISABLEMARGINS
0x00000010
Disables the margin controls, preventing the user from setting the margins.
PSD_DISABLEORIENTATION
0x00000100
Disables the orientation controls, preventing the user from setting the page orientation.
PSD_DISABLEPAGEPAINTING
0x00080000
Prevents the dialog box from drawing the contents of the sample page. If you enable a PagePaintHook hook procedure, you can still draw the contents of the sample page.
PSD_DISABLEPAPER
0x00000200
Disables the paper controls, preventing the user from setting page parameters such as the paper size and source.
PSD_DISABLEPRINTER
0x00000020
Obsolete.

Windows XP/2000:  Disables the Printer button, preventing the user from invoking a dialog box that contains additional printer setup information.

PSD_ENABLEPAGEPAINTHOOK
0x00040000
Enables the hook procedure specified in the lpfnPagePaintHook member.
PSD_ENABLEPAGESETUPHOOK
0x00002000
Enables the hook procedure specified in the lpfnPageSetupHook member.
PSD_ENABLEPAGESETUPTEMPLATE
0x00008000
Indicates that the hInstance and lpPageSetupTemplateName members specify a dialog box template to use in place of the default template.
PSD_ENABLEPAGESETUPTEMPLATEHANDLE
0x00020000
Indicates that the hPageSetupTemplate member identifies a data block that contains a preloaded dialog box template. The system ignores the lpPageSetupTemplateName member if this flag is specified.
PSD_INHUNDREDTHSOFMILLIMETERS
0x00000008
Indicates that hundredths of millimeters are the unit of measurement for margins and paper size. The values in the rtMargin, rtMinMargin, and ptPaperSize members are in hundredths of millimeters. You can set this flag on input to override the default unit of measurement for the user's locale. When the function returns, the dialog box sets this flag to indicate the units used.
PSD_INTHOUSANDTHSOFINCHES
0x00000004
Indicates that thousandths of inches are the unit of measurement for margins and paper size. The values in the rtMargin, rtMinMargin, and ptPaperSize members are in thousandths of inches. You can set this flag on input to override the default unit of measurement for the user's locale. When the function returns, the dialog box sets this flag to indicate the units used.
PSD_INWININIINTLMEASURE
0x00000000
Reserved.
PSD_MARGINS
0x00000002
Causes the system to use the values specified in the rtMargin member as the initial widths for the left, top, right, and bottom margins. If PSD_MARGINS is not set, the system sets the initial widths to one inch for all margins.
PSD_MINMARGINS
0x00000001
Causes the system to use the values specified in the rtMinMargin member as the minimum allowable widths for the left, top, right, and bottom margins. The system prevents the user from entering a width that is less than the specified minimum. If PSD_MINMARGINS is not specified, the system sets the minimum allowable widths to those allowed by the printer.
PSD_NONETWORKBUTTON
0x00200000
Hides and disables the Network button.
PSD_NOWARNING
0x00000080
Prevents the system from displaying a warning message when there is no default printer.
PSD_RETURNDEFAULT
0x00000400

PageSetupDlg does not display the dialog box. Instead, it sets the hDevNames and hDevMode members to handles to DEVMODE and DEVNAMES structures that are initialized for the system default printer. PageSetupDlg returns an error if either hDevNames or hDevMode is not NULL.

PSD_SHOWHELP
0x00000800
Causes the dialog box to display the Help button. The hwndOwner member must specify the window to receive the HELPMSGSTRING registered messages that the dialog box sends when the user clicks the Help button.

ptPaperSize

Type: POINT

The dimensions of the paper selected by the user. The PSD_INTHOUSANDTHSOFINCHES or PSD_INHUNDREDTHSOFMILLIMETERS flag indicates the units of measurement.

rtMinMargin

Type: RECT

The minimum allowable widths for the left, top, right, and bottom margins. The system ignores this member if the PSD_MINMARGINS flag is not set. These values must be less than or equal to the values specified in the rtMargin member. The PSD_INTHOUSANDTHSOFINCHES or PSD_INHUNDREDTHSOFMILLIMETERS flag indicates the units of measurement.

rtMargin

Type: RECT

The widths of the left, top, right, and bottom margins. If you set the PSD_MARGINS flag, rtMargin specifies the initial margin values. When PageSetupDlg returns, rtMargin contains the margin widths selected by the user. The PSD_INHUNDREDTHSOFMILLIMETERS or PSD_INTHOUSANDTHSOFINCHES flag indicates the units of measurement.

hInstance

Type: HINSTANCE

If the PSD_ENABLEPAGESETUPTEMPLATE flag is set in the Flags member, hInstance is a handle to the application or module instance that contains the dialog box template named by the lpPageSetupTemplateName member.

lCustData

Type: LPARAM

Application-defined data that the system passes to the hook procedure identified by the lpfnPageSetupHook member. When the system sends the WM_INITDIALOG message to the hook procedure, the message's lParam parameter is a pointer to the PAGESETUPDLG structure specified when the dialog was created. The hook procedure can use this pointer to get the lCustData value.

lpfnPageSetupHook

Type: LPPAGESETUPHOOK

A pointer to a PageSetupHook hook procedure that can process messages intended for the dialog box. This member is ignored unless the PSD_ENABLEPAGESETUPHOOK flag is set in the Flags member.

lpfnPagePaintHook

Type: LPPAGEPAINTHOOK

A pointer to a PagePaintHook hook procedure that receives WM_PSD_* messages from the dialog box whenever the sample page is redrawn. By processing the messages, the hook procedure can customize the appearance of the sample page. This member is ignored unless the PSD_ENABLEPAGEPAINTHOOK flag is set in the Flags member.

lpPageSetupTemplateName

Type: LPCTSTR

The name of the dialog box template resource in the module identified by the hInstance member. This template is substituted for the standard dialog box template. For numbered dialog box resources, lpPageSetupTemplateName can be a value returned by the MAKEINTRESOURCE macro. This member is ignored unless the PSD_ENABLEPAGESETUPTEMPLATE flag is set in the Flags member.

hPageSetupTemplate

Type: HGLOBAL

If the PSD_ENABLEPAGESETUPTEMPLATEHANDLE flag is set in the Flags member, hPageSetupTemplate is a handle to a memory object containing a dialog box template.

Remarks

If the PSD_INHUNDREDTHSOFMILLIMETERS and PSD_INTHOUSANDTHSOFINCHES flags are not specified, the system queries the LOCALE_IMEASURE value of the default user locale to determine the unit of measure (either hundredths of millimeters or thousandths of inches) for the margin widths and paper size.

If both hDevNames and hDevMode have valid handles and the printer name specified by the wDeviceOffset member of the DEVNAMES structure is not the same as the name specified by the dmDeviceName member of the DEVMODE structure, the system uses the name specified by wDeviceOffset by default.

Requirements

   
Minimum supported client Windows 2000 Professional [desktop apps only]
Minimum supported server Windows 2000 Server [desktop apps only]
Header commdlg.h (include Windows.h)

See Also

Common Dialog Box Library

Conceptual

DEVMODE

DEVNAMES

MAKEINTRESOURCE

Other Resources

PagePaintHook

PageSetupDlg

PageSetupHook

Reference

WM_INITDIALOG