SHFileOperationA function

Copies, moves, renames, or deletes a file system object. This function has been replaced in Windows Vista by IFileOperation.

Syntax

int SHFileOperationA(
  LPSHFILEOPSTRUCTA lpFileOp
);

Parameters

lpFileOp

Type: LPSHFILEOPSTRUCT

A pointer to an SHFILEOPSTRUCT structure that contains information this function needs to carry out the specified operation. This parameter must contain a valid value that is not NULL. You are responsible for validating the value. If you do not validate it, you will experience unexpected results.

Return Value

Type: int

Returns zero if successful; otherwise nonzero. Applications normally should simply check for zero or nonzero.

It is good practice to examine the value of the fAnyOperationsAborted member of the SHFILEOPSTRUCT. SHFileOperation can return 0 for success if the user cancels the operation. If you do not check fAnyOperationsAborted as well as the return value, you cannot know that the function accomplished the full task you asked of it and you might proceed under incorrect assumptions.

Do not use GetLastError with the return values of this function.

To examine the nonzero values for troubleshooting purposes, they largely map to those defined in Winerror.h. However, several of its possible return values are based on pre-Win32 error codes, which in some cases overlap the later Winerror.h values without matching their meaning. Those particular values are detailed here, and for these specific values only these meanings should be accepted over the Winerror.h codes. However, these values are provided with these warnings:

  • These are pre-Win32 error codes and are no longer supported or defined in any public header file. To use them, you must either define them yourself or compare against the numerical value.
  • These error codes are subject to change and have historically done so.
  • These values are provided only as an aid in debugging. They should not be regarded as definitive.
Error Code Value Meaning
DE_SAMEFILE 0x71 The source and destination files are the same file.
DE_MANYSRC1DEST 0x72 Multiple file paths were specified in the source buffer, but only one destination file path.
DE_DIFFDIR 0x73 Rename operation was specified but the destination path is a different directory. Use the move operation instead.
DE_ROOTDIR 0x74 The source is a root directory, which cannot be moved or renamed.
DE_OPCANCELLED 0x75 The operation was canceled by the user, or silently canceled if the appropriate flags were supplied to SHFileOperation.
DE_DESTSUBTREE 0x76 The destination is a subtree of the source.
DE_ACCESSDENIEDSRC 0x78 Security settings denied access to the source.
DE_PATHTOODEEP 0x79 The source or destination path exceeded or would exceed MAX_PATH.
DE_MANYDEST 0x7A The operation involved multiple destination paths, which can fail in the case of a move operation.
DE_INVALIDFILES 0x7C The path in the source or destination or both was invalid.
DE_DESTSAMETREE 0x7D The source and destination have the same parent folder.
DE_FLDDESTISFILE 0x7E The destination path is an existing file.
DE_FILEDESTISFLD 0x80 The destination path is an existing folder.
DE_FILENAMETOOLONG 0x81 The name of the file exceeds MAX_PATH.
DE_DEST_IS_CDROM 0x82 The destination is a read-only CD-ROM, possibly unformatted.
DE_DEST_IS_DVD 0x83 The destination is a read-only DVD, possibly unformatted.
DE_DEST_IS_CDRECORD 0x84 The destination is a writable CD-ROM, possibly unformatted.
DE_FILE_TOO_LARGE 0x85 The file involved in the operation is too large for the destination media or file system.
DE_SRC_IS_CDROM 0x86 The source is a read-only CD-ROM, possibly unformatted.
DE_SRC_IS_DVD 0x87 The source is a read-only DVD, possibly unformatted.
DE_SRC_IS_CDRECORD 0x88 The source is a writable CD-ROM, possibly unformatted.
DE_ERROR_MAX 0xB7 MAX_PATH was exceeded during the operation.
0x402 An unknown error occurred. This is typically due to an invalid path in the source or destination. This error does not occur on Windows Vista and later.
ERRORONDEST 0x10000 An unspecified error occurred on the destination.
DE_ROOTDIR | ERRORONDEST 0x10074 Destination is a root directory and cannot be renamed.

Remarks

You should use fully qualified path names with this function. Using it with relative path names is not thread safe.

With two exceptions, you cannot use SHFileOperation to move special folders from a local drive to a remote computer by specifying a network path. The exceptions are the My Documents (CSIDL_PERSONAL, CSIDL_DOCUMENTS) and My Pictures folders (CSIDL_MYPICTURES).

When used to delete a file, SHFileOperation permanently deletes the file unless you set the FOF_ALLOWUNDO flag in the fFlags member of the SHFILEOPSTRUCT structure pointed to by lpFileOp. Setting that flag sends the file to the Recycle Bin. If you want to simply delete a file and guarantee that it is not placed in the Recycle Bin, use DeleteFile.

If a copy callback handler is exposed and registered, SHFileOperation calls it unless you set a flag such as FOF_NOCONFIRMATION in the fFlags member of the structure pointed to by lpFileOp. See ICopyHook::CopyCallback for details on implementing copy callback handlers.

File deletion is recursive unless you set the FOF_NORECURSION flag in lpFileOp.

Connecting Files

With Windows 2000 or later, it is possible to connect an HTML file with a folder that contains related files such as Graphics Interchange Format (GIF) images or style sheets. If file connection is enabled, when you move or copy the HTML file, the connected folder and all of its files are also moved or copied. Conversely, if you move the folder with the related files, the HTML file is also moved.

The HTML file must have a .htm or .html extension. You create the connection to the related files by placing the folder that contains them into the same folder as the HTML file. The name of the folder that contains the connected files must be the same as the name of the HTML file followed by "_files" or ".files" (this is case sensitive; for example, ".Files" does not work). An example is given here.

                <ol>
  • Create a file named Test.htm in the C:\Files directory (C:\Files\Test.htm).
  • Create a new folder named Test.files in the C:\Files directory (C:\Files\Test.files).
  • Populate the folder with a few files. Any file placed in this folder is connected to Test.htm.
  • Move or copy the Test.htm file to the C:\Files2 directory.
  • Note that the Test.files directory is now found in the C:\Files2 directory as well.
  • File connection is enabled by default. It can be disabled by adding a REG_DWORD entry, NoFileFolderConnection, as shown here:

    HKEY_CURRENT_USER
       Software
          Microsoft
             Windows
                CurrentVersion
                   Explorer
                      NoFileFolderConnection

    Setting NoFileFolderConnection to 1 disables file connection. If the value is set to zero or is missing, file connection is enabled.

    To move only the specified files and none of the connected files, set the FOF_NO_CONNECTED_ELEMENTS flag in the fFlags member of the structure pointed to by lpFileOp.

    Note that the use of a folder with a name like "MyFile_files" to define a connection may not be valid for localized versions of Windows. The term "files" may need to be replaced by the equivalent word in the local language.

    Requirements

       
    Windows version Windows XP [desktop apps only] Windows 2000 Server [desktop apps only]
    Target Platform Windows
    Header shellapi.h
    Library Shell32.lib
    DLL Shell32.dll (version 4.0 or later)