Edit

DIDEVICESTATE structure (dinputd.h)

  • Article

The DIDEVICESTATE structure returns information about the state of a force feedback device.

Syntax

typedef struct DIDEVICESTATE {
  DWORD dwSize;
  DWORD dwState;
  DWORD dwLoad;
} DIDEVICESTATE, *LPDIDEVICESTATE;

Members

dwSize

Specifies the size of the structure in bytes. This member must be initialized before the structure is used.

dwState

Indicates various aspects of the device state. Can indicate zero, one, or more of the following:

DIGFFS_EMPTY

Indicates that the force feedback device is devoid of any downloaded effects.

DIGFFS_STOPPED

Indicates that no effects are currently playing and the device is not paused.

DIGFFS_PAUSED

Indicates that playback of effects has been paused by a previous DISFFC_PAUSE command.

DIGFFS_ACTUATORSON

Indicates that the device's force-feedback actuators are enabled.

DIGFFS_ACTUATORSOFF

Indicates that the device's force-feedback actuators are disabled.

DIGFFS_POWERON

Indicates that power to the force-feedback system is currently available. If the device cannot report the power state, then neither DIGFFS_POWERON nor DIGFFS_POWEROFF should be returned.

DIGFFS_POWEROFF

Indicates that power to the force-feedback system is not currently available. If the device cannot report the power state, then neither DIGFFS_POWERON nor DIGFFS_POWEROFF should be returned.

DIGFFS_SAFETYSWITCHON

Indicates that the safety switch (dead-man switch) is currently on, meaning that the device can operate. If the device cannot report the state of the safety switch, then neither DIGFFS_SAFETYSWITCHON nor DIGFFS_SAFETYSWITCHOFF should be returned.

DIGFFS_SAFETYSWITCHOFF

Indicates that the safety switch (dead-man switch) is currently off, meaning that the device cannot operate. If the device cannot report the state of the safety switch, then neither DIGFFS_SAFETYSWITCHON nor DIGFFS_SAFETYSWITCHOFF should be returned.

DIGFFS_USERFFSWITCHON

Indicates that the user force-feedback switch is currently on, meaning that the device can operate. If the device cannot report the state of the user force-feedback switch, then neither DIGFFS_USERFFSWITCHON nor DIGFFS_USERFFSWITCHOFF should be returned.

DIGFFS_USERFFSWITCHOFF

Indicates that the user force-feedback switch is currently off, meaning that the device cannot operate. If the device cannot report the state of the user force-feedback switch, then neither DIGFFS_USERFFSWITCHON nor DIGFFS_USERFFSWITCHOFF should be returned.

DIGFFS_DEVICELOST

Indicates that the device suffered an unexpected failure and is in an indeterminate state. It must be reset either by unacquiring and reacquiring the device, or by explicitly sending a DISFFC_RESET command. For example, the device may be lost if the user suspends the computer, causing on-board memory on the device to be lost.

dwLoad

A value indicating the percentage of device memory in use. A value of zero indicates that the device memory is completely available. A value of 100 indicates that the device is full.

Requirements

Requirement Value
Header dinputd.h