CreateFile2 function (fileapi.h)
Creates or opens a file or I/O device. The most commonly used I/O devices are as follows: file, file stream, directory, physical disk, volume, console buffer, tape drive, communications resource, mailslot, and pipe. The function returns a handle that can be used to access the file or device for various types of I/O depending on the file or device and the flags and attributes specified.
When called from a Windows Store app, CreateFile2 is simplified. You can open only files or directories inside the ApplicationData.LocalFolder or Package.InstalledLocation directories. You can't open named pipes or mailslots or create encrypted files (FILE_ATTRIBUTE_ENCRYPTED).
HANDLE CreateFile2( [in] LPCWSTR lpFileName, [in] DWORD dwDesiredAccess, [in] DWORD dwShareMode, [in] DWORD dwCreationDisposition, [in, optional] LPCREATEFILE2_EXTENDED_PARAMETERS pCreateExParams );
The name of the file or device to be created or opened.
For information on special device names, see Defining an MS-DOS Device Name.
To create a file stream, specify the name of the file, a colon, and then the name of the stream. For more information, see File Streams.
The requested access to the file or device, which can be summarized as read, write, both or neither zero).
The most commonly used values are GENERIC_READ,
GENERIC_WRITE, or both
GENERIC_READ | GENERIC_WRITE). For more information, see
Generic Access Rights,
File Security and Access Rights,
File Access Rights Constants, and
If this parameter is zero, the application can query certain metadata such as file, directory, or device attributes without accessing that file or device, even if GENERIC_READ access would have been denied.
You cannot request an access mode that conflicts with the sharing mode that is specified by the dwShareMode parameter in an open request that already has an open handle.
For more information, see the Remarks section of this topic and Creating and Opening Files.
The requested sharing mode of the file or device, which can be read, write, both, delete, all of these, or none (refer to the following table). Access requests to attributes or extended attributes are not affected by this flag.
If this parameter is zero and CreateFile2 succeeds, the file or device cannot be shared and cannot be opened again until the handle to the file or device is closed. For more information, see the Remarks section.
You cannot request a sharing mode that conflicts with the access mode that is specified in an existing request that has an open handle. CreateFile2 would fail and the GetLastError function would return ERROR_SHARING_VIOLATION.
To enable a process to share a file or device while another process has the file or device open, use a compatible combination of one or more of the following values. For more information about valid combinations of this parameter with the dwDesiredAccess parameter, see Creating and Opening Files.
An action to take on a file or device that exists or does not exist.
For devices other than files, this parameter is usually set to OPEN_EXISTING.
For more information, see the Remarks section.
This parameter must be one of the following values, which cannot be combined:
[in, optional] pCreateExParams
Pointer to an optional CREATEFILE2_EXTENDED_PARAMETERS structure.
If the function succeeds, the return value is an open handle to the specified file, device, named pipe, or mail slot.
If the function fails, the return value is INVALID_HANDLE_VALUE. To get extended error information, call GetLastError.
To compile an application that uses the CreateFile2 function, define the _WIN32_WINNT macro as 0x0602 or later. For more information, see Using the Windows Headers.
CreateFile2 supports file interaction and most other types of I/O devices and mechanisms available to Windows developers. This section attempts to cover the varied issues developers may experience when using CreateFile2 in different contexts and with different I/O types. The text attempts to use the word file only when referring specifically to data stored in an actual file on a file system. However, some uses of file may be referring more generally to an I/O object that supports file-like mechanisms. This liberal use of the term file is particularly prevalent in constant names and parameter names because of the previously mentioned historical reasons.
When an application is finished using the object handle returned by CreateFile2, use the CloseHandle function to close the handle. This not only frees up system resources, but can have wider influence on things like sharing the file or device and committing data to disk. Specifics are noted within this topic as appropriate.
Some file systems, such as the NTFS file system, support compression or encryption for individual files and directories. On volumes that have a mounted file system with this support, a new file inherits the compression and encryption attributes of its directory.
You cannot use CreateFile2 to control compression, decompression, or decryption on a file or directory. For more information, see Creating and Opening Files, File Compression and Decompression, and File Encryption.
If the lpSecurityAttributes member of the CREATEFILE2_EXTENDED_PARAMETERS structure passed in the pCreateExParams parameter is NULL, the handle returned by CreateFile2 cannot be inherited by any child processes your application may create. The following information regarding this member also applies:
- If the bInheritHandle member variable is not FALSE, which is any nonzero value, then the handle can be inherited. Therefore it is critical this structure member be properly initialized to FALSE if you do not intend the handle to be inheritable.
- The access control lists (ACL) in the default security descriptor for a file or directory are inherited from its parent directory.
- The target file system must support security on files and directories for the lpSecurityDescriptor member to have an effect on them, which can be determined by using GetVolumeInformation.
|Server Message Block (SMB) 3.0 protocol||Yes|
|SMB 3.0 Transparent Failover (TFO)||No|
|SMB 3.0 with Scale-out File Shares (SO)||No|
|Cluster Shared Volume File System (CsvFS)||Yes|
|Resilient File System (ReFS)||Yes|
If FILE_FLAG_OPEN_REPARSE_POINT is specified:
- If an existing file is opened and it is a symbolic link, the handle returned is a handle to the symbolic link.
- If TRUNCATE_EXISTING or FILE_FLAG_DELETE_ON_CLOSE are specified, the file affected is a symbolic link.
If FILE_FLAG_OPEN_REPARSE_POINT is not specified:
- If an existing file is opened and it is a symbolic link, the handle returned is a handle to the target.
- If CREATE_ALWAYS, TRUNCATE_EXISTING, or FILE_FLAG_DELETE_ON_CLOSE are specified, the file affected is the target.
If you call CreateFile2 on a file that is pending deletion as a result of a previous call to DeleteFile, the function fails. The operating system delays file deletion until all handles to the file are closed. GetLastError returns ERROR_ACCESS_DENIED.
The dwDesiredAccess parameter can be zero, allowing the application to query file attributes without accessing the file if the application is running with adequate security settings. This is useful to test for the existence of a file without opening it for read and/or write access, or to obtain other statistics about the file or directory. See Obtaining and Setting File Information and GetFileInformationByHandle.
When an application creates a file across a network, it is better to use
GENERIC_READ | GENERIC_WRITE for
dwDesiredAccess than to use GENERIC_WRITE alone. The
resulting code is faster, because the redirector can use the cache manager and send fewer SMBs with more data.
This combination also avoids an issue where writing to a file across a network can occasionally return
For more information, see Creating and Opening Files.File Streams. CreateDirectory or CreateDirectoryEx.
To open a directory using CreateFile2, specify the FILE_FLAG_BACKUP_SEMANTICS flag as part of dwFileFlags member of the CREATEFILE2_EXTENDED_PARAMETERS structure passed in the pCreateExParams parameter. Appropriate security checks still apply when this flag is used without SE_BACKUP_NAME and SE_RESTORE_NAME privileges.
When using CreateFile2 to open a directory during defragmentation of a FAT or FAT32 file system volume, do not specify the MAXIMUM_ALLOWED access right. Access to the directory is denied if this is done. Specify the GENERIC_READ access right instead.
For more information, see About Directory Management.http://support.microsoft.com/kb/942448.
You can use the CreateFile2 function to open a physical disk drive or a volume, which returns a direct access storage device (DASD) handle that can be used with the DeviceIoControl function. This enables you to access the disk or volume directly, for example such disk metadata as the partition table. However, this type of access also exposes the disk drive or volume to potential data loss, because an incorrect write to a disk using this mechanism could make its contents inaccessible to the operating system. To ensure data integrity, be sure to become familiar with DeviceIoControl and how other APIs behave differently with a direct access handle as opposed to a file system handle.
The following requirements must be met for such a call to succeed:
- The caller must have administrative privileges. For more information, see Running with Special Privileges.
- The dwCreationDisposition parameter must have the OPEN_EXISTING flag.
- When opening a volume or floppy disk, the dwShareMode parameter must have the FILE_SHARE_WRITE flag.
|"\\.\PhysicalDrive0"||Opens the first physical drive.|
|"\\.\PhysicalDrive2"||Opens the third physical drive.|
To obtain the physical drive identifier for a volume, open a handle to the volume and call the DeviceIoControl function with IOCTL_VOLUME_GET_VOLUME_DISK_EXTENTS. This control code returns the disk number and offset for each of the volume's one or more extents; a volume can span multiple physical disks.
For an example of opening a physical drive, see Calling DeviceIoControl.
When opening a volume or removable media drive (for example, a floppy disk drive or flash memory thumb drive), the lpFileName string should be the following form: "\.\X:". Do not use a trailing backslash (\), which indicates the root directory of a drive. The following table shows some examples of drive strings.
|"\\.\A:"||Opens floppy disk drive A.|
|"\\.\C:"||Opens the C: volume.|
|"\\.\C:\"||Opens the file system of the C: volume.|
You can also open a volume by referring to its volume name. For more information, see Naming a Volume.
A volume contains one or more mounted file systems. Volume handles can be opened as noncached at the discretion of the particular file system, even when the noncached option is not specified in CreateFile2. You should assume that all Microsoft file systems open volume handles as noncached. The restrictions on noncached I/O for files also apply to volumes.
A file system may or may not require buffer alignment even though the data is noncached. However, if the noncached option is specified when opening a volume, buffer alignment is enforced regardless of the file system on the volume. It is recommended on all file systems that you open volume handles as noncached, and follow the noncached I/O restrictions.
For more information, see Backup.
To specify a COM port number greater than 9, use the following syntax: "\.\COM10". This syntax works for all port numbers and hardware that allows COM port numbers to be specified.
For more information about communications, see Communications.AllocConsole function. For console handles, set the CreateFile2 parameters as follows.
Use the CONIN$ value to specify console input.
Use the CONOUT$ value to specify console output.
When opening CONIN$, specify
FILE_SHARE_READ. When opening CONOUT$, specify
If the calling process inherits the console, or if a child process should be able to access the console,
this parameter must be
|dwCreationDisposition||You should specify OPEN_EXISTING when using CreateFile2 to open the console.|
Set the members of the CREATEFILE2_EXTENDED_PARAMETERS structure passed in the pCreateExParams parameter as follows.
|lpSecurityAttributes||If you want the console to be inherited, the bInheritHandle member of the SECURITY_ATTRIBUTES structure must be TRUE.|
The following table shows various settings of dwDesiredAccess and lpFileName.
|"CON"||GENERIC_READ||Opens console for input.|
|"CON"||GENERIC_WRITE||Opens console for output.|
||Causes CreateFile2 to fail; GetLastError returns ERROR_FILE_NOT_FOUND.|
For more information, see Mailslots.CreateNamedPipe function.
If the CreateNamedPipe function was not successfully called on the server prior to this operation, a pipe will not exist and CreateFile2 will fail with ERROR_FILE_NOT_FOUND.
If there is at least one active pipe instance but there are no available listener pipes on the server, which means all pipe instances are currently connected, CreateFile2 fails with ERROR_PIPE_BUSY.
For more information, see Pipes.
|Minimum supported client||Windows 8 [desktop apps | UWP apps]|
|Minimum supported server||Windows Server 2012 [desktop apps | UWP apps]|
|Header||fileapi.h (include Windows.h)|