Comandos de la CLI de Azure en el modo de Resource ManagerAzure CLI commands in Resource Manager mode

En este artículo se proporcionan la sintaxis y las opciones de los comandos de la interfaz de la línea de comandos (CLI) de Azure que normalmente se usan para crear y administrar recursos de Azure en el modelo de implementación de Azure Resource Manager.This article provides syntax and options for Azure command-line interface (CLI) commands you'd commonly use to create and manage Azure resources in the Azure Resource Manager deployment model. Para acceder a estos comandos, ejecute la CLI en el modo de Resource Manager (ARM).You access these commands by running the CLI in Resource Manager (arm) mode. Tenga en cuenta que esta no es una referencia completa y que la versión de CLI puede mostrar algunos comandos o parámetros diferentes.This is not a complete reference, and your CLI version may show slightly different commands or parameters. Para obtener una descripción general de los recursos y grupos de recursos de Azure, vea Información general del grupo de recursos de Azure.For a general overview of Azure resources and resource groups, see Azure Resource Manager Overview.

Nota

Este artículo muestra los comandos de modo de Resource Manager en la CLI de Azure, que suele llamar Azure CLI 1.0.This article shows Resource Manager mode commands in the Azure CLI, sometimes called Azure CLI 1.0. Para trabajar en el modelo de Resource Manager, también puede probar la CLI de Azure 2.0, nuestra CLI multiplataforma de última generación.To work in the Resource Manager model, you can also try the Azure CLI 2.0, our next generation multi-platform CLI. Obtenga más información sobre las CLI antigua y nueva de Azure.Find out more about the old and new Azure CLIs.

En primer lugar, instale la CLI de Azure y conéctese a su suscripción de Azure.To get started, first install the Azure CLI and connect to your Azure subscription.

Para las opciones y la sintaxis de comando actuales de la línea de comandos en el modo del Administrador de recursos, escriba azure help o, para mostrar la ayuda de un comando específico, azure help [command].For current command syntax and options at the command line in Resource Manager mode, type azure help or, to display help for a specific command, azure help [command]. También encontrará ejemplos de CLI en la documentación para crear y administrar servicios de Azure concretos.Also find CLI examples in the documentation for creating and managing specific Azure services.

Se muestran parámetros opcionales entre corchetes (por ejemplo, [parameter]).Optional parameters are shown in square brackets (for example, [parameter]). Los demás parámetros son obligatorios.All other parameters are required.

Además de los parámetros opcionales específicos de los comandos documentados aquí, existen tres parámetros opcionales que pueden usarse para mostrar el resultado detallado como opciones de solicitud y códigos de estado.In addition to command-specific optional parameters documented here, there are three optional parameters that can be used to display detailed output such as request options and status codes. El parámetro -v ofrece un resultado detallado y el parámetro -vv, un resultado incluso más detallado.The -v parameter provides verbose output, and the -vv parameter provides even more detailed verbose output. La opción --json mostrará el resultado en formato JSON sin procesar.The --json option outputs the result in raw json format.

Configuración del modo de Resource ManagerSetting the Resource Manager mode

Use el siguiente comando para habilitar los comandos de la CLI de Azure en modo de Resource Manager.Use the following command to enable Azure CLI Resource Manager mode commands.

azure config mode arm

Nota

El modo de Azure Resource Manager de la CLI y el modo de administración de servicios de Azure son mutuamente excluyentes.The CLI's Azure Resource Manager mode and Azure Service Management mode are mutually exclusive. Es decir, los recursos creados en un modo no se pueden administrar desde el otro.That is, resources created in one mode cannot be managed from the other mode.

cuenta de Azure: administración de la información de la cuentaazure account: Manage your account information

La herramienta usa la información de la suscripción de Azure para la conexión a su cuenta.Your Azure subscription information is used by the tool to connect to your account.

Enumerar las suscripciones importadasList the imported subscriptions

account list [options]

Mostrar detalles acerca de la suscripciónShow details about a subscription

account show [options] [subscriptionNameOrId]

Establecer la suscripción actualSet the current subscription

account set [options] <subscriptionNameOrId>

Quitar una suscripción o entorno, o borrar toda la información de cuenta y del entornoRemove a subscription or environment, or clear all of the stored account and environment info

account clear [options]

Comandos para administrar el entorno de cuentaCommands to manage your account environment

account env list [options]
account env show [options] [environment]
account env add [options] [environment]
account env set [options] [environment]
account env delete [options] [environment]

Azure AD: comandos para mostrar los objetos de Active Directoryazure ad: Commands to display Active Directory objects

Comandos para mostrar aplicaciones de Active DirectoryCommands to display active directory applications

ad app create [options]
ad app delete [options] <object-id>

Comandos para mostrar grupos de Active DirectoryCommands to display active directory groups

ad group list [options]
ad group show [options]

Comandos para proporcionar información de un subgrupo o miembro de Active DirectoryCommands to provide an active directory sub group or member info

ad group member list [options] [objectId]

Comandos para mostrar entidades de servicio de Active DirectoryCommands to display active directory service principals

ad sp list [options]
ad sp show [options]
ad sp create [options] <application-id>
ad sp delete [options] <object-id>

Comandos para mostrar usuarios de Active DirectoryCommands to display active directory users

ad user list [options]
ad user show [options]

azure availset: comandos para administrar los conjuntos de disponibilidadazure availset: commands to manage your availability sets

Crea un conjunto de disponibilidad dentro de un grupo de recursosCreates an availability set within a resource group

availset create [options] <resource-group> <name> <location> [tags]

Enumera los conjuntos de disponibilidad dentro de un grupo de recursosLists the availability sets within a resource group

availset list [options] <resource-group>

Obtiene un conjunto de disponibilidad dentro de un grupo de recursosGets one availability set within a resource group

availset show [options] <resource-group> <name>

Elimina un conjunto de disponibilidad dentro de un grupo de recursosDeletes one availability set within a resource group

availset delete [options] <resource-group> <name>

azure config: comandos para administrar la configuración localazure config: commands to manage your local settings

Mostrar ajustes de configuración de la CLI de AzureList Azure CLI configuration settings

config list [options]

Eliminar un valor de configuraciónDelete a config setting

config delete [options] <name>

Actualizar un valor de configuraciónUpdate a config setting

config set <name> <value>

Establece el modo de trabajo de la CLI de Azure como arm o asmSets the Azure CLI working mode to either arm or asm

config mode [options] <modename>

característica de Azure: comandos para administrar las características de la cuentaazure feature: commands to manage account features

Enumera todas las características disponibles para su suscripciónList all features available for your subscription

feature list [options]

Muestra una característicaShows a feature

feature show [options] <providerName> <featureName>

Registra una característica de vista previa de un proveedor de recursosRegisters a previewed feature of a resource provider

feature register [options] <providerName> <featureName>

azure group: comandos para administrar los grupos de recursosazure group: Commands to manage your resource groups

Crea un grupo de recursosCreates a resource group

group create [options] <name> <location>

Establece etiquetas para un grupo de recursosSet tags to a resource group

group set [options] <name> <tags>

Elimina un grupo de recursosDeletes a resource group

group delete [options] <name>

Enumera los grupos de recursos para la suscripciónLists the resource groups for your subscription

group list [options]

Muestra un grupo de recursos para la suscripciónShows a resource group for your subscription

group show [options] <name>

Comandos para administrar registros de grupo de recursosCommands to manage resource group logs

group log show [options] [name]

Comandos para administrar la implementación en un grupo de recursosCommands to manage your deployment in a resource group

group deployment create [options] [resource-group] [name]
group deployment list [options] <resource-group> [state]
group deployment show [options] <resource-group> [deployment-name]
group deployment stop [options] <resource-group> [deployment-name]

Comandos para administrar la plantilla de grupos de recursos local o de la galeríaCommands to manage your local or gallery resource group template

group template list [options]
group template show [options] <name>
group template download [options] [name] [file]
group template validate [options] <resource-group>

hdinsight de azure: comandos para administrar sus cuentas de HDInsightazure hdinsight: Commands to manage your HDInsight clusters

Comandos para crear o agregar a un archivo de configuración de clústerCommands to create or add to a cluster configuration file

hdinsight config create [options] <configFilePath> <overwrite>
hdinsight config add-config-values [options] <configFilePath>
hdinsight config add-script-action [options] <configFilePath>

Ejemplo: Crear un archivo de configuración que contenga una acción de sript para ejecutarlo al crear un clúster.Example: Create a configuration file that contains a script action to run when creating a cluster.

hdinsight config create "C:\myFiles\configFile.config"
hdinsight config add-script-action --configFilePath "C:\myFiles\configFile.config" --nodeType HeadNode --uri <scriptActionURI> --name myScriptAction --parameters "-param value"

Comando para crear un clúster en un grupo de recursosCommand to create a cluster in a resource group

hdinsight cluster create [options] <clusterName>

Ejemplo: Crear una clúster de Linux o StormExample: Create a Storm on Linux cluster

azure hdinsight cluster create -g myarmgroup -l westus -y Linux --clusterType Storm --version 3.2 --defaultStorageAccountName mystorageaccount --defaultStorageAccountKey <defaultStorageAccountKey> --defaultStorageContainer mycontainer --userName admin --password <clusterPassword> --sshUserName sshuser --sshPassword <sshPassword> --workerNodeCount 1 myNewCluster01

info:    Executing command hdinsight cluster create
+ Submitting the request to create cluster...
info:    hdinsight cluster create command OK

Ejemplo: Crear un clúster con una acción de scriptExample: Create a cluster with a script action

azure hdinsight cluster create -g myarmgroup -l westus -y Linux --clusterType Hadoop --version 3.2 --defaultStorageAccountName mystorageaccount --defaultStorageAccountKey <defaultStorageAccountKey> --defaultStorageContainer mycontainer --userName admin --password <clusterPassword> --sshUserName sshuser --sshPassword <sshPassword> --workerNodeCount 1 –configurationPath "C:\myFiles\configFile.config" myNewCluster01

info:    Executing command hdinsight cluster create
+ Submitting the request to create cluster...
info:    hdinsight cluster create command OK

Opciones de parámetro:Parameter options:

-h, --help                                                 output usage information
-v, --verbose                                              use verbose output
-vv                                                        more verbose with debug output
--json                                                     use json output
-g --resource-group <resource-group>                       The name of the resource group
-c, --clusterName <clusterName>                            HDInsight cluster name
-l, --location <location>                                  Data center location for the cluster
-y, --osType <osType>                                      HDInsight cluster operating system
'Windows' or 'Linux'
--version <version>                                        HDInsight cluster version
--clusterType <clusterType>                                HDInsight cluster type.
Hadoop | HBase | Spark | Storm
--defaultStorageAccountName <storageAccountName>           Storage account url to use for default HDInsight storage
--defaultStorageAccountKey <storageAccountKey>             Key to the storage account to use for default HDInsight storage
--defaultStorageContainer <storageContainer>               Container in the storage account to use for HDInsight default storage
--headNodeSize <headNodeSize>                              (Optional) Head node size for the cluster
--workerNodeCount <workerNodeCount>                        Number of worker nodes to use for the cluster
--workerNodeSize <workerNodeSize>                          (Optional) Worker node size for the cluster)
--zookeeperNodeSize <zookeeperNodeSize>                    (Optional) Zookeeper node size for the cluster
--userName <userName>                                      Cluster username
--password <password>                                      Cluster password
--sshUserName <sshUserName>                                SSH username (only for Linux clusters)
--sshPassword <sshPassword>                                SSH password (only for Linux clusters)
--sshPublicKey <sshPublicKey>                              SSH public key (only for Linux clusters)
--rdpUserName <rdpUserName>                                RDP username (only for Windows clusters)
--rdpPassword <rdpPassword>                                RDP password (only for Windows clusters)
--rdpAccessExpiry <rdpAccessExpiry>                        RDP access expiry.
For example 12/12/2015 (only for Windows clusters)
--virtualNetworkId <virtualNetworkId>                      (Optional) Virtual network ID for the cluster.
Value is a GUID for Windows cluster and ARM resource ID for Linux cluster)
--subnetName <subnetName>                                  (Optional) Subnet for the cluster
--additionalStorageAccounts <additionalStorageAccounts>    (Optional) Additional storage accounts.
Can be multiple.
In the format of 'accountName#accountKey'.
For example, --additionalStorageAccounts "acc1#key1;acc2#key2"
--hiveMetastoreServerName <hiveMetastoreServerName>        (Optional) SQL Server name for the external metastore for Hive
--hiveMetastoreDatabaseName <hiveMetastoreDatabaseName>    (Optional) Database name for the external metastore for Hive
--hiveMetastoreUserName <hiveMetastoreUserName>            (Optional) Database username for the external metastore for Hive
--hiveMetastorePassword <hiveMetastorePassword>            (Optional) Database password for the external metastore for Hive
--oozieMetastoreServerName <oozieMetastoreServerName>      (Optional) SQL Server name for the external metastore for Oozie
--oozieMetastoreDatabaseName <oozieMetastoreDatabaseName>  (Optional) Database name for the external metastore for Oozie
--oozieMetastoreUserName <oozieMetastoreUserName>          (Optional) Database username for the external metastore for Oozie
--oozieMetastorePassword <oozieMetastorePassword>          (Optional) Database password for the external metastore for Oozie
--configurationPath <configurationPath>                    (Optional) HDInsight cluster configuration file path
-s, --subscription <id>                                    The subscription id
--tags <tags>                                              Tags to set to the cluster.
Can be multiple.
In the format of 'name=value'.
Name is required and value is optional.
For example, --tags tag1=value1;tag2

Comando para eliminar un clústerCommand to delete a cluster

hdinsight cluster delete [options] <clusterName>

Comandos para mostrar los detalles del clústerCommand to show cluster details

hdinsight cluster show [options] <clusterName>

Comando para enumerar todos los clústeres (en un grupo de recursos específico, si se ofrece)Command to list all clusters (in a specific resource group, if provided)

hdinsight cluster list [options]

Comando para cambiar el tamaño de un clústerCommand to resize a cluster

hdinsight cluster resize [options] <clusterName> <targetInstanceCount>

Comando para habilitar el acceso HTTP para un clústerCommand to enable HTTP access for a cluster

hdinsight cluster enable-http-access [options] <clusterName> <userName> <password>

Comando para deshabilitar el acceso HTTP para un clústerCommand to disable HTTP access for a cluster

hdinsight cluster disable-http-access [options] <clusterName>

Comando para habilitar el acceso RDP para un clústerCommand to enable RDP access for a cluster

hdinsight cluster enable-rdp-access [options] <clusterName> <rdpUserName> <rdpPassword> <rdpExpiryDate>

Comando para deshabilitar el acceso HTTP para un clústerCommand to disable HTTP access for a cluster

hdinsight cluster disable-rdp-access [options] <clusterName>

Recuperar registros de operaciones de una suscripción, un correlationId, un grupo de recursos, un recurso o un proveedor de recursosRetrieve operation logs for a subscription, a correlationId, a resource group, resource, or resource provider

insights logs list [options]

azure location: comandos para obtener las ubicaciones disponibles para todos los tipos de recursosazure location: Commands to get the available locations for all resource types

Enumerar las ubicaciones disponiblesList the available locations

location list [options]

azure network: comandos para administrar los recursos de redazure network: Commands to manage network resources

Comandos para administrar redes virtualesCommands to manage virtual networks

network vnet create [options] <resource-group> <name> <location>

Crea una red virtual.Creates a virtual network. En el ejemplo siguiente, crearemos una red virtual denominada newvnet para myresourcegroup de grupo de recursos en la región Oeste de EE. UU.In the following example we create a virtual network named newvnet for resource group myresourcegroup in the West US region.

azure network vnet create myresourcegroup newvnet "west us"
info:    Executing command network vnet create
+ Looking up virtual network "newvnet"
+ Creating virtual network "newvnet"
 Loading virtual network state
data:    Id:                   /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet
data:    Name:                 newvnet
data:    Type:                 Microsoft.Network/virtualNetworks
data:    Location:             westus
data:    Tags:
data:    Provisioning state:   Succeeded
data:    Address prefixes:
data:     10.0.0.0/8
data:    DNS servers:
data:    Subnets:
data:
info:    network vnet create command OK

Opciones de parámetro:Parameter options:

 -h, --help                                 output usage information
 -v, --verbose                              use verbose output
--json                                     use json output
 -g, --resource-group <resource-group>      the name of the resource group
 -n, --name <name>                          the name of the virtual network
 -l, --location <location>                  the location
 -a, --address-prefixes <address-prefixes>  the comma separated list of address prefixes for this virtual network
  For example -a 10.0.0.0/24,10.0.1.0/24.
  Default value is 10.0.0.0/8

-d, --dns-servers <dns-servers>            the comma separated list of DNS servers IP addresses
 -t, --tags <tags>                          the tags set on this virtual network.
  Can be multiple. In the format of "name=value".
  Name is required and value is optional.
  For example, -t tag1=value1;tag2
 -s, --subscription <subscription>          the subscription identifier

network vnet set [options] <resource-group> <name>

Actualiza una configuración de red virtual dentro de un grupo de recursos.Updates a virtual network configuration within a resource group.

azure network vnet set myresourcegroup newvnet

info:    Executing command network vnet set
+ Looking up virtual network "newvnet"
+ Updating virtual network "newvnet"
+ Loading virtual network state
data:    Id:                   /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet
data:    Name:                 newvnet
data:    Type:                 Microsoft.Network/virtualNetworks
data:    Location:             westus
data:    Tags:
data:    Provisioning state:   Succeeded
data:    Address prefixes:
data:     10.0.0.0/8
data:    DNS servers:
data:    Subnets:
data:
info:    network vnet set command OK

Opciones de parámetro:Parameter options:

   -h, --help                                 output usage information
   -v, --verbose                              use verbose output
   --json                                     use json output
   -g, --resource-group <resource-group>      the name of the resource group
   -n, --name <name>                          the name of the virtual network
   -a, --address-prefixes <address-prefixes>  the comma separated list of address prefixes for this virtual network.
    For example -a 10.0.0.0/24,10.0.1.0/24.
    This list will be appended to the current list of address prefixes.
    The address prefixes in this list should not overlap between them.
    The address prefixes in this list should not overlap with existing address prefixes in the vnet.

   -d, --dns-servers [dns-servers]            the comma separated list of DNS servers IP addresses.
    This list will be appended to the current list of DNS server IP addresses.

   -t, --tags <tags>                          the tags set on this virtual network.
    Can be multiple. In the format of "name=value".
    Name is required and value is optional. For example, -t tag1=value1;tag2.
    This list will be appended to the current list of tags

   --no-tags                                  remove all existing tags
   -s, --subscription <subscription>          the subscription identifier

network vnet list [options] <resource-group>

El comando enumera todas las redes virtuales en un grupo de recursos.The command lists all virtual networks in a resource group.

C:\>azure network vnet list myresourcegroup

info:    Executing command network vnet list
+ Listing virtual networks
    data:    ID
   Name      Location  Address prefixes  DNS servers
data:    -------------------------------------------------------------------
------  --------  --------  ----------------  -----------
data:    /subscriptions/###############################/resourceGroups/
wvnet   newvnet   westus    10.0.0.0/8
info:    network vnet list command OK

Opciones de parámetro:Parameter options:

  -h, --help                             output usage information
  -v, --verbose                          use verbose output
  --json                                 use json output
  -g, --resource-group <resource-group>  the name of the resource group
  -s, --subscription <subscription>      the subscription identifier

network vnet show [options] <resource-group> <name>

El comando muestra las propiedades de red virtual en un grupo de recursos.The command shows the virtual network properties in a resource group.

azure network vnet show -g myresourcegroup -n newvnet

info:    Executing command network vnet show
+ Looking up virtual network "newvnet"
data:    Id:                   /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet
data:    Name:                 newvnet
data:    Type:                 Microsoft.Network/virtualNetworks
data:    Location:             westus
data:    Tags:
data:    Provisioning state:   Succeeded
data:    Address prefixes:
data:     10.0.0.0/8
data:    DNS servers:
data:    Subnets:
data:
info:    network vnet show command OK

network vnet delete [options] <resource-group> <name>

El comando quita una red virtual.The command removes a virtual network.

azure network vnet delete myresourcegroup newvnetX

info:    Executing command network vnet delete
+ Looking up virtual network "newvnetX"
Delete virtual network newvnetX? [y/n] y
+ Deleting virtual network "newvnetX"
info:    network vnet delete command OK

Opciones de parámetro:Parameter options:

 -h, --help                             output usage information
 -v, --verbose                          use verbose output
 --json                                 use json output
 -g, --resource-group <resource-group>  the name of the resource group
 -n, --name <name>                      the name of the virtual network
 -q, --quiet                            quiet mode, do not ask for delete confirmation
 -s, --subscription <subscription>      the subscription identifier

Comandos para administrar subredes virtualesCommands to manage virtual network subnets

network vnet subnet create [options] <resource-group> <vnet-name> <name>

Agrega otra subred a una red virtual existente.Adds another subnet to an existing virtual network.

azure network vnet subnet create -g myresourcegroup --vnet-name newvnet -n subnet --address-prefix 10.0.1.0/24

info:    Executing command network vnet subnet create
+ Looking up the subnet "subnet"
+ Creating subnet "subnet"
+ Looking up the subnet "subnet"
data:    Id:                        /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet/subnets/subnet
data:    Name:                      subnet
data:    Type:                      Microsoft.Network/virtualNetworks/subnets
data:    Provisioning state:        Succeeded
data:    Address prefix:            10.0.1.0/24
info:    network vnet subnet create command OK

Opciones de parámetro:Parameter options:

 -h, --help                                                       output usage information
 -v, --verbose                                                    use verbose output
     --json                                                           use json output
 -g, --resource-group <resource-group>                            the name of the resource group
 -e, --vnet-name <vnet-name>                                      the name of the virtual network
 -n, --name <name>                                                the name of the subnet
 -a, --address-prefix <address-prefix>                            the address prefix
 -w, --network-security-group-id <network-security-group-id>      the network security group identifier.
       e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/networkSecurityGroups/<nsg-name>
 -o, --network-security-group-name <network-security-group-name>  the network security group name
 -s, --subscription <subscription>                                the subscription identifier

network vnet subnet set [options] <resource-group> <vnet-name> <name>

Establece una subred de red virtual específica dentro de un grupo de recursos.Sets a specific virtual network subnet within a resource group.

C:\>azure network vnet subnet set -g myresourcegroup --vnet-name newvnet -n subnet1

info:    Executing command network vnet subnet set
+ Looking up the subnet "subnet1"
+ Setting subnet "subnet1"
+ Looking up the subnet "subnet1"
data:    Id:                        /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet/subnets/subnet1
data:    Name:                      subnet1
data:    Type:                      Microsoft.Network/virtualNetworks/subnets
data:    Provisioning state:        Succeeded
data:    Address prefix:            10.0.1.0/24
info:    network vnet subnet set command OK

network vnet subnet list [options] <resource-group> <vnet-name>

Enumera todas las subredes de red virtual para una red virtual específica dentro de un grupo de recursos.Lists all the virtual network subnets for a specific virtual network within a resource group.

azure network vnet subnet set -g myresourcegroup --vnet-name newvnet -n subnet1

info:    Executing command network vnet subnet set
+ Looking up the subnet "subnet1"
+ Setting subnet "subnet1"
+ Looking up the subnet "subnet1"
data:    Id:                        /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet/subnets/subnet1
data:    Name:                      subnet1
data:    Type:                      Microsoft.Network/virtualNetworks/subnets
data:    Provisioning state:        Succeeded
data:    Address prefix:            10.0.1.0/24
info:    network vnet subnet set command OK

network vnet subnet show [options] <resource-group> <vnet-name> <name>

Muestra las propiedades de la subred de red virtual.Displays virtual network subnet properties

azure network vnet subnet show -g myresourcegroup --vnet-name newvnet -n subnet1

info:    Executing command network vnet subnet show
+ Looking up the subnet "subnet1"
data:    Id:                        /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft
.Network/virtualNetworks/newvnet/subnets/subnet1
data:    Name:                      subnet1
data:    Type:                      Microsoft.Network/virtualNetworks/subnets
data:    Provisioning state:        Succeeded
data:    Address prefix:            10.0.1.0/24
info:    network vnet subnet show command OK

Opciones de parámetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-e, --vnet-name <vnet-name>            the name of the virtual network
-n, --name <name>                      the name of the subnet
-s, --subscription <subscription>      the subscription identifier

network vnet subnet delete [options] <resource-group> <vnet-name> <subnet-name>

Quita una subred de una red virtual existente.Removes a subnet from an existing virtual network.

azure network vnet subnet delete -g myresourcegroup --vnet-name newvnet -n subnet1

info:    Executing command network vnet subnet delete
+ Looking up the subnet "subnet1"
Delete subnet "subnet1"? [y/n] y
+ Deleting subnet "subnet1"
info:    network vnet subnet delete command OK

Opciones de parámetro:Parameter options:

 -h, --help                             output usage information
 -v, --verbose                          use verbose output
 --json                                 use json output
 -g, --resource-group <resource-group>  the name of the resource group
 -e, --vnet-name <vnet-name>            the name of the virtual network
 -n, --name <name>                      the subnet name
 -s, --subscription <subscription>      the subscription identifier
 -q, --quiet                            quiet mode, do not ask for delete confirmation

Comandos para administrar los equilibradores de cargaCommands to manage load balancers

network lb create [options] <resource-group> <name> <location>

Crea un conjunto de equilibrador de carga.Creates a load balancer set.

azure network lb create -g myresourcegroup -n mylb -l westus

info:    Executing command network lb create
+ Looking up the load balancer "mylb"
+ Creating load balancer "mylb"
+ Looking up the load balancer "mylb"
data:    Id:                           /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb
data:    Name:                         mylb
data:    Type:                         Microsoft.Network/loadBalancers
data:    Location:                     westus
data:    Provisioning state:           Succeeded
info:    network lb create command OK

Opciones de parámetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-n, --name <name>                      the name of the load balancer
-l, --location <location>              the location
-t, --tags <tags>                      the list of tags.
 Can be multiple. In the format of "name=value".
 Name is required and value is optional. For example, -t tag1=value1;tag2
-s, --subscription <subscription>      the subscription identifier

network lb list [options] <resource-group>

Enumera los recursos de Equilibrador de carga dentro de un grupo de recursos.Lists Load balancer resources within a resource group.

azure network lb list myresourcegroup

info:    Executing command network lb list
+ Getting the load balancers
data:    Name  Location
data:    ----  --------
data:    mylb  westus
info:    network lb list command OK

Opciones de parámetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-s, --subscription <subscription>      the subscription identifier

network lb show [options] <resource-group> <name>

Muestra información del equilibrador de un equilibrador de carga específico dentro de un grupo de recursos de carga.Displays load balancer information of a specific load balancer within a resource group

azure network lb show myresourcegroup mylb -v

info:    Executing command network lb show
verbose: Looking up the load balancer "mylb"
data:    Id:                           /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb
data:    Name:                         mylb
data:    Type:                         Microsoft.Network/loadBalancers
data:    Location:                     westus
data:    Provisioning state:           Succeeded
info:    network lb show command OK

Opciones de parámetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-n, --name <name>                      the name of the load balancer
-s, --subscription <subscription>      the subscription identifier

network lb delete [options] <resource-group> <name>

Elimina recursos de equilibrador de carga.Delete load balancer resources.

azure network lb delete  myresourcegroup mylb

info:    Executing command network lb delete
+ Looking up the load balancer "mylb"
Delete load balancer "mylb"? [y/n] y
+ Deleting load balancer "mylb"
info:    network lb delete command OK

Opciones de parámetro:Parameter options:

 -h, --help                             output usage information
 -v, --verbose                          use verbose output
 --json                                 use json output
 -g, --resource-group <resource-group>  the name of the resource group
 -n, --name <name>                      the name of the load balancer
 -q, --quiet                            quiet mode, do not ask for delete confirmation
 -s, --subscription <subscription>      the subscription identifier

Comandos para administrar los sondeos de un equilibrador de cargaCommands to manage probes of a load balancer

network lb probe create [options] <resource-group> <lb-name> <name>

Crear la configuración de sondeo de estado de mantenimiento en el equilibrador de carga.Create the probe configuration for health status in the load balancer. Tenga en cuenta que, para ejecutar este comando, el equilibrador de carga requiere un recurso frontend-ip (consulte el comando "azure network frontend-ip" para asignar una dirección ip al equilibrador de carga).Keep in mind to run this command, your load balancer requires a frontend-ip resource (Check out command "azure network frontend-ip" to assign an ip address to load balancer).

azure network lb probe create -g myresourcegroup --lb-name mylb -n mylbprobe --protocol tcp --port 80 -i 300

info:    Executing command network lb probe create
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
info:    network lb probe create command OK

Opciones de parámetro:Parameter options:

 -h, --help                             output usage information
 -v, --verbose                          use verbose output
 --json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-l, --lb-name <lb-name>                the name of the load balancer
-n, --name <name>                      the name of the probe
-p, --protocol <protocol>              the probe protocol
-o, --port <port>                      the probe port
-f, --path <path>                      the probe path
-i, --interval <interval>              the probe interval in seconds
-c, --count <count>                    the number of probes
-s, --subscription <subscription>      the subscription identifier

network lb probe set [options] <resource-group> <lb-name> <name>

Actualiza un sondeo de equilibrador de carga existente con los nuevos valores.Updates an existing load balancer probe with new values for it.

azure network lb probe set -g myresourcegroup -l mylb -n mylbprobe -p mylbprobe1 -p TCP -o 443 -i 300

info:    Executing command network lb probe set
    + Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
info:    network lb probe set command OK

Opciones de parámetroParameter options

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-l, --lb-name <lb-name>                the name of the load balancer
-n, --name <name>                      the name of the probe
-e, --new-probe-name <new-probe-name>  the new name of the probe
-p, --protocol <protocol>              the new value for probe protocol
-o, --port <port>                      the new value for probe port
-f, --path <path>                      the new value for probe path
-i, --interval <interval>              the new value for probe interval in seconds
-c, --count <count>                    the new value for number of probes
-s, --subscription <subscription>      the subscription identifier

network lb probe list [options] <resource-group> <lb-name>

Enumera las propiedades de sondeo para un conjunto de equilibrador de carga.List the probe properties for a load balancer set.

C:\>azure network lb probe list -g myresourcegroup -l mylb

info:    Executing command network lb probe list
+ Looking up the load balancer "mylb"
data:    Name       Protocol  Port  Path  Interval  Count
data:    ---------  --------  ----  ----  --------  -----
data:    mylbprobe  Tcp       443         300       2
info:    network lb probe list command OK

Opciones de parámetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-l, --lb-name <lb-name>                the name of the load balancer
-s, --subscription <subscription>      the subscription identifier


network lb probe delete [options] <resource-group> <lb-name> <name>

Quita el sondeo creado para el equilibrador de carga.Removes the probe created for the load balancer.

azure network lb probe delete -g myresourcegroup -l mylb -n mylbprobe

info:    Executing command network lb probe delete
+ Looking up the load balancer "mylb"
Delete a probe "mylbprobe?" [y/n] y
+ Updating load balancer "mylb"
info:    network lb probe delete command OK

Comandos para administrar las configuraciones de frontend ip de un equilibrador de cargaCommands to manage frontend ip configurations of a load balancer

network lb frontend-ip create [options] <resource-group> <lb-name> <name>

Crea una configuración de frontend IP a un conjunto existente de equilibrador de carga.Creates a frontend IP configuration to an existing load balancer set.

azure network lb frontend-ip create -g myresourcegroup --lb-name mylb -n myfrontendip -o Dynamic -e subnet -m newvnet

info:    Executing command network lb frontend-ip create
+ Looking up the load balancer "mylb"
+ Looking up the subnet "subnet"
+ Creating frontend IP configuration "myfrontendip"
+ Looking up the load balancer "mylb"
data:    Id:                           /subscriptions/###############################/resourceGroups/Myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb
/frontendIPConfigurations/myfrontendip
data:    Name:                         myfrontendip
data:    Type:                         Microsoft.Network/loadBalancers/frontendIPConfigurations
data:    Provisioning state:           Succeeded
data:    Private IP allocation method: Dynamic
data:    Private IP address:           10.0.1.4
data:    Subnet:                       id=/subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet/subnets/subnet
data:    Public IP address:
data:    Inbound NAT rules
data:    Outbound NAT rules
data:    Load balancing rules
data:
info:    network lb frontend-ip create command OK

network lb frontend-ip set [options] <resource-group> <lb-name> <name>

Actualiza una configuración existente de una dirección IP de servidor frontend. El siguiente comando agrega una IP pública denominada mypubip5 a una IP de frontend de equilibrador de carga existente denominada myfrontendip.Updates an existing configuration of a frontend IP.The command below adds a public IP called mypubip5 to an existing load balancer frontend IP named myfrontendip.

azure network lb frontend-ip set -g myresourcegroup --lb-name mylb -n myfrontendip -i mypubip5

info:    Executing command network lb frontend-ip set
+ Looking up the load balancer "mylb"
+ Looking up the public ip "mypubip5"
+ Updating load balancer "mylb"
+ Looking up the load balancer "mylb"
data:    Id:                           /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/frontendIPConfigurations/myfrontendip
data:    Name:                         myfrontendip
data:    Type:                         Microsoft.Network/loadBalancers/frontendIPConfigurations
data:    Provisioning state:           Succeeded
data:    Private IP allocation method: Dynamic
data:    Private IP address:
data:    Subnet:
data:    Public IP address:            id=/subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/publicIPAddresses/mypubip5
data:    Inbound NAT rules
data:    Outbound NAT rules
data:    Load balancing rules
data:
info:    network lb frontend-ip set command OK

Opciones de parámetro:Parameter options:

-h, --help                                                         output usage information
-v, --verbose                                                      use verbose output
--json                                                             use json output
-g, --resource-group <resource-group>                              the name of the resource group
-l, --lb-name <lb-name>                                            the name of the load balancer
-n, --name <name>                                                  the name of the frontend ip configuration
-a, --private-ip-address <private-ip-address>                      the private ip address
-o, --private-ip-allocation-method <private-ip-allocation-method>  the private ip allocation method [Static, Dynamic]
-u, --public-ip-id <public-ip-id>                                  the public ip identifier.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/publicIPAddresses/<public-ip-name>
-i, --public-ip-name <public-ip-name>                              the public ip name.
This public ip must exist in the same resource group as the lb.
Please use public-ip-id if that is not the case.
-b, --subnet-id <subnet-id>                                        the subnet id.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/VirtualNetworks/<vnet-name>/subnets/<subnet-name>
-e, --subnet-name <subnet-name>                                    the subnet name
-m, --vnet-name <vnet-name>                                        the virtual network name.
This virtual network must exist in the same resource group as the lb.
Please use subnet-id if that is not the case.
-s, --subscription <subscription>                                  the subscription identifier

network lb frontend-ip list [options] <resource-group> <lb-name>

Enumera todos los recursos IP de front-end configurados para el equilibrador de carga.Lists all the frontend IP resources configured for the load balancer.

azure network lb frontend-ip list -g myresourcegroup -l mylb

info:    Executing command network lb frontend-ip list
+ Looking up the load balancer "mylb"
data:    Name         Provisioning state  Private IP allocation method  Subnet
data:    -----------  ------------------  ----------------------------  ------
data:    myprivateip  Succeeded           Dynamic
info:    network lb frontend-ip list command OK

Opciones de parámetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-l, --lb-name <lb-name>                the name of the load balancer
-s, --subscription <subscription>      the subscription identifier

network lb frontend-ip delete [options] <resource-group> <lb-name> <name>

Elimina el objeto IP frontend asociado para el equilibrador de cargaDeletes the frontend IP object associated to load balancer

network lb frontend-ip delete -g myresourcegroup -l mylb -n myfrontendip
info:    Executing command network lb frontend-ip delete
+ Looking up the load balancer "mylb"
Delete frontend ip configuration "myfrontendip"? [y/n] y
+ Updating load balancer "mylb"

Opciones de parámetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-l, --lb-name <lb-name>                the name of the load balancer
-n, --name <name>                      the name of the frontend ip configuration
-q, --quiet                            quiet mode, do not ask for delete confirmation
-s, --subscription <subscription>      the subscription identifier

Comandos para administrar grupos de direcciones de backend de un equilibrador de cargaCommands to manage backend address pools of a load balancer

network lb address-pool create [options] <resource-group> <lb-name> <name>

Crea un grupo de direcciones de back-end para un equilibrador de carga.Create a backend address pool for a load balancer.

azure network lb address-pool create -g myresourcegroup --lb-name mylb -n myaddresspool

info:    Executing command network lb address-pool create
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
+ Looking up the load balancer "mylb"
data:    Id:                        /subscriptions/###############################/resourceGroups/myresourgroup/providers/Microso.Network/loadBalancers/mylb/backendAddressPools/myaddresspool
data:    Name:                      myaddresspool
data:    Type:                      Microsoft.Network/loadBalancers/backendAddressPools
data:    Provisioning state:        Succeeded
data:    Backend IP configurations:
data:    Load balancing rules:
data:
info:    network lb address-pool create command OK

Opciones de parámetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-l, --lb-name <lb-name>                the name of the load balancer
-n, --name <name>                      the name of the backend address pool
-s, --subscription <subscription>      the subscription identifier

network lb address-pool list [options] <resource-group> <lb-name>

Enumerar el intervalo de grupo de direcciones IP de backend para un grupo de recursos específicosList backend IP address pool range for a specific resource group

azure network lb address-pool list -g myresourcegroup -l mylb

info:    Executing command network lb address-pool list
+ Looking up the load balancer "mylb"
data:    Name           Provisioning state
data:    -------------  ------------------
data:    mybackendpool  Succeeded
info:    network lb address-pool list command OK

Opciones de parámetro:Parameter options:

 -h, --help                             output usage information
 -v, --verbose                          use verbose output
 --json                                 use json output
 -g, --resource-group <resource-group>  the name of the resource group
 -l, --lb-name <lb-name>                the name of the load balancer
 -s, --subscription <subscription>      the subscription identifier


network lb address-pool delete [options] network lb address-pool delete [options]

Quita el recurso de intervalo de grupo IP de backend de equilibrador de carga.Removes the backend IP pool range resource from load balancer.

azure network lb address-pool delete -g myresourcegroup -l mylb -n mybackendpool

info:    Executing command network lb address-pool delete
+ Looking up the load balancer "mylb"
Delete backend address pool "mybackendpool"? [y/n] y
+ Updating load balancer "mylb"
info:    network lb address-pool delete command OK

Opciones de parámetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-l, --lb-name <lb-name>                the name of the load balancer
-n, --name <name>                      the name of the backend address pool
-q, --quiet                            quiet mode, do not ask for delete confirmation
-s, --subscription <subscription>      the subscription identifier

Comandos para administrar reglas de equilibradores de cargaCommands to manage load balancer rules

network lb rule create [options] <resource-group> <lb-name> <name>

Crea reglas de equilibrador de carga.Create load balancer rules.

Puede crear una regla de equilibrador de carga configurando el punto de conexión de front-end para el equilibrador de carga y el intervalo de grupo de direcciones de back-end para recibir el tráfico de red entrante.You can create a load balancer rule configuring the frontend endpoint for the load balancer and the backend address pool range to receive the incoming network traffic. La configuración también incluye los puertos para el extremo IP de frontend y los puertos para el intervalo de grupo de direcciones de backend.Settings also include the ports for frontend IP endpoint and ports for the backend address pool range.

En el siguiente ejemplo se muestra cómo crear una regla de equilibrador de carga, el punto de conexión de front-end que escucha el puerto TCP 80 y el tráfico de red de equilibrio de carga que se envía al puerto 8080 para el intervalo de grupo de direcciones de back-end.The following example shows how to create a load balancer rule, the frontend endpoint listening to port 80 TCP and load balancing network traffic sending to port 8080 for the backend address pool range.

azure network lb rule create -g myresourcegroup -l mylb -n mylbrule -p tcp -f 80 -b 8080 -i 10


info:    Executing command network lb rule create
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
+ Loading rule state
data:    Id:                        /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/loadBalancingRules/mylbrule
data:    Name:                      mylbrule
data:    Type:                      Microsoft.Network/loadBalancers/loadBalancingRules
data:    Provisioning state:        Succeeded
data:    Frontend IP configuration: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/frontendIPConfigurations/myfrontendip
data:    Backend address pool:      id=/subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/backendAddressPools/mybackendpool
data:    Protocol:                  Tcp
data:    Frontend port:             80
data:    Backend port:              8080
data:    Enable floating IP:        false
data:    Idle timeout in minutes:   10
data:    Probes
data:
info:    network lb rule create command OK

network lb rule set [options] <resource-group> <lb-name> <name>

Actualiza una regla existente del equilibrador de carga establecida en un grupo de recursos específico.Updates an existing load balancer rule set in a specific resource group. En el siguiente ejemplo se cambió el nombre de la regla de mylbrule a mynewlbrule.In the following example, we changed the rule name from mylbrule to mynewlbrule.

azure network lb rule set -g myresourcegroup -l mylb -n mylbrule -r mynewlbrule -p tcp -f 80 -b 8080 -i 10 -t myfrontendip -o mybackendpool

info:    Executing command network lb rule set
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
+ Loading rule state
data:    Id:                        /subscriptions/###############################/resourceGroups/yresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/loadBalancingRules/mynewlbrule
data:    Name:                      mynewlbrule
data:    Type:                      Microsoft.Network/loadBalancers/loadBalancingRules
data:    Provisioning state:        Succeeded
data:    Frontend IP configuration: /subscriptions/###############################/resourceGroups/yresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/frontendIPConfigurations/myfrontendip
data:    Backend address pool:      id=/subscriptions/###############################/resourceGroups/yresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/backendAddressPools/mybackendpool
data:    Protocol:                  Tcp
data:    Frontend port:             80
data:    Backend port:              8080
data:    Enable floating IP:        false
data:    Idle timeout in minutes:   10
data:    Probes
data:
info:    network lb rule set command OK

Opciones de parámetro:Parameter options:

-h, --help                                         output usage information
-v, --verbose                                      use verbose output
--json                                             use json output
-g, --resource-group <resource-group>              the name of the resource group
-l, --lb-name <lb-name>                            the name of the load balancer
-n, --name <name>                                  the name of the rule
-r, --new-rule-name <new-rule-name>                new rule name
-p, --protocol <protocol>                          the rule protocol
-f, --frontend-port <frontend-port>                the frontend port
-b, --backend-port <backend-port>                  the backend port
-e, --enable-floating-ip <enable-floating-ip>      enable floating point ip
-i, --idle-timeout <idle-timeout>                  the idle timeout in minutes
-a, --probe-name [probe-name]                      the name of the probe defined in the same load balancer
-t, --frontend-ip-name <frontend-ip-name>          the name of the frontend ip configuration in the same load balancer
-o, --backend-address-pool <backend-address-pool>  name of the backend address pool defined in the same load balancer
-s, --subscription <subscription>                  the subscription identifier


network lb rule list [options] <resource-group> <lb-name>

Enumera todas las reglas configuradas para un equilibrador de carga de un grupo de recursos específico.Lists all load balancer rules configured for a load balancer in a specific resource group.

azure network lb rule list -g myresourcegroup -l mylb

info:    Executing command network lb rule list
+ Looking up the load balancer "mylb"
data:    Name         Provisioning state  Protocol  Frontend port  Backend port  Enable floating IP  Idle timeout in minutes  Backend address pool  Probe data

data:    mynewlbrule  Succeeded           Tcp       80             8080          false               10                       /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/backendAddressPools/mybackendpool
info:    network lb rule list command OK

Opciones de parámetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-l, --lb-name <lb-name>                the name of the load balancer
-s, --subscription <subscription>      the subscription identifier

network lb rule delete [options] <resource-group> <lb-name> <name>

Elimina una regla de equilibrador de carga.Deletes a load balancer rule.

azure network lb rule delete -g myresourcegroup -l mylb -n mynewlbrule

info:    Executing command network lb rule delete
+ Looking up the load balancer "mylb"
Delete load balancing rule mynewlbrule? [y/n] y
+ Updating load balancer "mylb"
info:    network lb rule delete command OK

Opciones de parámetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-l, --lb-name <lb-name>                the name of the load balancer
-n, --name <name>                      the name of the rule
-q, --quiet                            quiet mode, do not ask for delete confirmation
-s, --subscription <subscription>      the subscription identifier

Comandos para administrar reglas NAT de entrada de equilibradores de cargaCommands to manage load balancer inbound NAT rules

network lb inbound-nat-rule create [options] <resource-group> <lb-name> <name>

Crea una regla NAT de entrada para el equilibrador de carga.Creates an inbound NAT rule for load balancer.

En el ejemplo siguiente se crea una regla NAT de IP de front-end (que se definió anteriormente mediante el comando "azure network frontend-ip") con un puerto de escucha entrante y el puerto de salida que el equilibrador de carga usa para enviar el tráfico de red.In the following example we created a NAT rule from frontend IP (which was previously defined using the "azure network frontend-ip" command) with an inbound listening port and outbound port that the load balancer uses to send the network traffic.

azure network lb inbound-nat-rule create -g myresourcegroup -l mylb -n myinboundnat -p tcp -f 80 -b 8080 -i myfrontendip

info:    Executing command network lb inbound-nat-rule create
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
+ Looking up the load balancer "mylb"
data:    Id:                        /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/inboundNatRules/myinboundnat
data:    Name:                      myinboundnat
data:    Type:                      Microsoft.Network/loadBalancers/inboundNatRules
data:    Provisioning state:        Succeeded
data:    Frontend IP Configuration: id=/subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/frontendIPConfigurations/myfrontendip
data:    Backend IP configuration
data:    Protocol                   Tcp
data:    Frontend port              80
data:    Backend port               8080
data:    Enable floating IP         false
info:    network lb inbound-nat-rule create command OK

Opciones de parámetro:Parameter options:

-h, --help                                     output usage information
-v, --verbose                                  use verbose output
--json                                         use json output
-g, --resource-group <resource-group>          the name of the resource group
-l, --lb-name <lb-name>                        the name of the load balancer
-n, --name <name>                              the name of the inbound NAT rule
-p, --protocol <protocol>                      the rule protocol [tcp,udp]
-f, --frontend-port <frontend-port>            the frontend port [0-65535]
-b, --backend-port <backend-port>              the backend port [0-65535]
-e, --enable-floating-ip <enable-floating-ip>  enable floating point ip [true,false]
-i, --frontend-ip <frontend-ip>                the name of the frontend ip configuration
-m, --vm-id <vm-id>                            the VM id.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Compute/virtualMachines/<vm-name>
-a, --vm-name <vm-name>                        the VM name.This VM must exist in the same resource group as the lb.
Please use vm-id if that is not the case.
this parameter will be ignored if --vm-id is specified
-s, --subscription <subscription>              the subscription identifier

network lb inbound-nat-rule set [options] <resource-group> <lb-name> <name>

Actualiza una regla NAT de entrada existente.Updates an existing inbound nat rule. En el siguiente ejemplo se cambió el puerto de escucha entrante de 80 a 81.In the following example, we changed the inbound listening port from 80 to 81.

azure network lb inbound-nat-rule set -g group-1 -l mylb -n myinboundnat -p tcp -f 81 -b 8080 -i myfrontendip

info:    Executing command network lb inbound-nat-rule set
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
+ Looking up the load balancer "mylb"
data:    Id:                        /subscriptions/###############################/resourceGroups/group-1/providers/Microsoft.Network/loadBalancers/mylb/inboundNatRules/myinboundnat
data:    Name:                      myinboundnat
data:    Type:                      Microsoft.Network/loadBalancers/inboundNatRules
data:    Provisioning state:        Succeeded
data:    Frontend IP Configuration: id=/subscriptions/###############################/resourceGroups/group-1/providers/Microsoft.Network/loadBalancers/mylb/frontendIPConfigurations/myfrontendip
data:    Backend IP configuration
data:    Protocol                   Tcp
data:    Frontend port              81
data:    Backend port               8080
data:    Enable floating IP         false
info:    network lb inbound-nat-rule set command OK

Opciones de parámetro:Parameter options:

-h, --help                                     output usage information
-v, --verbose                                  use verbose output
--json                                         use json output
-g, --resource-group <resource-group>          the name of the resource group
-l, --lb-name <lb-name>                        the name of the load balancer
-n, --name <name>                              the name of the inbound NAT rule
-p, --protocol <protocol>                      the rule protocol [tcp,udp]
-f, --frontend-port <frontend-port>            the frontend port [0-65535]
-b, --backend-port <backend-port>              the backend port [0-65535]
-e, --enable-floating-ip <enable-floating-ip>  enable floating point ip [true,false]
-i, --frontend-ip <frontend-ip>                the name of the frontend ip configuration
-m, --vm-id [vm-id]                            the VM id.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Compute/virtualMachines/<vm-name>
-a, --vm-name <vm-name>                        the VM name.
This virtual machine must exist in the same resource group as the lb.
Please use vm-id if that is not the case
-s, --subscription <subscription>              the subscription identifier

network lb inbound-nat-rule list [options] <resource-group> <lb-name>

Enumera todas las reglas NAT de entrada para el equilibrador de carga.Lists all inbound nat rules for load balancer.

azure network lb inbound-nat-rule list -g myresourcegroup -l mylb

info:    Executing command network lb inbound-nat-rule list
+ Looking up the load balancer "mylb"
data:    Name          Provisioning state  Protocol  Frontend port  Backend port  Enable floating IP  Idle timeout in minutes  Backend IP configuration
data:    ------------  ------------------  --------  -------------  ------------  ------------------  -----------------------  ---
---------------------
data:    myinboundnat  Succeeded           Tcp       81             8080          false               4

info:    network lb inbound-nat-rule list command OK

Opciones de parámetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-l, --lb-name <lb-name>                the name of the load balancer
-s, --subscription <subscription>      the subscription identifier

network lb inbound-nat-rule delete [options] <resource-group> <lb-name> <name>

Elimina la regla NAT para el equilibrador de carga de un grupo de recursos específico.Deletes NAT rule for the load balancer in a specific resource group.

azure network lb inbound-nat-rule delete -g myresourcegroup -l mylb -n myinboundnat

info:    Executing command network lb inbound-nat-rule delete
+ Looking up the load balancer "mylb"
Delete inbound NAT rule "myinboundnat?" [y/n] y
+ Updating load balancer "mylb"
info:    network lb inbound-nat-rule delete command OK

Opciones de parámetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-l, --lb-name <lb-name>                the name of the load balancer
-n, --name <name>                      the name of the inbound NAT rule
-q, --quiet                            quiet mode, do not ask for delete confirmation
-s, --subscription <subscription>      the subscription identifier

Comandos para administrar direcciones ip públicasCommands to manage public ip addresses

network public-ip create [options] <resource-group> <name> <location>

Crea un recurso de dirección IP pública.Creates a public ip resource. Creará el recurso de dirección ip pública y lo asociará a un nombre de dominio.You will create the public ip resource and associate to a domain name.

azure network public-ip create -g myresourcegroup -n mytestpublicip1 -l eastus -d azureclitest -a "Dynamic"
info:    Executing command network public-ip create
+ Looking up the public ip "mytestpublicip1"
+ Creating public ip address "mytestpublicip1"
+ Looking up the public ip "mytestpublicip1"
data:    Id:                   /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/publicIPAddresses/mytestpublicip1
data:    Name:                 mytestpublicip1
data:    Type:                 Microsoft.Network/publicIPAddresses
data:    Location:             eastus
data:    Provisioning state:   Succeeded
data:    Allocation method:    Dynamic
data:    Idle timeout:         4
data:    Domain name label:    azureclitest
data:    FQDN:                 azureclitest.eastus.cloudapp.azure.com
info:    network public-ip create command OK

Opciones de parámetro:Parameter options:

-h, --help                                   output usage information
-v, --verbose                                use verbose output
--json                                       use json output
-g, --resource-group <resource-group>        the name of the resource group
-n, --name <name>                            the name of the public ip
-l, --location <location>                    the location
-d, --domain-name-label <domain-name-label>  the domain name label.
This set DNS to <domain-name-label>.<location>.cloudapp.azure.com
-a, --allocation-method <allocation-method>  the allocation method [Static][Dynamic]
-i, --idletimeout <idletimeout>              the idle timeout in minutes
-f, --reverse-fqdn <reverse-fqdn>            the reverse fqdn
-t, --tags <tags>                            the list of tags.
Can be multiple. In the format of "name=value".
Name is required and value is optional.
For example, -t tag1=value1;tag2
-s, --subscription <subscription>            the subscription identifier


network public-ip set [options] <resource-group> <name>

Actualiza las propiedades de un recurso de dirección ip pública existente.Updates the properties of an existing public ip resource. En el siguiente ejemplo hemos cambiado la dirección IP pública de dinámica a estática.In the following example we changed the public IP address from Dynamic to Static.

azure network public-ip set -g group-1 -n mytestpublicip1 -d azureclitest -a "Static"
info:    Executing command network public-ip set
+ Looking up the public ip "mytestpublicip1"
+ Updating public ip address "mytestpublicip1"
+ Looking up the public ip "mytestpublicip1"
data:    Id:                   /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/publicIPAddresses/mytestpublicip1
data:    Name:                 mytestpublicip1
data:    Type:                 Microsoft.Network/publicIPAddresses
data:    Location:             eastus
data:    Provisioning state:   Succeeded
data:    Allocation method:    Static
data:    Idle timeout:         4
data:    IP Address:           (static IP address)
data:    Domain name label:    azureclitest
data:    FQDN:                 azureclitest.eastus.cloudapp.azure.com
info:    network public-ip set command OK

Opciones de parámetro:Parameter options:

-h, --help                                   output usage information
-v, --verbose                                use verbose output
--json                                       use json output
-g, --resource-group <resource-group>        the name of the resource group
-n, --name <name>                            the name of the public ip
-d, --domain-name-label [domain-name-label]  the domain name label.
This set DNS to <domain-name-label>.<location>.cloudapp.azure.com
-a, --allocation-method <allocation-method>  the allocation method [Static][Dynamic]
-i, --idletimeout <idletimeout>              the idle timeout in minutes
-f, --reverse-fqdn [reverse-fqdn]            the reverse fqdn
-t, --tags <tags>                            the list of tags.
Can be multiple. In the format of "name=value".
Name is required and value is optional.
For example, -t tag1=value1;tag2
--no-tags                                    remove all existing tags
-s, --subscription <subscription>            the subscription identifier


network public-ip list [options] <resource-group> Enumera todos los recursos IP públicos de un grupo de recursos.network public-ip list [options] Lists all public IP resources within a resource group.

azure network public-ip list -g myresourcegroup

info:    Executing command network public-ip list
+ Getting the public ip addresses
data:    Name             Location  Allocation  IP Address    Idle timeout  DNS Name
data:    ---------------  --------  ----------  ------------  ------------  -------------------------------------------
data:    mypubip5         westus    Dynamic                   4             "domain name".westus.cloudapp.azure.com
data:    myPublicIP       eastus    Dynamic                   4             "domain name".eastus.cloudapp.azure.com
data:    mytestpublicip   eastus    Dynamic                   4             "domain name".eastus.cloudapp.azure.com
data:    mytestpublicip1  eastus   Static (Static IP address) 4             azureclitest.eastus.cloudapp.azure.com

Opciones de parámetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-s, --subscription <subscription>      the subscription identifier


network public-ip show [options] network public-ip show [options]

Muestra las propiedades de la dirección IP pública de un recurso con IP pública dentro de un grupo de recursos.Displays public ip properties for a public ip resource within a resource group.

azure network public-ip show -g myresourcegroup -n mytestpublicip

info:    Executing command network public-ip show
+ Looking up the public ip "mytestpublicip1"
data:    Id:                   /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/publicIPAddresses/mytestpublicip
data:    Name:                 mytestpublicip
data:    Type:                 Microsoft.Network/publicIPAddresses
data:    Location:             eastus
data:    Provisioning state:   Succeeded
data:    Allocation method:    Static
data:    Idle timeout:         4
data:    IP Address:           (static IP address)
data:    Domain name label:    azureclitest
data:    FQDN:                 azureclitest.eastus.cloudapp.azure.com
info:    network public-ip show command OK

Opciones de parámetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-n, --name <name>                      the name of the public IP
-s, --subscription <subscription>      the subscription identifier


network public-ip delete [options] <resource-group> <name>

Elimina un recurso de dirección IP pública.Deletes public ip resource.

azure network public-ip delete -g group-1 -n mypublicipname
info:    Executing command network public-ip delete
+ Looking up the public ip "mypublicipname"
Delete public ip address "mypublicipname"? [y/n] y
+ Deleting public ip address "mypublicipname"
info:    network public-ip delete command OK

Opciones de parámetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-n, --name <name>                      the name of the public IP
-q, --quiet                            quiet mode, do not ask for delete confirmation
-s, --subscription <subscription>      the subscription identifier

Comandos para administrar las interfaces de redCommands to manage network interfaces

network nic create [options] <resource-group> <name> <location>

Crea un recurso denominado interfaz de red (NIC) que puede utilizarse para equilibradores de carga o para asociarlo a una máquina virtual.Creates a resource called network interface (NIC) which can be used for load balancers or associate to a Virtual Machine.

azure network nic create -g myresourcegroup -l eastus -n testnic1 --subnet-name subnet-1 --subnet-vnet-name myvnet

info:    Executing command network nic create
+ Looking up the network interface "testnic1"
+ Looking up the subnet "subnet-1"
+ Creating network interface "testnic1"
+ Looking up the network interface "testnic1"
data:    Id:                     /subscriptions/c4a17ddf-aa84-491c-b6f9-b90d882299f7/resourceGroups/group-1/providers/Microsoft.Network/networkInterfaces/testnic1
data:    Name:                   testnic1
data:    Type:                   Microsoft.Network/networkInterfaces
data:    Location:               eastus
data:    Provisioning state:     Succeeded
data:    IP configurations:
data:       Name:                         NIC-config
data:       Provisioning state:           Succeeded
data:       Private IP address:           10.0.0.5
data:       Private IP Allocation Method: Dynamic
data:       Subnet:                       /subscriptions/c4a17ddf-aa84-491c-b6f9-b90d882299f7/resourceGroups/group-1/providers/Microsoft.Network/virtualNetworks/myVNET/subnets/Subnet-1

Opciones de parámetro:Parameter options:

-h, --help                                                       output usage information
-v, --verbose                                                    use verbose output
--json                                                           use json output
-g, --resource-group <resource-group>                            the name of the resource group
-n, --name <name>                                                the name of the network interface
-l, --location <location>                                        the location
-w, --network-security-group-id <network-security-group-id>      the network security group identifier.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/networkSecurityGroups/<nsg-name>
-o, --network-security-group-name <network-security-group-name>  the network security group name.
This network security group must exist in the same resource group as the nic.
Please use network-security-group-id if that is not the case.
-i, --public-ip-id <public-ip-id>                                the public IP identifier.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/publicIPAddresses/<public-ip-name>
-p, --public-ip-name <public-ip-name>                            the public IP name.
This public ip must exist in the same resource group as the nic.
Please use public-ip-id if that is not the case.
-a, --private-ip-address <private-ip-address>                    the private IP address
-u, --subnet-id <subnet-id>                                      the subnet identifier.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/virtualNetworks/<vnet-name>/subnets/<subnet-name>
--subnet-name <subnet-name>                                  the subnet name
-m, --subnet-vnet-name <subnet-vnet-name>                        the vnet name under which subnet-name exists
-t, --tags <tags>                                                the comma seperated list of tags.
Can be multiple. In the format of "name=value".
Name is required and value is optional.
For example, -t tag1=value1;tag2
-s, --subscription <subscription>                                the subscription identifier
data:
info:    network nic create command OK

network nic set [options] <resource-group> <name>

network nic list [options] <resource-group>
network nic show [options] <resource-group> <name>
network nic delete [options] <resource-group> <name>

Comandos para administrar grupos de seguridad de redCommands to manage network security groups

network nsg create [options] <resource-group> <name> <location>
network nsg set [options] <resource-group> <name>
network nsg list [options] <resource-group>
network nsg show [options] <resource-group> <name>
network nsg delete [options] <resource-group> <name>

Comandos para administrar reglas de grupos de seguridad de redCommands to manage network security group rules

network nsg rule create [options] <resource-group> <nsg-name> <name>
network nsg rule set [options] <resource-group> <nsg-name> <name>
network nsg rule list [options] <resource-group> <nsg-name>
network nsg rule show [options] <resource-group> <nsg-name> <name>
network nsg rule delete [options] <resource-group> <nsg-name> <name>

Comandos para administrar perfiles del Administrador de tráficoCommands to manage traffic manager profile

network traffic-manager profile create [options] <resource-group> <name>
network traffic-manager profile set [options] <resource-group> <name>
network traffic-manager profile list [options] <resource-group>
network traffic-manager profile show [options] <resource-group> <name>
network traffic-manager profile delete [options] <resource-group> <name>
network traffic-manager profile is-dns-available [options] <resource-group> <relative-dns-name>

Comandos para administrar extremos del Administrador de tráficoCommands to manage traffic manager endpoints

network traffic-manager profile endpoint create [options] <resource-group> <profile-name> <name> <endpoint-location>
network traffic-manager profile endpoint set [options] <resource-group> <profile-name> <name>
network traffic-manager profile endpoint delete [options] <resource-group> <profile-name> <name>

Comandos para administrar puertas de enlace de redes virtualesCommands to manage virtual network gateways

network gateway list [options] <resource-group>

azure provider: comandos para administrar los registros de proveedor de recursosazure provider: Commands to manage resource provider registrations

Enumerar los proveedores registrados actualmente en Resource ManagerList currently registered providers in Resource Manager

provider list [options]

Mostrar detalles sobre el espacio de nombres de proveedor solicitadoShow details about the requested provider namespace

provider show [options] <namespace>

Registrar el proveedor con la suscripciónRegister provider with the subscription

provider register [options] <namespace>

Anular el registro del proveedor con la suscripciónUnregister provider with the subscription

provider unregister [options] <namespace>

azure resource: comandos para administrar los recursosazure resource: Commands to manage your resources

Crea un recurso en un grupo de recursos.Creates a resource in a resource group

resource create [options] <resource-group> <name> <resource-type> <location> <api-version>

Actualiza un recurso en un grupo de recursos sin parámetros ni plantillas.Updates a resource in a resource group without any templates or parameters

resource set [options] <resource-group> <name> <resource-type> <properties> <api-version>

Enumera los recursos.Lists the resources

resource list [options] [resource-group]

Obtiene un recurso dentro de un grupo de recursos o la suscripción.Gets one resource within a resource group or subscription

resource show [options] <resource-group> <name> <resource-type> <api-version>

Elimina un recurso en un grupo de recursos.Deletes a resource in a resource group

resource delete [options] <resource-group> <name> <resource-type> <api-version>

azure role: comandos para administrar roles de Azureazure role: Commands to manage your Azure roles

Obtener todas las definiciones de rol disponiblesGet all available role definitions

role list [options]

Obtener una definición de rol disponibleGet an available role definition

role show [options] [name]

Comandos para administrar la asignación de su rolCommands to manage your role assignment

role assignment create [options] [objectId] [upn] [mail] [spn] [role] [scope] [resource-group] [resource-type] [resource-name]
role assignment list [options] [objectId] [upn] [mail] [spn] [role] [scope] [resource-group] [resource-type] [resource-name]
role assignment delete [options] [objectId] [upn] [mail] [spn] [role] [scope] [resource-group] [resource-type] [resource-name]

azure storage: comandos para administrar los objetos de Almacenamientoazure storage: Commands to manage your Storage objects

Comandos para administrar cuentas de AlmacenamientoCommands to manage your Storage accounts

storage account list [options]
storage account show [options] <name>
storage account create [options] <name>
storage account set [options] <name>
storage account delete [options] <name>

Comandos para administrar claves de cuentas de AlmacenamientoCommands to manage your Storage account keys

storage account keys list [options] <name>
storage account keys renew [options] <name>

Comandos para mostrar la cadena de conexión de AlmacenamientoCommands to show your Storage connection string

storage account connectionstring show [options] <name>

Comandos para administrar contenedores de AlmacenamientoCommands to manage your Storage containers

storage container list [options] [prefix]
storage container show [options] [container]
storage container create [options] [container]
storage container delete [options] [container]
storage container set [options] [container]

Comandos para administrar firmas de acceso compartido de su contenedor de almacenamientoCommands to manage shared access signatures of your Storage container

storage container sas create [options] [container] [permissions] [expiry]

Comandos para administrar políticas de acceso compartido de su contenedor de AlmacenamientoCommands to manage stored access policies of your Storage container

storage container policy create [options] [container] [name]
storage container policy show [options] [container] [name]
storage container policy list [options] [container]
storage container policy set [options] [container] [name]
storage container policy delete [options] [container] [name]

Comandos para administrar blobs de AlmacenamientoCommands to manage your Storage blobs

storage blob list [options] [container] [prefix]
storage blob show [options] [container] [blob]
storage blob delete [options] [container] [blob]
storage blob upload [options] [file] [container] [blob]
storage blob download [options] [container] [blob] [destination]

Comandos para administrar sus operaciones de copia de blobsCommands to manage your blob copy operations

storage blob copy start [options] [sourceUri] [destContainer]
storage blob copy show [options] [container] [blob]
storage blob copy stop [options] [container] [blob] [copyid]

Comandos para administrar la firma de acceso compartido de su blob de AlmacenamientoCommands to manage shared access signature of your Storage blob

storage blob sas create [options] [container] [blob] [permissions] [expiry]

Comandos para administrar sus archivos compartidos de AlmacenamientoCommands to manage your Storage file shares

storage share create [options] [share]
storage share show [options] [share]
storage share delete [options] [share]
storage share list [options] [prefix]

Comandos para administrar sus archivos de AlmacenamientoCommands to manage your Storage files

storage file list [options] [share] [path]
storage file delete [options] [share] [path]
storage file upload [options] [source] [share] [path]
storage file download [options] [share] [path] [destination]

Comandos para administrar su directorio de archivos de AlmacenamientoCommands to manage your Storage file directory

storage directory create [options] [share] [path]
storage directory delete [options] [share] [path]

Comandos para administrar sus colas de AlmacenamientoCommands to manage your Storage queues

storage queue create [options] [queue]
storage queue list [options] [prefix]
storage queue show [options] [queue]
storage queue delete [options] [queue]

Comandos para administrar firmas de acceso compartido de su cola de AlmacenamientoCommands to manage shared access signatures of your Storage queue

storage queue sas create [options] [queue] [permissions] [expiry]

Comandos para administrar políticas de acceso compartido de su cola de AlmacenamientoCommands to manage stored access policies of your Storage queue

storage queue policy create [options] [queue] [name]
storage queue policy show [options] [queue] [name]
storage queue policy list [options] [queue]
storage queue policy set [options] [queue] [name]
storage queue policy delete [options] [queue] [name]

Comandos para administrar propiedades de registro de AlmacenamientoCommands to manage your Storage logging properties

storage logging show [options]
storage logging set [options]

Comandos para administrar propiedades de métricas de AlmacenamientoCommands to manage your Storage metrics properties

storage metrics show [options]
storage metrics set [options]

Comandos para administrar tablas de AlmacenamientoCommands to manage your Storage tables

storage table create [options] [table]
storage table list [options] [prefix]
storage table show [options] [table]
storage table delete [options] [table]

Comandos para administrar firmas de acceso compartido de su tabla de AlmacenamientoCommands to manage shared access signatures of your Storage table

storage table sas create [options] [table] [permissions] [expiry]

Comandos para administrar políticas de acceso compartido de su tabla de AlmacenamientoCommands to manage stored access policies of your Storage table

storage table policy create [options] [table] [name]
storage table policy show [options] [table] [name]
storage table policy list [options] [table]
storage table policy set [options] [table] [name]
storage table policy delete [options] [table] [name]

azure tag: comandos para administrar etiquetas del administrador de recursosazure tag: Commands to manage your resource manager tag

Agregar una etiquetaAdd a tag

tag create [options] <name> <value>

Quitar una etiqueta o un valor de etiquetaRemove an entire tag or a tag value

tag delete [options] <name> <value>

Enumerar la información de la etiquetaLists the tag information

tag list [options]

Obtener una etiquetaGet a tag

tag show [options] [name]

azure vm: comandos para administrar máquinas virtuales de Azureazure vm: Commands to manage your Azure Virtual Machines

Crear una máquina virtualCreate a VM

vm create [options] <resource-group> <name> <location> <os-type>

Crear una máquina virtual con los recursos predeterminadosCreate a VM with default resources

vm quick-create [options] <resource-group> <name> <location> <os-type> <image-urn> <admin-username> <admin-password

Sugerencia

A partir de CLI versión 0.10, puede proporcionar un alias corto como UbuntuLTS o Win2012R2Datacenter como image-urn para algunas imágenes populares de Marketplace.Starting with CLI version 0.10, you can provide a short alias such as "UbuntuLTS" or "Win2012R2Datacenter" as the image-urn for some popular Marketplace images. Ejecute azure help vm quick-create para ver las opciones.Run azure help vm quick-create for options. Además, desde la versión 0.10, azure vm quick-create utiliza Almacenamiento premium de forma predeterminada, si está disponible en la región seleccionada.Additionally, starting with version 0.10, azure vm quick-create uses premium storage by default if it's available in the selected region.

Mostrar las máquinas virtuales dentro de una cuentaList the virtual machines within an account

vm list [options]

Obtener una máquina virtual en un grupo de recursosGet one virtual machine within a resource group

vm show [options] <resource-group> <name>

Eliminar una máquina virtual en un grupo de recursosDelete one virtual machine within a resource group

vm delete [options] <resource-group> <name>

Cerrar una máquina virtual en un grupo de recursosShutdown one virtual machine within a resource group

vm stop [options] <resource-group> <name>

Reiniciar una máquina virtual en un grupo de recursosRestart one virtual machine within a resource group

vm restart [options] <resource-group> <name>

Iniciar una máquina virtual en un grupo de recursosStart one virtual machine within a resource group

vm start [options] <resource-group> <name>

Cerrar una máquina virtual en un grupo de recursos y liberar recursos de procesoShutdown one virtual machine within a resource group and releases the compute resources

vm deallocate [options] <resource-group> <name>

Enumerar los tamaños disponibles de máquina virtualList available virtual machine sizes

vm sizes [options]

Capturar la máquina virtual como imagen del sistema operativo o como imagen de VMCapture the VM as OS Image or VM Image

vm capture [options] <resource-group> <name> <vhd-name-prefix>

Establecer el estado de la máquina virtual como GeneralizedSet the state of the VM to Generalized

vm generalize [options] <resource-group> <name>

Obtener la vista de instancia de la máquina virtualGet instance view of the VM

vm get-instance-view [options] <resource-group> <name>

Restablecer la configuración de acceso de escritorio remoto o SSH en una máquina virtual y restablecer la contraseña para la cuenta que tiene como administrador o autoridad sudoEnable you to reset Remote Desktop Access or SSH settings on a Virtual Machine and to reset the password for the account that has administrator or sudo authority

vm reset-access [options] <resource-group> <name>

Actualizar la máquina virtual con nuevos datosUpdate VM with new data

vm set [options] <resource-group> <name>

Comandos para administrar discos de datos de máquinas virtualesCommands to manage your Virtual Machine data disks

vm disk attach-new [options] <resource-group> <vm-name> <size-in-gb> [vhd-name]
vm disk detach [options] <resource-group> <vm-name> <lun>
vm disk attach [options] <resource-group> <vm-name> [vhd-url]

Comandos para administrar las extensiones de recursos de máquina virtualCommands to manage VM resource extensions

vm extension set [options] <resource-group> <vm-name> <name> <publisher-name> <version>
vm extension get [options] <resource-group> <vm-name>

Comandos para administrar sus máquinas virtuales DockerCommands to manage your Docker Virtual Machine

vm docker create [options] <resource-group> <name> <location> <os-type>

Comandos para administrar imágenes de máquina virtualCommands to manage VM images

vm image list-publishers [options] <location>
vm image list-offers [options] <location> <publisher>
vm image list-skus [options] <location> <publisher> <offer>
vm image list [options] <location> <publisher> [offer] [sku]