Console.WindowTop Console.WindowTop Console.WindowTop Console.WindowTop Property

Definición

Obtiene o establece la posición superior del área de la ventana de la consola con respecto al búfer de pantalla.Gets or sets the top position of the console window area relative to the screen buffer.

public:
 static property int WindowTop { int get(); void set(int value); };
public static int WindowTop { get; set; }
member this.WindowTop : int with get, set
Public Shared Property WindowTop As Integer

Valor de propiedad

Posición superior de la ventana de la consola, medida en filas.The uppermost console window position measured in rows.

Excepciones

En una operación set, el valor que se asigna es menor que cero.In a set operation, the value to be assigned is less than zero.

o bien-or- Como resultado de la asignación, WindowTop más WindowHeight superaría BufferHeight.As a result of the assignment, WindowTop plus WindowHeight would exceed BufferHeight.

Error al leer o escribir información.Error reading or writing information.

Se invoca la operación Set en un sistema operativo distinto de Windows.The set operation is invoked on an operating system other than Windows.

Ejemplos

En el ejemplo siguiente se WindowLeftmuestran WindowToplas propiedades WindowHeight, BufferWidth, BufferHeight CursorVisible SetWindowPosition,,, y; y, SetBufferSize yReadKey WindowWidth modalidades.The following example demonstrates the WindowLeft, WindowTop, WindowWidth, WindowHeight, BufferWidth, BufferHeight, and CursorVisible properties; and the SetWindowPosition, SetBufferSize, and ReadKey methods. En el ejemplo se dibuja un patrón de cuadrícula en el búfer de pantalla basándose en el ancho del búfer de pantalla.The example draws a grid pattern in the screen buffer based on the screen buffer width. Después, el ejemplo mueve la ventana de la consola en respuesta a la flecha arriba, flecha abajo, flecha izquierda o teclas de la consola de la flecha derecha.Then the example moves the console window in response to which of the UP ARROW, DOWN ARROW, LEFT ARROW, or RIGHT ARROW console keys is pressed. El patrón de cuadrícula le ayuda a ver el movimiento de la ventana de la consola con respecto al búfer de pantalla.The grid pattern helps you see the movement of the console window relative to the screen buffer.

// This example demonstrates the Console.WindowLeft and
//                               Console.WindowTop properties.
using namespace System;
using namespace System::Text;
using namespace System::IO;

//
int saveBufferWidth;
int saveBufferHeight;
int saveWindowHeight;
int saveWindowWidth;
bool saveCursorVisible;

//
int main()
{
   String^ m1 = "1) Press the cursor keys to move the console window.\n"
   "2) Press any key to begin. When you're finished...\n"
   "3) Press the Escape key to quit.";
   String^ g1 = "+----";
   String^ g2 = "|    ";
   String^ grid1;
   String^ grid2;
   StringBuilder^ sbG1 = gcnew StringBuilder;
   StringBuilder^ sbG2 = gcnew StringBuilder;
   ConsoleKeyInfo cki;
   int y;
   
   //
   try
   {
      saveBufferWidth = Console::BufferWidth;
      saveBufferHeight = Console::BufferHeight;
      saveWindowHeight = Console::WindowHeight;
      saveWindowWidth = Console::WindowWidth;
      saveCursorVisible = Console::CursorVisible;
      
      //
      Console::Clear();
      Console::WriteLine( m1 );
      Console::ReadKey( true );
      
      // Set the smallest possible window size before setting the buffer size.
      Console::SetWindowSize( 1, 1 );
      Console::SetBufferSize( 80, 80 );
      Console::SetWindowSize( 40, 20 );
      
      // Create grid lines to fit the buffer. (The buffer width is 80, but
      // this same technique could be used with an arbitrary buffer width.)
      for ( y = 0; y < Console::BufferWidth / g1->Length; y++ )
      {
         sbG1->Append( g1 );
         sbG2->Append( g2 );

      }
      sbG1->Append( g1, 0, Console::BufferWidth % g1->Length );
      sbG2->Append( g2, 0, Console::BufferWidth % g2->Length );
      grid1 = sbG1->ToString();
      grid2 = sbG2->ToString();
      Console::CursorVisible = false;
      Console::Clear();
      for ( y = 0; y < Console::BufferHeight - 1; y++ )
      {
         if ( y % 3 == 0 )
                  Console::Write( grid1 );
         else
                  Console::Write( grid2 );

      }
      Console::SetWindowPosition( 0, 0 );
      do
      {
         cki = Console::ReadKey( true );
         switch ( cki.Key )
         {
            case ConsoleKey::LeftArrow:
               if ( Console::WindowLeft > 0 )
                              Console::SetWindowPosition( Console::WindowLeft - 1, Console::WindowTop );
               break;

            case ConsoleKey::UpArrow:
               if ( Console::WindowTop > 0 )
                              Console::SetWindowPosition( Console::WindowLeft, Console::WindowTop - 1 );
               break;

            case ConsoleKey::RightArrow:
               if ( Console::WindowLeft < (Console::BufferWidth - Console::WindowWidth) )
                              Console::SetWindowPosition( Console::WindowLeft + 1, Console::WindowTop );
               break;

            case ConsoleKey::DownArrow:
               if ( Console::WindowTop < (Console::BufferHeight - Console::WindowHeight) )
                              Console::SetWindowPosition( Console::WindowLeft, Console::WindowTop + 1 );
               break;
         }
      }
      while ( cki.Key != ConsoleKey::Escape );
   }
   catch ( IOException^ e ) 
   {
      Console::WriteLine( e->Message );
   }
   finally
   {
      Console::Clear();
      Console::SetWindowSize( 1, 1 );
      Console::SetBufferSize( saveBufferWidth, saveBufferHeight );
      Console::SetWindowSize( saveWindowWidth, saveWindowHeight );
      Console::CursorVisible = saveCursorVisible;
   }

} // end Main


/*
This example produces results similar to the following:

1) Press the cursor keys to move the console window.
2) Press any key to begin. When you're finished...
3) Press the Escape key to quit.

...

+----+----+----+-
|    |    |    |
|    |    |    |
+----+----+----+-
|    |    |    |
|    |    |    |
+----+----+----+-

*/
// This example demonstrates the Console.WindowLeft and
//                               Console.WindowTop properties.
using System;
using System.Text;
using System.IO;
//
class Sample 
{
    public static int saveBufferWidth;
    public static int saveBufferHeight;
    public static int saveWindowHeight;
    public static int saveWindowWidth;
    public static bool saveCursorVisible;
//
    public static void Main() 
    {
    string m1 = "1) Press the cursor keys to move the console window.\n" +
                "2) Press any key to begin. When you're finished...\n" +
                "3) Press the Escape key to quit.";
    string g1 = "+----";
    string g2 = "|    ";
    string grid1;
    string grid2;
    StringBuilder sbG1 = new StringBuilder();
    StringBuilder sbG2 = new StringBuilder();
    ConsoleKeyInfo cki;
    int y;
//
    try 
    {
    saveBufferWidth  = Console.BufferWidth;
    saveBufferHeight = Console.BufferHeight;
    saveWindowHeight = Console.WindowHeight;
    saveWindowWidth  = Console.WindowWidth;
    saveCursorVisible = Console.CursorVisible;
//
    Console.Clear();
    Console.WriteLine(m1);
    Console.ReadKey(true);

// Set the smallest possible window size before setting the buffer size.
    Console.SetWindowSize(1, 1);
    Console.SetBufferSize(80, 80);
    Console.SetWindowSize(40, 20);

// Create grid lines to fit the buffer. (The buffer width is 80, but
// this same technique could be used with an arbitrary buffer width.)
    for (y = 0; y < Console.BufferWidth/g1.Length; y++)
        {
        sbG1.Append(g1);
        sbG2.Append(g2);
        }
    sbG1.Append(g1, 0, Console.BufferWidth%g1.Length);
    sbG2.Append(g2, 0, Console.BufferWidth%g2.Length);
    grid1 = sbG1.ToString();
    grid2 = sbG2.ToString();

    Console.CursorVisible = false;
    Console.Clear();
    for (y = 0; y < Console.BufferHeight-1; y++)
        {
        if (y%3 == 0)
            Console.Write(grid1);
        else
            Console.Write(grid2);
        }

    Console.SetWindowPosition(0, 0);
    do
        {
        cki = Console.ReadKey(true);
        switch (cki.Key) 
            {
            case ConsoleKey.LeftArrow:
                if (Console.WindowLeft > 0) 
                    Console.SetWindowPosition(
                            Console.WindowLeft-1, Console.WindowTop);
                break;
            case ConsoleKey.UpArrow:
                if (Console.WindowTop > 0) 
                    Console.SetWindowPosition(
                            Console.WindowLeft, Console.WindowTop-1);
                break;
            case ConsoleKey.RightArrow:
                if (Console.WindowLeft < (Console.BufferWidth-Console.WindowWidth)) 
                    Console.SetWindowPosition(
                            Console.WindowLeft+1, Console.WindowTop);
                break;
            case ConsoleKey.DownArrow:
                if (Console.WindowTop < (Console.BufferHeight-Console.WindowHeight)) 
                    Console.SetWindowPosition(
                            Console.WindowLeft, Console.WindowTop+1);
                break;
            }
        } 
    while (cki.Key != ConsoleKey.Escape);  // end do-while
    } // end try
    catch (IOException e) 
        {
        Console.WriteLine(e.Message);
        }
    finally 
        {
        Console.Clear();
        Console.SetWindowSize(1, 1);
        Console.SetBufferSize(saveBufferWidth, saveBufferHeight);
        Console.SetWindowSize(saveWindowWidth, saveWindowHeight);
        Console.CursorVisible = saveCursorVisible;
        }
    } // end Main
} // end Sample
/*
This example produces results similar to the following:

1) Press the cursor keys to move the console window.
2) Press any key to begin. When you're finished...
3) Press the Escape key to quit.

...

+----+----+----+-
|    |    |    |
|    |    |    |
+----+----+----+-
|    |    |    |
|    |    |    |
+----+----+----+-

*/
' This example demonstrates the Console.WindowLeft and
'                               Console.WindowTop properties.
Imports System.IO
Imports System.Text

Class Sample
   Public Shared saveBufferWidth As Integer
   Public Shared saveBufferHeight As Integer
   Public Shared saveWindowHeight As Integer
   Public Shared saveWindowWidth As Integer
   Public Shared saveCursorVisible As Boolean
   
   Public Shared Sub Main()
      Dim m1 As String = _
          "1) Press the cursor keys to move the console window." & vbCrlf & _
          "2) Press any key to begin. When you're finished..."   & vbCrlf & _
          "3) Press the Escape key to quit."
      Dim g1 As String = "+----"
      Dim g2 As String = "|    "
      Dim grid1 As String
      Dim grid2 As String
      Dim sbG1 As New StringBuilder()
      Dim sbG2 As New StringBuilder()
      Dim cki As ConsoleKeyInfo
      Dim y As Integer
      '
      Try
         saveBufferWidth = Console.BufferWidth
         saveBufferHeight = Console.BufferHeight
         saveWindowHeight = Console.WindowHeight
         saveWindowWidth = Console.WindowWidth
         saveCursorVisible = Console.CursorVisible
         '
         Console.Clear()
         Console.WriteLine(m1)
         Console.ReadKey(True)
         
         ' Set the smallest possible window size before setting the buffer size.
         Console.SetWindowSize(1, 1)
         Console.SetBufferSize(80, 80)
         Console.SetWindowSize(40, 20)
         
         ' Create grid lines to fit the buffer. (The buffer width is 80, but
         ' this same technique could be used with an arbitrary buffer width.)
         For y = 0 To (Console.BufferWidth / g1.Length) - 1
            sbG1.Append(g1)
            sbG2.Append(g2)
         Next y
         sbG1.Append(g1, 0, Console.BufferWidth Mod g1.Length)
         sbG2.Append(g2, 0, Console.BufferWidth Mod g2.Length)
         grid1 = sbG1.ToString()
         grid2 = sbG2.ToString()
         
         Console.CursorVisible = False
         Console.Clear()
         For y = 0 To (Console.BufferHeight - 2)
            If y Mod 3 = 0 Then
               Console.Write(grid1)
            Else
               Console.Write(grid2)
            End If
         Next y 
         '
         Console.SetWindowPosition(0, 0)
         Do
            cki = Console.ReadKey(True)
            Select Case cki.Key
               Case ConsoleKey.LeftArrow
                  If Console.WindowLeft > 0 Then
                     Console.SetWindowPosition(Console.WindowLeft - 1, Console.WindowTop)
                  End If
               Case ConsoleKey.UpArrow
                  If Console.WindowTop > 0 Then
                     Console.SetWindowPosition(Console.WindowLeft, Console.WindowTop - 1)
                  End If
               Case ConsoleKey.RightArrow
                  If Console.WindowLeft < Console.BufferWidth - Console.WindowWidth Then
                     Console.SetWindowPosition(Console.WindowLeft + 1, Console.WindowTop)
                  End If
               Case ConsoleKey.DownArrow
                  If Console.WindowTop < Console.BufferHeight - Console.WindowHeight Then
                     Console.SetWindowPosition(Console.WindowLeft, Console.WindowTop + 1)
                  End If
            End Select
         Loop While cki.Key <> ConsoleKey.Escape
      ' end do-while
      ' end try
      Catch e As IOException
         Console.WriteLine(e.Message)
      Finally
         Console.Clear()
         Console.SetWindowSize(1, 1)
         Console.SetBufferSize(saveBufferWidth, saveBufferHeight)
         Console.SetWindowSize(saveWindowWidth, saveWindowHeight)
         Console.CursorVisible = saveCursorVisible
      End Try
   End Sub 'Main ' end Main
End Class 'Sample ' end Sample
'
'This example produces results similar to the following:
'
'1) Press the cursor keys to move the console window.
'2) Press any key to begin. When you're finished...
'3) Press the Escape key to quit.
'
'...
'
'+----+----+----+-
'|    |    |    |
'|    |    |    |
'+----+----+----+-
'|    |    |    |
'|    |    |    |
'+----+----+----+-
'

Comentarios

La consola representa una ventana rectangular en un área de búfer rectangular más grande.The console represents a rectangular window into a larger rectangular buffer area. Tanto la ventana como el búfer se miden verticalmente por su número de filas y horizontalmente por el número de columnas.Both the window and the buffer are measured vertically by their number of rows and horizontally by their number of columns. Las dimensiones del área de búfer se definen mediante las BufferHeight propiedades BufferWidth y.The dimensions of the buffer area are defined by the BufferHeight and BufferWidth properties. Las dimensiones del área de la consola están definidas por WindowHeight las WindowWidth propiedades y.The dimensions of the console area are defined by the WindowHeight and WindowWidth properties. La WindowTop propiedad determina qué fila del área del búfer se muestra en la primera columna de la ventana de la consola.The WindowTop property determines which row of the buffer area is displayed in the first column of the console window. El valor de la WindowTop propiedad puede oscilar entre 0 BufferHeighty - . WindowHeightThe value of the WindowTop property can range from 0 to BufferHeight - WindowHeight. Al intentar establecerlo en un valor fuera de ese intervalo, se produce ArgumentOutOfRangeExceptionuna excepción.Attempting to set it to a value outside that range throws an ArgumentOutOfRangeException.

Al intentar establecer el valor de la WindowTop propiedad cuando la salida se redirige, se produce una IOException excepción.Attempting to set the value of the WindowTop property when output is redirected throws an IOException exception. Para evitar la excepción, puede establecer el valor de esta propiedad solo si la IsOutputRedirected propiedad devuelve. falseTo prevent the exception, you can set the value of this property only if the IsOutputRedirected property returns false.

Se aplica a