PrintQueue.QueueStatus Propiedad

Definición

Espacio de nombres:

System.Printing

Ensamblado:

System.Printing.dll

Obtiene un valor que representa el estado de la impresora. Entre los valores se incluyen "preparando", "inicializando", "imprimiendo", etc.

public:
 property System::Printing::PrintQueueStatus QueueStatus { System::Printing::PrintQueueStatus get(); };

public System.Printing.PrintQueueStatus QueueStatus { get; }

member this.QueueStatus : System.Printing.PrintQueueStatus

Public ReadOnly Property QueueStatus As PrintQueueStatus

Valor de propiedad

PrintQueueStatus

El valor de PrintQueueStatus actual.

Ejemplos

En el ejemplo siguiente se muestra cómo usar esta propiedad como parte de una encuesta a todas las impresoras para ver el posible estado de error.

internal: 
   // Check for possible trouble states of a printer using the flags of the QueueStatus property
   static void SpotTroubleUsingQueueAttributes (System::String^% statusReport, System::Printing::PrintQueue^ pq) 
   {
      if ((pq->QueueStatus & PrintQueueStatus::PaperProblem) == PrintQueueStatus::PaperProblem)
      {
         statusReport = statusReport + "Has a paper problem. ";
      }
      if ((pq->QueueStatus & PrintQueueStatus::NoToner) == PrintQueueStatus::NoToner)
      {
         statusReport = statusReport + "Is out of toner. ";
      }
      if ((pq->QueueStatus & PrintQueueStatus::DoorOpen) == PrintQueueStatus::DoorOpen)
      {
         statusReport = statusReport + "Has an open door. ";
      }
      if ((pq->QueueStatus & PrintQueueStatus::Error) == PrintQueueStatus::Error)
      {
         statusReport = statusReport + "Is in an error state. ";
      }
      if ((pq->QueueStatus & PrintQueueStatus::NotAvailable) == PrintQueueStatus::NotAvailable)
      {
         statusReport = statusReport + "Is not available. ";
      }
      if ((pq->QueueStatus & PrintQueueStatus::Offline) == PrintQueueStatus::Offline)
      {
         statusReport = statusReport + "Is off line. ";
      }
      if ((pq->QueueStatus & PrintQueueStatus::OutOfMemory) == PrintQueueStatus::OutOfMemory)
      {
         statusReport = statusReport + "Is out of memory. ";
      }
      if ((pq->QueueStatus & PrintQueueStatus::PaperOut) == PrintQueueStatus::PaperOut)
      {
         statusReport = statusReport + "Is out of paper. ";
      }
      if ((pq->QueueStatus & PrintQueueStatus::OutputBinFull) == PrintQueueStatus::OutputBinFull)
      {
         statusReport = statusReport + "Has a full output bin. ";
      }
      if ((pq->QueueStatus & PrintQueueStatus::PaperJam) == PrintQueueStatus::PaperJam)
      {
         statusReport = statusReport + "Has a paper jam. ";
      }
      if ((pq->QueueStatus & PrintQueueStatus::Paused) == PrintQueueStatus::Paused)
      {
         statusReport = statusReport + "Is paused. ";
      }
      if ((pq->QueueStatus & PrintQueueStatus::TonerLow) == PrintQueueStatus::TonerLow)
      {
         statusReport = statusReport + "Is low on toner. ";
      }
      if ((pq->QueueStatus & PrintQueueStatus::UserIntervention) == PrintQueueStatus::UserIntervention)
      {
         statusReport = statusReport + "Needs user intervention. ";
      }

      // Check if queue is even available at this time of day
      // The method below is defined in the complete example.
      ReportAvailabilityAtThisTime(statusReport, pq);
   };

// Check for possible trouble states of a printer using the flags of the QueueStatus property
internal static void SpotTroubleUsingQueueAttributes(ref String statusReport, PrintQueue pq)
{
    if ((pq.QueueStatus & PrintQueueStatus.PaperProblem) == PrintQueueStatus.PaperProblem)
    {
        statusReport = statusReport + "Has a paper problem. ";
    }
    if ((pq.QueueStatus & PrintQueueStatus.NoToner) == PrintQueueStatus.NoToner)
    {
        statusReport = statusReport + "Is out of toner. ";
    }
    if ((pq.QueueStatus & PrintQueueStatus.DoorOpen) == PrintQueueStatus.DoorOpen)
    {
        statusReport = statusReport + "Has an open door. ";
    }
    if ((pq.QueueStatus & PrintQueueStatus.Error) == PrintQueueStatus.Error)
    {
        statusReport = statusReport + "Is in an error state. ";
    }
    if ((pq.QueueStatus & PrintQueueStatus.NotAvailable) == PrintQueueStatus.NotAvailable)
    {
        statusReport = statusReport + "Is not available. ";
    }
    if ((pq.QueueStatus & PrintQueueStatus.Offline) == PrintQueueStatus.Offline)
    {
        statusReport = statusReport + "Is off line. ";
    }
    if ((pq.QueueStatus & PrintQueueStatus.OutOfMemory) == PrintQueueStatus.OutOfMemory)
    {
        statusReport = statusReport + "Is out of memory. ";
    }
    if ((pq.QueueStatus & PrintQueueStatus.PaperOut) == PrintQueueStatus.PaperOut)
    {
        statusReport = statusReport + "Is out of paper. ";
    }
    if ((pq.QueueStatus & PrintQueueStatus.OutputBinFull) == PrintQueueStatus.OutputBinFull)
    {
        statusReport = statusReport + "Has a full output bin. ";
    }
    if ((pq.QueueStatus & PrintQueueStatus.PaperJam) == PrintQueueStatus.PaperJam)
    {
        statusReport = statusReport + "Has a paper jam. ";
    }
    if ((pq.QueueStatus & PrintQueueStatus.Paused) == PrintQueueStatus.Paused)
    {
        statusReport = statusReport + "Is paused. ";
    }
    if ((pq.QueueStatus & PrintQueueStatus.TonerLow) == PrintQueueStatus.TonerLow)
    {
        statusReport = statusReport + "Is low on toner. ";
    }
    if ((pq.QueueStatus & PrintQueueStatus.UserIntervention) == PrintQueueStatus.UserIntervention)
    {
        statusReport = statusReport + "Needs user intervention. ";
    }

    // Check if queue is even available at this time of day
    // The method below is defined in the complete example.
    ReportAvailabilityAtThisTime(ref statusReport, pq);
}

' Check for possible trouble states of a printer using the flags of the QueueStatus property
Friend Shared Sub SpotTroubleUsingQueueAttributes(ByRef statusReport As String, ByVal pq As PrintQueue)
    If (pq.QueueStatus And PrintQueueStatus.PaperProblem) = PrintQueueStatus.PaperProblem Then
        statusReport = statusReport & "Has a paper problem. "
    End If
    If (pq.QueueStatus And PrintQueueStatus.NoToner) = PrintQueueStatus.NoToner Then
        statusReport = statusReport & "Is out of toner. "
    End If
    If (pq.QueueStatus And PrintQueueStatus.DoorOpen) = PrintQueueStatus.DoorOpen Then
        statusReport = statusReport & "Has an open door. "
    End If
    If (pq.QueueStatus And PrintQueueStatus.Error) = PrintQueueStatus.Error Then
        statusReport = statusReport & "Is in an error state. "
    End If
    If (pq.QueueStatus And PrintQueueStatus.NotAvailable) = PrintQueueStatus.NotAvailable Then
        statusReport = statusReport & "Is not available. "
    End If
    If (pq.QueueStatus And PrintQueueStatus.Offline) = PrintQueueStatus.Offline Then
        statusReport = statusReport & "Is off line. "
    End If
    If (pq.QueueStatus And PrintQueueStatus.OutOfMemory) = PrintQueueStatus.OutOfMemory Then
        statusReport = statusReport & "Is out of memory. "
    End If
    If (pq.QueueStatus And PrintQueueStatus.PaperOut) = PrintQueueStatus.PaperOut Then
        statusReport = statusReport & "Is out of paper. "
    End If
    If (pq.QueueStatus And PrintQueueStatus.OutputBinFull) = PrintQueueStatus.OutputBinFull Then
        statusReport = statusReport & "Has a full output bin. "
    End If
    If (pq.QueueStatus And PrintQueueStatus.PaperJam) = PrintQueueStatus.PaperJam Then
        statusReport = statusReport & "Has a paper jam. "
    End If
    If (pq.QueueStatus And PrintQueueStatus.Paused) = PrintQueueStatus.Paused Then
        statusReport = statusReport & "Is paused. "
    End If
    If (pq.QueueStatus And PrintQueueStatus.TonerLow) = PrintQueueStatus.TonerLow Then
        statusReport = statusReport & "Is low on toner. "
    End If
    If (pq.QueueStatus And PrintQueueStatus.UserIntervention) = PrintQueueStatus.UserIntervention Then
        statusReport = statusReport & "Needs user intervention. "
    End If

    ' Check if queue is even available at this time of day
    ' The method below is defined in the complete example.
    ReportAvailabilityAtThisTime(statusReport, pq)
End Sub