AccessibleObject AccessibleObject AccessibleObject AccessibleObject Class

Definición

Proporciona información que las aplicaciones de accesibilidad usan para adaptar la interfaz de usuario (UI) de una aplicación para usuarios discapacitados.Provides information that accessibility applications use to adjust an application's user interface (UI) for users with impairments.

public ref class AccessibleObject : System::Runtime::InteropServices::StandardOleMarshalObject, Accessibility::IAccessible, System::Reflection::IReflect
[System.Runtime.InteropServices.ComVisible(true)]
public class AccessibleObject : System.Runtime.InteropServices.StandardOleMarshalObject, Accessibility.IAccessible, System.Reflection.IReflect
type AccessibleObject = class
    inherit StandardOleMarshalObject
    interface IReflect
    interface IAccessible
Public Class AccessibleObject
Inherits StandardOleMarshalObject
Implements IAccessible, IReflect
Herencia
AccessibleObjectAccessibleObjectAccessibleObjectAccessibleObject
Derivado
Atributos
Implementaciones

Ejemplos

En el ejemplo de código siguiente se muestra la creación de un gráfico de accesibilidad para controlar, mediante el AccessibleObject y Control.ControlAccessibleObject clases para exponer información accesible.The following code example demonstrates the creation of an accessibility-aware chart control, using the AccessibleObject and Control.ControlAccessibleObject classes to expose accessible information. El control traza dos curvas junto con una leyenda.The control plots two curves along with a legend. El ChartControlAccessibleObject (clase), que se deriva de ControlAccessibleObject, se usa en el CreateAccessibilityInstance método para proporcionar información personalizada accesible para el control chart.The ChartControlAccessibleObject class, which derives from ControlAccessibleObject, is used in the CreateAccessibilityInstance method to provide custom accessible information for the chart control. Dado que la leyenda del gráfico no es un real Control -control basado en, pero en su lugar se dibuja el control de gráfico, no tiene ninguna información accesible.Because the chart legend is not an actual Control -based control, but instead is drawn by the chart control, it does not have any built-in accessible information. Por este motivo, el ChartControlAccessibleObject clase invalida el GetChild método para devolver el CurveLegendAccessibleObject que representa la información accesible de cada parte de la leyenda.Because of this, the ChartControlAccessibleObject class overrides the GetChild method to return the CurveLegendAccessibleObject that represents accessible information for each part of the legend. Cuando una aplicación accesible para usa este control, el control puede proporcionar la información de acceso necesaria.When an accessible-aware application uses this control, the control can provide the necessary accessible information.

#using <Accessibility.dll>
#using <System.dll>
#using <System.Windows.Forms.dll>
#using <System.Drawing.dll>

using namespace System;
using namespace System::Drawing;
using namespace System::Windows::Forms;

// Declare a chart control that demonstrates accessibility in Windows Forms.
public ref class ChartControl: public System::Windows::Forms::UserControl
{
public:
   ref class ChartControlAccessibleObject;

   // forward declaration
   // Inner Class that represents a legend for a curve in the chart.
   ref class CurveLegend
   {

      // Inner class CurveLegendAccessibleObject represents accessible information
      // associated with the CurveLegend object.
   public:
      ref class CurveLegendAccessibleObject: public AccessibleObject
      {
      private:
         CurveLegend^ curveLegend;

      public:
         CurveLegendAccessibleObject( CurveLegend^ curveLegend )
            : AccessibleObject()
         {
            this->curveLegend = curveLegend;
         }


      private:

         property ChartControlAccessibleObject^ ChartControl 
         {

            // Private property that helps get the reference to the parent ChartControl.
            ChartControlAccessibleObject^ get()
            {
               return dynamic_cast<ChartControlAccessibleObject^>(Parent);
            }

         }

      internal:

         property int ID 
         {

            // Internal helper function that returns the ID for this CurveLegend.
            int get()
            {
               for ( int i = 0; i < ChartControl->GetChildCount(); i++ )
               {
                  if ( ChartControl->GetChild( i ) == this )
                  {
                     return i;
                  }

               }
               return  -1;
            }

         }

      public:

         property Rectangle Bounds 
         {

            // Gets the Bounds for the CurveLegend. This is used by accessibility programs.
            virtual Rectangle get() override
            {
               
               // The bounds is in screen coordinates.
               Point loc = curveLegend->Location;
               return Rectangle(curveLegend->chart->PointToScreen( loc ),curveLegend->Size);
            }

         }

         property String^ Name 
         {

            // Gets or sets the Name for the CurveLegend. This is used by accessibility programs.
            virtual String^ get() override
            {
               return curveLegend->Name;
            }

            virtual void set( String^ value ) override
            {
               curveLegend->Name = value;
            }

         }

         property AccessibleObject^ Parent 
         {

            // Gets the Curve Legend Parent's Accessible object.
            // This is used by accessibility programs.
            virtual AccessibleObject^ get() override
            {
               return curveLegend->chart->AccessibilityObject;
            }

         }

         property System::Windows::Forms::AccessibleRole Role 
         {

            // Gets the role for the CurveLegend. This is used by accessibility programs.
            virtual System::Windows::Forms::AccessibleRole get() override
            {
               return ::AccessibleRole::StaticText;
            }

         }

         property AccessibleStates State 
         {

            // Gets the state based on the selection for the CurveLegend.
            // This is used by accessibility programs.
            virtual AccessibleStates get() override
            {
               AccessibleStates state = AccessibleStates::Selectable;
               if ( curveLegend->Selected )
               {
                  state = static_cast<AccessibleStates>(state | AccessibleStates::Selected);
               }

               return state;
            }

         }

         // Navigates through siblings of this CurveLegend. This is used by accessibility programs.
         virtual AccessibleObject^ Navigate( AccessibleNavigation navdir ) override
         {
            
            // Uses the internal NavigateFromChild helper function that exists
            // on ChartControlAccessibleObject.
            return ChartControl->NavigateFromChild( this, navdir );
         }


         // Selects or unselects this CurveLegend. This is used by accessibility programs.
         virtual void Select( AccessibleSelection selection ) override
         {
            
            // Uses the internal SelectChild helper function that exists
            // on ChartControlAccessibleObject.
            ChartControl->SelectChild( this, selection );
         }

      };


   private:

      // class CurveLgendAccessibleObject
      String^ name;
      ChartControl^ chart;
      CurveLegendAccessibleObject^ accObj;
      bool selected;
      Point location;

   public:
      CurveLegend( ChartControl^ chart, String^ name )
      {
         this->chart = chart;
         this->name = name;
         selected = true;
      }


      property AccessibleObject^ AccessibilityObject 
      {

         // Gets the accessibility object for the curve legend.
         AccessibleObject^ get()
         {
            if ( accObj == nullptr )
            {
               accObj = gcnew CurveLegendAccessibleObject( this );
            }

            return accObj;
         }

      }

      property Rectangle Bounds 
      {

         // Gets the bounds for the curve legend.
         Rectangle get()
         {
            return Rectangle(Location,Size);
         }

      }

      property Point Location 
      {

         // Gets or sets the location for the curve legend.
         Point get()
         {
            return location;
         }

         void set( Point value )
         {
            location = value;
            chart->Invalidate();
            
            // Notifies the chart of the location change. This is used for
            // the accessibility information. AccessibleEvents::LocationChange
            // tells the chart the reason for the notification.
            chart->AccessibilityNotifyClients( AccessibleEvents::LocationChange, (dynamic_cast<CurveLegendAccessibleObject^>(AccessibilityObject))->ID );
         }

      }

      property String^ Name 
      {

         // Gets or sets the Name for the curve legend.
         String^ get()
         {
            return name;
         }

         void set( String^ value )
         {
            if ( name != value )
            {
               name = value;
               chart->Invalidate();
               
               // Notifies the chart of the name change. This is used for
               // the accessibility information. AccessibleEvents::NameChange
               // tells the chart the reason for the notification.
               chart->AccessibilityNotifyClients( AccessibleEvents::NameChange, (dynamic_cast<CurveLegendAccessibleObject^>(AccessibilityObject))->ID );
            }
         }

      }

      property bool Selected 
      {

         // Gets or sets the Selected state for the curve legend.
         bool get()
         {
            return selected;
         }

         void set( bool value )
         {
            if ( selected != value )
            {
               selected = value;
               chart->Invalidate();
               
               // Notifies the chart of the selection value change. This is used for
               // the accessibility information. The AccessibleEvents value depends upon
               // if the selection is true (AccessibleEvents::SelectionAdd) or
               // false (AccessibleEvents::SelectionRemove).
               chart->AccessibilityNotifyClients( selected ? AccessibleEvents::SelectionAdd : AccessibleEvents::SelectionRemove, (dynamic_cast<CurveLegendAccessibleObject^>(AccessibilityObject))->ID );
            }
         }

      }

      property System::Drawing::Size Size 
      {

         // Gets the Size for the curve legend.
         System::Drawing::Size get()
         {
            int legendHeight = chart->Font->Height + 4;
            Graphics^ g = chart->CreateGraphics();
            int legendWidth = (int)g->MeasureString( Name, chart->Font ).Width + 4;
            return System::Drawing::Size( legendWidth, legendHeight );
         }

      }

   };


private:

   // class CurveLegend
   CurveLegend^ legend1;
   CurveLegend^ legend2;

public:
   ChartControl()
   {
      
      // The ChartControl draws the chart in the OnPaint .
      SetStyle( ControlStyles::ResizeRedraw, true );
      SetStyle( ControlStyles::DoubleBuffer, true );
      SetStyle( ControlStyles::AllPaintingInWmPaint, true );
      this->BackColor = System::Drawing::Color::White;
      this->Name = "ChartControl";
      this->Click += gcnew System::EventHandler( this, &ChartControl::ChartControl_Click );
      this->QueryAccessibilityHelp += gcnew System::Windows::Forms::QueryAccessibilityHelpEventHandler( this, &ChartControl::ChartControl_QueryAccessibilityHelp );
      
      // The CurveLengend is not Control-based, it just
      // represents the parts of the legend.
      legend1 = gcnew CurveLegend( this,"A" );
      legend1->Location = Point(20,30);
      legend2 = gcnew CurveLegend( this,"B" );
      legend2->Location = Point(20,50);
   }



protected:
   // Overridden to return the custom AccessibleObject
   // for the entire chart.
   virtual AccessibleObject^ CreateAccessibilityInstance() override
   {
      return gcnew ChartControlAccessibleObject( this );
   }

   virtual void OnPaint( PaintEventArgs^ e ) override
   {
      
      // The ChartControl draws the chart in the OnPaint .
      System::Windows::Forms::UserControl::OnPaint( e );
      Rectangle bounds = this->ClientRectangle;
      int border = 5;
      
      // Draws the legends first.
      StringFormat^ format = gcnew StringFormat;
      format->Alignment = StringAlignment::Center;
      format->LineAlignment = StringAlignment::Center;
      if ( legend1 != nullptr )
      {
         if ( legend1->Selected )
         {
            e->Graphics->FillRectangle( gcnew SolidBrush( Color::Blue ), legend1->Bounds );
         }
         else
         {
            e->Graphics->DrawRectangle( Pens::Blue, legend1->Bounds );
         }

         e->Graphics->DrawString( legend1->Name, this->Font, Brushes::Black, legend1->Bounds, format );
      }

      if ( legend2 != nullptr )
      {
         if ( legend2->Selected )
         {
            e->Graphics->FillRectangle( gcnew SolidBrush( Color::Red ), legend2->Bounds );
         }
         else
         {
            e->Graphics->DrawRectangle( Pens::Red, legend2->Bounds );
         }

         e->Graphics->DrawString( legend2->Name, this->Font, Brushes::Black, legend2->Bounds, format );
      }

      
      // Charts out the actual curves that represent data in the Chart.
      bounds.Inflate(  -border,  -border );
      array<Point>^ temp1 = {Point(bounds.Left,bounds.Bottom),Point(bounds.Left + bounds.Width / 3,bounds.Top + bounds.Height / 5),Point(bounds.Right - bounds.Width / 3,(bounds.Top + bounds.Bottom) / 2),Point(bounds.Right,bounds.Top)};
      array<Point>^curve1 = temp1;
      array<Point>^ temp2 = {Point(bounds.Left,bounds.Bottom - bounds.Height / 3),Point(bounds.Left + bounds.Width / 3,bounds.Top + bounds.Height / 5),Point(bounds.Right - bounds.Width / 3,(bounds.Top + bounds.Bottom) / 2),Point(bounds.Right,bounds.Top + bounds.Height / 2)};
      array<Point>^curve2 = temp2;
      
      // Draws the actual curve only if it is selected.
      if ( legend1->Selected )
            e->Graphics->DrawCurve( Pens::Blue, curve1 );

      if ( legend2->Selected )
            e->Graphics->DrawCurve( Pens::Red, curve2 );

      e->Graphics->DrawRectangle( Pens::Blue, bounds );
   }

   // Handles the QueryAccessibilityHelp event.
   void ChartControl_QueryAccessibilityHelp( Object^ /*sender*/, System::Windows::Forms::QueryAccessibilityHelpEventArgs^ e )
   {
      e->HelpString = "Displays chart data";
   }

   // Handles the Click event for the chart.
   // Toggles the selection of whatever legend was clicked on
   void ChartControl_Click( Object^ /*sender*/, System::EventArgs^ /*e*/ )
   {
      Point pt = this->PointToClient( Control::MousePosition );
      if ( legend1->Bounds.Contains( pt ) )
      {
         legend1->Selected =  !legend1->Selected;
      }
      else
      if ( legend2->Bounds.Contains( pt ) )
      {
         legend2->Selected =  !legend2->Selected;
      }
   }


public:

   property array<CurveLegend^>^ Legends 
   {

      // Gets an array of CurveLengends used in the Chart.
      array<CurveLegend^>^ get()
      {
         array<CurveLegend^>^temp3 = {legend1,legend2};
         return temp3;
      }

   }

   // Inner class ChartControlAccessibleObject represents accessible information associated with the ChartControl.
   // The ChartControlAccessibleObject is returned in the ChartControl::CreateAccessibilityInstance .
   ref class ChartControlAccessibleObject: public ControlAccessibleObject
   {
   private:
      ChartControl^ chartControl;

   public:
      ChartControlAccessibleObject( ChartControl^ ctrl )
         : ControlAccessibleObject( ctrl )
      {
         chartControl = ctrl;
      }


      property System::Windows::Forms::AccessibleRole Role 
      {

         // Gets the role for the Chart. This is used by accessibility programs.
         virtual System::Windows::Forms::AccessibleRole get() override
         {
            return ::AccessibleRole::Chart;
         }

      }

      property AccessibleStates State 
      {

         // Gets the state for the Chart. This is used by accessibility programs.
         virtual AccessibleStates get() override
         {
            return AccessibleStates::ReadOnly;
         }

      }

      // The CurveLegend objects are "child" controls in terms of accessibility so
      // return the number of ChartLengend objects.
      virtual int GetChildCount() override
      {
         return chartControl->Legends->Length;
      }


      // Gets the Accessibility object of the child CurveLegend idetified by index.
      virtual AccessibleObject^ GetChild( int index ) override
      {
         if ( index >= 0 && index < chartControl->Legends->Length )
         {
            return chartControl->Legends[ index ]->AccessibilityObject;
         }

         return nullptr;
      }


   internal:

      // Helper function that is used by the CurveLegend's accessibility object
      // to navigate between sibiling controls. Specifically, this function is used in
      // the CurveLegend::CurveLegendAccessibleObject.Navigate function.
      AccessibleObject^ NavigateFromChild( CurveLegend::CurveLegendAccessibleObject^ child, AccessibleNavigation navdir )
      {
         switch ( navdir )
         {
            case AccessibleNavigation::Down:
            case AccessibleNavigation::Next:
               return GetChild( child->ID + 1 );

            case AccessibleNavigation::Up:
            case AccessibleNavigation::Previous:
               return GetChild( child->ID - 1 );
         }
         return nullptr;
      }


      // Helper function that is used by the CurveLegend's accessibility object
      // to select a specific CurveLegend control. Specifically, this function is used
      // in the CurveLegend::CurveLegendAccessibleObject.Select function.
      void SelectChild( CurveLegend::CurveLegendAccessibleObject^ child, AccessibleSelection selection )
      {
         int childID = child->ID;
         
         // Determine which selection action should occur, based on the
         // AccessibleSelection value.
         if ( (selection & AccessibleSelection::TakeSelection) != (AccessibleSelection)0 )
         {
            for ( int i = 0; i < chartControl->Legends->Length; i++ )
            {
               if ( i == childID )
               {
                  chartControl->Legends[ i ]->Selected = true;
               }
               else
               {
                  chartControl->Legends[ i ]->Selected = false;
               }

            }
            
            // AccessibleSelection->AddSelection means that the CurveLegend will be selected.
            if ( (selection & AccessibleSelection::AddSelection) != (AccessibleSelection)0 )
            {
               chartControl->Legends[ childID ]->Selected = true;
            }
            
            // AccessibleSelection->AddSelection means that the CurveLegend will be unselected.
            if ( (selection & AccessibleSelection::RemoveSelection) != (AccessibleSelection)0 )
            {
               chartControl->Legends[ childID ]->Selected = false;
            }
         }
      }

   };

   // class ChartControlAccessibleObject
};


// class ChartControl
public ref class Form1: public System::Windows::Forms::Form
{
private:

   // Test out the Chart Control.
   ChartControl^ chart1;

public:
   Form1()
   {
      
      // Create a chart control and add it to the form.
      this->chart1 = gcnew ChartControl;
      this->ClientSize = System::Drawing::Size( 920, 566 );
      this->chart1->Location = System::Drawing::Point( 47, 16 );
      this->chart1->Size = System::Drawing::Size( 600, 400 );
      this->Controls->Add( this->chart1 );
   }

};


// class Form1

[STAThread]
int main()
{
   Application::Run( gcnew Form1 );
}

using System;
using System.Drawing;
using System.Windows.Forms;

namespace ChartControl
{
    public class Form1 : System.Windows.Forms.Form
    {
        // Test out the Chart Control.
        private ChartControl chart1;

        [STAThread]
        static void Main() 
        {
            Application.Run(new Form1());
        }

        public Form1() {
            // Create a chart control and add it to the form.
            this.chart1 = new ChartControl();
            this.ClientSize = new System.Drawing.Size(920, 566);

            this.chart1.Location = new System.Drawing.Point(47, 16);
            this.chart1.Size = new System.Drawing.Size(600, 400);

            this.Controls.Add(this.chart1);
        }
    }

    // Declare a chart control that demonstrates accessibility in Windows Forms.
    public class ChartControl : System.Windows.Forms.UserControl
    {
        private CurveLegend legend1;
        private CurveLegend legend2; 

        public ChartControl()
        {
            // The ChartControl draws the chart in the OnPaint override.
            SetStyle(ControlStyles.ResizeRedraw, true);
            SetStyle(ControlStyles.DoubleBuffer, true);
            SetStyle(ControlStyles.AllPaintingInWmPaint, true);

            this.BackColor = System.Drawing.Color.White;
            this.Name = "ChartControl";

            this.Click += new System.EventHandler(this.ChartControl_Click);
            this.QueryAccessibilityHelp += 
                new System.Windows.Forms.QueryAccessibilityHelpEventHandler(
                                        this.ChartControl_QueryAccessibilityHelp);

            // The CurveLengend is not Control-based, it just
            // represents the parts of the legend.
            legend1 = new CurveLegend(this, "A");
            legend1.Location = new Point(20, 30);
            legend2 = new CurveLegend(this, "B");        
            legend2.Location = new Point(20, 50);
        }

        // Overridden to return the custom AccessibleObject 
        // for the entire chart.
        protected override AccessibleObject CreateAccessibilityInstance() 
        {            
            return new ChartControlAccessibleObject(this);
        }

        protected override void OnPaint(PaintEventArgs e) 
        {
            // The ChartControl draws the chart in the OnPaint override.
            base.OnPaint(e);

            Rectangle bounds = this.ClientRectangle;
            int border = 5;

            // Draws the legends first.
            StringFormat format = new StringFormat();
            format.Alignment = StringAlignment.Center;
            format.LineAlignment = StringAlignment.Center;
            
            if (legend1 != null) {
                if (legend1.Selected) {
                    e.Graphics.FillRectangle(new SolidBrush(Color.Blue), legend1.Bounds);
                } else {
                    e.Graphics.DrawRectangle(Pens.Blue, legend1.Bounds);
                }

                e.Graphics.DrawString(legend1.Name, this.Font, Brushes.Black, legend1.Bounds, format);                
            }
            if (legend2 != null) {
                if (legend2.Selected) {
                    e.Graphics.FillRectangle(new SolidBrush(Color.Red), legend2.Bounds);
                } else {
                    e.Graphics.DrawRectangle(Pens.Red, legend2.Bounds);
                }
                e.Graphics.DrawString(legend2.Name, this.Font, Brushes.Black, legend2.Bounds, format);
            }            

            // Charts out the actual curves that represent data in the Chart.
            bounds.Inflate(-border, -border);
            Point[] curve1 = new Point[] {new Point(bounds.Left, bounds.Bottom),
                            new Point(bounds.Left + bounds.Width / 3, bounds.Top + bounds.Height / 5),
                            new Point(bounds.Right - bounds.Width / 3, (bounds.Top + bounds.Bottom) / 2),
                            new Point(bounds.Right, bounds.Top)};

            Point[] curve2 = new Point[] {new Point(bounds.Left, bounds.Bottom - bounds.Height / 3),
                            new Point(bounds.Left + bounds.Width / 3, bounds.Top + bounds.Height / 5),
                            new Point(bounds.Right - bounds.Width / 3, (bounds.Top + bounds.Bottom) / 2),
                            new Point(bounds.Right, bounds.Top + bounds.Height / 2)};

            // Draws the actual curve only if it is selected.
            if (legend1.Selected) e.Graphics.DrawCurve(Pens.Blue, curve1);
            if (legend2.Selected) e.Graphics.DrawCurve(Pens.Red, curve2);

            e.Graphics.DrawRectangle(Pens.Blue, bounds);            
        }

        // Handles the QueryAccessibilityHelp event.
        private void ChartControl_QueryAccessibilityHelp(object sender, 
                                    System.Windows.Forms.QueryAccessibilityHelpEventArgs e)
        {            
            e.HelpString = "Displays chart data";
        }          

        // Handles the Click event for the chart. 
        // Toggles the selection of whatever legend was clicked on
        private void ChartControl_Click(object sender, System.EventArgs e)
        {
            Point pt = this.PointToClient(Control.MousePosition);
            if (legend1.Bounds.Contains(pt)) {
                legend1.Selected = !legend1.Selected;

            } else if (legend2.Bounds.Contains(pt)) {
                legend2.Selected = !legend2.Selected;
            }
        }

        // Gets an array of CurveLengends used in the Chart.
        public CurveLegend[] Legends
        {   
            get {                
                return new CurveLegend[] { legend1, legend2 };
            }            
        }                

        // Inner class ChartControlAccessibleObject represents accessible information associated with the ChartControl.
        // The ChartControlAccessibleObject is returned in the ChartControl.CreateAccessibilityInstance override.
        public class ChartControlAccessibleObject : ControlAccessibleObject
        {
            ChartControl chartControl;

            public ChartControlAccessibleObject(ChartControl ctrl) : base(ctrl) 
            {
                chartControl = ctrl;
            }

            // Gets the role for the Chart. This is used by accessibility programs.
            public override AccessibleRole Role
            {  
                get {
                    return AccessibleRole.Chart;
                }
            }

            // Gets the state for the Chart. This is used by accessibility programs.
            public override AccessibleStates State
            {  
                get {                    
                    return AccessibleStates.ReadOnly;
                }
            }

            // The CurveLegend objects are "child" controls in terms of accessibility so 
            // return the number of ChartLengend objects.
            public override int GetChildCount()
            {  
                return chartControl.Legends.Length;
            }

            // Gets the Accessibility object of the child CurveLegend idetified by index.
            public override AccessibleObject GetChild(int index)
            {  
                if (index >= 0 && index < chartControl.Legends.Length) {
                    return chartControl.Legends[index].AccessibilityObject;
                }                
                return null;
            }

            // Helper function that is used by the CurveLegend's accessibility object
            // to navigate between sibiling controls. Specifically, this function is used in
            // the CurveLegend.CurveLegendAccessibleObject.Navigate function.
            internal AccessibleObject NavigateFromChild(CurveLegend.CurveLegendAccessibleObject child, 
                                                        AccessibleNavigation navdir) 
            {  
                switch(navdir) {
                    case AccessibleNavigation.Down:
                    case AccessibleNavigation.Next:
                        return GetChild(child.ID + 1);
                        
                    case AccessibleNavigation.Up:
                    case AccessibleNavigation.Previous:
                        return GetChild(child.ID - 1);                        
                }
                return null;
            }

            // Helper function that is used by the CurveLegend's accessibility object
            // to select a specific CurveLegend control. Specifically, this function is used
            // in the CurveLegend.CurveLegendAccessibleObject.Select function.
            internal void SelectChild(CurveLegend.CurveLegendAccessibleObject child, AccessibleSelection selection) 
            {   
                int childID = child.ID;

                // Determine which selection action should occur, based on the
                // AccessibleSelection value.
                if ((selection & AccessibleSelection.TakeSelection) != 0) {
                    for(int i = 0; i < chartControl.Legends.Length; i++) {
                        if (i == childID) {
                            chartControl.Legends[i].Selected = true;                        
                        } else {
                            chartControl.Legends[i].Selected = false;
                        }
                    }

                    // AccessibleSelection.AddSelection means that the CurveLegend will be selected.
                    if ((selection & AccessibleSelection.AddSelection) != 0) {
                        chartControl.Legends[childID].Selected = true;                        
                    }

                    // AccessibleSelection.AddSelection means that the CurveLegend will be unselected.
                    if ((selection & AccessibleSelection.RemoveSelection) != 0) {
                        chartControl.Legends[childID].Selected = false;                        
                    }
                }            
            }
        }

        // Inner Class that represents a legend for a curve in the chart.
        public class CurveLegend 
        {
            private string name;
            private ChartControl chart;
            private CurveLegendAccessibleObject accObj;
            private bool selected = true;
            private Point location;

            public CurveLegend(ChartControl chart, string name) 
            {
                this.chart = chart;
                this.name = name;
            }

            // Gets the accessibility object for the curve legend.
            public AccessibleObject AccessibilityObject
            {
                get {
                    if (accObj == null) {
                        accObj = new CurveLegendAccessibleObject(this);
                    }
                    return accObj;
                }
            }
            
            // Gets the bounds for the curve legend.
            public Rectangle Bounds
            {   
                get {
                    return new Rectangle(Location, Size);
                }
            }

            // Gets or sets the location for the curve legend.
            public Point Location
            {   
                get {
                    return location;
                }
                set {
                    location = value;
                    chart.Invalidate();

                    // Notifies the chart of the location change. This is used for
                    // the accessibility information. AccessibleEvents.LocationChange
                    // tells the chart the reason for the notification.

                    chart.AccessibilityNotifyClients(AccessibleEvents.LocationChange, 
                        ((CurveLegendAccessibleObject)AccessibilityObject).ID);
                }
            }            
        
            // Gets or sets the Name for the curve legend.
            public string Name
            {   
                get {
                    return name;
                }
                set {
                    if (name != value) 
                    {
                        name = value;
                        chart.Invalidate();

                        // Notifies the chart of the name change. This is used for
                        // the accessibility information. AccessibleEvents.NameChange
                        // tells the chart the reason for the notification.

                        chart.AccessibilityNotifyClients(AccessibleEvents.NameChange, 
                            ((CurveLegendAccessibleObject)AccessibilityObject).ID);
                    }
                }
            }

            // Gets or sets the Selected state for the curve legend.
            public bool Selected
            {   
                get {
                    return selected;
                }
                set {
                    if (selected != value) 
                    {
                        selected = value;
                        chart.Invalidate();

                        // Notifies the chart of the selection value change. This is used for
                        // the accessibility information. The AccessibleEvents value depends upon
                        // if the selection is true (AccessibleEvents.SelectionAdd) or 
                        // false (AccessibleEvents.SelectionRemove).
                        chart.AccessibilityNotifyClients(
                            selected ? AccessibleEvents.SelectionAdd : AccessibleEvents.SelectionRemove, 
                            ((CurveLegendAccessibleObject)AccessibilityObject).ID);
                    }
                }
            }

            // Gets the Size for the curve legend.
            public Size Size
            {   
                get {                    
                    int legendHeight = chart.Font.Height + 4;
                    Graphics g = chart.CreateGraphics();
                    int legendWidth = (int)g.MeasureString(Name, chart.Font).Width + 4;            

                    return new Size(legendWidth, legendHeight);
                }
            }
    
            // Inner class CurveLegendAccessibleObject represents accessible information 
            // associated with the CurveLegend object.
            public class CurveLegendAccessibleObject : AccessibleObject
            {
                private CurveLegend curveLegend;

                public CurveLegendAccessibleObject(CurveLegend curveLegend) : base() 
                {
                    this.curveLegend = curveLegend;                    
                }                

                // Private property that helps get the reference to the parent ChartControl.
                private ChartControlAccessibleObject ChartControl
                {   
                    get {
                        return Parent as ChartControlAccessibleObject;
                    }
                }

                // Internal helper function that returns the ID for this CurveLegend.
                internal int ID
                {
                    get {
                        for(int i = 0; i < ChartControl.GetChildCount(); i++) {
                            if (ChartControl.GetChild(i) == this) {
                                return i;
                            }
                        }
                        return -1;
                    }
                }

                // Gets the Bounds for the CurveLegend. This is used by accessibility programs.
                public override Rectangle Bounds
                {
                    get {                        
                        // The bounds is in screen coordinates.
                        Point loc = curveLegend.Location;
                        return new Rectangle(curveLegend.chart.PointToScreen(loc), curveLegend.Size);
                    }
                }

                // Gets or sets the Name for the CurveLegend. This is used by accessibility programs.
                public override string Name
                {
                    get {
                        return curveLegend.Name;
                    }
                    set {
                        curveLegend.Name = value;                        
                    }
                }

                // Gets the Curve Legend Parent's Accessible object.
                // This is used by accessibility programs.
                public override AccessibleObject Parent
                {
                    get {
                        return curveLegend.chart.AccessibilityObject;
                    }
                }

                // Gets the role for the CurveLegend. This is used by accessibility programs.
                public override AccessibleRole Role 
                {
                    get {
                        return AccessibleRole.StaticText;
                    }
                }

                // Gets the state based on the selection for the CurveLegend. 
                // This is used by accessibility programs.
                public override AccessibleStates State 
                {
                    get {
                        AccessibleStates state = AccessibleStates.Selectable;
                        if (curveLegend.Selected) 
                        {
                            state |= AccessibleStates.Selected;
                        }
                        return state;
                    }
                }

                // Navigates through siblings of this CurveLegend. This is used by accessibility programs.
                public override AccessibleObject Navigate(AccessibleNavigation navdir) 
                {
                    // Uses the internal NavigateFromChild helper function that exists
                    // on ChartControlAccessibleObject.
                    return ChartControl.NavigateFromChild(this, navdir);
                }

                // Selects or unselects this CurveLegend. This is used by accessibility programs.
                public override void Select(AccessibleSelection selection) 
                {
                    // Uses the internal SelectChild helper function that exists
                    // on ChartControlAccessibleObject.
                    ChartControl.SelectChild(this, selection);
                }
            }
        }
    }
}
Option Explicit

Imports System
Imports System.Drawing
Imports System.Windows.Forms

Namespace ChartControlNameSpace
    
    Public Class Form1 
        Inherits System.Windows.Forms.Form

        ' Test out the Chart Control.
        Private chart1 As ChartControl

        <System.STAThread()> _
        Public Shared Sub Main()
            System.Windows.Forms.Application.Run(New Form1())
        End Sub 'Main

        Public Sub New() 
            ' Create a chart control and add it to the form.
            Me.chart1 = New ChartControl()
            Me.ClientSize = New System.Drawing.Size(920, 566)

            Me.chart1.Location = New System.Drawing.Point(47, 16)
            Me.chart1.Size = New System.Drawing.Size(600, 400)

            Me.Controls.Add(Me.chart1)
        End Sub
    End Class

    ' Declares a chart control that demonstrates Accessibility in Windows Forms.
    Public Class ChartControl
        Inherits System.Windows.Forms.UserControl

        Private legend1 As CurveLegend
        Private legend2 As CurveLegend
        
        Public Sub New()
            ' The ChartControl draws the chart in the OnPaint override.
            SetStyle(ControlStyles.ResizeRedraw, True)
            SetStyle(ControlStyles.DoubleBuffer, True)
            SetStyle(ControlStyles.AllPaintingInWmPaint, True)
            
            Me.BackColor = System.Drawing.Color.White
            Me.Name = "ChartControl"

            ' The CurveLengend is not Control-based, it just
            ' represent the parts of the legend.
            legend1 = New CurveLegend(Me, "A")
            legend1.Location = New Point(20, 30)
            legend2 = New CurveLegend(Me, "B")
            legend2.Location = New Point(20, 50)
        End Sub 'New
              
        ' Overridden to return the custom AccessibleObject 
        ' for the entire chart.
        Protected Overrides Function CreateAccessibilityInstance() As AccessibleObject
            Return New ChartControlAccessibleObject(Me)
        End Function 

        Protected Overrides Sub OnPaint(e As PaintEventArgs)
            ' The ChartControl draws the chart in the OnPaint override.
            MyBase.OnPaint(e)
            
            Dim bounds As Rectangle = Me.ClientRectangle
            Dim border As Integer = 5
            
            ' Draw the legends first.
            Dim format As New StringFormat()
            format.Alignment = StringAlignment.Center
            format.LineAlignment = StringAlignment.Center
            
            If (legend1 IsNot Nothing) Then
                If legend1.Selected Then
                    e.Graphics.FillRectangle(New SolidBrush(Color.Blue), legend1.Bounds)
                Else
                    e.Graphics.DrawRectangle(Pens.Blue, legend1.Bounds)
                End If
                e.Graphics.DrawString(legend1.Name, Me.Font, Brushes.Black, RectangleF.op_Implicit(legend1.Bounds), format)
            End If
            If (legend2 IsNot Nothing) Then
                If legend2.Selected Then
                    e.Graphics.FillRectangle(New SolidBrush(Color.Red), legend2.Bounds)
                Else
                    e.Graphics.DrawRectangle(Pens.Red, legend2.Bounds)
                End If
                e.Graphics.DrawString(legend2.Name, Me.Font, Brushes.Black, RectangleF.op_Implicit(legend2.Bounds), format)
            End If
            
            ' Chart out the actual curves that represent data in the Chart.
            bounds.Inflate(-border, -border)
            Dim curve1() As Point = {New Point(bounds.Left, bounds.Bottom), _
                                     New Point(bounds.Left + bounds.Width / 3, bounds.Top + bounds.Height / 5), _
                                     New Point(bounds.Right - bounds.Width / 3,(bounds.Top + bounds.Bottom) / 2), _
                                     New Point(bounds.Right, bounds.Top)}

            Dim curve2() As Point = {New Point(bounds.Left, bounds.Bottom - bounds.Height / 3), _
                                     New Point(bounds.Left + bounds.Width / 3, bounds.Top + bounds.Height / 5), _
                                     New Point(bounds.Right - bounds.Width / 3,(bounds.Top + bounds.Bottom) / 2), _
                                     New Point(bounds.Right, bounds.Top + bounds.Height / 2)}
            
            ' Draw the actual curve only if it is selected.
            If legend1.Selected Then
                e.Graphics.DrawCurve(Pens.Blue, curve1)
            End If
            If legend2.Selected Then
                e.Graphics.DrawCurve(Pens.Red, curve2)
            End If 
            e.Graphics.DrawRectangle(Pens.Blue, bounds)
        End Sub 'OnPaint
        
        ' Handle the QueryAccessibilityHelp event.
        Private Sub ChartControl_QueryAccessibilityHelp(sender As Object, _
                           e As System.Windows.Forms.QueryAccessibilityHelpEventArgs) Handles MyBase.QueryAccessibilityHelp
            e.HelpString = "Displays chart data"
        End Sub 

        ' Handle the Click event for the chart. 
        ' Toggle the selection of whatever legend was clicked.     
        Private Sub ChartControl_Click(sender As Object, e As System.EventArgs) Handles MyBase.Click

            Dim pt As Point = Me.PointToClient(Control.MousePosition)
            If legend1.Bounds.Contains(pt) Then
                legend1.Selected = Not legend1.Selected
            Else
                If legend2.Bounds.Contains(pt) Then
                    legend2.Selected = Not legend2.Selected
                End If
            End If
        End Sub 'ChartControl_Click

        ' Get an array of the CurveLengends used in the Chart.
        Public ReadOnly Property Legends() As CurveLegend()
            Get
                Return New CurveLegend() {legend1, legend2}
            End Get
        End Property
        
        Protected Sub ExposeAccessibilityNotifyClients(ByVal accEvent As AccessibleEvents, ByVal childID As Integer)
            AccessibilityNotifyClients(accEvent, childID) 
        End Sub

        ' Inner Class ChartControlAccessibleObject represents accessible information 
        ' associated with the ChartControl.
        ' The ChartControlAccessibleObject is returned in the         ' ChartControl.CreateAccessibilityInstance override.
        Public Class ChartControlAccessibleObject
            Inherits Control.ControlAccessibleObject

            Private chartControl As ChartControl
            
            Public Sub New(ctrl As ChartControl)
                MyBase.New(ctrl)
                chartControl = ctrl
            End Sub 'New
            
            ' Get the role for the Chart. This is used by accessibility programs.            
            Public Overrides ReadOnly Property Role() As AccessibleRole
                Get
                    Return System.Windows.Forms.AccessibleRole.Chart
                End Get
            End Property
            
            ' Get the state for the Chart. This is used by accessibility programs.            
            Public Overrides ReadOnly Property State() As AccessibleStates
                Get
                    Return AccessibleStates.ReadOnly
                End Get
            End Property                        
            
            ' The CurveLegend objects are "child" controls in terms of accessibility so 
            ' return the number of ChartLengend objects.            
            Public Overrides Function GetChildCount() As Integer
                Return chartControl.Legends.Length
            End Function 
            
            ' Get the Accessibility object of the child CurveLegend idetified by index.
            Public Overrides Function GetChild(index As Integer) As AccessibleObject
                If index >= 0 And index < chartControl.Legends.Length Then
                    Return chartControl.Legends(index).AccessibilityObject
                End If
                Return Nothing
            End Function 
            
            ' Helper function that is used by the CurveLegend's accessibility object
            ' to navigate between sibiling controls. Specifically, this function is used in
            ' the CurveLegend.CurveLegendAccessibleObject.Navigate function.
            Friend Function NavigateFromChild(child As CurveLegend.CurveLegendAccessibleObject, _
                                            navdir As AccessibleNavigation) As AccessibleObject
                Select Case navdir
                    Case AccessibleNavigation.Down, AccessibleNavigation.Next
                            Return GetChild(child.ID + 1)
                    
                    Case AccessibleNavigation.Up, AccessibleNavigation.Previous
                            Return GetChild(child.ID - 1)
                End Select
                Return Nothing
            End Function            

            ' Helper function that is used by the CurveLegend's accessibility object
            ' to select a specific CurveLegend control. Specifically, this function is used 
            ' in the CurveLegend.CurveLegendAccessibleObject.Select function.            
            Friend Sub SelectChild(child As CurveLegend.CurveLegendAccessibleObject, selection As AccessibleSelection)
                Dim childID As Integer = child.ID
                
                ' Determine which selection action should occur, based on the
                ' AccessibleSelection value.
                If (selection And AccessibleSelection.TakeSelection) <> 0 Then
                    Dim i As Integer
                    For i = 0 To chartControl.Legends.Length - 1
                        If i = childID Then
                            chartControl.Legends(i).Selected = True
                        Else
                            chartControl.Legends(i).Selected = False
                        End If
                    Next i
                    
                    ' AccessibleSelection.AddSelection means that the CurveLegend will be selected.
                    If (selection And AccessibleSelection.AddSelection) <> 0 Then
                        chartControl.Legends(childID).Selected = True
                    End If

                    ' AccessibleSelection.AddSelection means that the CurveLegend will be unselected.                    
                    If (selection And AccessibleSelection.RemoveSelection) <> 0 Then
                        chartControl.Legends(childID).Selected = False
                    End If
                End If
            End Sub 'SelectChild
        End Class 'ChartControlAccessibleObject

        ' Inner Class that represents a legend for a curve in the chart.
        Public Class CurveLegend
            Private m_name As String
            Private chart As ChartControl
            Private accObj As CurveLegendAccessibleObject
            Private m_selected As Boolean = True
            Private m_location As Point
            
            Public Sub New(chart As ChartControl, name As String)
                Me.chart = chart
                Me.m_name = name
            End Sub 'New

            ' Gets the accessibility object for the curve legend.            
            Public ReadOnly Property AccessibilityObject() As AccessibleObject
                Get
                    If accObj Is Nothing Then
                        accObj = New CurveLegendAccessibleObject(Me)
                    End If
                    Return accObj
                End Get
            End Property
            
            ' Gets the bounds for the curve legend.            
            Public ReadOnly Property Bounds() As Rectangle
                Get
                    Return New Rectangle(Location, Size)
                End Get
            End Property

            ' Gets or sets the location for the curve legend.            
            Public Property Location() As Point
                Get
                    Return m_location
                End Get
                Set
                    m_location = value
                    chart.Invalidate()

                    ' Notifies the chart of the location change. This is used for
                    ' the accessibility information. AccessibleEvents.LocationChange
                    ' tells the chart the reason for the notification.
                    chart.ExposeAccessibilityNotifyClients(AccessibleEvents.LocationChange, _
                            CType(AccessibilityObject, CurveLegendAccessibleObject).ID)
                End Set
            End Property
            
            ' Gets or sets the Name for the curve legend.            
            Public Property Name() As String
                Get
                    Return m_name
                End Get
                Set
                    If m_name <> value Then
                        m_name = value
                        chart.Invalidate()

                        ' Notifies the chart of the name change. This is used for
                        ' the accessibility information. AccessibleEvents.NameChange
                        ' tells the chart the reason for the notification. 
                        chart.ExposeAccessibilityNotifyClients(AccessibleEvents.NameChange, _
                                CType(AccessibilityObject, CurveLegendAccessibleObject).ID)
                    End If
                End Set
            End Property
            
            ' Gets or sets the Selected state for the curve legend.            
            Public Property Selected() As Boolean
                Get
                    Return m_selected
                End Get
                Set
                    If m_selected <> value Then
                        m_selected = value
                        chart.Invalidate()

                        ' Notifies the chart of the selection value change. This is used for
                        ' the accessibility information. The AccessibleEvents value varies
                        ' on whether the selection is true (AccessibleEvents.SelectionAdd) or 
                        ' false (AccessibleEvents.SelectionRemove). 
                        If m_selected Then
                            chart.ExposeAccessibilityNotifyClients(AccessibleEvents.SelectionAdd, _
                                    CType(AccessibilityObject, CurveLegendAccessibleObject).ID) 
                        Else
                            chart.ExposeAccessibilityNotifyClients(AccessibleEvents.SelectionRemove, _
                                    CType(AccessibilityObject, CurveLegendAccessibleObject).ID) 
                        End If
                    End If
                End Set
            End Property
            
            ' Gets the Size for the curve legend.            
            Public ReadOnly Property Size() As Size
                Get
                    Dim legendHeight As Integer = chart.Font.Height + 4
                    Dim g As Graphics = chart.CreateGraphics()
                    Dim legendWidth As Integer = CInt(g.MeasureString(Name, chart.Font).Width) + 4
                    
                    Return New Size(legendWidth, legendHeight)
                End Get
            End Property
            
            
            ' Inner class CurveLegendAccessibleObject represents accessible information 
            ' associated with the CurveLegend object.
            Public Class CurveLegendAccessibleObject
                Inherits AccessibleObject

                Private curveLegend As CurveLegend
                
                Public Sub New(curveLegend As CurveLegend)
                    Me.curveLegend = curveLegend
                End Sub 'New
                
                ' Private property that helps get the reference to the parent ChartControl.                
                Private ReadOnly Property ChartControl() As ChartControlAccessibleObject
                    Get
                        Return CType(Parent, ChartControlAccessibleObject)
                    End Get
                End Property

                ' Friend helper function that returns the ID for this CurveLegend.                
                Friend ReadOnly Property ID() As Integer
                    Get
                        Dim i As Integer
                        For i = 0 To (ChartControl.GetChildCount()) - 1
                            If ChartControl.GetChild(i) Is Me Then
                                Return i
                            End If
                        Next i
                        Return - 1
                    End Get
                End Property
                
                ' Gets the Bounds for the CurveLegend. This is used by accessibility programs.
                Public Overrides ReadOnly Property Bounds() As Rectangle
                    Get
                        ' The bounds is in screen coordinates.
                        Dim loc As Point = curveLegend.Location
                        Return New Rectangle(curveLegend.chart.PointToScreen(loc), curveLegend.Size)
                    End Get
                End Property

                ' Gets or sets the Name for the CurveLegend. This is used by accessibility programs.                
                Public Overrides Property Name() As String
                    Get
                        Return curveLegend.Name
                    End Get
                    Set
                        curveLegend.Name = value
                    End Set
                End Property
                
                ' Gets the Curve Legend Parent's Accessible object.
                ' This is used by accessibility programs.                
                Public Overrides ReadOnly Property Parent() As AccessibleObject
                    Get
                        Return curveLegend.chart.AccessibilityObject
                    End Get
                End Property
                
                ' Gets the role for the CurveLegend. This is used by accessibility programs.                
                Public Overrides ReadOnly Property Role() As AccessibleRole
                    Get
                        Return System.Windows.Forms.AccessibleRole.StaticText
                    End Get
                End Property

                ' Gets the state based on the selection for the CurveLegend. 
                ' This is used by accessibility programs.                
                Public Overrides ReadOnly Property State() As AccessibleStates
                    Get
                        Dim stateTemp As AccessibleStates = AccessibleStates.Selectable
                        If curveLegend.Selected Then
                            stateTemp = stateTemp Or AccessibleStates.Selected
                        End If
                        Return stateTemp
                    End Get
                End Property
                
                ' Navigates through siblings of this CurveLegend. This is used by accessibility programs.                
                Public Overrides Function Navigate(navdir As AccessibleNavigation) As AccessibleObject
                    ' Use the Friend NavigateFromChild helper function that exists
                    ' on ChartControlAccessibleObject.
                    Return ChartControl.NavigateFromChild(Me, navdir)
                End Function
                
                ' Selects or unselects this CurveLegend. This is used by accessibility programs.
                Public Overrides Sub [Select](selection As AccessibleSelection)

                    ' Use the internal SelectChild helper function that exists
                    ' on ChartControlAccessibleObject.
                    ChartControl.SelectChild(Me, selection)
                End Sub

            End Class 'CurveLegendAccessibleObject

        End Class 'CurveLegend

    End Class 'ChartControl

End Namespace 'ChartControlNameSpace

Comentarios

Las aplicaciones de accesibilidad pueden ajustar las características de la aplicación para mejorar la facilidad de uso para los usuarios con discapacidades.Accessibility applications can adjust features of the application to improve usability for users with disabilities.

Para los usuarios con discapacidades visuales, puede ajustar las características de software y sistema operativo para cumplir con sus necesidades.For users who are visually impaired, you can adjust software and operating system features to comply with their needs. Por ejemplo, puede ampliar el texto e imágenes y representarlos con un contraste.For example, you can enlarge text and images and render them with a contrast. Además, puede daltónicos mediante el uso adecuado de colores.In addition, you can accommodate color-blindness with the appropriate use of colors. Para los usuarios con discapacidades visuales graves, los equipos son accesibles mediante soportes de revisión que se traducen en pantalla texto a voz o a una pantalla dinámica actualizable, Braille.For users who are severely visually impaired, computers are accessible with screen review aids that translate on-screen text to speech or to a dynamic, refreshable, Braille display.

Para los usuarios que son difíciles de audiencia, puede diseñar programas que utilizan indicaciones visuales, como una barra de herramientas intermitente; o bien, puede mostrar mensajes de voz como texto.For users who are hard of hearing, you can design programs that use visual cues, such as a flashing toolbar; or you can display spoken messages as text. Por ejemplo, cuando se activa, el SoundSentry característica, una opción de accesibilidad en el Panel de Control, proporciona una advertencia visual cada vez que el sistema realiza una alarma sonido.For example, when turned on, the SoundSentry feature, an accessibility option in Control Panel, provides a visual warning whenever the system makes an alarm sound.

Para los usuarios con discapacidades motoras, puede diseñar controles que adapten o eliminen el uso del teclado y mouse, lo que mejora la accesibilidad del equipo.For users with motion disabilities, you can design controls that refine or eliminate keyboard and mouse use, thereby improving computer accessibility. Panel de control ofrece asistencia.Control Panel offers assistance. Por ejemplo, una alternativa es usar el teclado numérico en lugar del mouse para la navegación.For example, one alternative is to use the numeric keypad instead of the mouse for navigation. Otra opción, denominada StickyKeys, permite a los usuarios que no pueden contener dos o más teclas a la vez (por ejemplo, CTRL+P) para obtener el mismo resultado, escriba una clave a la vez.Another option, called StickyKeys, enables users who cannot hold down two or more keys at a time (such as CTRL+P) to get the same result by typing one key at a time.

Para los usuarios con cognitive y aprendizaje, puede diseñar programas de software que se adaptan mejor a sus necesidades.For users with cognitive and language disabilities, you can design software programs to better accommodate their needs. Por ejemplo, utilizando la secuenciación llamativas o de guía, presentaciones sencillas, menos palabras y un nivel de lectura destinados a los estándares de enseñanza primaria puede beneficiar a estos usuarios.For example, using conspicuous or cued sequencing, uncomplicated displays, fewer words, and a reading level targeted to elementary school standards can benefit these users.

Para los usuarios con problemas de convulsiones, puede diseñar programas de software para eliminar puedan provocar dichos patrones de asumir la función.For users with seizure disorders, you can design software programs to eliminate seizure provoking patterns.

Para obtener más información sobre la accesibilidad, incluida información acerca de las aplicaciones de accesibilidad, consulte la documentación de Microsoft Accessibility en MSDN library o en el sitio Web de Microsoft.For more information about accessibility, including information about accessibility applications, see the documentation for Microsoft Accessibility in the MSDN library or at the Microsoft Web site.

Nota

Para usar el AccessibleObject, debe agregar una referencia a la Accessibility ensamblado instalado con el .NET Framework.NET Framework.To use the AccessibleObject, you must add a reference to the Accessibility assembly installed with the .NET Framework.NET Framework. Windows Forms solo es compatible con Active Accessibility 2.0.Windows Forms only supports Active Accessibility 2.0.

Notas a los desarrolladores de herederos

Al heredar de esta clase, puede invalidar a todos los miembros.When you inherit from this class, you can override all the members.

Constructores

AccessibleObject() AccessibleObject() AccessibleObject() AccessibleObject()

Inicializa una nueva instancia de la clase AccessibleObject.Initializes a new instance of the AccessibleObject class.

Propiedades

Bounds Bounds Bounds Bounds

Obtiene la ubicación y el tamaño del objeto accesible.Gets the location and size of the accessible object.

DefaultAction DefaultAction DefaultAction DefaultAction

Obtiene una cadena que describe la acción predeterminada del objeto.Gets a string that describes the default action of the object. No todos los objetos tienen una acción predeterminada.Not all objects have a default action.

Description Description Description Description

Obtiene una cadena que describe la apariencia visual del objeto especificado.Gets a string that describes the visual appearance of the specified object. No todos los objetos tienen una descripción.Not all objects have a description.

Help Help Help Help

Obtiene una descripción de lo que el objeto hace o de cómo se utiliza.Gets a description of what the object does or how the object is used.

KeyboardShortcut KeyboardShortcut KeyboardShortcut KeyboardShortcut

Obtiene la tecla de método abreviado o la tecla de acceso para el objeto accesible.Gets the shortcut key or access key for the accessible object.

Name Name Name Name

Obtiene o establece el nombre del objeto.Gets or sets the object name.

Parent Parent Parent Parent

Obtiene el primario de un objeto accesible.Gets the parent of an accessible object.

Role Role Role Role

Obtiene la función de este objeto accesible.Gets the role of this accessible object.

State State State State

Obtiene el estado de este objeto accesible.Gets the state of this accessible object.

Value Value Value Value

Obtiene o establece el valor de un objeto accesible.Gets or sets the value of an accessible object.

Métodos

CreateObjRef(Type) CreateObjRef(Type) CreateObjRef(Type) CreateObjRef(Type)

Crea un objeto que contiene toda la información relevante necesaria para generar un proxy utilizado para comunicarse con un objeto remoto.Creates an object that contains all the relevant information required to generate a proxy used to communicate with a remote object.

(Inherited from MarshalByRefObject)
DoDefaultAction() DoDefaultAction() DoDefaultAction() DoDefaultAction()

Realiza la acción predeterminada asociada a este objeto accesible.Performs the default action associated with this accessible object.

Equals(Object) Equals(Object) Equals(Object) Equals(Object)

Determina si el objeto especificado es igual al objeto actual.Determines whether the specified object is equal to the current object.

(Inherited from Object)
GetChild(Int32) GetChild(Int32) GetChild(Int32) GetChild(Int32)

Recupera el elemento secundario accesible correspondiente al índice especificado.Retrieves the accessible child corresponding to the specified index.

GetChildCount() GetChildCount() GetChildCount() GetChildCount()

Recupera el número de elementos secundarios que pertenecen a un objeto accesible.Retrieves the number of children belonging to an accessible object.

GetFocused() GetFocused() GetFocused() GetFocused()

Recupera el objeto que tiene el foco de teclado.Retrieves the object that has the keyboard focus.

GetHashCode() GetHashCode() GetHashCode() GetHashCode()

Sirve como la función hash predeterminada.Serves as the default hash function.

(Inherited from Object)
GetHelpTopic(String) GetHelpTopic(String) GetHelpTopic(String) GetHelpTopic(String)

Obtiene un identificador de un tema de ayuda y la ruta de acceso al archivo de ayuda asociado a este objeto accesible.Gets an identifier for a Help topic identifier and the path to the Help file associated with this accessible object.

GetLifetimeService() GetLifetimeService() GetLifetimeService() GetLifetimeService()

Recupera el objeto de servicio de duración actual que controla la directiva de duración de esta instancia.Retrieves the current lifetime service object that controls the lifetime policy for this instance.

(Inherited from MarshalByRefObject)
GetSelected() GetSelected() GetSelected() GetSelected()

Recupera el secundario seleccionado actualmente.Retrieves the currently selected child.

GetType() GetType() GetType() GetType()

Obtiene el Type de la instancia actual.Gets the Type of the current instance.

(Inherited from Object)
HitTest(Int32, Int32) HitTest(Int32, Int32) HitTest(Int32, Int32) HitTest(Int32, Int32)

Recupera el objeto secundario que se encuentra en las coordenadas de pantalla especificadas.Retrieves the child object at the specified screen coordinates.

InitializeLifetimeService() InitializeLifetimeService() InitializeLifetimeService() InitializeLifetimeService()

Obtiene un objeto de servicio de duración para controlar la directiva de duración de esta instancia.Obtains a lifetime service object to control the lifetime policy for this instance.

(Inherited from MarshalByRefObject)
MemberwiseClone() MemberwiseClone() MemberwiseClone() MemberwiseClone()

Crea una copia superficial del Object actual.Creates a shallow copy of the current Object.

(Inherited from Object)
MemberwiseClone(Boolean) MemberwiseClone(Boolean) MemberwiseClone(Boolean) MemberwiseClone(Boolean)

Crea una copia superficial del objeto MarshalByRefObject actual.Creates a shallow copy of the current MarshalByRefObject object.

(Inherited from MarshalByRefObject)
Navigate(AccessibleNavigation) Navigate(AccessibleNavigation) Navigate(AccessibleNavigation) Navigate(AccessibleNavigation)

Navega hasta otro objeto accesible.Navigates to another accessible object.

RaiseAutomationNotification(AutomationNotificationKind, AutomationNotificationProcessing, String) RaiseAutomationNotification(AutomationNotificationKind, AutomationNotificationProcessing, String) RaiseAutomationNotification(AutomationNotificationKind, AutomationNotificationProcessing, String) RaiseAutomationNotification(AutomationNotificationKind, AutomationNotificationProcessing, String)

Genera el evento de notificación de automatización de interfaz de usuario.Raises the UI automation notification event.

RaiseLiveRegionChanged() RaiseLiveRegionChanged() RaiseLiveRegionChanged() RaiseLiveRegionChanged()

Genera el evento de automatización de la interfaz de usuario LiveRegionChanged.Raises the LiveRegionChanged UI automation event.

Select(AccessibleSelection) Select(AccessibleSelection) Select(AccessibleSelection) Select(AccessibleSelection)

Modifica la selección o desplaza el foco de teclado del objeto accesible.Modifies the selection or moves the keyboard focus of the accessible object.

ToString() ToString() ToString() ToString()

Devuelve una cadena que representa el objeto actual.Returns a string that represents the current object.

(Inherited from Object)
UseStdAccessibleObjects(IntPtr) UseStdAccessibleObjects(IntPtr) UseStdAccessibleObjects(IntPtr) UseStdAccessibleObjects(IntPtr)

Asocia un objeto a una instancia de un objeto AccessibleObject basándose en el controlador del objeto.Associates an object with an instance of an AccessibleObject based on the handle of the object.

UseStdAccessibleObjects(IntPtr, Int32) UseStdAccessibleObjects(IntPtr, Int32) UseStdAccessibleObjects(IntPtr, Int32) UseStdAccessibleObjects(IntPtr, Int32)

Asocia un objeto a una instancia de un objeto AccessibleObject basándose en el controlador y el identificador del objeto.Associates an object with an instance of an AccessibleObject based on the handle and the object id of the object.

Implementaciones de interfaz explícitas

IAccessible.accChildCount IAccessible.accChildCount IAccessible.accChildCount IAccessible.accChildCount

Obtiene el número de interfaces secundarias que pertenecen a este objeto.Gets the number of child interfaces that belong to this object. Para obtener una descripción de este miembro, vea accChildCount.For a description of this member, see accChildCount.

IAccessible.accDoDefaultAction(Object) IAccessible.accDoDefaultAction(Object) IAccessible.accDoDefaultAction(Object) IAccessible.accDoDefaultAction(Object)

Realiza la acción predeterminada del objeto especificado.Performs the specified object's default action. No todos los objetos tienen una acción predeterminada.Not all objects have a default action. Para obtener una descripción de este miembro, vea accDoDefaultAction(Object).For a description of this member, see accDoDefaultAction(Object).

IAccessible.accFocus IAccessible.accFocus IAccessible.accFocus IAccessible.accFocus

Obtiene el objeto que tiene el foco de teclado.Gets the object that has the keyboard focus. Para obtener una descripción de este miembro, vea accFocus.For a description of this member, see accFocus.

IAccessible.accHitTest(Int32, Int32) IAccessible.accHitTest(Int32, Int32) IAccessible.accHitTest(Int32, Int32) IAccessible.accHitTest(Int32, Int32)

Obtiene el objeto secundario que se encuentra en las coordenadas de pantalla especificadas.Gets the child object at the specified screen coordinates. Para obtener una descripción de este miembro, vea accHitTest(Int32, Int32).For a description of this member, see accHitTest(Int32, Int32).

IAccessible.accLocation(Int32, Int32, Int32, Int32, Object) IAccessible.accLocation(Int32, Int32, Int32, Int32, Object) IAccessible.accLocation(Int32, Int32, Int32, Int32, Object) IAccessible.accLocation(Int32, Int32, Int32, Int32, Object)

Obtiene la ubicación de pantalla actual del objeto.Gets the object's current screen location. Para obtener una descripción de este miembro, vea accLocation(Int32, Int32, Int32, Int32, Object).For a description of this member, see accLocation(Int32, Int32, Int32, Int32, Object).

IAccessible.accNavigate(Int32, Object) IAccessible.accNavigate(Int32, Object) IAccessible.accNavigate(Int32, Object) IAccessible.accNavigate(Int32, Object)

Navega a un objeto accesible relativo al objeto actual.Navigates to an accessible object relative to the current object. Para obtener una descripción de este miembro, vea accNavigate(Int32, Object).For a description of this member, see accNavigate(Int32, Object).

IAccessible.accParent IAccessible.accParent IAccessible.accParent IAccessible.accParent

Obtiene el objeto accesible primario de este objeto.Gets the parent accessible object of this object. Para obtener una descripción de este miembro, vea accParent.For a description of this member, see accParent.

IAccessible.accSelect(Int32, Object) IAccessible.accSelect(Int32, Object) IAccessible.accSelect(Int32, Object) IAccessible.accSelect(Int32, Object)

Modifica la selección o desplaza el foco de teclado del objeto accesible.Modifies the selection or moves the keyboard focus of the accessible object. Para obtener una descripción de este miembro, vea accSelect(Int32, Object).For a description of this member, see accSelect(Int32, Object).

IAccessible.accSelection IAccessible.accSelection IAccessible.accSelection IAccessible.accSelection

Obtiene los objetos secundarios seleccionados de un objeto accesible.Gets the selected child objects of an accessible object. Para obtener una descripción de este miembro, vea accSelection.For a description of this member, see accSelection.

IAccessible.get_accChild(Object) IAccessible.get_accChild(Object) IAccessible.get_accChild(Object) IAccessible.get_accChild(Object)

Recupera un objeto secundario especificado.Retrieves a specified child object.

IAccessible.get_accDefaultAction(Object) IAccessible.get_accDefaultAction(Object) IAccessible.get_accDefaultAction(Object) IAccessible.get_accDefaultAction(Object)

Devuelve una cadena que indica la acción predeterminada del objeto especificado.Returns a string that indicates the specified object's default action.

IAccessible.get_accDescription(Object) IAccessible.get_accDescription(Object) IAccessible.get_accDescription(Object) IAccessible.get_accDescription(Object)

Devuelve una cadena que describe la apariencia visual del objeto accesible especificado.Returns a string that describes the visual appearance of the specified accessible object.

IAccessible.get_accHelp(Object) IAccessible.get_accHelp(Object) IAccessible.get_accHelp(Object) IAccessible.get_accHelp(Object)

Recupera la ruta de acceso completa del archivo WinHelp asociado con el objeto accesible especificado.Retrieves the full path of the WinHelp file that is associated with the specified accessible object.

IAccessible.get_accHelpTopic(String, Object) IAccessible.get_accHelpTopic(String, Object) IAccessible.get_accHelpTopic(String, Object) IAccessible.get_accHelpTopic(String, Object)

Recupera la ruta de acceso completa de un archivo WinHelp asociado con el objeto especificado, junto con el identificador de un tema específico en el archivo.Retrives the full path of a WinHelp file that is associated with the specified object along with the identifier of a specific topic in the file.

IAccessible.get_accKeyboardShortcut(Object) IAccessible.get_accKeyboardShortcut(Object) IAccessible.get_accKeyboardShortcut(Object) IAccessible.get_accKeyboardShortcut(Object)

Recupera la clave de acceso o el método abreviado de teclado del objeto especificado.Retrieves the specified object's keyboard shortcut or access key.

IAccessible.get_accName(Object) IAccessible.get_accName(Object) IAccessible.get_accName(Object) IAccessible.get_accName(Object)

Recupera el nombre del objeto especificado.Retrieves the name of the specified object.

IAccessible.get_accRole(Object) IAccessible.get_accRole(Object) IAccessible.get_accRole(Object) IAccessible.get_accRole(Object)

Recupera información que describe el rol del objeto especificado.Retrieves information that describes the role of the specified object.

IAccessible.get_accState(Object) IAccessible.get_accState(Object) IAccessible.get_accState(Object) IAccessible.get_accState(Object)

Recupera el estado actual del objeto accesible especificado.Retrieves the current state of the specified accessible object.

IAccessible.get_accValue(Object) IAccessible.get_accValue(Object) IAccessible.get_accValue(Object) IAccessible.get_accValue(Object)

Recupera el valor del objeto accesible especificado.Retrieves the value of the specified accessible object. No todos los objetos tienen un valor.Not all objects have a value.

IAccessible.set_accName(Object, String) IAccessible.set_accName(Object, String) IAccessible.set_accName(Object, String) IAccessible.set_accName(Object, String)

Asigna un nuevo nombre al objeto accesible especificado.Assigns a new name to the specified accessible object.

IAccessible.set_accValue(Object, String) IAccessible.set_accValue(Object, String) IAccessible.set_accValue(Object, String) IAccessible.set_accValue(Object, String)

Asigna un nuevo valor al objeto accesible especificado.Assigns a new value to the specified accessible object.

IReflect.GetField(String, BindingFlags) IReflect.GetField(String, BindingFlags) IReflect.GetField(String, BindingFlags) IReflect.GetField(String, BindingFlags)

Obtiene el objeto FieldInfo correspondiente al campo y al marcador de enlace especificados.Gets the FieldInfo object corresponding to the specified field and binding flag. Para obtener una descripción de este miembro, vea GetField(String, BindingFlags).For a description of this member, see GetField(String, BindingFlags).

IReflect.GetFields(BindingFlags) IReflect.GetFields(BindingFlags) IReflect.GetFields(BindingFlags) IReflect.GetFields(BindingFlags)

Obtiene una matriz de objetos FieldInfo correspondientes a todos los campos de la clase actual.Gets an array of FieldInfo objects corresponding to all fields of the current class. Para obtener una descripción de este miembro, vea GetFields(BindingFlags).For a description of this member, see GetFields(BindingFlags).

IReflect.GetMember(String, BindingFlags) IReflect.GetMember(String, BindingFlags) IReflect.GetMember(String, BindingFlags) IReflect.GetMember(String, BindingFlags)

Obtiene una matriz de objetos MemberInfo correspondientes a todos los miembros públicos o a todos los miembros que coincidan con un nombre especificado.Gets an array of MemberInfo objects corresponding to all public members or to all members that match a specified name. Para obtener una descripción de este miembro, vea GetMember(String, BindingFlags).For a description of this member, see GetMember(String, BindingFlags).

IReflect.GetMembers(BindingFlags) IReflect.GetMembers(BindingFlags) IReflect.GetMembers(BindingFlags) IReflect.GetMembers(BindingFlags)

Obtiene una matriz de objetos MemberInfo correspondientes a todos los miembros públicos o a todos los miembros de la clase actual.Gets an array of MemberInfo objects corresponding either to all public members or to all members of the current class. Para obtener una descripción de este miembro, vea GetMembers(BindingFlags).For a description of this member, see GetMembers(BindingFlags).

IReflect.GetMethod(String, BindingFlags) IReflect.GetMethod(String, BindingFlags) IReflect.GetMethod(String, BindingFlags) IReflect.GetMethod(String, BindingFlags)

Obtiene un objeto MethodInfo correspondiente a un método especificado con unas restricciones de búsqueda especificadas.Gets a MethodInfo object corresponding to a specified method under specified search constraints. Para obtener una descripción de este miembro, vea GetMethod(String, BindingFlags).For a description of this member, see GetMethod(String, BindingFlags).

IReflect.GetMethod(String, BindingFlags, Binder, Type[], ParameterModifier[]) IReflect.GetMethod(String, BindingFlags, Binder, Type[], ParameterModifier[]) IReflect.GetMethod(String, BindingFlags, Binder, Type[], ParameterModifier[]) IReflect.GetMethod(String, BindingFlags, Binder, Type[], ParameterModifier[])

Obtiene un objeto MethodInfo correspondiente a un método especificado, utilizando una matriz Type para elegir entre varios métodos sobrecargados.Gets a MethodInfo object corresponding to a specified method, using a Type array to choose from among overloaded methods. Para obtener una descripción de este miembro, vea GetMethod(String, BindingFlags, Binder, Type[], ParameterModifier[]).For a description of this member, see GetMethod(String, BindingFlags, Binder, Type[], ParameterModifier[]).

IReflect.GetMethods(BindingFlags) IReflect.GetMethods(BindingFlags) IReflect.GetMethods(BindingFlags) IReflect.GetMethods(BindingFlags)

Obtiene una matriz de objetos MethodInfo con todos los métodos públicos o todos los métodos de la clase actual.Gets an array of MethodInfo objects with all public methods or all methods of the current class. Para obtener una descripción de este miembro, vea GetMethods(BindingFlags).For a description of this member, see GetMethods(BindingFlags).

IReflect.GetProperties(BindingFlags) IReflect.GetProperties(BindingFlags) IReflect.GetProperties(BindingFlags) IReflect.GetProperties(BindingFlags)

Obtiene una matriz de objetos PropertyInfo correspondientes a todas las propiedades públicas o a todas las propiedades de la clase actual.Gets an array of PropertyInfo objects corresponding to all public properties or to all properties of the current class. Para obtener una descripción de este miembro, vea GetProperties(BindingFlags).For a description of this member, see GetProperties(BindingFlags).

IReflect.GetProperty(String, BindingFlags) IReflect.GetProperty(String, BindingFlags) IReflect.GetProperty(String, BindingFlags) IReflect.GetProperty(String, BindingFlags)

Obtiene un objeto PropertyInfo correspondiente a una propiedad especificada con unas restricciones de búsqueda especificadas.Gets a PropertyInfo object corresponding to a specified property under specified search constraints. Para obtener una descripción de este miembro, vea GetProperty(String, BindingFlags).For a description of this member, see GetProperty(String, BindingFlags).

IReflect.GetProperty(String, BindingFlags, Binder, Type, Type[], ParameterModifier[]) IReflect.GetProperty(String, BindingFlags, Binder, Type, Type[], ParameterModifier[]) IReflect.GetProperty(String, BindingFlags, Binder, Type, Type[], ParameterModifier[]) IReflect.GetProperty(String, BindingFlags, Binder, Type, Type[], ParameterModifier[])

Obtiene un objeto PropertyInfo correspondiente a una propiedad especificada con unas determinadas restricciones de búsqueda.Gets a PropertyInfo object corresponding to a specified property with specified search constraints. Para obtener una descripción de este miembro, vea GetProperty(String, BindingFlags, Binder, Type, Type[], ParameterModifier[]).For a description of this member, see GetProperty(String, BindingFlags, Binder, Type, Type[], ParameterModifier[]).

IReflect.InvokeMember(String, BindingFlags, Binder, Object, Object[], ParameterModifier[], CultureInfo, String[]) IReflect.InvokeMember(String, BindingFlags, Binder, Object, Object[], ParameterModifier[], CultureInfo, String[]) IReflect.InvokeMember(String, BindingFlags, Binder, Object, Object[], ParameterModifier[], CultureInfo, String[]) IReflect.InvokeMember(String, BindingFlags, Binder, Object, Object[], ParameterModifier[], CultureInfo, String[])

Invoca el miembro especificado.Invokes a specified member. Para obtener una descripción de este miembro, vea InvokeMember(String, BindingFlags, Binder, Object, Object[], ParameterModifier[], CultureInfo, String[]).For a description of this member, see InvokeMember(String, BindingFlags, Binder, Object, Object[], ParameterModifier[], CultureInfo, String[]).

IReflect.UnderlyingSystemType IReflect.UnderlyingSystemType IReflect.UnderlyingSystemType IReflect.UnderlyingSystemType

Obtiene el tipo subyacente que representa el objeto IReflect.Gets the underlying type that represents the IReflect object. Para obtener una descripción de este miembro, vea UnderlyingSystemType.For a description of this member, see UnderlyingSystemType.

Se aplica a