Set-CMTSStepPrestartCheck
Configure una instancia del paso de secuencia de tareas Comprobar preparación .
Syntax
Set-CMTSStepPrestartCheck
[-CheckCMClientMinVersion <Boolean>]
[-CheckMaxOSVersion <Boolean>]
[-CheckMemory <Boolean>]
[-CheckMinOSVersion <Boolean>]
[-CheckNetworkConnected <Boolean>]
[-CheckNetworkWired <Boolean>]
[-CheckTpmEnabled <Boolean>]
[-CheckTpmActivated <Boolean>]
[-CheckOS <Boolean>]
[-CheckOSArchitecture <Boolean>]
[-CheckOSLanguageId <Boolean>]
[-CheckPowerState <Boolean>]
[-CheckSpace <Boolean>]
[-CheckSpeed <Boolean>]
[-CheckUefi <Boolean>]
[-CMClientMinVersion <String>]
[-DiskSpace <Int32>]
[-MaxOSVersion <String>]
[-Memory <Int32>]
[-MinOSVersion <String>]
[-OS <OSType>]
[-OSArchitecture <OSArch>]
[-OSLanguageId <Int32>]
[-Speed <Int32>]
[-AddCondition <IResultObject[]>]
[-ClearCondition]
[-Description <String>]
-InputObject <IResultObject>
[-IsContinueOnError <Boolean>]
[-IsEnabled <Boolean>]
[-MoveToIndex <Int32>]
[-NewStepName <String>]
[-RemoveConditionFile]
[-RemoveConditionFolder]
[-RemoveConditionIfStatement]
[-RemoveConditionOperatingSystem]
[-RemoveConditionQueryWmi]
[-RemoveConditionRegistry]
[-RemoveConditionSoftware]
[-RemoveConditionVariable]
[-StepName <String>]
[-StepOrder <ReorderType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepPrestartCheck
[-CheckCMClientMinVersion <Boolean>]
[-CheckMaxOSVersion <Boolean>]
[-CheckMemory <Boolean>]
[-CheckMinOSVersion <Boolean>]
[-CheckNetworkConnected <Boolean>]
[-CheckNetworkWired <Boolean>]
[-CheckTpmEnabled <Boolean>]
[-CheckTpmActivated <Boolean>]
[-CheckOS <Boolean>]
[-CheckOSArchitecture <Boolean>]
[-CheckOSLanguageId <Boolean>]
[-CheckPowerState <Boolean>]
[-CheckSpace <Boolean>]
[-CheckSpeed <Boolean>]
[-CheckUefi <Boolean>]
[-CMClientMinVersion <String>]
[-DiskSpace <Int32>]
[-MaxOSVersion <String>]
[-Memory <Int32>]
[-MinOSVersion <String>]
[-OS <OSType>]
[-OSArchitecture <OSArch>]
[-OSLanguageId <Int32>]
[-Speed <Int32>]
[-AddCondition <IResultObject[]>]
[-ClearCondition]
[-Description <String>]
[-IsContinueOnError <Boolean>]
[-IsEnabled <Boolean>]
[-MoveToIndex <Int32>]
[-NewStepName <String>]
[-RemoveConditionFile]
[-RemoveConditionFolder]
[-RemoveConditionIfStatement]
[-RemoveConditionOperatingSystem]
[-RemoveConditionQueryWmi]
[-RemoveConditionRegistry]
[-RemoveConditionSoftware]
[-RemoveConditionVariable]
[-StepName <String>]
[-StepOrder <ReorderType>]
-TaskSequenceId <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepPrestartCheck
[-CheckCMClientMinVersion <Boolean>]
[-CheckMaxOSVersion <Boolean>]
[-CheckMemory <Boolean>]
[-CheckMinOSVersion <Boolean>]
[-CheckNetworkConnected <Boolean>]
[-CheckNetworkWired <Boolean>]
[-CheckTpmEnabled <Boolean>]
[-CheckTpmActivated <Boolean>]
[-CheckOS <Boolean>]
[-CheckOSArchitecture <Boolean>]
[-CheckOSLanguageId <Boolean>]
[-CheckPowerState <Boolean>]
[-CheckSpace <Boolean>]
[-CheckSpeed <Boolean>]
[-CheckUefi <Boolean>]
[-CMClientMinVersion <String>]
[-DiskSpace <Int32>]
[-MaxOSVersion <String>]
[-Memory <Int32>]
[-MinOSVersion <String>]
[-OS <OSType>]
[-OSArchitecture <OSArch>]
[-OSLanguageId <Int32>]
[-Speed <Int32>]
[-AddCondition <IResultObject[]>]
[-ClearCondition]
[-Description <String>]
[-IsContinueOnError <Boolean>]
[-IsEnabled <Boolean>]
[-MoveToIndex <Int32>]
[-NewStepName <String>]
[-RemoveConditionFile]
[-RemoveConditionFolder]
[-RemoveConditionIfStatement]
[-RemoveConditionOperatingSystem]
[-RemoveConditionQueryWmi]
[-RemoveConditionRegistry]
[-RemoveConditionSoftware]
[-RemoveConditionVariable]
[-StepName <String>]
[-StepOrder <ReorderType>]
-TaskSequenceName <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepPrestartCheck
[-Condition <IResultObject[]>]
[-SetConditionIfStatement]
[-StatementType <ConditionStatementType>]
[-StepName <String>]
-TaskSequenceId <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepPrestartCheck
[-Condition <IResultObject[]>]
[-SetConditionIfStatement]
[-StatementType <ConditionStatementType>]
[-StepName <String>]
-TaskSequenceName <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepPrestartCheck
[-Condition <IResultObject[]>]
-InputObject <IResultObject>
[-SetConditionIfStatement]
[-StatementType <ConditionStatementType>]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepPrestartCheck
[-ConditionVariableName <String>]
[-ConditionVariableValue <String>]
[-OperatorType <VariableOperatorType>]
[-SetConditionVariable]
[-StepName <String>]
-TaskSequenceId <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepPrestartCheck
[-ConditionVariableName <String>]
[-ConditionVariableValue <String>]
[-OperatorType <VariableOperatorType>]
[-SetConditionVariable]
[-StepName <String>]
-TaskSequenceName <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepPrestartCheck
[-ConditionVariableName <String>]
[-ConditionVariableValue <String>]
-InputObject <IResultObject>
[-OperatorType <VariableOperatorType>]
[-SetConditionVariable]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepPrestartCheck
[-FileDateTimeOperator <VariableOperatorType>]
[-FilePath <String>]
[-FileTimestamp <DateTime>]
[-FileVersion <String>]
[-SetConditionFile]
[-StepName <String>]
-TaskSequenceId <String>
[-VersionOperator <VariableOperatorType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepPrestartCheck
[-FileDateTimeOperator <VariableOperatorType>]
[-FilePath <String>]
[-FileTimestamp <DateTime>]
[-FileVersion <String>]
[-SetConditionFile]
[-StepName <String>]
-TaskSequenceName <String>
[-VersionOperator <VariableOperatorType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepPrestartCheck
[-FileDateTimeOperator <VariableOperatorType>]
[-FilePath <String>]
[-FileTimestamp <DateTime>]
[-FileVersion <String>]
-InputObject <IResultObject>
[-SetConditionFile]
[-StepName <String>]
[-VersionOperator <VariableOperatorType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepPrestartCheck
[-FolderDateTimeOperator <VariableOperatorType>]
[-FolderPath <String>]
[-FolderTimestamp <DateTime>]
[-SetConditionFolder]
[-StepName <String>]
-TaskSequenceId <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepPrestartCheck
[-FolderDateTimeOperator <VariableOperatorType>]
[-FolderPath <String>]
[-FolderTimestamp <DateTime>]
[-SetConditionFolder]
[-StepName <String>]
-TaskSequenceName <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepPrestartCheck
[-FolderDateTimeOperator <VariableOperatorType>]
[-FolderPath <String>]
[-FolderTimestamp <DateTime>]
-InputObject <IResultObject>
[-SetConditionFolder]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepPrestartCheck
-InputObject <IResultObject>
[-Namespace <String[]>]
[-Query <String>]
[-SetConditionQueryWmi]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepPrestartCheck
-InputObject <IResultObject>
[-SetConditionOperatingSystem]
[-StepName <String>]
[-SupportedPlatform <IResultObject[]>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepPrestartCheck
-InputObject <IResultObject>
[-RegistryKey <String>]
[-RegistryOperator <VariableOperatorType>]
[-RegistryValueData <String>]
[-RegistryValueName <String>]
[-RootKey <RegistryRootKeyType>]
[-SetConditionRegistry]
[-StepName <String>]
[-ValueType <RegistryValueType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepPrestartCheck
-InputObject <IResultObject>
[-IsAnyVersion <Boolean>]
[-MsiFilePath <String>]
[-SetConditionSoftware]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepPrestartCheck
[-IsAnyVersion <Boolean>]
[-MsiFilePath <String>]
[-SetConditionSoftware]
[-StepName <String>]
-TaskSequenceId <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepPrestartCheck
[-IsAnyVersion <Boolean>]
[-MsiFilePath <String>]
[-SetConditionSoftware]
[-StepName <String>]
-TaskSequenceName <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepPrestartCheck
[-Namespace <String[]>]
[-Query <String>]
[-SetConditionQueryWmi]
[-StepName <String>]
-TaskSequenceId <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepPrestartCheck
[-Namespace <String[]>]
[-Query <String>]
[-SetConditionQueryWmi]
[-StepName <String>]
-TaskSequenceName <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepPrestartCheck
[-RegistryKey <String>]
[-RegistryOperator <VariableOperatorType>]
[-RegistryValueData <String>]
[-RegistryValueName <String>]
[-RootKey <RegistryRootKeyType>]
[-SetConditionRegistry]
[-StepName <String>]
-TaskSequenceId <String>
[-ValueType <RegistryValueType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepPrestartCheck
[-RegistryKey <String>]
[-RegistryOperator <VariableOperatorType>]
[-RegistryValueData <String>]
[-RegistryValueName <String>]
[-RootKey <RegistryRootKeyType>]
[-SetConditionRegistry]
[-StepName <String>]
-TaskSequenceName <String>
[-ValueType <RegistryValueType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepPrestartCheck
[-SetConditionOperatingSystem]
[-StepName <String>]
[-SupportedPlatform <IResultObject[]>]
-TaskSequenceId <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepPrestartCheck
[-SetConditionOperatingSystem]
[-StepName <String>]
[-SupportedPlatform <IResultObject[]>]
-TaskSequenceName <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
Use este cmdlet para configurar una instancia del paso de secuencia de tareas Check Readiness .
Para obtener más información sobre este paso, vea Acerca de los pasos de secuencia de tareas: Comprobar preparación.
Nota:
Ejecute cmdlets de Configuration Manager desde la unidad de sitio Configuration Manager, por ejemploPS XYZ:\>. Para obtener más información, consulte Introducción.
Ejemplos
Ejemplo 1
En este ejemplo se cambia el paso Comprobar preparación de la secuencia de tareas de implementación del sistema operativo predeterminado para deshabilitar las comprobaciones de alimentación de CA y red cableada.
$tsNameOsd = "Default OS deployment"
$tsStepNameCheckReady = "Check Readiness"
Set-CMTSStepPrestartCheck -TaskSequenceName $tsNameOsd -StepName $tsStepNameCheckReady -CheckPowerState $false -CheckNetworkWired $falseParámetros
-AddCondition
Especifique un objeto de condición que se va a agregar a este paso. Para obtener este objeto, use uno de los cmdlets de condición de secuencia de tareas. Por ejemplo, Get-CMTSStepConditionVariable.
| Type: | IResultObject[] |
| Aliases: | AddConditions |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CheckCMClientMinVersion
Establezca este parámetro $true en para habilitar la comprobación de la versión mínima del cliente . Use el parámetro CMClientMinVersion para establecer el número de versión de cliente específico.
| Type: | Boolean |
| Aliases: | CheckClientMinVersion |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CheckMaxOSVersion
Establezca este parámetro $true en para habilitar la comprobación de la versión máxima del sistema operativo . Use el parámetro MaxOSVersion para establecer el número de versión del sistema operativo específico.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CheckMemory
Establezca este parámetro $true en para habilitar la comprobación memoria mínima (MB). Use el parámetro Memory para establecer el tamaño de memoria específico.
| Type: | Boolean |
| Aliases: | EnableCheckMemory |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CheckMinOSVersion
Establezca este parámetro $true en para habilitar la comprobación de versión mínima del sistema operativo . Use el parámetro MinOSVersion para establecer el número de versión del sistema operativo específico.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CheckNetworkConnected
Establezca este parámetro $true en para habilitar la comprobación de conexión del adaptador de red .
| Type: | Boolean |
| Aliases: | NetworkConnected |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CheckNetworkWired
Establezca este parámetro $true en para habilitar el adaptador de red no es una comprobación inalámbrica.
| Type: | Boolean |
| Aliases: | NetworkWired |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CheckOS
Establezca este parámetro $true en para habilitar la comprobación del tipo de sistema operativo, ya sea cliente o servidor. Use el sistema operativo del parámetro para establecer el tipo de sistema operativo específico.
| Type: | Boolean |
| Aliases: | EnableCheckOSType |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CheckOSArchitecture
Establezca este parámetro $true en para habilitar la comprobación de arquitectura del sistema operativo actual . Use el parámetro OSArchitecture para establecer el tipo de arquitectura específico.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CheckOSLanguageId
Establezca este parámetro $true en para habilitar la comprobación del idioma del sistema operativo actual. Use el parámetro OSLanguageID para establecer el idioma específico.
| Type: | Boolean |
| Aliases: | EnableCheckOSLanguageId |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CheckPowerState
Establezca este parámetro $true en para habilitar la alimentación de CA conectada.
| Type: | Boolean |
| Aliases: | NotBattery |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CheckSpace
Establezca este parámetro $true en para habilitar la comprobación Mínimo de espacio libre en disco (MB ). Use el parámetro DiskSpace para establecer el tamaño específico.
| Type: | Boolean |
| Aliases: | EnableCheckFreeDiskSpace |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CheckSpeed
Establezca este parámetro $true en para habilitar la comprobación velocidad mínima del procesador (MHz ). Use el parámetro Speed para establecer la velocidad específica.
| Type: | Boolean |
| Aliases: | EnableCheckProcessorSpeed |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CheckTpmActivated
Se aplica a la versión 2111 y versiones posteriores. Establezca este parámetro $true en para habilitar la comprobación de TPM 2.0 o posterior .
| Type: | Boolean |
| Aliases: | TpmActivated |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CheckTpmEnabled
Se aplica a la versión 2111 y versiones posteriores. Establezca este parámetro $true en para habilitar la comprobación de TPM 2.0 o posterior .
| Type: | Boolean |
| Aliases: | TpmEnabled |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CheckUefi
Se aplica a la versión 2006 y posteriores. Establezca este parámetro $true en para habilitar que el equipo esté en la comprobación del modo UEFI .
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ClearCondition
Quite una condición de este paso. Use el parámetro -Condition para especificar la condición que se va a quitar.
| Type: | SwitchParameter |
| Aliases: | ClearConditions |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CMClientMinVersion
Use este parámetro para configurar la versión de cliente específica. Especifique la versión del cliente en el formato siguiente: 5.00.8913.1005. Use el parámetro CheckCMClientMinVersion para habilitar o deshabilitar la comprobación.
| Type: | String |
| Aliases: | ClientMinVersion |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Condition
Especifique un objeto de condición que se usará con este paso. Para obtener este objeto, use uno de los cmdlets de condición de secuencia de tareas. Por ejemplo, Get-CMTSStepConditionVariable.
| Type: | IResultObject[] |
| Aliases: | SubCondition, SubConditions |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ConditionVariableName
Especifique el nombre de la variable de secuencia de tareas que se usará como condición.
| Type: | String |
| Aliases: | Variable |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ConditionVariableValue
Especifique el valor de la variable de secuencia de tareas que se usará en una condición.
| Type: | String |
| Aliases: | Value |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Solicitará confirmación antes de ejecutar el cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Description
Especifique una descripción opcional para este paso de secuencia de tareas.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableWildcardHandling
Este parámetro trata los caracteres comodín como valores de caracteres literales. No se puede combinar con ForceWildcardHandling.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DiskSpace
Use este parámetro para configurar el tamaño específico de la comprobación mínima de espacio libre en disco. Especifique un valor entero para el tamaño en MB. Use el parámetro CheckSpace para habilitar o deshabilitar la comprobación.
| Type: | Int32 |
| Aliases: | MinimumFreeDiskSpace |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FileDateTimeOperator
Especifique un tipo de operador de variable para una condición de fecha y hora del archivo.
| Type: | VariableOperatorType |
| Accepted values: | Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FilePath
Especifique la ruta de acceso para una condición de archivo.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FileTimestamp
Especifique un valor de fecha y hora que se usará para una condición de archivo.
| Type: | DateTime |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FileVersion
Especifique una cadena de versión para una condición de archivo.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FolderDateTimeOperator
Especifique un operador de variable para una condición de fecha y hora de carpeta.
| Type: | VariableOperatorType |
| Accepted values: | Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FolderPath
Especifique la ruta de acceso para una condición de carpeta.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FolderTimestamp
Especifique un valor de fecha y hora que se usará para una condición de carpeta.
| Type: | DateTime |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ForceWildcardHandling
Este parámetro procesa caracteres comodín y puede provocar un comportamiento inesperado (no recomendado). No se puede combinar con DisableWildcardHandling.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-InputObject
Especifique un objeto de secuencia de tareas desde el que obtener el paso Comprobar preparación . Para obtener este objeto, use el cmdlet Get-CMTaskSequence .
| Type: | IResultObject |
| Aliases: | TaskSequence |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IsAnyVersion
Use este parámetro con el parámetro SetConditionSoftware para que coincida con cualquier versión del producto.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IsContinueOnError
Use este parámetro para habilitar la opción de paso Continuar en caso de error. Al habilitar esta opción, si se produce un error en el paso, la secuencia de tareas continúa.
| Type: | Boolean |
| Aliases: | IsThisStepContinueOnError |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IsEnabled
Use este parámetro para habilitar este paso de secuencia de tareas.
| Type: | Boolean |
| Aliases: | IsThisStepEnabled |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MaxOSVersion
Use este parámetro para configurar la versión específica del sistema operativo. Especifique la versión máxima del sistema operativo con la versión principal, la versión secundaria y el número de compilación. Por ejemplo, 10.0.18356. Use el parámetro CheckMaxOSVersion para habilitar o deshabilitar la comprobación.
| Type: | String |
| Aliases: | CurrentMaxOSVersion |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Memory
Use este parámetro para configurar el tamaño específico de la comprobación de memoria mínima. Especifique un valor entero para el tamaño en MB. Use el parámetro CheckMemory para habilitar o deshabilitar la comprobación.
| Type: | Int32 |
| Aliases: | MinimumMemory |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MinOSVersion
Use este parámetro para configurar la versión específica del sistema operativo. Especifique la versión mínima del sistema operativo con la versión principal, la versión secundaria y el número de compilación. Por ejemplo, 10.0.16299. Use el parámetro CheckMinOSVersion para habilitar o deshabilitar la comprobación.
| Type: | String |
| Aliases: | CurrentMinOSVersion |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MoveToIndex
Mueva este paso a la posición de índice especificada en la secuencia de tareas.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MsiFilePath
Especifique la ruta de acceso a un archivo de Windows Installer para una condición de software.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Namespace
Especifique el espacio de nombres para una condición de consulta WMI.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-NewStepName
Use este parámetro para cambiar el nombre de este paso de secuencia de tareas.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-OperatorType
Especifique un operador que se usará con una condición de variable de secuencia de tareas.
| Type: | VariableOperatorType |
| Accepted values: | Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual, Like, NotLike |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-OS
Use este parámetro para configurar el tipo de sistema operativo específico: Client o Server. Use el parámetro CheckOS para habilitar o deshabilitar la comprobación.
| Type: | OSType |
| Aliases: | CurrentOSType |
| Accepted values: | Client, Server |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-OSArchitecture
Use este parámetro para configurar la arquitectura específica del sistema operativo: Arch32 para 32 bits o Arch64 para 64 bits. Use el parámetro CheckOSArchitecture para habilitar o deshabilitar la comprobación.
| Type: | OSArch |
| Aliases: | CurrentOSArchitecture |
| Accepted values: | Arch32, Arch64 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-OSLanguageId
Use este parámetro para configurar el lenguaje del sistema operativo específico. Esta comprobación compara el identificador de idioma con la propiedad OSLanguage de la clase WMI de Win32_OperatingSystem en el cliente. Por ejemplo, 1033 para inglés (Estados Unidos). Use el parámetro CheckOSLanguageId para habilitar o deshabilitar la comprobación.
| Type: | Int32 |
| Aliases: | LanguageId |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Query
Especifique una cadena de consulta WMI que se usará para una condición.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RegistryKey
Especifique la clave que se va a usar con una condición del Registro.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RegistryOperator
Especifique un operador que se usará con una condición del Registro.
| Type: | VariableOperatorType |
| Accepted values: | Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RegistryValueData
Especifique los datos de valor que se usarán con una condición del Registro.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RegistryValueName
Especifique el nombre del valor que se usará con una condición del Registro.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionFile
Use este parámetro para quitar una condición de archivo.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionFolder
Use este parámetro para quitar una condición de carpeta.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionIfStatement
Use este parámetro para quitar una condición de if instrucción.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionOperatingSystem
Use este parámetro para quitar una condición del sistema operativo.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionQueryWmi
Use este parámetro para quitar una condición de consulta WMI.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionRegistry
Use este parámetro para quitar una condición del Registro.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionSoftware
Use este parámetro para quitar una condición de software.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionVariable
Use este parámetro para quitar una condición de variable de secuencia de tareas.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RootKey
Especifique la clave raíz que se usará con una condición del Registro.
| Type: | RegistryRootKeyType |
| Accepted values: | HKeyCurrentUser, HKeyLocalMachine, HKeyUsers, HKeyCurrentConfig |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionFile
Agregue una nueva condición de archivo.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionFolder
Agregue una nueva condición de carpeta.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionIfStatement
Agregue una nueva if condición de instrucción.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionOperatingSystem
Agregue una nueva condición del sistema operativo.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionQueryWmi
Agregue una nueva condición de consulta WMI.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionRegistry
Agregue una nueva condición del Registro.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionSoftware
Agregue una nueva condición de software.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionVariable
Agregue una nueva condición de variable de secuencia de tareas.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Speed
Use este parámetro para configurar la velocidad específica para la comprobación de velocidad mínima del procesador. Especifique un valor entero para la velocidad en MHz. Use el parámetro CheckSpeed para habilitar o deshabilitar la comprobación.
| Type: | Int32 |
| Aliases: | MinimumProcessorSpeed |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-StatementType
Establezca el tipo de una condición de if instrucción.
| Type: | ConditionStatementType |
| Aliases: | Operator |
| Accepted values: | All, Any, None |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-StepName
Especifique el nombre del paso que se va a seleccionar para los cambios.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-StepOrder
Use este parámetro para reordenar el paso en la secuencia de tareas.
| Type: | ReorderType |
| Accepted values: | MoveUp, MoveDown, MoveToIndex |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SupportedPlatform
Use este parámetro para especificar las plataformas de una condición del sistema operativo.
| Type: | IResultObject[] |
| Aliases: | SupportedPlatforms |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-TaskSequenceId
Especifique el identificador de paquete de la secuencia de tareas desde la que se va a obtener el paso Comprobar preparación . Este valor es un identificador de paquete estándar, por ejemplo XYZ00858.
| Type: | String |
| Aliases: | Id, TaskSequencePackageId |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-TaskSequenceName
Especifique el nombre de la secuencia de tareas de destino para los cambios.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ValueType
Especifique el tipo de valor de una condición del Registro.
| Type: | RegistryValueType |
| Accepted values: | RegistrySZ, RegistryExpandSZ, RegistryDWord |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-VersionOperator
Especifique un operador que se usará con una condición de archivo.
| Type: | VariableOperatorType |
| Accepted values: | Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Muestra lo que ocurriría si se ejecuta el cmdlet. El cmdlet no se ejecuta.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Entradas
Microsoft.ConfigurationManagement.ManagementProvider.IResultObject
Salidas
System.Object
Vínculos relacionados
Comentarios
Próximamente: A lo largo de 2024 iremos eliminando gradualmente GitHub Issues como mecanismo de comentarios sobre el contenido y lo sustituiremos por un nuevo sistema de comentarios. Para más información, vea: https://aka.ms/ContentUserFeedback.
Enviar y ver comentarios de