Set-CMTSStepRequestStateStore
Configure una instancia del paso de secuencia de tareas Almacén de estado de solicitud .
Syntax
Set-CMTSStepRequestStateStore
[-FallbackToAccount <Boolean>]
[-RequestOption <RequestType>]
[-RetryCount <Int32>]
[-RetryTime <Int32>]
[-AddCondition <IResultObject[]>]
[-ClearCondition]
[-Description <String>]
-InputObject <IResultObject>
[-IsContinueOnError <Boolean>]
[-IsEnabled <Boolean>]
[-MoveToIndex <Int32>]
[-NewStepName <String>]
[-RemoveConditionFile]
[-RemoveConditionFolder]
[-RemoveConditionIfStatement]
[-RemoveConditionOperatingSystem]
[-RemoveConditionQueryWmi]
[-RemoveConditionRegistry]
[-RemoveConditionSoftware]
[-RemoveConditionVariable]
[-StepName <String>]
[-StepOrder <ReorderType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepRequestStateStore
[-FallbackToAccount <Boolean>]
[-RequestOption <RequestType>]
[-RetryCount <Int32>]
[-RetryTime <Int32>]
[-AddCondition <IResultObject[]>]
[-ClearCondition]
[-Description <String>]
[-IsContinueOnError <Boolean>]
[-IsEnabled <Boolean>]
[-MoveToIndex <Int32>]
[-NewStepName <String>]
[-RemoveConditionFile]
[-RemoveConditionFolder]
[-RemoveConditionIfStatement]
[-RemoveConditionOperatingSystem]
[-RemoveConditionQueryWmi]
[-RemoveConditionRegistry]
[-RemoveConditionSoftware]
[-RemoveConditionVariable]
[-StepName <String>]
[-StepOrder <ReorderType>]
-TaskSequenceId <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepRequestStateStore
[-FallbackToAccount <Boolean>]
[-RequestOption <RequestType>]
[-RetryCount <Int32>]
[-RetryTime <Int32>]
[-AddCondition <IResultObject[]>]
[-ClearCondition]
[-Description <String>]
[-IsContinueOnError <Boolean>]
[-IsEnabled <Boolean>]
[-MoveToIndex <Int32>]
[-NewStepName <String>]
[-RemoveConditionFile]
[-RemoveConditionFolder]
[-RemoveConditionIfStatement]
[-RemoveConditionOperatingSystem]
[-RemoveConditionQueryWmi]
[-RemoveConditionRegistry]
[-RemoveConditionSoftware]
[-RemoveConditionVariable]
[-StepName <String>]
[-StepOrder <ReorderType>]
-TaskSequenceName <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepRequestStateStore
[-Condition <IResultObject[]>]
[-SetConditionIfStatement]
[-StatementType <ConditionStatementType>]
[-StepName <String>]
-TaskSequenceId <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepRequestStateStore
[-Condition <IResultObject[]>]
[-SetConditionIfStatement]
[-StatementType <ConditionStatementType>]
[-StepName <String>]
-TaskSequenceName <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepRequestStateStore
[-Condition <IResultObject[]>]
-InputObject <IResultObject>
[-SetConditionIfStatement]
[-StatementType <ConditionStatementType>]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepRequestStateStore
[-ConditionVariableName <String>]
[-ConditionVariableValue <String>]
[-OperatorType <VariableOperatorType>]
[-SetConditionVariable]
[-StepName <String>]
-TaskSequenceId <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepRequestStateStore
[-ConditionVariableName <String>]
[-ConditionVariableValue <String>]
[-OperatorType <VariableOperatorType>]
[-SetConditionVariable]
[-StepName <String>]
-TaskSequenceName <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepRequestStateStore
[-ConditionVariableName <String>]
[-ConditionVariableValue <String>]
-InputObject <IResultObject>
[-OperatorType <VariableOperatorType>]
[-SetConditionVariable]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepRequestStateStore
[-FileDateTimeOperator <VariableOperatorType>]
[-FilePath <String>]
[-FileTimestamp <DateTime>]
[-FileVersion <String>]
[-SetConditionFile]
[-StepName <String>]
-TaskSequenceId <String>
[-VersionOperator <VariableOperatorType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepRequestStateStore
[-FileDateTimeOperator <VariableOperatorType>]
[-FilePath <String>]
[-FileTimestamp <DateTime>]
[-FileVersion <String>]
[-SetConditionFile]
[-StepName <String>]
-TaskSequenceName <String>
[-VersionOperator <VariableOperatorType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepRequestStateStore
[-FileDateTimeOperator <VariableOperatorType>]
[-FilePath <String>]
[-FileTimestamp <DateTime>]
[-FileVersion <String>]
-InputObject <IResultObject>
[-SetConditionFile]
[-StepName <String>]
[-VersionOperator <VariableOperatorType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepRequestStateStore
[-FolderDateTimeOperator <VariableOperatorType>]
[-FolderPath <String>]
[-FolderTimestamp <DateTime>]
[-SetConditionFolder]
[-StepName <String>]
-TaskSequenceId <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepRequestStateStore
[-FolderDateTimeOperator <VariableOperatorType>]
[-FolderPath <String>]
[-FolderTimestamp <DateTime>]
[-SetConditionFolder]
[-StepName <String>]
-TaskSequenceName <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepRequestStateStore
[-FolderDateTimeOperator <VariableOperatorType>]
[-FolderPath <String>]
[-FolderTimestamp <DateTime>]
-InputObject <IResultObject>
[-SetConditionFolder]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepRequestStateStore
-InputObject <IResultObject>
[-Namespace <String[]>]
[-Query <String>]
[-SetConditionQueryWmi]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepRequestStateStore
-InputObject <IResultObject>
[-SetConditionOperatingSystem]
[-StepName <String>]
[-SupportedPlatform <IResultObject[]>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepRequestStateStore
-InputObject <IResultObject>
[-RegistryKey <String>]
[-RegistryOperator <VariableOperatorType>]
[-RegistryValueData <String>]
[-RegistryValueName <String>]
[-RootKey <RegistryRootKeyType>]
[-SetConditionRegistry]
[-StepName <String>]
[-ValueType <RegistryValueType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepRequestStateStore
-InputObject <IResultObject>
[-IsAnyVersion <Boolean>]
[-MsiFilePath <String>]
[-SetConditionSoftware]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepRequestStateStore
[-IsAnyVersion <Boolean>]
[-MsiFilePath <String>]
[-SetConditionSoftware]
[-StepName <String>]
-TaskSequenceId <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepRequestStateStore
[-IsAnyVersion <Boolean>]
[-MsiFilePath <String>]
[-SetConditionSoftware]
[-StepName <String>]
-TaskSequenceName <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepRequestStateStore
[-Namespace <String[]>]
[-Query <String>]
[-SetConditionQueryWmi]
[-StepName <String>]
-TaskSequenceId <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepRequestStateStore
[-Namespace <String[]>]
[-Query <String>]
[-SetConditionQueryWmi]
[-StepName <String>]
-TaskSequenceName <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepRequestStateStore
[-RegistryKey <String>]
[-RegistryOperator <VariableOperatorType>]
[-RegistryValueData <String>]
[-RegistryValueName <String>]
[-RootKey <RegistryRootKeyType>]
[-SetConditionRegistry]
[-StepName <String>]
-TaskSequenceId <String>
[-ValueType <RegistryValueType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepRequestStateStore
[-RegistryKey <String>]
[-RegistryOperator <VariableOperatorType>]
[-RegistryValueData <String>]
[-RegistryValueName <String>]
[-RootKey <RegistryRootKeyType>]
[-SetConditionRegistry]
[-StepName <String>]
-TaskSequenceName <String>
[-ValueType <RegistryValueType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepRequestStateStore
[-SetConditionOperatingSystem]
[-StepName <String>]
[-SupportedPlatform <IResultObject[]>]
-TaskSequenceId <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepRequestStateStore
[-SetConditionOperatingSystem]
[-StepName <String>]
[-SupportedPlatform <IResultObject[]>]
-TaskSequenceName <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
Use este cmdlet para configurar una instancia del paso de secuencia de tareas Almacén de estado de solicitud .
Para obtener más información sobre este paso, vea Acerca de los pasos de secuencia de tareas: Almacén de estado de solicitud.
Nota:
Ejecute cmdlets de Configuration Manager desde la unidad de sitio Configuration Manager, por ejemploPS XYZ:\>. Para obtener más información, consulte Introducción.
Ejemplos
Ejemplo 1
En este ejemplo se cambia el paso Almacén de estado de solicitud en la secuencia de tareas de implementación del sistema operativo predeterminado para que no use la cuenta de acceso a la red y aumente los reintentos.
$tsNameOsd = "Default OS deployment"
$tsStepNameRequestSMP = "Request State Store"
Set-CMTSStepRequestStateStore -TaskSequenceName $tsNameOsd -StepName $tsStepNameRequestSMP -FallbackToAccount $false -RetryCount 4 -RetryTime 90Parámetros
-AddCondition
Especifique un objeto de condición que se va a agregar a este paso. Para obtener este objeto, use uno de los cmdlets de condición de secuencia de tareas. Por ejemplo, Get-CMTSStepConditionVariable.
| Type: | IResultObject[] |
| Aliases: | AddConditions |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ClearCondition
Quite una condición de este paso. Use el parámetro -Condition para especificar la condición que se va a quitar.
| Type: | SwitchParameter |
| Aliases: | ClearConditions |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Condition
Especifique un objeto de condición que se usará con este paso. Para obtener este objeto, use uno de los cmdlets de condición de secuencia de tareas. Por ejemplo, Get-CMTSStepConditionVariable.
| Type: | IResultObject[] |
| Aliases: | SubCondition, SubConditions |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ConditionVariableName
Especifique el nombre de la variable de secuencia de tareas que se usará como condición.
| Type: | String |
| Aliases: | Variable |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ConditionVariableValue
Especifique el valor de la variable de secuencia de tareas que se usará en una condición.
| Type: | String |
| Aliases: | Value |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Solicitará confirmación antes de ejecutar el cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Description
Especifique una descripción opcional para este paso de secuencia de tareas.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableWildcardHandling
Este parámetro trata los caracteres comodín como valores de caracteres literales. No se puede combinar con ForceWildcardHandling.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FallbackToAccount
Al establecer este valor $trueen , si la secuencia de tareas no puede acceder al punto de migración de estado mediante la cuenta de equipo, usa las credenciales de la cuenta de acceso de red para conectarse. Esta opción es menos segura porque otros equipos podrían usar la cuenta de acceso de red para acceder al estado almacenado. Esta opción podría ser necesaria si el equipo de destino no está unido a un dominio.
Para obtener más información, consulte Cuenta de acceso de red.
| Type: | Boolean |
| Aliases: | FallbackToNaa |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FileDateTimeOperator
Especifique un tipo de operador de variable para una condición de fecha y hora del archivo.
| Type: | VariableOperatorType |
| Accepted values: | Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FilePath
Especifique la ruta de acceso para una condición de archivo.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FileTimestamp
Especifique un valor de fecha y hora que se usará para una condición de archivo.
| Type: | DateTime |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FileVersion
Especifique una cadena de versión para una condición de archivo.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FolderDateTimeOperator
Especifique un operador de variable para una condición de fecha y hora de carpeta.
| Type: | VariableOperatorType |
| Accepted values: | Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FolderPath
Especifique la ruta de acceso para una condición de carpeta.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FolderTimestamp
Especifique un valor de fecha y hora que se usará para una condición de carpeta.
| Type: | DateTime |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ForceWildcardHandling
Este parámetro procesa caracteres comodín y puede provocar un comportamiento inesperado (no recomendado). No se puede combinar con DisableWildcardHandling.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-InputObject
Especifique un objeto de secuencia de tareas desde el que obtener el paso Solicitar almacén de estado . Para obtener este objeto, use el cmdlet Get-CMTaskSequence .
| Type: | IResultObject |
| Aliases: | TaskSequence |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IsAnyVersion
Use este parámetro con el parámetro SetConditionSoftware para que coincida con cualquier versión del producto.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IsContinueOnError
Use este parámetro para habilitar la opción de paso Continuar en caso de error. Al habilitar esta opción, si se produce un error en el paso, la secuencia de tareas continúa.
| Type: | Boolean |
| Aliases: | IsThisStepContinueOnError |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IsEnabled
Use este parámetro para habilitar este paso de secuencia de tareas.
| Type: | Boolean |
| Aliases: | IsThisStepEnabled |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MoveToIndex
Mueva este paso a la posición de índice especificada en la secuencia de tareas.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MsiFilePath
Especifique la ruta de acceso a un archivo de Windows Installer para una condición de software.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Namespace
Especifique el espacio de nombres para una condición de consulta WMI.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-NewStepName
Use este parámetro para cambiar el nombre de este paso de secuencia de tareas.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-OperatorType
Especifique un operador que se usará con una condición de variable de secuencia de tareas.
| Type: | VariableOperatorType |
| Accepted values: | Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual, Like, NotLike |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Query
Especifique una cadena de consulta WMI que se usará para una condición.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RegistryKey
Especifique la clave que se va a usar con una condición del Registro.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RegistryOperator
Especifique un operador que se usará con una condición del Registro.
| Type: | VariableOperatorType |
| Accepted values: | Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RegistryValueData
Especifique los datos de valor que se usarán con una condición del Registro.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RegistryValueName
Especifique el nombre del valor que se usará con una condición del Registro.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionFile
Use este parámetro para quitar una condición de archivo.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionFolder
Use este parámetro para quitar una condición de carpeta.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionIfStatement
Use este parámetro para quitar una condición de if instrucción.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionOperatingSystem
Use este parámetro para quitar una condición del sistema operativo.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionQueryWmi
Use este parámetro para quitar una condición de consulta WMI.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionRegistry
Use este parámetro para quitar una condición del Registro.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionSoftware
Use este parámetro para quitar una condición de software.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionVariable
Use este parámetro para quitar una condición de variable de secuencia de tareas.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RequestOption
Especifique el motivo para solicitar acceso al punto de migración de estado:
Capture: captura del estado del equipo. Si el sitio de Configuration Manager tiene varios puntos de migración de estado activos, este paso busca un punto de migración de estado con espacio en disco disponible. La secuencia de tareas consulta el punto de administración para obtener una lista de puntos de migración de estado y, a continuación, evalúa cada uno hasta que encuentra uno que cumpla los requisitos mínimos.Restore: restaurar el estado desde otro equipo. Si hay varios puntos de migración de estado, este paso busca el punto de migración de estado que tiene el estado del equipo de destino.
| Type: | RequestType |
| Accepted values: | Capture, Restore |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RetryCount
Especifique el número de veces que este paso intenta encontrar un punto de migración de estado adecuado antes de que se produzca un error.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RetryTime
Especifique la cantidad de tiempo en segundos que espera el paso de secuencia de tareas entre reintentos.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RootKey
Especifique la clave raíz que se usará con una condición del Registro.
| Type: | RegistryRootKeyType |
| Accepted values: | HKeyCurrentUser, HKeyLocalMachine, HKeyUsers, HKeyCurrentConfig |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionFile
Agregue una nueva condición de archivo.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionFolder
Agregue una nueva condición de carpeta.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionIfStatement
Agregue una nueva if condición de instrucción.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionOperatingSystem
Agregue una nueva condición del sistema operativo.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionQueryWmi
Agregue una nueva condición de consulta WMI.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionRegistry
Agregue una nueva condición del Registro.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionSoftware
Agregue una nueva condición de software.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionVariable
Agregue una nueva condición de variable de secuencia de tareas.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-StatementType
Establezca el tipo de una condición de if instrucción.
| Type: | ConditionStatementType |
| Aliases: | Operator |
| Accepted values: | All, Any, None |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-StepName
Especifique el nombre del paso que se va a seleccionar para los cambios.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-StepOrder
Use este parámetro para reordenar el paso en la secuencia de tareas.
| Type: | ReorderType |
| Accepted values: | MoveUp, MoveDown, MoveToIndex |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SupportedPlatform
Use este parámetro para especificar las plataformas de una condición del sistema operativo.
| Type: | IResultObject[] |
| Aliases: | SupportedPlatforms |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-TaskSequenceId
Especifique el identificador de paquete de la secuencia de tareas desde la que se va a obtener el paso Solicitar almacén de estado . Este valor es un identificador de paquete estándar, por ejemplo XYZ00858.
| Type: | String |
| Aliases: | Id, TaskSequencePackageId |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-TaskSequenceName
Especifique el nombre de la secuencia de tareas de destino para los cambios.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ValueType
Especifique el tipo de valor de una condición del Registro.
| Type: | RegistryValueType |
| Accepted values: | RegistrySZ, RegistryExpandSZ, RegistryDWord |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-VersionOperator
Especifique un operador que se usará con una condición de archivo.
| Type: | VariableOperatorType |
| Accepted values: | Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Muestra lo que ocurriría si se ejecuta el cmdlet. El cmdlet no se ejecuta.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Entradas
Microsoft.ConfigurationManagement.ManagementProvider.IResultObject
Salidas
System.Object
Vínculos relacionados
Comentarios
Próximamente: A lo largo de 2024 iremos eliminando gradualmente GitHub Issues como mecanismo de comentarios sobre el contenido y lo sustituiremos por un nuevo sistema de comentarios. Para más información, vea: https://aka.ms/ContentUserFeedback.
Enviar y ver comentarios de