Set-CMTSStepInstallSoftware

Módulo:

ConfigurationManager

Configure una instancia del paso de secuencia de tareas Instalar paquete.

Syntax

Set-CMTSStepInstallSoftware
   [-BaseVariableName <String>]
   [-EnableContinueOnInstallError <Boolean>]
   [-Program <IResultObject>]
   [-AddCondition <IResultObject[]>]
   [-ClearCondition]
   [-Description <String>]
   -InputObject <IResultObject>
   [-IsContinueOnError <Boolean>]
   [-IsEnabled <Boolean>]
   [-MoveToIndex <Int32>]
   [-NewStepName <String>]
   [-RemoveConditionFile]
   [-RemoveConditionFolder]
   [-RemoveConditionIfStatement]
   [-RemoveConditionOperatingSystem]
   [-RemoveConditionQueryWmi]
   [-RemoveConditionRegistry]
   [-RemoveConditionSoftware]
   [-RemoveConditionVariable]
   [-StepName <String>]
   [-StepOrder <ReorderType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepInstallSoftware
   [-BaseVariableName <String>]
   [-EnableContinueOnInstallError <Boolean>]
   [-Program <IResultObject>]
   [-AddCondition <IResultObject[]>]
   [-ClearCondition]
   [-Description <String>]
   [-IsContinueOnError <Boolean>]
   [-IsEnabled <Boolean>]
   [-MoveToIndex <Int32>]
   [-NewStepName <String>]
   [-RemoveConditionFile]
   [-RemoveConditionFolder]
   [-RemoveConditionIfStatement]
   [-RemoveConditionOperatingSystem]
   [-RemoveConditionQueryWmi]
   [-RemoveConditionRegistry]
   [-RemoveConditionSoftware]
   [-RemoveConditionVariable]
   [-StepName <String>]
   [-StepOrder <ReorderType>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepInstallSoftware
   [-BaseVariableName <String>]
   [-EnableContinueOnInstallError <Boolean>]
   [-Program <IResultObject>]
   [-AddCondition <IResultObject[]>]
   [-ClearCondition]
   [-Description <String>]
   [-IsContinueOnError <Boolean>]
   [-IsEnabled <Boolean>]
   [-MoveToIndex <Int32>]
   [-NewStepName <String>]
   [-RemoveConditionFile]
   [-RemoveConditionFolder]
   [-RemoveConditionIfStatement]
   [-RemoveConditionOperatingSystem]
   [-RemoveConditionQueryWmi]
   [-RemoveConditionRegistry]
   [-RemoveConditionSoftware]
   [-RemoveConditionVariable]
   [-StepName <String>]
   [-StepOrder <ReorderType>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepInstallSoftware
   [-Condition <IResultObject[]>]
   [-SetConditionIfStatement]
   [-StatementType <ConditionStatementType>]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepInstallSoftware
   [-Condition <IResultObject[]>]
   [-SetConditionIfStatement]
   [-StatementType <ConditionStatementType>]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepInstallSoftware
   [-Condition <IResultObject[]>]
   -InputObject <IResultObject>
   [-SetConditionIfStatement]
   [-StatementType <ConditionStatementType>]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepInstallSoftware
   [-ConditionVariableName <String>]
   [-ConditionVariableValue <String>]
   [-OperatorType <VariableOperatorType>]
   [-SetConditionVariable]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepInstallSoftware
   [-ConditionVariableName <String>]
   [-ConditionVariableValue <String>]
   [-OperatorType <VariableOperatorType>]
   [-SetConditionVariable]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepInstallSoftware
   [-ConditionVariableName <String>]
   [-ConditionVariableValue <String>]
   -InputObject <IResultObject>
   [-OperatorType <VariableOperatorType>]
   [-SetConditionVariable]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepInstallSoftware
   [-FileDateTimeOperator <VariableOperatorType>]
   [-FilePath <String>]
   [-FileTimestamp <DateTime>]
   [-FileVersion <String>]
   [-SetConditionFile]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-VersionOperator <VariableOperatorType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepInstallSoftware
   [-FileDateTimeOperator <VariableOperatorType>]
   [-FilePath <String>]
   [-FileTimestamp <DateTime>]
   [-FileVersion <String>]
   [-SetConditionFile]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-VersionOperator <VariableOperatorType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepInstallSoftware
   [-FileDateTimeOperator <VariableOperatorType>]
   [-FilePath <String>]
   [-FileTimestamp <DateTime>]
   [-FileVersion <String>]
   -InputObject <IResultObject>
   [-SetConditionFile]
   [-StepName <String>]
   [-VersionOperator <VariableOperatorType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepInstallSoftware
   [-FolderDateTimeOperator <VariableOperatorType>]
   [-FolderPath <String>]
   [-FolderTimestamp <DateTime>]
   [-SetConditionFolder]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepInstallSoftware
   [-FolderDateTimeOperator <VariableOperatorType>]
   [-FolderPath <String>]
   [-FolderTimestamp <DateTime>]
   [-SetConditionFolder]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepInstallSoftware
   [-FolderDateTimeOperator <VariableOperatorType>]
   [-FolderPath <String>]
   [-FolderTimestamp <DateTime>]
   -InputObject <IResultObject>
   [-SetConditionFolder]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepInstallSoftware
   -InputObject <IResultObject>
   [-Namespace <String[]>]
   [-Query <String>]
   [-SetConditionQueryWmi]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepInstallSoftware
   -InputObject <IResultObject>
   [-SetConditionOperatingSystem]
   [-StepName <String>]
   [-SupportedPlatform <IResultObject[]>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepInstallSoftware
   -InputObject <IResultObject>
   [-RegistryKey <String>]
   [-RegistryOperator <VariableOperatorType>]
   [-RegistryValueData <String>]
   [-RegistryValueName <String>]
   [-RootKey <RegistryRootKeyType>]
   [-SetConditionRegistry]
   [-StepName <String>]
   [-ValueType <RegistryValueType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepInstallSoftware
   -InputObject <IResultObject>
   [-IsAnyVersion <Boolean>]
   [-MsiFilePath <String>]
   [-SetConditionSoftware]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepInstallSoftware
   [-IsAnyVersion <Boolean>]
   [-MsiFilePath <String>]
   [-SetConditionSoftware]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepInstallSoftware
   [-IsAnyVersion <Boolean>]
   [-MsiFilePath <String>]
   [-SetConditionSoftware]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepInstallSoftware
   [-Namespace <String[]>]
   [-Query <String>]
   [-SetConditionQueryWmi]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepInstallSoftware
   [-Namespace <String[]>]
   [-Query <String>]
   [-SetConditionQueryWmi]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepInstallSoftware
   [-RegistryKey <String>]
   [-RegistryOperator <VariableOperatorType>]
   [-RegistryValueData <String>]
   [-RegistryValueName <String>]
   [-RootKey <RegistryRootKeyType>]
   [-SetConditionRegistry]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-ValueType <RegistryValueType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepInstallSoftware
   [-RegistryKey <String>]
   [-RegistryOperator <VariableOperatorType>]
   [-RegistryValueData <String>]
   [-RegistryValueName <String>]
   [-RootKey <RegistryRootKeyType>]
   [-SetConditionRegistry]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-ValueType <RegistryValueType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepInstallSoftware
   [-SetConditionOperatingSystem]
   [-StepName <String>]
   [-SupportedPlatform <IResultObject[]>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepInstallSoftware
   [-SetConditionOperatingSystem]
   [-StepName <String>]
   [-SupportedPlatform <IResultObject[]>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

Use este cmdlet para configurar una instancia del paso de secuencia de tareas Instalar paquete.

Para obtener más información sobre este paso, vea Acerca de los pasos de secuencia de tareas: Instalar paquete.

Nota

Ejecute los cmdlets de Configuration Manager desde la unidad de sitio de Configuration Manager, por ejemplo PS XYZ:\> . Para obtener más información, vea getting started.

Ejemplos

Ejemplo 1

En este ejemplo se cambia el paso Instalar paquete en la secuencia de tareas de implementación del sistema operativo predeterminado para instalar paquetes de acuerdo con una lista de variables dinámicas ITtools.

$tsNameOsd = "Default OS deployment"
$tsStepNameInstallPkg = "Install Package"

Set-CMTSStepInstallSoftware -TaskSequenceName $tsNameOsd -StepName $tsStepNameInstallPkg -NewStepName "Install IT tools" -BaseVariableName "ITtools" -ContinueOnInstallError

Parámetros

- Confirm

Solicitará confirmación antes de ejecutar el cmdlet.

Type:	SwitchParameter
Aliases:	cf
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-AddCondition

Especifique un objeto de condición que se agregará a este paso. Para obtener este objeto, use uno de los cmdlets de condición de secuencia de tareas. Por ejemplo, Get-CMTSStepConditionVariable.

Type:	IResultObject[]
Aliases:	AddConditions
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-BaseVariableName

Use este parámetro para instalar paquetes de software de acuerdo con una lista de variables dinámicas. A continuación, la secuencia de tareas instala paquetes con este nombre de variable base. Para obtener más información, vea Install software packages according to dynamic variable list.

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-ClearCondition

Quite una condición de este paso. Use el parámetro -Condition para especificar la condición que se quitará.

Type:	SwitchParameter
Aliases:	ClearConditions
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-Condition

Especifique un objeto de condición que se usará con este paso. Para obtener este objeto, use uno de los cmdlets de condición de secuencia de tareas. Por ejemplo, Get-CMTSStepConditionVariable.

Type:	IResultObject[]
Aliases:	SubCondition, SubConditions
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-ConditionVariableName

Especifique el nombre de la variable de secuencia de tareas que se usará como condición.

Type:	String
Aliases:	Variable
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-ConditionVariableValue

Especifique el valor de la variable de secuencia de tareas que se usará en una condición.

Type:	String
Aliases:	Value
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-Description

Especifique una descripción opcional para este paso de secuencia de tareas.

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-DisableWildcardHandling

Este parámetro trata los caracteres comodín como valores de caracteres literales. No se puede combinar con ForceWildcardHandling.

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-EnableContinueOnInstallError

Establezca este parámetro para $true seguir instalando otros paquetes en la lista si un paquete no se puede instalar. Si establece este parámetro en , y se produce un error $false en la instalación, el paso finaliza inmediatamente.

Type:	Boolean
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-FileDateTimeOperator

Especifique un tipo de operador variable para una condición de fecha y hora del archivo.

Type:	VariableOperatorType
Accepted values:	Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-FilePath

Especifique la ruta de acceso de una condición de archivo.

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-FileTimestamp

Especifique un valor de fecha y hora que se usará para una condición de archivo.

Type:	DateTime
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-FileVersion

Especifique una cadena de versión para una condición de archivo.

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-FolderDateTimeOperator

Especifique un operador de variable para una condición de fecha y hora de carpeta.

Type:	VariableOperatorType
Accepted values:	Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-FolderPath

Especifique la ruta de acceso para una condición de carpeta.

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-FolderTimestamp

Especifique un valor de fecha y hora que se usará para una condición de carpeta.

Type:	DateTime
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-ForceWildcardHandling

Este parámetro procesa caracteres comodín y puede provocar un comportamiento inesperado (no recomendado). No se puede combinar con DisableWildcardHandling.

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-InputObject

Especifique un objeto de secuencia de tareas desde el que obtener el paso Instalar paquete. Para obtener este objeto, use el cmdlet Get-CMTaskSequence.

Type:	IResultObject
Aliases:	TaskSequence
Position:	Named
Default value:	None
Accept pipeline input:	True
Accept wildcard characters:	False

-IsAnyVersion

Use este parámetro con el parámetro SetConditionSoftware para que coincida con cualquier versión del producto.

Type:	Boolean
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-IsContinueOnError

Use este parámetro para habilitar la opción de paso Continuar en error. Al habilitar esta opción, si se produce un error en el paso, la secuencia de tareas continúa.

Type:	Boolean
Aliases:	IsThisStepContinueOnError
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-IsEnabled

Use este parámetro para habilitar este paso de secuencia de tareas.

Type:	Boolean
Aliases:	IsThisStepEnabled
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-MoveToIndex

Mueva este paso a la posición de índice especificada en la secuencia de tareas.

Type:	Int32
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-MsiFilePath

Especifique la ruta de acceso a un archivo Windows Installer para una condición de software.

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-Namespace

Especifique el espacio de nombres de una condición de consulta WMI.

Type:	String[]
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-NewStepName

Use este parámetro para cambiar el nombre de este paso de secuencia de tareas.

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-OperatorType

Especifique un operador que se usará con una condición de variable de secuencia de tareas.

Type:	VariableOperatorType
Accepted values:	Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual, Like, NotLike
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-Program

Especifique un objeto de programa de un paquete que se debe instalar. Para obtener este objeto, use el cmdlet Get-CMProgram.

Type:	IResultObject
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-Query

Especifique una cadena de consulta WMI que se usará para una condición.

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RegistryKey

Especifique la clave que se usará con una condición del Registro.

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RegistryOperator

Especifique un operador que se usará con una condición del Registro.

Type:	VariableOperatorType
Accepted values:	Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RegistryValueData

Especifique los datos de valor que se usarán con una condición del Registro.

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RegistryValueName

Especifique el nombre del valor que se usará con una condición del Registro.

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionFile

Use este parámetro para quitar una condición de archivo.

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionFolder

Use este parámetro para quitar una condición de carpeta.

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionIfStatement

Use este parámetro para quitar una condición if de instrucción.

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionOperatingSystem

Use este parámetro para quitar una condición del sistema operativo.

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionQueryWmi

Use este parámetro para quitar una condición de consulta WMI.

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionRegistry

Use este parámetro para quitar una condición del Registro.

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionSoftware

Use este parámetro para quitar una condición de software.

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionVariable

Use este parámetro para quitar una condición de variable de secuencia de tareas.

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RootKey

Especifique la clave raíz que se usará con una condición del Registro.

Type:	RegistryRootKeyType
Accepted values:	HKeyCurrentUser, HKeyLocalMachine, HKeyUsers, HKeyCurrentConfig
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionFile

Agregue una nueva condición de archivo.

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionFolder

Agregue una nueva condición de carpeta.

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionIfStatement

Agregue una nueva if condición de instrucción.

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionOperatingSystem

Agregue una nueva condición del sistema operativo.

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionQueryWmi

Agregue una nueva condición de consulta WMI.

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionRegistry

Agregue una nueva condición del Registro.

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionSoftware

Agregue una nueva condición de software.

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionVariable

Agregue una nueva condición de variable de secuencia de tareas.

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-StatementType

Establezca el tipo de una condición if de instrucción.

Type:	ConditionStatementType
Aliases:	Operator
Accepted values:	All, Any, None
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-StepName

Especifique el nombre del paso que se debe seleccionar para los cambios.

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-StepOrder

Use este parámetro para reordenar el paso de la secuencia de tareas.

Type:	ReorderType
Accepted values:	MoveUp, MoveDown, MoveToIndex
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-SupportedPlatform

Use este parámetro para especificar las plataformas para una condición del sistema operativo.

Type:	IResultObject[]
Aliases:	SupportedPlatforms
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-TaskSequenceId

Especifique el identificador de paquete de la secuencia de tareas desde la que se va a obtener el paso Instalar paquete. Este valor es un identificador de paquete estándar, por ejemplo XYZ00858 .

Type:	String
Aliases:	Id, TaskSequencePackageId
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-TaskSequenceName

Especifique el nombre de la secuencia de tareas a la que se dirigirán los cambios.

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-ValueType

Especifique el tipo de valor de una condición del Registro.

Type:	RegistryValueType
Accepted values:	RegistrySZ, RegistryExpandSZ, RegistryDWord
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-VersionOperator

Especifique un operador que se usará con una condición de archivo.

Type:	VariableOperatorType
Accepted values:	Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-WhatIf

Muestra lo que ocurriría si se ejecuta el cmdlet. El cmdlet no se ejecuta.

Type:	SwitchParameter
Aliases:	wi
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

Entradas

Microsoft.ConfigurationManagement.ManagementProvider.IResultObject

Salidas

System.Object

Vínculos relacionados

• Get-CMTSStepInstallSoftware
• New-CMTSStepInstallSoftware
• Remove-CMTSStepInstallSoftware
• Acerca de los pasos de secuencia de tareas: Instalar paquete