BitVector32.CreateSection Méthode

Définition

Crée une série de sections qui contiennent de petits entiers.Creates a series of sections that contain small integers.

Surcharges

CreateSection(Int16)

Crée le premier BitVector32.Section d'une série de sections qui contiennent de petits entiers.Creates the first BitVector32.Section in a series of sections that contain small integers.

CreateSection(Int16, BitVector32+Section)

Crée un nouveau BitVector32.Section à la suite du BitVector32.Section spécifié dans une série de sections qui contiennent de petits entiers.Creates a new BitVector32.Section following the specified BitVector32.Section in a series of sections that contain small integers.

CreateSection(Int16)

Crée le premier BitVector32.Section d'une série de sections qui contiennent de petits entiers.Creates the first BitVector32.Section in a series of sections that contain small integers.

public:
 static System::Collections::Specialized::BitVector32::Section CreateSection(short maxValue);
public static System.Collections.Specialized.BitVector32.Section CreateSection (short maxValue);
static member CreateSection : int16 -> System.Collections.Specialized.BitVector32.Section
Public Shared Function CreateSection (maxValue As Short) As BitVector32.Section

Paramètres

maxValue
Int16

Entier signé 16 bits qui spécifie la valeur maximale du nouveau BitVector32.Section.A 16-bit signed integer that specifies the maximum value for the new BitVector32.Section.

Retours

BitVector32.Section qui peut contenir un nombre compris entre zéro et maxValue.A BitVector32.Section that can hold a number from zero to maxValue.

Exceptions

maxValue est inférieur à 1.maxValue is less than 1.

Exemples

L’exemple de code suivant utilise un BitVector32 comme une collection de sections.The following code example uses a BitVector32 as a collection of sections.

#using <system.dll>

using namespace System;
using namespace System::Collections::Specialized;

int main()
{
   // Creates and initializes a BitVector32.
   BitVector32 myBV(0);

   // Creates four sections in the BitVector32 with maximum values 6, 3, 1, and 15.
   // mySect3, which uses exactly one bit, can also be used as a bit flag.
   BitVector32::Section mySect1 = BitVector32::CreateSection( 6 );
   BitVector32::Section mySect2 = BitVector32::CreateSection( 3, mySect1 );
   BitVector32::Section mySect3 = BitVector32::CreateSection( 1, mySect2 );
   BitVector32::Section mySect4 = BitVector32::CreateSection( 15, mySect3 );

   // Displays the values of the sections.
   Console::WriteLine( "Initial values:" );
   Console::WriteLine( "\tmySect1: {0}", myBV[ mySect1 ] );
   Console::WriteLine( "\tmySect2: {0}", myBV[ mySect2 ] );
   Console::WriteLine( "\tmySect3: {0}", myBV[ mySect3 ] );
   Console::WriteLine( "\tmySect4: {0}", myBV[ mySect4 ] );

   // Sets each section to a new value and displays the value of the BitVector32 at each step.
   Console::WriteLine( "Changing the values of each section:" );
   Console::WriteLine( "\tInitial:    \t {0}", myBV );
   myBV[ mySect1 ] = 5;
   Console::WriteLine( "\tmySect1 = 5:\t {0}", myBV );
   myBV[ mySect2 ] = 3;
   Console::WriteLine( "\tmySect2 = 3:\t {0}", myBV );
   myBV[ mySect3 ] = 1;
   Console::WriteLine( "\tmySect3 = 1:\t {0}", myBV );
   myBV[ mySect4 ] = 9;
   Console::WriteLine( "\tmySect4 = 9:\t {0}", myBV );

   // Displays the values of the sections.
   Console::WriteLine( "New values:" );
   Console::WriteLine( "\tmySect1: {0}", myBV[ mySect1 ] );
   Console::WriteLine( "\tmySect2: {0}", myBV[ mySect2 ] );
   Console::WriteLine( "\tmySect3: {0}", myBV[ mySect3 ] );
   Console::WriteLine( "\tmySect4: {0}", myBV[ mySect4 ] );
}

/*
This code produces the following output.

Initial values:
        mySect1: 0
        mySect2: 0
        mySect3: 0
        mySect4: 0
Changing the values of each section:
        Initial:        BitVector32 {00000000000000000000000000000000}
        mySect1 = 5:    BitVector32 {00000000000000000000000000000101}
        mySect2 = 3:    BitVector32 {00000000000000000000000000011101}
        mySect3 = 1:    BitVector32 {00000000000000000000000000111101}
        mySect4 = 9:    BitVector32 {00000000000000000000001001111101}
New values:
        mySect1: 5
        mySect2: 3
        mySect3: 1
        mySect4: 9

*/
using System;
using System.Collections.Specialized;

public class SamplesBitVector32  {

   public static void Main()  {

      // Creates and initializes a BitVector32.
      BitVector32 myBV = new BitVector32( 0 );

      // Creates four sections in the BitVector32 with maximum values 6, 3, 1, and 15.
      // mySect3, which uses exactly one bit, can also be used as a bit flag.
      BitVector32.Section mySect1 = BitVector32.CreateSection( 6 );
      BitVector32.Section mySect2 = BitVector32.CreateSection( 3, mySect1 );
      BitVector32.Section mySect3 = BitVector32.CreateSection( 1, mySect2 );
      BitVector32.Section mySect4 = BitVector32.CreateSection( 15, mySect3 );

      // Displays the values of the sections.
      Console.WriteLine( "Initial values:" );
      Console.WriteLine( "\tmySect1: {0}", myBV[mySect1] );
      Console.WriteLine( "\tmySect2: {0}", myBV[mySect2] );
      Console.WriteLine( "\tmySect3: {0}", myBV[mySect3] );
      Console.WriteLine( "\tmySect4: {0}", myBV[mySect4] );

      // Sets each section to a new value and displays the value of the BitVector32 at each step.
      Console.WriteLine( "Changing the values of each section:" );
      Console.WriteLine( "\tInitial:    \t{0}", myBV.ToString() );
      myBV[mySect1] = 5;
      Console.WriteLine( "\tmySect1 = 5:\t{0}", myBV.ToString() );
      myBV[mySect2] = 3;
      Console.WriteLine( "\tmySect2 = 3:\t{0}", myBV.ToString() );
      myBV[mySect3] = 1;
      Console.WriteLine( "\tmySect3 = 1:\t{0}", myBV.ToString() );
      myBV[mySect4] = 9;
      Console.WriteLine( "\tmySect4 = 9:\t{0}", myBV.ToString() );

      // Displays the values of the sections.
      Console.WriteLine( "New values:" );
      Console.WriteLine( "\tmySect1: {0}", myBV[mySect1] );
      Console.WriteLine( "\tmySect2: {0}", myBV[mySect2] );
      Console.WriteLine( "\tmySect3: {0}", myBV[mySect3] );
      Console.WriteLine( "\tmySect4: {0}", myBV[mySect4] );
   }
}

/*
This code produces the following output.

Initial values:
        mySect1: 0
        mySect2: 0
        mySect3: 0
        mySect4: 0
Changing the values of each section:
        Initial:        BitVector32{00000000000000000000000000000000}
        mySect1 = 5:    BitVector32{00000000000000000000000000000101}
        mySect2 = 3:    BitVector32{00000000000000000000000000011101}
        mySect3 = 1:    BitVector32{00000000000000000000000000111101}
        mySect4 = 9:    BitVector32{00000000000000000000001001111101}
New values:
        mySect1: 5
        mySect2: 3
        mySect3: 1
        mySect4: 9

*/
Imports System.Collections.Specialized

Public Class SamplesBitVector32
   
   Public Shared Sub Main()
      
      ' Creates and initializes a BitVector32.
      Dim myBV As New BitVector32(0)
      
      ' Creates four sections in the BitVector32 with maximum values 6, 3, 1, and 15.
      ' mySect3, which uses exactly one bit, can also be used as a bit flag.
      Dim mySect1 As BitVector32.Section = BitVector32.CreateSection(6)
      Dim mySect2 As BitVector32.Section = BitVector32.CreateSection(3, mySect1)
      Dim mySect3 As BitVector32.Section = BitVector32.CreateSection(1, mySect2)
      Dim mySect4 As BitVector32.Section = BitVector32.CreateSection(15, mySect3)
      
      ' Displays the values of the sections.
      Console.WriteLine("Initial values:")
      Console.WriteLine(ControlChars.Tab + "mySect1: {0}", myBV(mySect1))
      Console.WriteLine(ControlChars.Tab + "mySect2: {0}", myBV(mySect2))
      Console.WriteLine(ControlChars.Tab + "mySect3: {0}", myBV(mySect3))
      Console.WriteLine(ControlChars.Tab + "mySect4: {0}", myBV(mySect4))
      
      ' Sets each section to a new value and displays the value of the BitVector32 at each step.
      Console.WriteLine("Changing the values of each section:")
      Console.WriteLine(ControlChars.Tab + "Initial:    " + ControlChars.Tab + "{0}", myBV.ToString())
      myBV(mySect1) = 5
      Console.WriteLine(ControlChars.Tab + "mySect1 = 5:" + ControlChars.Tab + "{0}", myBV.ToString())
      myBV(mySect2) = 3
      Console.WriteLine(ControlChars.Tab + "mySect2 = 3:" + ControlChars.Tab + "{0}", myBV.ToString())
      myBV(mySect3) = 1
      Console.WriteLine(ControlChars.Tab + "mySect3 = 1:" + ControlChars.Tab + "{0}", myBV.ToString())
      myBV(mySect4) = 9
      Console.WriteLine(ControlChars.Tab + "mySect4 = 9:" + ControlChars.Tab + "{0}", myBV.ToString())
      
      ' Displays the values of the sections.
      Console.WriteLine("New values:")
      Console.WriteLine(ControlChars.Tab + "mySect1: {0}", myBV(mySect1))
      Console.WriteLine(ControlChars.Tab + "mySect2: {0}", myBV(mySect2))
      Console.WriteLine(ControlChars.Tab + "mySect3: {0}", myBV(mySect3))
      Console.WriteLine(ControlChars.Tab + "mySect4: {0}", myBV(mySect4))

   End Sub

End Class


' This code produces the following output.
'
' Initial values:
'        mySect1: 0
'        mySect2: 0
'        mySect3: 0
'        mySect4: 0
' Changing the values of each section:
'        Initial:        BitVector32{00000000000000000000000000000000}
'        mySect1 = 5:    BitVector32{00000000000000000000000000000101}
'        mySect2 = 3:    BitVector32{00000000000000000000000000011101}
'        mySect3 = 1:    BitVector32{00000000000000000000000000111101}
'        mySect4 = 9:    BitVector32{00000000000000000000001001111101}
' New values:
'        mySect1: 5
'        mySect2: 3
'        mySect3: 1
'        mySect4: 9

Remarques

Une BitVector32.Section est une fenêtre dans le BitVector32 et est composée du plus petit nombre de bits consécutifs qui peuvent contenir la valeur maximale spécifiée dans CreateSection.A BitVector32.Section is a window into the BitVector32 and is composed of the smallest number of consecutive bits that can contain the maximum value specified in CreateSection. Par exemple, une section avec une valeur maximale de 1 est composée d’un seul bit, alors qu’une section avec une valeur maximale de 5 est composée de trois bits.For example, a section with a maximum value of 1 is composed of only one bit, whereas a section with a maximum value of 5 is composed of three bits. Vous pouvez créer un BitVector32.Section avec une valeur maximale de 1 pour servir de valeur booléenne, ce qui vous permet de stocker des entiers et des valeurs booléennes dans le même BitVector32.You can create a BitVector32.Section with a maximum value of 1 to serve as a Boolean, thereby allowing you to store integers and Booleans in the same BitVector32.

Si des sections existent déjà dans le BitVector32, ces sections sont toujours accessibles ; Toutefois, les sections qui se chevauchent peuvent entraîner des résultats inattendus.If sections already exist in the BitVector32, those sections are still accessible; however, overlapping sections might cause unexpected results.

Cette méthode est une opération O (1).This method is an O(1) operation.

CreateSection(Int16, BitVector32+Section)

Crée un nouveau BitVector32.Section à la suite du BitVector32.Section spécifié dans une série de sections qui contiennent de petits entiers.Creates a new BitVector32.Section following the specified BitVector32.Section in a series of sections that contain small integers.

public:
 static System::Collections::Specialized::BitVector32::Section CreateSection(short maxValue, System::Collections::Specialized::BitVector32::Section previous);
public static System.Collections.Specialized.BitVector32.Section CreateSection (short maxValue, System.Collections.Specialized.BitVector32.Section previous);
static member CreateSection : int16 * System.Collections.Specialized.BitVector32.Section -> System.Collections.Specialized.BitVector32.Section
Public Shared Function CreateSection (maxValue As Short, previous As BitVector32.Section) As BitVector32.Section

Paramètres

maxValue
Int16

Entier signé 16 bits qui spécifie la valeur maximale du nouveau BitVector32.Section.A 16-bit signed integer that specifies the maximum value for the new BitVector32.Section.

previous
BitVector32.Section

BitVector32.Section précédent dans BitVector32.The previous BitVector32.Section in the BitVector32.

Retours

BitVector32.Section qui peut contenir un nombre compris entre zéro et maxValue.A BitVector32.Section that can hold a number from zero to maxValue.

Exceptions

maxValue est inférieur à 1.maxValue is less than 1.

previous inclut le bit final dans BitVector32.previous includes the final bit in the BitVector32.

- ou --or- maxValue est supérieur à la valeur la plus élevée pouvant être représentée par le nombre de bits après previous.maxValue is greater than the highest value that can be represented by the number of bits after previous.

Exemples

L’exemple de code suivant utilise un BitVector32 comme une collection de sections.The following code example uses a BitVector32 as a collection of sections.

#using <system.dll>

using namespace System;
using namespace System::Collections::Specialized;

int main()
{
   // Creates and initializes a BitVector32.
   BitVector32 myBV(0);

   // Creates four sections in the BitVector32 with maximum values 6, 3, 1, and 15.
   // mySect3, which uses exactly one bit, can also be used as a bit flag.
   BitVector32::Section mySect1 = BitVector32::CreateSection( 6 );
   BitVector32::Section mySect2 = BitVector32::CreateSection( 3, mySect1 );
   BitVector32::Section mySect3 = BitVector32::CreateSection( 1, mySect2 );
   BitVector32::Section mySect4 = BitVector32::CreateSection( 15, mySect3 );

   // Displays the values of the sections.
   Console::WriteLine( "Initial values:" );
   Console::WriteLine( "\tmySect1: {0}", myBV[ mySect1 ] );
   Console::WriteLine( "\tmySect2: {0}", myBV[ mySect2 ] );
   Console::WriteLine( "\tmySect3: {0}", myBV[ mySect3 ] );
   Console::WriteLine( "\tmySect4: {0}", myBV[ mySect4 ] );

   // Sets each section to a new value and displays the value of the BitVector32 at each step.
   Console::WriteLine( "Changing the values of each section:" );
   Console::WriteLine( "\tInitial:    \t {0}", myBV );
   myBV[ mySect1 ] = 5;
   Console::WriteLine( "\tmySect1 = 5:\t {0}", myBV );
   myBV[ mySect2 ] = 3;
   Console::WriteLine( "\tmySect2 = 3:\t {0}", myBV );
   myBV[ mySect3 ] = 1;
   Console::WriteLine( "\tmySect3 = 1:\t {0}", myBV );
   myBV[ mySect4 ] = 9;
   Console::WriteLine( "\tmySect4 = 9:\t {0}", myBV );

   // Displays the values of the sections.
   Console::WriteLine( "New values:" );
   Console::WriteLine( "\tmySect1: {0}", myBV[ mySect1 ] );
   Console::WriteLine( "\tmySect2: {0}", myBV[ mySect2 ] );
   Console::WriteLine( "\tmySect3: {0}", myBV[ mySect3 ] );
   Console::WriteLine( "\tmySect4: {0}", myBV[ mySect4 ] );
}

/*
This code produces the following output.

Initial values:
        mySect1: 0
        mySect2: 0
        mySect3: 0
        mySect4: 0
Changing the values of each section:
        Initial:        BitVector32 {00000000000000000000000000000000}
        mySect1 = 5:    BitVector32 {00000000000000000000000000000101}
        mySect2 = 3:    BitVector32 {00000000000000000000000000011101}
        mySect3 = 1:    BitVector32 {00000000000000000000000000111101}
        mySect4 = 9:    BitVector32 {00000000000000000000001001111101}
New values:
        mySect1: 5
        mySect2: 3
        mySect3: 1
        mySect4: 9

*/
using System;
using System.Collections.Specialized;

public class SamplesBitVector32  {

   public static void Main()  {

      // Creates and initializes a BitVector32.
      BitVector32 myBV = new BitVector32( 0 );

      // Creates four sections in the BitVector32 with maximum values 6, 3, 1, and 15.
      // mySect3, which uses exactly one bit, can also be used as a bit flag.
      BitVector32.Section mySect1 = BitVector32.CreateSection( 6 );
      BitVector32.Section mySect2 = BitVector32.CreateSection( 3, mySect1 );
      BitVector32.Section mySect3 = BitVector32.CreateSection( 1, mySect2 );
      BitVector32.Section mySect4 = BitVector32.CreateSection( 15, mySect3 );

      // Displays the values of the sections.
      Console.WriteLine( "Initial values:" );
      Console.WriteLine( "\tmySect1: {0}", myBV[mySect1] );
      Console.WriteLine( "\tmySect2: {0}", myBV[mySect2] );
      Console.WriteLine( "\tmySect3: {0}", myBV[mySect3] );
      Console.WriteLine( "\tmySect4: {0}", myBV[mySect4] );

      // Sets each section to a new value and displays the value of the BitVector32 at each step.
      Console.WriteLine( "Changing the values of each section:" );
      Console.WriteLine( "\tInitial:    \t{0}", myBV.ToString() );
      myBV[mySect1] = 5;
      Console.WriteLine( "\tmySect1 = 5:\t{0}", myBV.ToString() );
      myBV[mySect2] = 3;
      Console.WriteLine( "\tmySect2 = 3:\t{0}", myBV.ToString() );
      myBV[mySect3] = 1;
      Console.WriteLine( "\tmySect3 = 1:\t{0}", myBV.ToString() );
      myBV[mySect4] = 9;
      Console.WriteLine( "\tmySect4 = 9:\t{0}", myBV.ToString() );

      // Displays the values of the sections.
      Console.WriteLine( "New values:" );
      Console.WriteLine( "\tmySect1: {0}", myBV[mySect1] );
      Console.WriteLine( "\tmySect2: {0}", myBV[mySect2] );
      Console.WriteLine( "\tmySect3: {0}", myBV[mySect3] );
      Console.WriteLine( "\tmySect4: {0}", myBV[mySect4] );
   }
}

/*
This code produces the following output.

Initial values:
        mySect1: 0
        mySect2: 0
        mySect3: 0
        mySect4: 0
Changing the values of each section:
        Initial:        BitVector32{00000000000000000000000000000000}
        mySect1 = 5:    BitVector32{00000000000000000000000000000101}
        mySect2 = 3:    BitVector32{00000000000000000000000000011101}
        mySect3 = 1:    BitVector32{00000000000000000000000000111101}
        mySect4 = 9:    BitVector32{00000000000000000000001001111101}
New values:
        mySect1: 5
        mySect2: 3
        mySect3: 1
        mySect4: 9

*/
Imports System.Collections.Specialized

Public Class SamplesBitVector32
   
   Public Shared Sub Main()
      
      ' Creates and initializes a BitVector32.
      Dim myBV As New BitVector32(0)
      
      ' Creates four sections in the BitVector32 with maximum values 6, 3, 1, and 15.
      ' mySect3, which uses exactly one bit, can also be used as a bit flag.
      Dim mySect1 As BitVector32.Section = BitVector32.CreateSection(6)
      Dim mySect2 As BitVector32.Section = BitVector32.CreateSection(3, mySect1)
      Dim mySect3 As BitVector32.Section = BitVector32.CreateSection(1, mySect2)
      Dim mySect4 As BitVector32.Section = BitVector32.CreateSection(15, mySect3)
      
      ' Displays the values of the sections.
      Console.WriteLine("Initial values:")
      Console.WriteLine(ControlChars.Tab + "mySect1: {0}", myBV(mySect1))
      Console.WriteLine(ControlChars.Tab + "mySect2: {0}", myBV(mySect2))
      Console.WriteLine(ControlChars.Tab + "mySect3: {0}", myBV(mySect3))
      Console.WriteLine(ControlChars.Tab + "mySect4: {0}", myBV(mySect4))
      
      ' Sets each section to a new value and displays the value of the BitVector32 at each step.
      Console.WriteLine("Changing the values of each section:")
      Console.WriteLine(ControlChars.Tab + "Initial:    " + ControlChars.Tab + "{0}", myBV.ToString())
      myBV(mySect1) = 5
      Console.WriteLine(ControlChars.Tab + "mySect1 = 5:" + ControlChars.Tab + "{0}", myBV.ToString())
      myBV(mySect2) = 3
      Console.WriteLine(ControlChars.Tab + "mySect2 = 3:" + ControlChars.Tab + "{0}", myBV.ToString())
      myBV(mySect3) = 1
      Console.WriteLine(ControlChars.Tab + "mySect3 = 1:" + ControlChars.Tab + "{0}", myBV.ToString())
      myBV(mySect4) = 9
      Console.WriteLine(ControlChars.Tab + "mySect4 = 9:" + ControlChars.Tab + "{0}", myBV.ToString())
      
      ' Displays the values of the sections.
      Console.WriteLine("New values:")
      Console.WriteLine(ControlChars.Tab + "mySect1: {0}", myBV(mySect1))
      Console.WriteLine(ControlChars.Tab + "mySect2: {0}", myBV(mySect2))
      Console.WriteLine(ControlChars.Tab + "mySect3: {0}", myBV(mySect3))
      Console.WriteLine(ControlChars.Tab + "mySect4: {0}", myBV(mySect4))

   End Sub

End Class


' This code produces the following output.
'
' Initial values:
'        mySect1: 0
'        mySect2: 0
'        mySect3: 0
'        mySect4: 0
' Changing the values of each section:
'        Initial:        BitVector32{00000000000000000000000000000000}
'        mySect1 = 5:    BitVector32{00000000000000000000000000000101}
'        mySect2 = 3:    BitVector32{00000000000000000000000000011101}
'        mySect3 = 1:    BitVector32{00000000000000000000000000111101}
'        mySect4 = 9:    BitVector32{00000000000000000000001001111101}
' New values:
'        mySect1: 5
'        mySect2: 3
'        mySect3: 1
'        mySect4: 9

Remarques

Une BitVector32.Section est une fenêtre dans le BitVector32 et est composée du plus petit nombre de bits consécutifs qui peuvent contenir la valeur maximale spécifiée dans CreateSection.A BitVector32.Section is a window into the BitVector32 and is composed of the smallest number of consecutive bits that can contain the maximum value specified in CreateSection. Par exemple, une section avec une valeur maximale de 1 est composée d’un seul bit, alors qu’une section avec une valeur maximale de 5 est composée de trois bits.For example, a section with a maximum value of 1 is composed of only one bit, whereas a section with a maximum value of 5 is composed of three bits. Vous pouvez créer un BitVector32.Section avec une valeur maximale de 1 pour servir de valeur booléenne, ce qui vous permet de stocker des entiers et des valeurs booléennes dans le même BitVector32.You can create a BitVector32.Section with a maximum value of 1 to serve as a Boolean, thereby allowing you to store integers and Booleans in the same BitVector32.

Si des sections existent déjà après previous dans le BitVector32, ces sections sont toujours accessibles ; Toutefois, les sections qui se chevauchent peuvent entraîner des résultats inattendus.If sections already exist after previous in the BitVector32, those sections are still accessible; however, overlapping sections might cause unexpected results.

Cette méthode est une opération O (1).This method is an O(1) operation.

S’applique à