X509Store Constructeurs

Référence

Définition

Espace de noms:: System.Security.Cryptography.X509Certificates

Assembly:: System.Security.Cryptography.X509Certificates.dll

Assembly:: System.Security.Cryptography.dll

Assembly:: System.dll

Assembly:: netstandard.dll

Important

Certaines informations portent sur la préversion du produit qui est susceptible d’être en grande partie modifiée avant sa publication. Microsoft exclut toute garantie, expresse ou implicite, concernant les informations fournies ici.

Initialise une nouvelle instance de la classe X509Store.

Surcharges

X509Store()	Initialise une nouvelle instance de la classe X509Store à l’aide du magasin de certificats personnels de l’utilisateur actif.
X509Store(IntPtr)	Initialise une nouvelle instance de la classe X509Store en utilisant un handle Intptr vers un magasin `HCERTSTORE`.
X509Store(StoreLocation)	Initialise une nouvelle instance de la classe X509Store à l’aide du magasin de certificats personnels à partir de la valeur d’emplacement du magasin spécifiée.
X509Store(StoreName)	Initialise une nouvelle instance de la classe X509Store à l’aide du nom de magasin spécifié des magasins de certificats de l’utilisateur actif.
X509Store(String)	Initialise une nouvelle instance de la classe X509Store avec le nom de magasin spécifié.
X509Store(StoreName, StoreLocation)	Initialise une nouvelle instance de la classe X509Store à l’aide des valeurs StoreName et StoreLocation spécifiées.
X509Store(String, StoreLocation)	Initialise une nouvelle instance de la classe X509Store à l’aide d’un nom de magasin et d’un emplacement de magasin spécifiés.
X509Store(StoreName, StoreLocation, OpenFlags)	Initialise une nouvelle instance de la classe X509Store à l’aide du nom de magasin et des valeurs d’emplacement de magasin spécifiés, puis l’ouvre en utilisant les indicateurs spécifiés.
X509Store(String, StoreLocation, OpenFlags)	Initialise une nouvelle instance de la classe X509Store à l’aide du nom de magasin et des valeurs d’emplacement de magasin spécifiés, puis l’ouvre en utilisant les indicateurs spécifiés.

X509Store()

Initialise une nouvelle instance de la classe X509Store à l’aide du magasin de certificats personnels de l’utilisateur actif.

public:
 X509Store();

public X509Store ();

Public Sub New ()

Exemples

L’exemple de code suivant ouvre un magasin de certificats X.509, ajoute et supprime des certificats, puis ferme le magasin. Il part du principe que vous disposez de trois certificats à ajouter à un magasin local et de le supprimer.

#using <System.dll>
#using <System.Security.dll>

using namespace System;
using namespace System::Security::Cryptography;
using namespace System::Security::Cryptography::X509Certificates;
using namespace System::IO;
int main()
{
   
   //Create new X509 store called teststore from the local certificate store.
   X509Store ^ store = gcnew X509Store( "teststore",StoreLocation::CurrentUser );
   store->Open( OpenFlags::ReadWrite );
   X509Certificate2 ^ certificate = gcnew X509Certificate2;
   
   //Create certificates from certificate files.
   //You must put in a valid path to three certificates in the following constructors.
   X509Certificate2 ^ certificate1 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   X509Certificate2 ^ certificate2 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   X509Certificate2 ^ certificate5 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   
   //Create a collection and add two of the certificates.
   X509Certificate2Collection ^ collection = gcnew X509Certificate2Collection;
   collection->Add( certificate2 );
   collection->Add( certificate5 );
   
   //Add certificates to the store.
   store->Add( certificate1 );
   store->AddRange( collection );
   X509Certificate2Collection ^ storecollection = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "Store name: {0}", store->Name );
   Console::WriteLine( "Store location: {0}", store->Location );
   System::Collections::IEnumerator^ myEnum = storecollection->GetEnumerator();
   while ( myEnum->MoveNext() )
   {
      X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum->Current);
      Console::WriteLine( "certificate name: {0}", x509->Subject );
   }

   
   //Remove a certificate.
   store->Remove( certificate1 );
   X509Certificate2Collection ^ storecollection2 = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "{1}Store name: {0}", store->Name, Environment::NewLine );
   System::Collections::IEnumerator^ myEnum1 = storecollection2->GetEnumerator();
   while ( myEnum1->MoveNext() )
   {
      X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum1->Current);
      Console::WriteLine( "certificate name: {0}", x509->Subject );
   }

   
   //Remove a range of certificates.
   store->RemoveRange( collection );
   X509Certificate2Collection ^ storecollection3 = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "{1}Store name: {0}", store->Name, Environment::NewLine );
   if ( storecollection3->Count == 0 )
   {
      Console::WriteLine( "Store contains no certificates." );
   }
   else
   {
      System::Collections::IEnumerator^ myEnum2 = storecollection3->GetEnumerator();
      while ( myEnum2->MoveNext() )
      {
         X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum2->Current);
         Console::WriteLine( "certificate name: {0}", x509->Subject );
      }
   }

   
   //Close the store.
   store->Close();
}

using System;
using System.Security.Cryptography;
using System.Security.Cryptography.X509Certificates;
using System.IO;

public class X509store2
{
    public static void Main (string[] args)
    {
        //Create new X509 store called teststore from the local certificate store.
        X509Store store = new X509Store ("teststore", StoreLocation.CurrentUser);
        store.Open (OpenFlags.ReadWrite);
        X509Certificate2 certificate = new X509Certificate2 ();

        //Create certificates from certificate files.
        //You must put in a valid path to three certificates in the following constructors.
        X509Certificate2 certificate1 = new X509Certificate2 ("c:\\mycerts\\*****.cer");
        X509Certificate2 certificate2 = new X509Certificate2 ("c:\\mycerts\\*****.cer");
        X509Certificate2 certificate5 = new X509Certificate2 ("c:\\mycerts\\*****.cer");

        //Create a collection and add two of the certificates.
        X509Certificate2Collection collection = new X509Certificate2Collection ();
        collection.Add (certificate2);
        collection.Add (certificate5);

        //Add certificates to the store.
        store.Add (certificate1);
        store.AddRange (collection);

        X509Certificate2Collection storecollection = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("Store name: {0}", store.Name);
        Console.WriteLine ("Store location: {0}", store.Location);
        foreach (X509Certificate2 x509 in storecollection)
        {
            Console.WriteLine("certificate name: {0}",x509.Subject);
        }

        //Remove a certificate.
        store.Remove (certificate1);
        X509Certificate2Collection storecollection2 = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("{1}Store name: {0}", store.Name, Environment.NewLine);
        foreach (X509Certificate2 x509 in storecollection2)
        {
            Console.WriteLine ("certificate name: {0}", x509.Subject);
        }

        //Remove a range of certificates.
        store.RemoveRange (collection);
        X509Certificate2Collection storecollection3 = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("{1}Store name: {0}", store.Name, Environment.NewLine);
        if (storecollection3.Count == 0)
        {
            Console.WriteLine ("Store contains no certificates.");
        }
        else
        {
            foreach (X509Certificate2 x509 in storecollection3)
            {
                Console.WriteLine ("certificate name: {0}", x509.Subject);
            }
        }

        //Close the store.
        store.Close ();
    }	
}

Imports System.Security.Cryptography
Imports System.Security.Cryptography.X509Certificates
Imports System.IO



Class X509store2

    Shared Sub Main(ByVal args() As String)
        'Create new X509 store called teststore from the local certificate store.
        Dim store As New X509Store("teststore", StoreLocation.CurrentUser)
        store.Open(OpenFlags.ReadWrite)
        Dim certificate As New X509Certificate2()

        'Create certificates from certificate files.
        'You must put in a valid path to three certificates in the following constructors.
        Dim certificate1 As New X509Certificate2("c:\mycerts\*****.cer")
        Dim certificate2 As New X509Certificate2("c:\mycerts\*****.cer")
        Dim certificate5 As New X509Certificate2("c:\mycerts\*****.cer")

        'Create a collection and add two of the certificates.
        Dim collection As New X509Certificate2Collection()
        collection.Add(certificate2)
        collection.Add(certificate5)

        'Add certificates to the store.
        store.Add(certificate1)
        store.AddRange(collection)

        Dim storecollection As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("Store name: {0}", store.Name)
        Console.WriteLine("Store location: {0}", store.Location)
        Dim x509 As X509Certificate2
        For Each x509 In storecollection
            Console.WriteLine("certificate name: {0}", x509.Subject)
        Next x509

        'Remove a certificate.
        store.Remove(certificate1)
        Dim storecollection2 As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("{1}Store name: {0}", store.Name, Environment.NewLine)
        Dim x509a As X509Certificate2
        For Each x509a In storecollection2
            Console.WriteLine("certificate name: {0}", x509a.Subject)
        Next x509a

        'Remove a range of certificates.
        store.RemoveRange(collection)
        Dim storecollection3 As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("{1}Store name: {0}", store.Name, Environment.NewLine)
        If storecollection3.Count = 0 Then
            Console.WriteLine("Store contains no certificates.")
        Else
            Dim x509b As X509Certificate2
            For Each x509b In storecollection3
                Console.WriteLine("certificate name: {0}", x509b.Subject)
            Next x509b
        End If

        'Close the store.
        store.Close()

    End Sub
End Class

Remarques

Utilisez ce constructeur pour créer un X509Store objet à l’aide du magasin de certificats X.509 personnel pour l’utilisateur actuel.

S’applique à

X509Store(IntPtr)

Initialise une nouvelle instance de la classe X509Store en utilisant un handle Intptr vers un magasin HCERTSTORE.

public:
 X509Store(IntPtr storeHandle);

public X509Store (IntPtr storeHandle);

new System.Security.Cryptography.X509Certificates.X509Store : nativeint -> System.Security.Cryptography.X509Certificates.X509Store

Public Sub New (storeHandle As IntPtr)

Paramètres

storeHandle: IntPtr
nativeint

Handle pour un magasin HCERTSTORE.

Exceptions

ArgumentNullException

Le paramètre storeHandle a la valeur null.

CryptographicException

Le paramètre storeHandle pointe vers un contexte non valide.

Remarques

Utilisez ce constructeur pour assurer la compatibilité avec l’API de chiffrement Microsoft non managée (CAPI).

S’applique à

X509Store(StoreLocation)

Initialise une nouvelle instance de la classe X509Store à l’aide du magasin de certificats personnels à partir de la valeur d’emplacement du magasin spécifiée.

public:
 X509Store(System::Security::Cryptography::X509Certificates::StoreLocation storeLocation);

public X509Store (System.Security.Cryptography.X509Certificates.StoreLocation storeLocation);

new System.Security.Cryptography.X509Certificates.X509Store : System.Security.Cryptography.X509Certificates.StoreLocation -> System.Security.Cryptography.X509Certificates.X509Store

Public Sub New (storeLocation As StoreLocation)

Paramètres

storeLocation: StoreLocation

L’une des valeurs de l’énumération qui spécifie l’emplacement du magasin de certificats X.509.

Exemples

#using <System.dll>
#using <System.Security.dll>

using namespace System;
using namespace System::Security::Cryptography;
using namespace System::Security::Cryptography::X509Certificates;
using namespace System::IO;
int main()
{
   
   //Create new X509 store called teststore from the local certificate store.
   X509Store ^ store = gcnew X509Store( "teststore",StoreLocation::CurrentUser );
   store->Open( OpenFlags::ReadWrite );
   X509Certificate2 ^ certificate = gcnew X509Certificate2;
   
   //Create certificates from certificate files.
   //You must put in a valid path to three certificates in the following constructors.
   X509Certificate2 ^ certificate1 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   X509Certificate2 ^ certificate2 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   X509Certificate2 ^ certificate5 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   
   //Create a collection and add two of the certificates.
   X509Certificate2Collection ^ collection = gcnew X509Certificate2Collection;
   collection->Add( certificate2 );
   collection->Add( certificate5 );
   
   //Add certificates to the store.
   store->Add( certificate1 );
   store->AddRange( collection );
   X509Certificate2Collection ^ storecollection = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "Store name: {0}", store->Name );
   Console::WriteLine( "Store location: {0}", store->Location );
   System::Collections::IEnumerator^ myEnum = storecollection->GetEnumerator();
   while ( myEnum->MoveNext() )
   {
      X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum->Current);
      Console::WriteLine( "certificate name: {0}", x509->Subject );
   }

   
   //Remove a certificate.
   store->Remove( certificate1 );
   X509Certificate2Collection ^ storecollection2 = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "{1}Store name: {0}", store->Name, Environment::NewLine );
   System::Collections::IEnumerator^ myEnum1 = storecollection2->GetEnumerator();
   while ( myEnum1->MoveNext() )
   {
      X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum1->Current);
      Console::WriteLine( "certificate name: {0}", x509->Subject );
   }

   
   //Remove a range of certificates.
   store->RemoveRange( collection );
   X509Certificate2Collection ^ storecollection3 = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "{1}Store name: {0}", store->Name, Environment::NewLine );
   if ( storecollection3->Count == 0 )
   {
      Console::WriteLine( "Store contains no certificates." );
   }
   else
   {
      System::Collections::IEnumerator^ myEnum2 = storecollection3->GetEnumerator();
      while ( myEnum2->MoveNext() )
      {
         X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum2->Current);
         Console::WriteLine( "certificate name: {0}", x509->Subject );
      }
   }

   
   //Close the store.
   store->Close();
}

using System;
using System.Security.Cryptography;
using System.Security.Cryptography.X509Certificates;
using System.IO;

public class X509store2
{
    public static void Main (string[] args)
    {
        //Create new X509 store called teststore from the local certificate store.
        X509Store store = new X509Store ("teststore", StoreLocation.CurrentUser);
        store.Open (OpenFlags.ReadWrite);
        X509Certificate2 certificate = new X509Certificate2 ();

        //Create certificates from certificate files.
        //You must put in a valid path to three certificates in the following constructors.
        X509Certificate2 certificate1 = new X509Certificate2 ("c:\\mycerts\\*****.cer");
        X509Certificate2 certificate2 = new X509Certificate2 ("c:\\mycerts\\*****.cer");
        X509Certificate2 certificate5 = new X509Certificate2 ("c:\\mycerts\\*****.cer");

        //Create a collection and add two of the certificates.
        X509Certificate2Collection collection = new X509Certificate2Collection ();
        collection.Add (certificate2);
        collection.Add (certificate5);

        //Add certificates to the store.
        store.Add (certificate1);
        store.AddRange (collection);

        X509Certificate2Collection storecollection = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("Store name: {0}", store.Name);
        Console.WriteLine ("Store location: {0}", store.Location);
        foreach (X509Certificate2 x509 in storecollection)
        {
            Console.WriteLine("certificate name: {0}",x509.Subject);
        }

        //Remove a certificate.
        store.Remove (certificate1);
        X509Certificate2Collection storecollection2 = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("{1}Store name: {0}", store.Name, Environment.NewLine);
        foreach (X509Certificate2 x509 in storecollection2)
        {
            Console.WriteLine ("certificate name: {0}", x509.Subject);
        }

        //Remove a range of certificates.
        store.RemoveRange (collection);
        X509Certificate2Collection storecollection3 = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("{1}Store name: {0}", store.Name, Environment.NewLine);
        if (storecollection3.Count == 0)
        {
            Console.WriteLine ("Store contains no certificates.");
        }
        else
        {
            foreach (X509Certificate2 x509 in storecollection3)
            {
                Console.WriteLine ("certificate name: {0}", x509.Subject);
            }
        }

        //Close the store.
        store.Close ();
    }	
}

Imports System.Security.Cryptography
Imports System.Security.Cryptography.X509Certificates
Imports System.IO



Class X509store2

    Shared Sub Main(ByVal args() As String)
        'Create new X509 store called teststore from the local certificate store.
        Dim store As New X509Store("teststore", StoreLocation.CurrentUser)
        store.Open(OpenFlags.ReadWrite)
        Dim certificate As New X509Certificate2()

        'Create certificates from certificate files.
        'You must put in a valid path to three certificates in the following constructors.
        Dim certificate1 As New X509Certificate2("c:\mycerts\*****.cer")
        Dim certificate2 As New X509Certificate2("c:\mycerts\*****.cer")
        Dim certificate5 As New X509Certificate2("c:\mycerts\*****.cer")

        'Create a collection and add two of the certificates.
        Dim collection As New X509Certificate2Collection()
        collection.Add(certificate2)
        collection.Add(certificate5)

        'Add certificates to the store.
        store.Add(certificate1)
        store.AddRange(collection)

        Dim storecollection As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("Store name: {0}", store.Name)
        Console.WriteLine("Store location: {0}", store.Location)
        Dim x509 As X509Certificate2
        For Each x509 In storecollection
            Console.WriteLine("certificate name: {0}", x509.Subject)
        Next x509

        'Remove a certificate.
        store.Remove(certificate1)
        Dim storecollection2 As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("{1}Store name: {0}", store.Name, Environment.NewLine)
        Dim x509a As X509Certificate2
        For Each x509a In storecollection2
            Console.WriteLine("certificate name: {0}", x509a.Subject)
        Next x509a

        'Remove a range of certificates.
        store.RemoveRange(collection)
        Dim storecollection3 As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("{1}Store name: {0}", store.Name, Environment.NewLine)
        If storecollection3.Count = 0 Then
            Console.WriteLine("Store contains no certificates.")
        Else
            Dim x509b As X509Certificate2
            For Each x509b In storecollection3
                Console.WriteLine("certificate name: {0}", x509b.Subject)
            Next x509b
        End If

        'Close the store.
        store.Close()

    End Sub
End Class

Remarques

Utilisez ce constructeur pour créer un X509Store objet, en spécifiant l’emplacement du magasin, qui est l’emplacement de l’utilisateur actuel ou de l’ordinateur local.

S’applique à

X509Store(StoreName)

Initialise une nouvelle instance de la classe X509Store à l’aide du nom de magasin spécifié des magasins de certificats de l’utilisateur actif.

public:
 X509Store(System::Security::Cryptography::X509Certificates::StoreName storeName);

public X509Store (System.Security.Cryptography.X509Certificates.StoreName storeName);

new System.Security.Cryptography.X509Certificates.X509Store : System.Security.Cryptography.X509Certificates.StoreName -> System.Security.Cryptography.X509Certificates.X509Store

Public Sub New (storeName As StoreName)

Paramètres

storeName: StoreName

L’une des valeurs de l’énumération qui spécifie le nom du magasin de certificats X.509.

Exceptions

ArgumentException

storeName n'est pas un nom valide.

Exemples

#using <System.dll>
#using <System.Security.dll>

using namespace System;
using namespace System::Security::Cryptography;
using namespace System::Security::Cryptography::X509Certificates;
using namespace System::IO;
int main()
{
   
   //Create new X509 store called teststore from the local certificate store.
   X509Store ^ store = gcnew X509Store( "teststore",StoreLocation::CurrentUser );
   store->Open( OpenFlags::ReadWrite );
   X509Certificate2 ^ certificate = gcnew X509Certificate2;
   
   //Create certificates from certificate files.
   //You must put in a valid path to three certificates in the following constructors.
   X509Certificate2 ^ certificate1 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   X509Certificate2 ^ certificate2 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   X509Certificate2 ^ certificate5 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   
   //Create a collection and add two of the certificates.
   X509Certificate2Collection ^ collection = gcnew X509Certificate2Collection;
   collection->Add( certificate2 );
   collection->Add( certificate5 );
   
   //Add certificates to the store.
   store->Add( certificate1 );
   store->AddRange( collection );
   X509Certificate2Collection ^ storecollection = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "Store name: {0}", store->Name );
   Console::WriteLine( "Store location: {0}", store->Location );
   System::Collections::IEnumerator^ myEnum = storecollection->GetEnumerator();
   while ( myEnum->MoveNext() )
   {
      X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum->Current);
      Console::WriteLine( "certificate name: {0}", x509->Subject );
   }

   
   //Remove a certificate.
   store->Remove( certificate1 );
   X509Certificate2Collection ^ storecollection2 = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "{1}Store name: {0}", store->Name, Environment::NewLine );
   System::Collections::IEnumerator^ myEnum1 = storecollection2->GetEnumerator();
   while ( myEnum1->MoveNext() )
   {
      X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum1->Current);
      Console::WriteLine( "certificate name: {0}", x509->Subject );
   }

   
   //Remove a range of certificates.
   store->RemoveRange( collection );
   X509Certificate2Collection ^ storecollection3 = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "{1}Store name: {0}", store->Name, Environment::NewLine );
   if ( storecollection3->Count == 0 )
   {
      Console::WriteLine( "Store contains no certificates." );
   }
   else
   {
      System::Collections::IEnumerator^ myEnum2 = storecollection3->GetEnumerator();
      while ( myEnum2->MoveNext() )
      {
         X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum2->Current);
         Console::WriteLine( "certificate name: {0}", x509->Subject );
      }
   }

   
   //Close the store.
   store->Close();
}

using System;
using System.Security.Cryptography;
using System.Security.Cryptography.X509Certificates;
using System.IO;

public class X509store2
{
    public static void Main (string[] args)
    {
        //Create new X509 store called teststore from the local certificate store.
        X509Store store = new X509Store ("teststore", StoreLocation.CurrentUser);
        store.Open (OpenFlags.ReadWrite);
        X509Certificate2 certificate = new X509Certificate2 ();

        //Create certificates from certificate files.
        //You must put in a valid path to three certificates in the following constructors.
        X509Certificate2 certificate1 = new X509Certificate2 ("c:\\mycerts\\*****.cer");
        X509Certificate2 certificate2 = new X509Certificate2 ("c:\\mycerts\\*****.cer");
        X509Certificate2 certificate5 = new X509Certificate2 ("c:\\mycerts\\*****.cer");

        //Create a collection and add two of the certificates.
        X509Certificate2Collection collection = new X509Certificate2Collection ();
        collection.Add (certificate2);
        collection.Add (certificate5);

        //Add certificates to the store.
        store.Add (certificate1);
        store.AddRange (collection);

        X509Certificate2Collection storecollection = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("Store name: {0}", store.Name);
        Console.WriteLine ("Store location: {0}", store.Location);
        foreach (X509Certificate2 x509 in storecollection)
        {
            Console.WriteLine("certificate name: {0}",x509.Subject);
        }

        //Remove a certificate.
        store.Remove (certificate1);
        X509Certificate2Collection storecollection2 = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("{1}Store name: {0}", store.Name, Environment.NewLine);
        foreach (X509Certificate2 x509 in storecollection2)
        {
            Console.WriteLine ("certificate name: {0}", x509.Subject);
        }

        //Remove a range of certificates.
        store.RemoveRange (collection);
        X509Certificate2Collection storecollection3 = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("{1}Store name: {0}", store.Name, Environment.NewLine);
        if (storecollection3.Count == 0)
        {
            Console.WriteLine ("Store contains no certificates.");
        }
        else
        {
            foreach (X509Certificate2 x509 in storecollection3)
            {
                Console.WriteLine ("certificate name: {0}", x509.Subject);
            }
        }

        //Close the store.
        store.Close ();
    }	
}

Imports System.Security.Cryptography
Imports System.Security.Cryptography.X509Certificates
Imports System.IO



Class X509store2

    Shared Sub Main(ByVal args() As String)
        'Create new X509 store called teststore from the local certificate store.
        Dim store As New X509Store("teststore", StoreLocation.CurrentUser)
        store.Open(OpenFlags.ReadWrite)
        Dim certificate As New X509Certificate2()

        'Create certificates from certificate files.
        'You must put in a valid path to three certificates in the following constructors.
        Dim certificate1 As New X509Certificate2("c:\mycerts\*****.cer")
        Dim certificate2 As New X509Certificate2("c:\mycerts\*****.cer")
        Dim certificate5 As New X509Certificate2("c:\mycerts\*****.cer")

        'Create a collection and add two of the certificates.
        Dim collection As New X509Certificate2Collection()
        collection.Add(certificate2)
        collection.Add(certificate5)

        'Add certificates to the store.
        store.Add(certificate1)
        store.AddRange(collection)

        Dim storecollection As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("Store name: {0}", store.Name)
        Console.WriteLine("Store location: {0}", store.Location)
        Dim x509 As X509Certificate2
        For Each x509 In storecollection
            Console.WriteLine("certificate name: {0}", x509.Subject)
        Next x509

        'Remove a certificate.
        store.Remove(certificate1)
        Dim storecollection2 As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("{1}Store name: {0}", store.Name, Environment.NewLine)
        Dim x509a As X509Certificate2
        For Each x509a In storecollection2
            Console.WriteLine("certificate name: {0}", x509a.Subject)
        Next x509a

        'Remove a range of certificates.
        store.RemoveRange(collection)
        Dim storecollection3 As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("{1}Store name: {0}", store.Name, Environment.NewLine)
        If storecollection3.Count = 0 Then
            Console.WriteLine("Store contains no certificates.")
        Else
            Dim x509b As X509Certificate2
            For Each x509b In storecollection3
                Console.WriteLine("certificate name: {0}", x509b.Subject)
            Next x509b
        End If

        'Close the store.
        store.Close()

    End Sub
End Class

Remarques

Utilisez ce constructeur pour créer un magasin X.509 pour l’utilisateur actuel qui correspond aux valeurs énumérées par StoreName.

S’applique à

X509Store(String)

Initialise une nouvelle instance de la classe X509Store avec le nom de magasin spécifié.

public:
 X509Store(System::String ^ storeName);

public X509Store (string storeName);

new System.Security.Cryptography.X509Certificates.X509Store : string -> System.Security.Cryptography.X509Certificates.X509Store

Public Sub New (storeName As String)

Paramètres

storeName: String

Nom du magasin de certificats.

Exemples

#using <System.dll>
#using <System.Security.dll>

using namespace System;
using namespace System::Security::Cryptography;
using namespace System::Security::Cryptography::X509Certificates;
using namespace System::IO;
int main()
{
   
   //Create new X509 store called teststore from the local certificate store.
   X509Store ^ store = gcnew X509Store( "teststore",StoreLocation::CurrentUser );
   store->Open( OpenFlags::ReadWrite );
   X509Certificate2 ^ certificate = gcnew X509Certificate2;
   
   //Create certificates from certificate files.
   //You must put in a valid path to three certificates in the following constructors.
   X509Certificate2 ^ certificate1 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   X509Certificate2 ^ certificate2 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   X509Certificate2 ^ certificate5 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   
   //Create a collection and add two of the certificates.
   X509Certificate2Collection ^ collection = gcnew X509Certificate2Collection;
   collection->Add( certificate2 );
   collection->Add( certificate5 );
   
   //Add certificates to the store.
   store->Add( certificate1 );
   store->AddRange( collection );
   X509Certificate2Collection ^ storecollection = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "Store name: {0}", store->Name );
   Console::WriteLine( "Store location: {0}", store->Location );
   System::Collections::IEnumerator^ myEnum = storecollection->GetEnumerator();
   while ( myEnum->MoveNext() )
   {
      X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum->Current);
      Console::WriteLine( "certificate name: {0}", x509->Subject );
   }

   
   //Remove a certificate.
   store->Remove( certificate1 );
   X509Certificate2Collection ^ storecollection2 = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "{1}Store name: {0}", store->Name, Environment::NewLine );
   System::Collections::IEnumerator^ myEnum1 = storecollection2->GetEnumerator();
   while ( myEnum1->MoveNext() )
   {
      X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum1->Current);
      Console::WriteLine( "certificate name: {0}", x509->Subject );
   }

   
   //Remove a range of certificates.
   store->RemoveRange( collection );
   X509Certificate2Collection ^ storecollection3 = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "{1}Store name: {0}", store->Name, Environment::NewLine );
   if ( storecollection3->Count == 0 )
   {
      Console::WriteLine( "Store contains no certificates." );
   }
   else
   {
      System::Collections::IEnumerator^ myEnum2 = storecollection3->GetEnumerator();
      while ( myEnum2->MoveNext() )
      {
         X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum2->Current);
         Console::WriteLine( "certificate name: {0}", x509->Subject );
      }
   }

   
   //Close the store.
   store->Close();
}

using System;
using System.Security.Cryptography;
using System.Security.Cryptography.X509Certificates;
using System.IO;

public class X509store2
{
    public static void Main (string[] args)
    {
        //Create new X509 store called teststore from the local certificate store.
        X509Store store = new X509Store ("teststore", StoreLocation.CurrentUser);
        store.Open (OpenFlags.ReadWrite);
        X509Certificate2 certificate = new X509Certificate2 ();

        //Create certificates from certificate files.
        //You must put in a valid path to three certificates in the following constructors.
        X509Certificate2 certificate1 = new X509Certificate2 ("c:\\mycerts\\*****.cer");
        X509Certificate2 certificate2 = new X509Certificate2 ("c:\\mycerts\\*****.cer");
        X509Certificate2 certificate5 = new X509Certificate2 ("c:\\mycerts\\*****.cer");

        //Create a collection and add two of the certificates.
        X509Certificate2Collection collection = new X509Certificate2Collection ();
        collection.Add (certificate2);
        collection.Add (certificate5);

        //Add certificates to the store.
        store.Add (certificate1);
        store.AddRange (collection);

        X509Certificate2Collection storecollection = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("Store name: {0}", store.Name);
        Console.WriteLine ("Store location: {0}", store.Location);
        foreach (X509Certificate2 x509 in storecollection)
        {
            Console.WriteLine("certificate name: {0}",x509.Subject);
        }

        //Remove a certificate.
        store.Remove (certificate1);
        X509Certificate2Collection storecollection2 = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("{1}Store name: {0}", store.Name, Environment.NewLine);
        foreach (X509Certificate2 x509 in storecollection2)
        {
            Console.WriteLine ("certificate name: {0}", x509.Subject);
        }

        //Remove a range of certificates.
        store.RemoveRange (collection);
        X509Certificate2Collection storecollection3 = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("{1}Store name: {0}", store.Name, Environment.NewLine);
        if (storecollection3.Count == 0)
        {
            Console.WriteLine ("Store contains no certificates.");
        }
        else
        {
            foreach (X509Certificate2 x509 in storecollection3)
            {
                Console.WriteLine ("certificate name: {0}", x509.Subject);
            }
        }

        //Close the store.
        store.Close ();
    }	
}

Imports System.Security.Cryptography
Imports System.Security.Cryptography.X509Certificates
Imports System.IO



Class X509store2

    Shared Sub Main(ByVal args() As String)
        'Create new X509 store called teststore from the local certificate store.
        Dim store As New X509Store("teststore", StoreLocation.CurrentUser)
        store.Open(OpenFlags.ReadWrite)
        Dim certificate As New X509Certificate2()

        'Create certificates from certificate files.
        'You must put in a valid path to three certificates in the following constructors.
        Dim certificate1 As New X509Certificate2("c:\mycerts\*****.cer")
        Dim certificate2 As New X509Certificate2("c:\mycerts\*****.cer")
        Dim certificate5 As New X509Certificate2("c:\mycerts\*****.cer")

        'Create a collection and add two of the certificates.
        Dim collection As New X509Certificate2Collection()
        collection.Add(certificate2)
        collection.Add(certificate5)

        'Add certificates to the store.
        store.Add(certificate1)
        store.AddRange(collection)

        Dim storecollection As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("Store name: {0}", store.Name)
        Console.WriteLine("Store location: {0}", store.Location)
        Dim x509 As X509Certificate2
        For Each x509 In storecollection
            Console.WriteLine("certificate name: {0}", x509.Subject)
        Next x509

        'Remove a certificate.
        store.Remove(certificate1)
        Dim storecollection2 As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("{1}Store name: {0}", store.Name, Environment.NewLine)
        Dim x509a As X509Certificate2
        For Each x509a In storecollection2
            Console.WriteLine("certificate name: {0}", x509a.Subject)
        Next x509a

        'Remove a range of certificates.
        store.RemoveRange(collection)
        Dim storecollection3 As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("{1}Store name: {0}", store.Name, Environment.NewLine)
        If storecollection3.Count = 0 Then
            Console.WriteLine("Store contains no certificates.")
        Else
            Dim x509b As X509Certificate2
            For Each x509b In storecollection3
                Console.WriteLine("certificate name: {0}", x509b.Subject)
            Next x509b
        End If

        'Close the store.
        store.Close()

    End Sub
End Class

Remarques

Utilisez ce constructeur pour créer un objet à l’aide d’un X509Store nom de magasin X.509 particulier pour l’utilisateur actuel. Pour créer un magasin, spécifiez un nom qui n’existe pas. Un nouveau magasin est créé avec ce nom.

S’applique à

X509Store(StoreName, StoreLocation)

Initialise une nouvelle instance de la classe X509Store à l’aide des valeurs StoreName et StoreLocation spécifiées.

public:
 X509Store(System::Security::Cryptography::X509Certificates::StoreName storeName, System::Security::Cryptography::X509Certificates::StoreLocation storeLocation);

public X509Store (System.Security.Cryptography.X509Certificates.StoreName storeName, System.Security.Cryptography.X509Certificates.StoreLocation storeLocation);

new System.Security.Cryptography.X509Certificates.X509Store : System.Security.Cryptography.X509Certificates.StoreName * System.Security.Cryptography.X509Certificates.StoreLocation -> System.Security.Cryptography.X509Certificates.X509Store

Public Sub New (storeName As StoreName, storeLocation As StoreLocation)

Paramètres

storeName: StoreName

L’une des valeurs de l’énumération qui spécifie le nom du magasin de certificats X.509.

storeLocation: StoreLocation

L’une des valeurs de l’énumération qui spécifie l’emplacement du magasin de certificats X.509.

Exceptions

ArgumentException

storeLocation n’est pas un emplacement valide ou storeName n’est pas un nom valide.

Exemples

#using <System.dll>
#using <System.Security.dll>

using namespace System;
using namespace System::Security::Cryptography;
using namespace System::Security::Cryptography::X509Certificates;
using namespace System::IO;
int main()
{
   
   //Create new X509 store called teststore from the local certificate store.
   X509Store ^ store = gcnew X509Store( "teststore",StoreLocation::CurrentUser );
   store->Open( OpenFlags::ReadWrite );
   X509Certificate2 ^ certificate = gcnew X509Certificate2;
   
   //Create certificates from certificate files.
   //You must put in a valid path to three certificates in the following constructors.
   X509Certificate2 ^ certificate1 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   X509Certificate2 ^ certificate2 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   X509Certificate2 ^ certificate5 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   
   //Create a collection and add two of the certificates.
   X509Certificate2Collection ^ collection = gcnew X509Certificate2Collection;
   collection->Add( certificate2 );
   collection->Add( certificate5 );
   
   //Add certificates to the store.
   store->Add( certificate1 );
   store->AddRange( collection );
   X509Certificate2Collection ^ storecollection = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "Store name: {0}", store->Name );
   Console::WriteLine( "Store location: {0}", store->Location );
   System::Collections::IEnumerator^ myEnum = storecollection->GetEnumerator();
   while ( myEnum->MoveNext() )
   {
      X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum->Current);
      Console::WriteLine( "certificate name: {0}", x509->Subject );
   }

   
   //Remove a certificate.
   store->Remove( certificate1 );
   X509Certificate2Collection ^ storecollection2 = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "{1}Store name: {0}", store->Name, Environment::NewLine );
   System::Collections::IEnumerator^ myEnum1 = storecollection2->GetEnumerator();
   while ( myEnum1->MoveNext() )
   {
      X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum1->Current);
      Console::WriteLine( "certificate name: {0}", x509->Subject );
   }

   
   //Remove a range of certificates.
   store->RemoveRange( collection );
   X509Certificate2Collection ^ storecollection3 = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "{1}Store name: {0}", store->Name, Environment::NewLine );
   if ( storecollection3->Count == 0 )
   {
      Console::WriteLine( "Store contains no certificates." );
   }
   else
   {
      System::Collections::IEnumerator^ myEnum2 = storecollection3->GetEnumerator();
      while ( myEnum2->MoveNext() )
      {
         X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum2->Current);
         Console::WriteLine( "certificate name: {0}", x509->Subject );
      }
   }

   
   //Close the store.
   store->Close();
}

using System;
using System.Security.Cryptography;
using System.Security.Cryptography.X509Certificates;
using System.IO;

public class X509store2
{
    public static void Main (string[] args)
    {
        //Create new X509 store called teststore from the local certificate store.
        X509Store store = new X509Store ("teststore", StoreLocation.CurrentUser);
        store.Open (OpenFlags.ReadWrite);
        X509Certificate2 certificate = new X509Certificate2 ();

        //Create certificates from certificate files.
        //You must put in a valid path to three certificates in the following constructors.
        X509Certificate2 certificate1 = new X509Certificate2 ("c:\\mycerts\\*****.cer");
        X509Certificate2 certificate2 = new X509Certificate2 ("c:\\mycerts\\*****.cer");
        X509Certificate2 certificate5 = new X509Certificate2 ("c:\\mycerts\\*****.cer");

        //Create a collection and add two of the certificates.
        X509Certificate2Collection collection = new X509Certificate2Collection ();
        collection.Add (certificate2);
        collection.Add (certificate5);

        //Add certificates to the store.
        store.Add (certificate1);
        store.AddRange (collection);

        X509Certificate2Collection storecollection = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("Store name: {0}", store.Name);
        Console.WriteLine ("Store location: {0}", store.Location);
        foreach (X509Certificate2 x509 in storecollection)
        {
            Console.WriteLine("certificate name: {0}",x509.Subject);
        }

        //Remove a certificate.
        store.Remove (certificate1);
        X509Certificate2Collection storecollection2 = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("{1}Store name: {0}", store.Name, Environment.NewLine);
        foreach (X509Certificate2 x509 in storecollection2)
        {
            Console.WriteLine ("certificate name: {0}", x509.Subject);
        }

        //Remove a range of certificates.
        store.RemoveRange (collection);
        X509Certificate2Collection storecollection3 = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("{1}Store name: {0}", store.Name, Environment.NewLine);
        if (storecollection3.Count == 0)
        {
            Console.WriteLine ("Store contains no certificates.");
        }
        else
        {
            foreach (X509Certificate2 x509 in storecollection3)
            {
                Console.WriteLine ("certificate name: {0}", x509.Subject);
            }
        }

        //Close the store.
        store.Close ();
    }	
}

Imports System.Security.Cryptography
Imports System.Security.Cryptography.X509Certificates
Imports System.IO



Class X509store2

    Shared Sub Main(ByVal args() As String)
        'Create new X509 store called teststore from the local certificate store.
        Dim store As New X509Store("teststore", StoreLocation.CurrentUser)
        store.Open(OpenFlags.ReadWrite)
        Dim certificate As New X509Certificate2()

        'Create certificates from certificate files.
        'You must put in a valid path to three certificates in the following constructors.
        Dim certificate1 As New X509Certificate2("c:\mycerts\*****.cer")
        Dim certificate2 As New X509Certificate2("c:\mycerts\*****.cer")
        Dim certificate5 As New X509Certificate2("c:\mycerts\*****.cer")

        'Create a collection and add two of the certificates.
        Dim collection As New X509Certificate2Collection()
        collection.Add(certificate2)
        collection.Add(certificate5)

        'Add certificates to the store.
        store.Add(certificate1)
        store.AddRange(collection)

        Dim storecollection As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("Store name: {0}", store.Name)
        Console.WriteLine("Store location: {0}", store.Location)
        Dim x509 As X509Certificate2
        For Each x509 In storecollection
            Console.WriteLine("certificate name: {0}", x509.Subject)
        Next x509

        'Remove a certificate.
        store.Remove(certificate1)
        Dim storecollection2 As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("{1}Store name: {0}", store.Name, Environment.NewLine)
        Dim x509a As X509Certificate2
        For Each x509a In storecollection2
            Console.WriteLine("certificate name: {0}", x509a.Subject)
        Next x509a

        'Remove a range of certificates.
        store.RemoveRange(collection)
        Dim storecollection3 As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("{1}Store name: {0}", store.Name, Environment.NewLine)
        If storecollection3.Count = 0 Then
            Console.WriteLine("Store contains no certificates.")
        Else
            Dim x509b As X509Certificate2
            For Each x509b In storecollection3
                Console.WriteLine("certificate name: {0}", x509b.Subject)
            Next x509b
        End If

        'Close the store.
        store.Close()

    End Sub
End Class

Remarques

Utilisez ce constructeur pour créer un X509Store objet, en spécifiant à la fois le nom du magasin et l’emplacement du magasin.

S’applique à

X509Store(String, StoreLocation)

Initialise une nouvelle instance de la classe X509Store à l’aide d’un nom de magasin et d’un emplacement de magasin spécifiés.

public:
 X509Store(System::String ^ storeName, System::Security::Cryptography::X509Certificates::StoreLocation storeLocation);

public X509Store (string storeName, System.Security.Cryptography.X509Certificates.StoreLocation storeLocation);

new System.Security.Cryptography.X509Certificates.X509Store : string * System.Security.Cryptography.X509Certificates.StoreLocation -> System.Security.Cryptography.X509Certificates.X509Store

Public Sub New (storeName As String, storeLocation As StoreLocation)

Paramètres

storeName: String

Nom du magasin de certificats.

storeLocation: StoreLocation

L’une des valeurs de l’énumération qui spécifie l’emplacement du magasin de certificats X.509.

Exceptions

ArgumentException

storeLocation contient des valeurs non valides.

Exemples

#using <System.dll>
#using <System.Security.dll>

using namespace System;
using namespace System::Security::Cryptography;
using namespace System::Security::Cryptography::X509Certificates;
using namespace System::IO;
int main()
{
   
   //Create new X509 store called teststore from the local certificate store.
   X509Store ^ store = gcnew X509Store( "teststore",StoreLocation::CurrentUser );
   store->Open( OpenFlags::ReadWrite );
   X509Certificate2 ^ certificate = gcnew X509Certificate2;
   
   //Create certificates from certificate files.
   //You must put in a valid path to three certificates in the following constructors.
   X509Certificate2 ^ certificate1 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   X509Certificate2 ^ certificate2 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   X509Certificate2 ^ certificate5 = gcnew X509Certificate2( "c:\\mycerts\\*****.cer" );
   
   //Create a collection and add two of the certificates.
   X509Certificate2Collection ^ collection = gcnew X509Certificate2Collection;
   collection->Add( certificate2 );
   collection->Add( certificate5 );
   
   //Add certificates to the store.
   store->Add( certificate1 );
   store->AddRange( collection );
   X509Certificate2Collection ^ storecollection = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "Store name: {0}", store->Name );
   Console::WriteLine( "Store location: {0}", store->Location );
   System::Collections::IEnumerator^ myEnum = storecollection->GetEnumerator();
   while ( myEnum->MoveNext() )
   {
      X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum->Current);
      Console::WriteLine( "certificate name: {0}", x509->Subject );
   }

   
   //Remove a certificate.
   store->Remove( certificate1 );
   X509Certificate2Collection ^ storecollection2 = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "{1}Store name: {0}", store->Name, Environment::NewLine );
   System::Collections::IEnumerator^ myEnum1 = storecollection2->GetEnumerator();
   while ( myEnum1->MoveNext() )
   {
      X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum1->Current);
      Console::WriteLine( "certificate name: {0}", x509->Subject );
   }

   
   //Remove a range of certificates.
   store->RemoveRange( collection );
   X509Certificate2Collection ^ storecollection3 = dynamic_cast<X509Certificate2Collection^>(store->Certificates);
   Console::WriteLine( "{1}Store name: {0}", store->Name, Environment::NewLine );
   if ( storecollection3->Count == 0 )
   {
      Console::WriteLine( "Store contains no certificates." );
   }
   else
   {
      System::Collections::IEnumerator^ myEnum2 = storecollection3->GetEnumerator();
      while ( myEnum2->MoveNext() )
      {
         X509Certificate2 ^ x509 = safe_cast<X509Certificate2 ^>(myEnum2->Current);
         Console::WriteLine( "certificate name: {0}", x509->Subject );
      }
   }

   
   //Close the store.
   store->Close();
}

using System;
using System.Security.Cryptography;
using System.Security.Cryptography.X509Certificates;
using System.IO;

public class X509store2
{
    public static void Main (string[] args)
    {
        //Create new X509 store called teststore from the local certificate store.
        X509Store store = new X509Store ("teststore", StoreLocation.CurrentUser);
        store.Open (OpenFlags.ReadWrite);
        X509Certificate2 certificate = new X509Certificate2 ();

        //Create certificates from certificate files.
        //You must put in a valid path to three certificates in the following constructors.
        X509Certificate2 certificate1 = new X509Certificate2 ("c:\\mycerts\\*****.cer");
        X509Certificate2 certificate2 = new X509Certificate2 ("c:\\mycerts\\*****.cer");
        X509Certificate2 certificate5 = new X509Certificate2 ("c:\\mycerts\\*****.cer");

        //Create a collection and add two of the certificates.
        X509Certificate2Collection collection = new X509Certificate2Collection ();
        collection.Add (certificate2);
        collection.Add (certificate5);

        //Add certificates to the store.
        store.Add (certificate1);
        store.AddRange (collection);

        X509Certificate2Collection storecollection = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("Store name: {0}", store.Name);
        Console.WriteLine ("Store location: {0}", store.Location);
        foreach (X509Certificate2 x509 in storecollection)
        {
            Console.WriteLine("certificate name: {0}",x509.Subject);
        }

        //Remove a certificate.
        store.Remove (certificate1);
        X509Certificate2Collection storecollection2 = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("{1}Store name: {0}", store.Name, Environment.NewLine);
        foreach (X509Certificate2 x509 in storecollection2)
        {
            Console.WriteLine ("certificate name: {0}", x509.Subject);
        }

        //Remove a range of certificates.
        store.RemoveRange (collection);
        X509Certificate2Collection storecollection3 = (X509Certificate2Collection)store.Certificates;
        Console.WriteLine ("{1}Store name: {0}", store.Name, Environment.NewLine);
        if (storecollection3.Count == 0)
        {
            Console.WriteLine ("Store contains no certificates.");
        }
        else
        {
            foreach (X509Certificate2 x509 in storecollection3)
            {
                Console.WriteLine ("certificate name: {0}", x509.Subject);
            }
        }

        //Close the store.
        store.Close ();
    }	
}

Imports System.Security.Cryptography
Imports System.Security.Cryptography.X509Certificates
Imports System.IO



Class X509store2

    Shared Sub Main(ByVal args() As String)
        'Create new X509 store called teststore from the local certificate store.
        Dim store As New X509Store("teststore", StoreLocation.CurrentUser)
        store.Open(OpenFlags.ReadWrite)
        Dim certificate As New X509Certificate2()

        'Create certificates from certificate files.
        'You must put in a valid path to three certificates in the following constructors.
        Dim certificate1 As New X509Certificate2("c:\mycerts\*****.cer")
        Dim certificate2 As New X509Certificate2("c:\mycerts\*****.cer")
        Dim certificate5 As New X509Certificate2("c:\mycerts\*****.cer")

        'Create a collection and add two of the certificates.
        Dim collection As New X509Certificate2Collection()
        collection.Add(certificate2)
        collection.Add(certificate5)

        'Add certificates to the store.
        store.Add(certificate1)
        store.AddRange(collection)

        Dim storecollection As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("Store name: {0}", store.Name)
        Console.WriteLine("Store location: {0}", store.Location)
        Dim x509 As X509Certificate2
        For Each x509 In storecollection
            Console.WriteLine("certificate name: {0}", x509.Subject)
        Next x509

        'Remove a certificate.
        store.Remove(certificate1)
        Dim storecollection2 As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("{1}Store name: {0}", store.Name, Environment.NewLine)
        Dim x509a As X509Certificate2
        For Each x509a In storecollection2
            Console.WriteLine("certificate name: {0}", x509a.Subject)
        Next x509a

        'Remove a range of certificates.
        store.RemoveRange(collection)
        Dim storecollection3 As X509Certificate2Collection = CType(store.Certificates, X509Certificate2Collection)
        Console.WriteLine("{1}Store name: {0}", store.Name, Environment.NewLine)
        If storecollection3.Count = 0 Then
            Console.WriteLine("Store contains no certificates.")
        Else
            Dim x509b As X509Certificate2
            For Each x509b In storecollection3
                Console.WriteLine("certificate name: {0}", x509b.Subject)
            Next x509b
        End If

        'Close the store.
        store.Close()

    End Sub
End Class

Remarques

Utilisez ce constructeur pour créer un objet à l’aide d’un nom de magasin et d’un X509Store emplacement. Pour créer un magasin, spécifiez un nom qui n’existe pas. Un nouveau magasin est créé avec ce nom.

S’applique à

X509Store(StoreName, StoreLocation, OpenFlags)

Initialise une nouvelle instance de la classe X509Store à l’aide du nom de magasin et des valeurs d’emplacement de magasin spécifiés, puis l’ouvre en utilisant les indicateurs spécifiés.

public:
 X509Store(System::Security::Cryptography::X509Certificates::StoreName storeName, System::Security::Cryptography::X509Certificates::StoreLocation storeLocation, System::Security::Cryptography::X509Certificates::OpenFlags flags);

public X509Store (System.Security.Cryptography.X509Certificates.StoreName storeName, System.Security.Cryptography.X509Certificates.StoreLocation storeLocation, System.Security.Cryptography.X509Certificates.OpenFlags flags);

new System.Security.Cryptography.X509Certificates.X509Store : System.Security.Cryptography.X509Certificates.StoreName * System.Security.Cryptography.X509Certificates.StoreLocation * System.Security.Cryptography.X509Certificates.OpenFlags -> System.Security.Cryptography.X509Certificates.X509Store

Public Sub New (storeName As StoreName, storeLocation As StoreLocation, flags As OpenFlags)

Paramètres

storeName: StoreName

L’une des valeurs de l’énumération qui spécifie le nom du magasin de certificats X.509.

storeLocation: StoreLocation

L’une des valeurs de l’énumération qui spécifie l’emplacement du magasin de certificats X.509.

flags: OpenFlags

Combinaison au niveau du bit de valeurs d’énumération, qui spécifie la façon d’ouvrir le magasin de certificats X.509.

Exceptions

ArgumentException

storeLocation n’est pas un emplacement valide ou storeName n’est pas un nom valide.

CryptographicException

Impossible d’ouvrir le magasin.

S’applique à

X509Store(String, StoreLocation, OpenFlags)

Initialise une nouvelle instance de la classe X509Store à l’aide du nom de magasin et des valeurs d’emplacement de magasin spécifiés, puis l’ouvre en utilisant les indicateurs spécifiés.

public:
 X509Store(System::String ^ storeName, System::Security::Cryptography::X509Certificates::StoreLocation storeLocation, System::Security::Cryptography::X509Certificates::OpenFlags flags);

public X509Store (string storeName, System.Security.Cryptography.X509Certificates.StoreLocation storeLocation, System.Security.Cryptography.X509Certificates.OpenFlags flags);

new System.Security.Cryptography.X509Certificates.X509Store : string * System.Security.Cryptography.X509Certificates.StoreLocation * System.Security.Cryptography.X509Certificates.OpenFlags -> System.Security.Cryptography.X509Certificates.X509Store

Public Sub New (storeName As String, storeLocation As StoreLocation, flags As OpenFlags)

Paramètres

storeName: String

Nom du magasin de certificats.

storeLocation: StoreLocation

L’une des valeurs de l’énumération qui spécifie l’emplacement du magasin de certificats X.509.

flags: OpenFlags

Combinaison au niveau du bit de valeurs d’énumération, qui spécifie la façon d’ouvrir le magasin de certificats X.509.

Exceptions

ArgumentException

storeLocation n’est pas un emplacement valide.

S’applique à

X509Store Constructeurs

Définition

Surcharges

X509Store()

Exemples

Remarques

S’applique à

X509Store(IntPtr)

Paramètres

Exceptions

Remarques

S’applique à

X509Store(StoreLocation)

Paramètres

Exemples

Remarques

S’applique à

X509Store(StoreName)

Paramètres

Exceptions

Exemples

Remarques

S’applique à

X509Store(String)

Paramètres

Exemples

Remarques

S’applique à

X509Store(StoreName, StoreLocation)

Paramètres

Exceptions

Exemples

Remarques

S’applique à

X509Store(String, StoreLocation)

Paramètres

Exceptions

Exemples

Remarques

S’applique à

X509Store(StoreName, StoreLocation, OpenFlags)

Paramètres

Exceptions

S’applique à

X509Store(String, StoreLocation, OpenFlags)

Paramètres

Exceptions

S’applique à

Ressources supplémentaires