EventWaitHandle.GetAccessControl Méthode
Définition
Important
Certaines informations portent sur la préversion du produit qui est susceptible d’être en grande partie modifiée avant sa publication. Microsoft exclut toute garantie, expresse ou implicite, concernant les informations fournies ici.
Obtient un objet EventWaitHandleSecurity qui représente la sécurité de contrôle d'accès pour l'événement système nommé représenté par l'objet EventWaitHandle actuel.
public:
System::Security::AccessControl::EventWaitHandleSecurity ^ GetAccessControl();public System.Security.AccessControl.EventWaitHandleSecurity GetAccessControl ();member this.GetAccessControl : unit -> System.Security.AccessControl.EventWaitHandleSecurityPublic Function GetAccessControl () As EventWaitHandleSecurityRetours
Objet EventWaitHandleSecurity qui représente la sécurité de contrôle d’accès pour l’événement système nommé.
Exceptions
L’objet EventWaitHandle actif représente un événement système nommé, et l’utilisateur ne dispose pas de ReadPermissions.
- ou - L'objet EventWaitHandle actuel représente un événement système nommé ; il n'a pas été ouvert avec ReadPermissions.
La méthode Close() a été précédemment appelée sur ce EventWaitHandle.
Exemples
L’exemple de code suivant illustre le comportement interprocesseur d’un événement système nommé avec la sécurité du contrôle d’accès. L’exemple utilise la OpenExisting(String) surcharge de méthode pour tester l’existence d’un événement nommé.
Si l’événement n’existe pas, il est créé avec la propriété initiale et la sécurité du contrôle d’accès qui refuse à l’utilisateur actuel le droit d’utiliser l’événement, mais accorde le droit de lire et de modifier les autorisations sur l’événement.
Si vous exécutez l’exemple compilé à partir de deux fenêtres de commande, la deuxième copie lève une exception de violation d’accès sur l’appel à OpenExisting(String). L’exception est interceptée et l’exemple utilise la surcharge de OpenExisting(String, EventWaitHandleRights) méthode pour attendre l’événement avec les droits nécessaires pour lire et modifier les autorisations.
Une fois que les autorisations ont été lues, à l’aide de la GetAccessControl méthode et modifiées, l’événement est ouvert avec les droits requis pour attendre et le signaler. Si vous exécutez l’exemple compilé à partir d’une troisième fenêtre de commande, l’exemple s’exécute à l’aide des nouvelles autorisations.
using namespace System;
using namespace System::Threading;
using namespace System::Security::AccessControl;
using namespace System::Security::Permissions;
public ref class Example
{
public:
[SecurityPermissionAttribute(SecurityAction::Demand,Flags=SecurityPermissionFlag::UnmanagedCode)]
static void Main()
{
String^ ewhName = L"EventWaitHandleExample5";
EventWaitHandle^ ewh = nullptr;
bool doesNotExist = false;
bool unauthorized = false;
// The value of this variable is set by the event
// constructor. It is true if the named system event was
// created, and false if the named event already existed.
//
bool wasCreated;
// Attempt to open the named event.
try
{
// Open the event with (EventWaitHandleRights.Synchronize
// | EventWaitHandleRights.Modify), to wait on and
// signal the named event.
//
ewh = EventWaitHandle::OpenExisting( ewhName );
}
catch ( WaitHandleCannotBeOpenedException^ )
{
Console::WriteLine( L"Named event does not exist." );
doesNotExist = true;
}
catch ( UnauthorizedAccessException^ ex )
{
Console::WriteLine( L"Unauthorized access: {0}", ex->Message );
unauthorized = true;
}
// There are three cases: (1) The event does not exist.
// (2) The event exists, but the current user doesn't
// have access. (3) The event exists and the user has
// access.
//
if ( doesNotExist )
{
// The event does not exist, so create it.
// Create an access control list (ACL) that denies the
// current user the right to wait on or signal the
// event, but allows the right to read and change
// security information for the event.
//
String^ user = String::Concat( Environment::UserDomainName, L"\\",
Environment::UserName );
EventWaitHandleSecurity^ ewhSec = gcnew EventWaitHandleSecurity;
//following constructor fails
EventWaitHandleAccessRule^ rule = gcnew EventWaitHandleAccessRule(
user,
static_cast<EventWaitHandleRights>(
EventWaitHandleRights::Synchronize |
EventWaitHandleRights::Modify),
AccessControlType::Deny );
ewhSec->AddAccessRule( rule );
rule = gcnew EventWaitHandleAccessRule( user,
static_cast<EventWaitHandleRights>(
EventWaitHandleRights::ReadPermissions |
EventWaitHandleRights::ChangePermissions),
AccessControlType::Allow );
ewhSec->AddAccessRule( rule );
// Create an EventWaitHandle object that represents
// the system event named by the constant 'ewhName',
// initially signaled, with automatic reset, and with
// the specified security access. The Boolean value that
// indicates creation of the underlying system object
// is placed in wasCreated.
//
ewh = gcnew EventWaitHandle( true,
EventResetMode::AutoReset,
ewhName,
wasCreated,
ewhSec );
// If the named system event was created, it can be
// used by the current instance of this program, even
// though the current user is denied access. The current
// program owns the event. Otherwise, exit the program.
//
if ( wasCreated )
{
Console::WriteLine( L"Created the named event." );
}
else
{
Console::WriteLine( L"Unable to create the event." );
return;
}
}
else if ( unauthorized )
{
// Open the event to read and change the access control
// security. The access control security defined above
// allows the current user to do this.
//
try
{
ewh = EventWaitHandle::OpenExisting( ewhName,
static_cast<EventWaitHandleRights>(
EventWaitHandleRights::ReadPermissions |
EventWaitHandleRights::ChangePermissions) );
// Get the current ACL. This requires
// EventWaitHandleRights.ReadPermissions.
EventWaitHandleSecurity^ ewhSec = ewh->GetAccessControl();
String^ user = String::Concat( Environment::UserDomainName, L"\\",
Environment::UserName );
// First, the rule that denied the current user
// the right to enter and release the event must
// be removed.
EventWaitHandleAccessRule^ rule = gcnew EventWaitHandleAccessRule(
user,
static_cast<EventWaitHandleRights>(
EventWaitHandleRights::Synchronize |
EventWaitHandleRights::Modify),
AccessControlType::Deny );
ewhSec->RemoveAccessRule( rule );
// Now grant the user the correct rights.
//
rule = gcnew EventWaitHandleAccessRule( user,
static_cast<EventWaitHandleRights>(
EventWaitHandleRights::Synchronize |
EventWaitHandleRights::Modify),
AccessControlType::Allow );
ewhSec->AddAccessRule( rule );
// Update the ACL. This requires
// EventWaitHandleRights.ChangePermissions.
ewh->SetAccessControl( ewhSec );
Console::WriteLine( L"Updated event security." );
// Open the event with (EventWaitHandleRights.Synchronize
// | EventWaitHandleRights.Modify), the rights required
// to wait on and signal the event.
//
ewh = EventWaitHandle::OpenExisting( ewhName );
}
catch ( UnauthorizedAccessException^ ex )
{
Console::WriteLine( L"Unable to change permissions: {0}",
ex->Message );
return;
}
}
// Wait on the event, and hold it until the program
// exits.
//
try
{
Console::WriteLine( L"Wait on the event." );
ewh->WaitOne();
Console::WriteLine( L"Event was signaled." );
Console::WriteLine( L"Press the Enter key to signal the event and exit." );
Console::ReadLine();
}
catch ( UnauthorizedAccessException^ ex )
{
Console::WriteLine( L"Unauthorized access: {0}", ex->Message );
}
finally
{
ewh->Set();
}
}
};
int main()
{
Example::Main();
}
using System;
using System.Threading;
using System.Security.AccessControl;
internal class Example
{
internal static void Main()
{
const string ewhName = "EventWaitHandleExample5";
EventWaitHandle ewh = null;
bool doesNotExist = false;
bool unauthorized = false;
// The value of this variable is set by the event
// constructor. It is true if the named system event was
// created, and false if the named event already existed.
//
bool wasCreated;
// Attempt to open the named event.
try
{
// Open the event with (EventWaitHandleRights.Synchronize
// | EventWaitHandleRights.Modify), to wait on and
// signal the named event.
//
ewh = EventWaitHandle.OpenExisting(ewhName);
}
catch (WaitHandleCannotBeOpenedException)
{
Console.WriteLine("Named event does not exist.");
doesNotExist = true;
}
catch (UnauthorizedAccessException ex)
{
Console.WriteLine("Unauthorized access: {0}", ex.Message);
unauthorized = true;
}
// There are three cases: (1) The event does not exist.
// (2) The event exists, but the current user doesn't
// have access. (3) The event exists and the user has
// access.
//
if (doesNotExist)
{
// The event does not exist, so create it.
// Create an access control list (ACL) that denies the
// current user the right to wait on or signal the
// event, but allows the right to read and change
// security information for the event.
//
string user = Environment.UserDomainName + "\\"
+ Environment.UserName;
EventWaitHandleSecurity ewhSec =
new EventWaitHandleSecurity();
EventWaitHandleAccessRule rule =
new EventWaitHandleAccessRule(user,
EventWaitHandleRights.Synchronize |
EventWaitHandleRights.Modify,
AccessControlType.Deny);
ewhSec.AddAccessRule(rule);
rule = new EventWaitHandleAccessRule(user,
EventWaitHandleRights.ReadPermissions |
EventWaitHandleRights.ChangePermissions,
AccessControlType.Allow);
ewhSec.AddAccessRule(rule);
// Create an EventWaitHandle object that represents
// the system event named by the constant 'ewhName',
// initially signaled, with automatic reset, and with
// the specified security access. The Boolean value that
// indicates creation of the underlying system object
// is placed in wasCreated.
//
ewh = new EventWaitHandle(true,
EventResetMode.AutoReset,
ewhName,
out wasCreated,
ewhSec);
// If the named system event was created, it can be
// used by the current instance of this program, even
// though the current user is denied access. The current
// program owns the event. Otherwise, exit the program.
//
if (wasCreated)
{
Console.WriteLine("Created the named event.");
}
else
{
Console.WriteLine("Unable to create the event.");
return;
}
}
else if (unauthorized)
{
// Open the event to read and change the access control
// security. The access control security defined above
// allows the current user to do this.
//
try
{
ewh = EventWaitHandle.OpenExisting(ewhName,
EventWaitHandleRights.ReadPermissions |
EventWaitHandleRights.ChangePermissions);
// Get the current ACL. This requires
// EventWaitHandleRights.ReadPermissions.
EventWaitHandleSecurity ewhSec = ewh.GetAccessControl();
string user = Environment.UserDomainName + "\\"
+ Environment.UserName;
// First, the rule that denied the current user
// the right to enter and release the event must
// be removed.
EventWaitHandleAccessRule rule =
new EventWaitHandleAccessRule(user,
EventWaitHandleRights.Synchronize |
EventWaitHandleRights.Modify,
AccessControlType.Deny);
ewhSec.RemoveAccessRule(rule);
// Now grant the user the correct rights.
//
rule = new EventWaitHandleAccessRule(user,
EventWaitHandleRights.Synchronize |
EventWaitHandleRights.Modify,
AccessControlType.Allow);
ewhSec.AddAccessRule(rule);
// Update the ACL. This requires
// EventWaitHandleRights.ChangePermissions.
ewh.SetAccessControl(ewhSec);
Console.WriteLine("Updated event security.");
// Open the event with (EventWaitHandleRights.Synchronize
// | EventWaitHandleRights.Modify), the rights required
// to wait on and signal the event.
//
ewh = EventWaitHandle.OpenExisting(ewhName);
}
catch (UnauthorizedAccessException ex)
{
Console.WriteLine("Unable to change permissions: {0}",
ex.Message);
return;
}
}
// Wait on the event, and hold it until the program
// exits.
//
try
{
Console.WriteLine("Wait on the event.");
ewh.WaitOne();
Console.WriteLine("Event was signaled.");
Console.WriteLine("Press the Enter key to signal the event and exit.");
Console.ReadLine();
}
catch (UnauthorizedAccessException ex)
{
Console.WriteLine("Unauthorized access: {0}", ex.Message);
}
finally
{
ewh.Set();
}
}
}
Imports System.Threading
Imports System.Security.AccessControl
Friend Class Example
<MTAThread> _
Friend Shared Sub Main()
Const ewhName As String = "EventWaitHandleExample5"
Dim ewh As EventWaitHandle = Nothing
Dim doesNotExist as Boolean = False
Dim unauthorized As Boolean = False
' The value of this variable is set by the event
' constructor. It is True if the named system event was
' created, and False if the named event already existed.
'
Dim wasCreated As Boolean
' Attempt to open the named event.
Try
' Open the event with (EventWaitHandleRights.Synchronize
' Or EventWaitHandleRights.Modify), to wait on and
' signal the named event.
'
ewh = EventWaitHandle.OpenExisting(ewhName)
Catch ex As WaitHandleCannotBeOpenedException
Console.WriteLine("Named event does not exist.")
doesNotExist = True
Catch ex As UnauthorizedAccessException
Console.WriteLine("Unauthorized access: {0}", ex.Message)
unauthorized = True
End Try
' There are three cases: (1) The event does not exist.
' (2) The event exists, but the current user doesn't
' have access. (3) The event exists and the user has
' access.
'
If doesNotExist Then
' The event does not exist, so create it.
' Create an access control list (ACL) that denies the
' current user the right to wait on or signal the
' event, but allows the right to read and change
' security information for the event.
'
Dim user As String = Environment.UserDomainName _
& "\" & Environment.UserName
Dim ewhSec As New EventWaitHandleSecurity()
Dim rule As New EventWaitHandleAccessRule(user, _
EventWaitHandleRights.Synchronize Or _
EventWaitHandleRights.Modify, _
AccessControlType.Deny)
ewhSec.AddAccessRule(rule)
rule = New EventWaitHandleAccessRule(user, _
EventWaitHandleRights.ReadPermissions Or _
EventWaitHandleRights.ChangePermissions, _
AccessControlType.Allow)
ewhSec.AddAccessRule(rule)
' Create an EventWaitHandle object that represents
' the system event named by the constant 'ewhName',
' initially signaled, with automatic reset, and with
' the specified security access. The Boolean value that
' indicates creation of the underlying system object
' is placed in wasCreated.
'
ewh = New EventWaitHandle(True, _
EventResetMode.AutoReset, ewhName, _
wasCreated, ewhSec)
' If the named system event was created, it can be
' used by the current instance of this program, even
' though the current user is denied access. The current
' program owns the event. Otherwise, exit the program.
'
If wasCreated Then
Console.WriteLine("Created the named event.")
Else
Console.WriteLine("Unable to create the event.")
Return
End If
ElseIf unauthorized Then
' Open the event to read and change the access control
' security. The access control security defined above
' allows the current user to do this.
'
Try
ewh = EventWaitHandle.OpenExisting(ewhName, _
EventWaitHandleRights.ReadPermissions Or _
EventWaitHandleRights.ChangePermissions)
' Get the current ACL. This requires
' EventWaitHandleRights.ReadPermissions.
Dim ewhSec As EventWaitHandleSecurity = _
ewh.GetAccessControl()
Dim user As String = Environment.UserDomainName _
& "\" & Environment.UserName
' First, the rule that denied the current user
' the right to enter and release the event must
' be removed.
Dim rule As New EventWaitHandleAccessRule(user, _
EventWaitHandleRights.Synchronize Or _
EventWaitHandleRights.Modify, _
AccessControlType.Deny)
ewhSec.RemoveAccessRule(rule)
' Now grant the user the correct rights.
'
rule = New EventWaitHandleAccessRule(user, _
EventWaitHandleRights.Synchronize Or _
EventWaitHandleRights.Modify, _
AccessControlType.Allow)
ewhSec.AddAccessRule(rule)
' Update the ACL. This requires
' EventWaitHandleRights.ChangePermissions.
ewh.SetAccessControl(ewhSec)
Console.WriteLine("Updated event security.")
' Open the event with (EventWaitHandleRights.Synchronize
' Or EventWaitHandleRights.Modify), the rights required
' to wait on and signal the event.
'
ewh = EventWaitHandle.OpenExisting(ewhName)
Catch ex As UnauthorizedAccessException
Console.WriteLine("Unable to change permissions: {0}", _
ex.Message)
Return
End Try
End If
' Wait on the event, and hold it until the program
' exits.
'
Try
Console.WriteLine("Wait on the event.")
ewh.WaitOne()
Console.WriteLine("Event was signaled.")
Console.WriteLine("Press the Enter key to signal the event and exit.")
Console.ReadLine()
Catch ex As UnauthorizedAccessException
Console.WriteLine("Unauthorized access: {0}", _
ex.Message)
Finally
ewh.Set()
End Try
End Sub
End Class
Remarques
La GetAccessControl méthode utilise la combinaison suivante d’indicateurs (combiné à l’aide de l’opération OR au niveau du bit) pour rechercher des autorisations : AccessControlSections.Access, AccessControlSections.Owneret AccessControlSections.Group.
L’utilisateur doit avoir EventWaitHandleRights.ReadPermissions les droits nécessaires pour appeler cette méthode, et l’événement doit avoir été ouvert avec l’indicateur EventWaitHandleRights.ReadPermissions .