Create menu navigation
You can use the New menu navigation entry page to create single or multiple key mappings for business or non-business hours main menu prompts for auto attendants. You can define the action that will be performed when a key on the telephone keypad is pressed, for example, transferring the call to an extension number or another auto attendant.
For additional management tasks related to UM auto attendants, see UM auto attendant procedures.
What do you need to know before you begin?
Estimated time to complete: 5 minutes.
You need to be assigned permissions before you can perform this procedure or procedures. To see what permissions you need, see the "UM auto attendants" entry in the Unified Messaging Permissions topic.
Before you perform these procedures, confirm that a UM dial plan has been created. For detailed steps, see Create a UM dial plan.
Before you perform these procedures, confirm that a UM auto attendant has been created. For detailed steps, see Create a UM auto attendant.
For information about keyboard shortcuts that may apply to the procedures in this topic, see Keyboard shortcuts in the Exchange admin center.
What do you want to do?
Use the EAC to configure UM auto attendant navigation menus
In the EAC, navigate to Unified Messaging > UM dial plans. In the list view, select the UM dial plan you want to change, and then click Edit.
On the UM Dial Plan page, under UM Auto Attendants, select the UM auto attendant for which you want to create menu navigation. On the toolbar, click Edit.
On the UM Auto Attendant page, click Menu navigation, select either Enable business hours menu navigation or Enable non-business hours menu navigation, and then click Add.
On the New menu navigation entry page, configure the following:
Prompt Use this box to type the name of the new navigation menu. The navigation menu name is used for display purposes only. This is a required field.
Because you may want to specify multiple new navigation menus, we recommend that you use meaningful names for your key mappings. The maximum length of the name for the key mapping is 64 characters, and it can include spaces. However, it can't include any of the following characters: " / \ [ ] : ; | = , + * ? < >.
When this key is pressed Use this list to enable key mapping. The key mapping is the number key that a caller presses to have the auto attendant perform a specific operation, for example, forwarding the caller to another auto attendant or to an operator. By default, no entries are defined.
Use the drop-down list to select the numeric key (from 1 through 9) that the caller must press. Zero (0) is reserved for the auto attendant operator.
If you select Time Out from the drop down list, it enables callers to be transferred to an extension number or to another auto attendant if they don't press a key on the telephone keypad. For example, "Please stay on the line and your call will be answered by the next available representative." The default setting is 5 seconds. If you enable this option, a blank key mapping will be created.
Play the following audio file Use this option to select a previously recorded audio file for callers. Click Change, and then click Browse to locate the audio file.
Perform this additional action Select one of the following options to define the action that you want the auto attendant to perform for the caller:
None If you don't want to the auto attendant to transfer the call to an extension or to another auto attendant, or leave a message for a user, use this option.
Transfer to this extension Select this option to enable calls to be transferred to an extension number. If you enable this option, use the box to type the extension where the call will be transferred. This field allows only numeric characters. It can't include any of the following characters: " / \ [ ] : ; | = , + * ? < >.
Transfer to this UM auto attendant Select this option to transfer the call to an auto attendant. Click Browse to locate the auto attendant that you want to use. Before you enable this option, you must first create and configure the auto attendant. This option is used when you create a parent/child structure of UM auto attendants.
Leave a voice message for this user Select this option to enable a caller to leave a voice mail message for a user that's on the same dial plan as the UM auto attendant that you're configuring. When a caller chooses this option from an auto attendant menu, they'll be prompted to leave a voice message for the user that was selected. Click Browse to locate the UM-enabled user.
Announce business location Select this option to enable a caller to choose an auto attendant menu option and hear the location of the business that's configured on the UM auto attendant. To enable this to work correctly, you must first enter the business location in the Business location box on the General page on the UM auto attendant.
Announce business hours Select this option to enable a caller to choose an auto attendant menu option and hear the hours of operation for the business that's configured on the UM auto attendant. To enable this to work correctly, you must first configure the business hours on the Business hours page on the UM auto attendant.
Click OK to create the new menu navigation.
On the UM Auto Attendant page, click Save to save your changes.
Use the Shell to configure UM auto attendant key mappings
This example enables business hours key mappings so that:
When callers press 1, they will be forwarded to another UM auto attendant named
When they press 2, they will be forwarded to extension number 12345 for Support.
When they press 3, they will be sent to another auto attendant that will play an audio file.
Set-UMAutoAttendant -id MyAutoAttendant -BusinessHoursKeyMappingEnabled $true -BusinessHoursKeyMapping "1,Sales,,SalesAutoAttendant","2,Support,12345","3,Directions,,,directions.wav"
This example sets key mappings defined in a comma-separated value (.csv) file. You must first create the .csv file with the following headings and the correct entry: <key>,<description>,[<extension>],[<autoattendant name>],[<promptfilenamepath>],[<asrphrase1;asrphrase2>],[<leavevoicemailfor>],[<transfertomailbox>]. The values in brackets are optional. After creating the .csv file, import the .csv file using the Import-csv cmdlet.
$o = Import-csv -path "C:\UMFiles\AutoAttendants\keymappings.csv" Set-UMAutoAttendant MyAutoAttendant -BusinessHoursKeyMapping $o
This example exports key mappings from an existing UM auto attendant into a .csv file, and then imports the same key mappings into another UM auto attendant. You could also export the key mappings to a .csv file, edit or modify the key mappings in the .csv file, and then import those key mappings into another UM auto attendant.
$aa = Get-UMAutoAttendant -id MyAutoAttendant $aa1 = Get-UMAutoAttendant -id MyAutoAttendant2 $aa.BusinessHoursKeyMapping | Export-csv -path "C:\UMFiles\AutoAttendants\keymappings.csv" $aa1.BusinessHoursKeyMapping = (Import-csv -path "C:\UMFiles\AutoAttendants\keymappings.csv")