Explains how to install, import, and use PowerShell modules.
A module is a package that contains PowerShell commands, such as cmdlets, providers, functions, workflows, variables, and aliases.
People who write commands can use modules to organize their commands and share them with others. People who receive modules can add the commands in the modules to their PowerShell sessions and use them just like the built-in commands.
This topic explains how to use PowerShell modules. For information about how to write PowerShell modules, see Writing a PowerShell Module.
What Is a Module?
A module is a package of commands. All cmdlets and providers in your session are added by a module or a snap-in.
Beginning in PowerShell 3.0, PowerShell imports modules automatically the first time that you run any command in an installed module. You can now use the commands in a module without any set-up or profile configuration, so there's no need to manage modules after you install them on your computer.
The commands in a module are also easier to find. The
Get-Command cmdlet now
gets all commands in all installed modules, even if they are not yet in the
session, so you can find a command and use it without importing.
Any of the following commands will import a module into your session.
Run the Command
Get-Mailbox -Identity Chris
Get the Command
Get Help for the Command
Get-Command commands that include a wildcard character (*) are considered
to be for discovery, not use, and do not import any modules.
Only modules that are stored in the location specified by the PSModulePath
environment variable are automatically imported. Modules in other locations
must be imported by running the
Also, commands that use PowerShell providers do not automatically import a
module. For example, if you use a command that requires the WSMan: drive, such
Get-PSSessionConfiguration cmdlet, you might need to run the
Import-Module cmdlet to import the Microsoft.WSMan.Management module that
You can still run the
Import-Module command to import a module and
$PSModuleAutoloadingPreference variable to enable, disable and
configure automatic importing of modules. For more information, see
How to Use a Module
To use a module, perform the following tasks:
- Install the module. (This is often done for you.)
- Find the commands that the module added.
- Use the commands that the module added.
This topic explains how to perform these tasks. It also includes other useful information about managing modules.
How to Install a Module
If you receive a module as a folder with files in it, you need to install it on your computer before you can use it in PowerShell.
Most modules are installed for you. PowerShell comes with several preinstalled modules, sometimes called the "core" modules. On Windows-based computers, if features that are included with the operating system have cmdlets to manage them, those modules are preinstalled. When you install a Windows feature, by using, for example, the Add Roles and Features Wizard in Server Manager, or the Turn Windows features on or off dialog box in Control Panel, any PowerShell modules that are part of the feature are installed. Many other modules come in an installer or Setup program that installs the module.
Create a Modules directory for the current user if one does not exist. To create a Modules directory, type:
New-Item -Type Directory -Path $HOME\Documents\WindowsPowerShell\Modules
Copy the entire module folder into the Modules directory. You can use any
method to copy the folder, including Windows Explorer and Cmd.exe, as well as
PowerShell. In PowerShell use the
Copy-Item cmdlet. For example, to copy the
MyModule folder from
C:\ps-test\MyModule to the Modules directory, type:
Copy-Item -Path C:\ps-test\MyModule -Destination ` $HOME\Documents\WindowsPowerShell\Modules
You can install a module in any location, but installing your modules in a default module location makes them easier to manage. For more information about the default module locations, see the "Module and DSC Resource Locations, and PSModulePath" section.
How to Find Installed Modules
To find modules that are installed in a default module location, but not yet imported into your session, type:
To find the modules that have already been imported into your session, at the PowerShell prompt, type:
For more information about the
Get-Module cmdlet, see
How to Find the Commands in a Module
Get-Command cmdlet to find all available commands. You can use the
parameters of the
Get-Command cmdlet to filter commands such as by module,
name, and noun.
To find all commands in a module, type:
Get-Command -Module <module-name>
For example, to find the commands in the BitsTransfer module, type:
Get-Command -Module BitsTransfer
For more information about the
Get-Command cmdlet, see
How to Get Help for the Commands in a Module
If the module contains Help files for the commands that it exports, the
Get-Help cmdlet will display the Help topics. Use the same
command format that you would use to get help for any command in PowerShell.
Beginning in PowerShell 3.0, you can download Help files for a module and download updates to the Help files so they are never obsolete.
To get help for a commands in a module, type:
To get help online for command in a module, type:
Get-Help <command-name> -Online
To download and install the help files for the commands in a module, type:
Update-Help -Module <module-name>
How to Import a Module
You might have to import a module or import a module file. Importing is
required when a module is not installed in the locations specified by the
PSModulePath environment variable,
$env:PSModulePath, or the module
consists of file, such as a .dll or .psm1 file, instead of typical module that
is delivered as a folder.
You might also choose to import a module so that you can use the parameters of
Import-Module command, such as the Prefix parameter, which adds a
distinctive prefix to the noun names of all imported commands, or the
NoClobber parameter, which prevents the module from adding commands that
would hide or replace existing commands in the session.
To import modules, use the
To import modules in a PSModulePath location into the current session, use the following command format.
For example, the following command imports the BitsTransfer module into the current session.
To import a module that is not in a default module location, use the fully qualified path to the module folder in the command.
For example, to add the TestCmdlets module in the C:\ps-test directory to your session, type:
To import a module file that is not contained in a module folder, use the fully qualified path to the module file in the command.
For example, to add the TestCmdlets.dll module in the C:\ps-test directory to your session, type:
For more information about adding modules to your session, see Import-Module.
How to Import a Module into Every Session
Import-Module command imports modules into your current PowerShell
session. This command affects only the current session.
To import a module into every PowerShell session that you
start, add the
Import-Module command to your PowerShell
For more information about profiles, see about_Profiles.
How to Remove a Module
When you remove a module, the commands that the module added are deleted from the session.
To remove a module from your session, use the following command format.
For example, the following command removes the BitsTransfer module from the current session.
Removing a module reverses the operation of importing a module. Removing
a module does not uninstall the module. For more information about the
Remove-Module cmdlet, see Remove-Module.
Module and DSC Resource Locations, and PSModulePath
The following are default locations for PowerShell modules. Starting in PowerShell 4.0, with the introduction of DSC, a new default module and DSC resource folder was introduced. For more information about DSC, see about_DesiredStateConfiguration.
$env:windir\System32\WindowsPowerShell\v1.0\Modules) System modules are those that ship with Windows and PowerShell.
Starting in PowerShell 4.0, when PowerShell Desired State Configuration (DSC) was introduced, DSC resources that are included with PowerShell are also stored in
$PSHOME\Modules, in the
$env:UserProfile\My Documents\WindowsPowerShell\Modules) This is the location for user-added modules prior to PowerShell 4.0.
In PowerShell 4.0 and later releases of PowerShell, user-added modules and DSC
resources are stored in
C:\Program Files\WindowsPowerShell\Modules. Modules
and DSC resources in this location are accessible by all users of the
computer. This change was required because the DSC engine runs as local
system, and could not access user-specific paths, such as
Starting in PowerShell 5.0, with the addition of the PowerShellGet module, and
the PowerShell Gallery of community and
Microsoft-created resources, the
Install-Module command installs modules and
DSC resources to
C:\Program Files\WindowsPowerShell\Modules by default.
Note: To add or change files in the
$env:Windir\System32 directory, start
PowerShell with the "Run as administrator" option.
You can change the default module locations on your system by changing the
value of the PSModulePath environment variable,
PSModulePath environment variable is modeled on the Path environment
variable and has the same format.
To view the default module locations, type:
To add a default module location, use the following command format.
$Env:PSModulePath = $Env:PSModulePath + ";<path>"
The semi-colon (;) in the command separates the new path from the path that precedes it in the list.
For example, to add the
C:\ps-test\Modules directory, type:
$Env:PSModulePath + ";C:\ps-test\Modules"
To add a default module location on Linux or MacOS, use the following command format:
$Env:PSModulePath += ":<path>"
For example, to add the "/usr/local/Fabrikam/Modules" directory to the value of the PSModulePath environment variable, type:
$Env:PSModulePath += ":/usr/local/Fabrikam/Modules"
On Linux or MacOS, the colon (:) in the command separates the new path from the path that precedes it in the list.
When you add a path to PSModulePath,
commands include modules in that path.
The value that you set affects only the current session. To make the change persistent, add the command to your PowerShell profile or use System in Control Panel to change the value of the PSModulePath environment variable in the registry.
Also, to make the change persistent, you can also use the SetEnvironmentVariable method of the System.Environment class to add a Path to the PSModulePath environment variable.
For more information about the PSModulePath variable, see about_Environment_Variables.
Modules and Name Conflicts
Name conflicts occur when more than one command in the session has the same name. Importing a module causes a name conflict when commands in the module have the same names as commands or items in the session.
Name conflicts can result in commands being hidden or replaced.
A command is hidden when it is not the command that runs when you type the command name, but you can run it by using another method, such as by qualifying the command name with the name of the module or snap-in in which it originated.
A command is replaced when you cannot run it because it has been overwritten by a command with the same name. Even when you remove the module that caused the conflict, you cannot run a replaced command unless you restart the session.
Import-Module might add commands that hide and replace commands in the
current session. Also, commands in your session can hide commands that
the module added.
To detect name conflicts, use the All parameter of the
cmdlet. Beginning in PowerShell 3.0,
Get-Command gets only that commands
that run when you type the command name. The All parameter gets all
commands with the specific name in the session.
To prevent name conflicts, use the NoClobber or Prefix parameters of
Import-Module cmdlet. The Prefix parameter adds a prefix to the
names of imported commands so that they are unique in the session. The
NoClobber parameter does not import any commands that would hide or
replace existing commands in the session.
You can also use the Alias, Cmdlet, Function, and Variable
Import-Module to select only the commands that you want to
import, and you can exclude commands that cause name conflicts in your
Module authors can prevent name conflicts by using the DefaultCommandPrefix property of the module manifest to add a default prefix to all command names. The value of the Prefix parameter takes precedence over the value of DefaultCommandPrefix.
Even if a command is hidden, you can run it by qualifying the command name with the name of the module or snap-in in which it originated.
The PowerShell command precedence rules determine which command runs when the session includes commands with the same name.
For example, when a session includes a function and a cmdlet with the same name, PowerShell runs the function by default. When the session includes commands of the same type with the same name, such as two cmdlets with the same name, by default, it runs the most recently added command.
For more information, including an explanation of the precedence rules and instructions for running hidden commands, see about_Command_Precedence.
Modules and Snap-ins
You can add commands to your session from modules and snap-ins. Modules can add all types of commands, including cmdlets, providers, and functions, and items, such as variables, aliases, and PowerShell drives. Snap-ins can add only cmdlets and providers.
Before removing a module or snap-in from your session, use the following commands to determine which commands will be removed.
To find the source of a cmdlet in your session, use the following command format:
Get-Command <cmdlet-name> | Format-List -Property verb,noun,pssnapin,module
For example, to find the source of the
Get-Date cmdlet, type:
Get-Command Get-Date | Format-List -Property verb,noun,module
Module-related Warnings and Errors
The commands that a module exports should follow the PowerShell command naming
rules. If the module that you import exports cmdlets or functions that have
unapproved verbs in their names, the
Import-Module cmdlet displays the
following warning message.
WARNING: Some imported command names include unapproved verbs which might make
them less discoverable. Use the Verbose parameter for more detail or type
Get-Verb to see the list of approved verbs.
This message is only a warning. The complete module is still imported, including the non-conforming commands. Although the message is displayed to module users, the naming problem should be fixed by the module author.
To suppress the warning message, use the DisableNameChecking parameter of
Built-in Modules and Snap-ins
In PowerShell 2.0 and in older-style host programs in PowerShell 3.0 and later, the core commands that are installed with PowerShell are packaged in snap-ins that are added automatically to every PowerShell session.
Beginning in PowerShell 3.0, for host programs that implement the
InitialSessionState.CreateDefault2 initial session state API the
Microsoft.PowerShell.Core snap-in is added to every session by default.
Modules are loaded automatically on first-use.
NOTE: Remote sessions, including sessions that are started by using the
New-PSSession cmdlet, are older-style sessions in which the built-in
commands are packaged in snap-ins.
The following modules (or snap-ins) are installed with PowerShell.
Envoyer des commentaires à propos de :
Chargement du commentaire...