Capture d’une image

Vous pouvez utiliser une image bitmap pour capturer une image, et vous pouvez stocker l’image capturée en mémoire, l’afficher à un autre emplacement dans la fenêtre de votre application ou l’afficher dans une autre fenêtre.

Dans certains cas, vous souhaiterez peut-être que votre application capture des images et les stocke uniquement temporairement. Par exemple, lorsque vous mettez à l’échelle ou effectuez un zoom sur une image créée dans une application de dessin, l’application doit enregistrer temporairement l’affichage normal de l’image et afficher la vue zoomée. Plus tard, lorsque l’utilisateur sélectionne l’affichage normal, l’application doit remplacer l’image zoomée par une copie de l’affichage normal qu’elle a enregistré temporairement.

Pour stocker temporairement une image, votre application doit appeler CreateCompatibleDC pour créer un contrôleur de périphérique compatible avec le contrôleur de périphérique de la fenêtre active. Après avoir créé un contrôleur de périphérique compatible, vous créez un bitmap avec les dimensions appropriées en appelant la fonction CreateCompatibleBitmap , puis vous la sélectionnez dans ce contexte de périphérique en appelant la fonction SelectObject .

Une fois le contexte de périphérique compatible créé et le bitmap approprié sélectionné, vous pouvez capturer l’image. La fonction BitBlt capture les images. Cette fonction effectue un transfert de blocs binaires, c’est-à-dire qu’elle copie les données d’une image bitmap source dans une bitmap de destination. Toutefois, les deux arguments de cette fonction ne sont pas des descripteurs bitmap. Au lieu de cela, BitBlt reçoit des handles qui identifient deux contextes de périphérique et copie les données bitmap à partir d’une image bitmap sélectionnée dans le DC source dans une image bitmap sélectionnée dans le DC cible. Dans ce cas, le contrôleur de périphérique cible est le contrôleur de périphérique compatible. par conséquent, lorsque BitBlt termine le transfert, l’image a été stockée en mémoire. Pour réafficher l’image, appelez BitBlt une deuxième fois, en spécifiant le DC compatible en tant que contrôleur de périphérique source et un contrôleur de périphérique de fenêtre (ou d’imprimante) comme contrôleur de périphérique cible.

Exemple de code

Cette section contient un exemple de code qui capture une image de l’intégralité du bureau, la met à l’échelle jusqu’à la taille de fenêtre actuelle, puis l’enregistre dans un fichier (et l’affiche dans la zone cliente).

pour tester l’exemple de code, commencez par créer un nouveau projet dans Visual Studio en fonction du modèle de projet d' Application de bureau Windows . Il est important de nommer le nouveau projet GDI_CapturingAnImage afin que le code ci-dessous soit compilé (par exemple, il comprend GDI_CapturingAnImage.h , qui existera dans votre nouveau projet si vous le nommez comme suggéré).

Ouvrez le GDI_CapturingAnImage.cpp fichier de code source dans votre nouveau projet et remplacez son contenu par la liste ci-dessous. Procédez ensuite à la génération et à l’exécution. Chaque fois que vous redimensionnez la fenêtre, vous verrez la capture d’écran capturée affichée dans la zone cliente.

// GDI_CapturingAnImage.cpp : Defines the entry point for the application.
//

#include "framework.h"
#include "GDI_CapturingAnImage.h"

#define MAX_LOADSTRING 100

// Global Variables:
HINSTANCE hInst;                                // current instance
WCHAR szTitle[MAX_LOADSTRING];                  // The title bar text
WCHAR szWindowClass[MAX_LOADSTRING];            // the main window class name

// Forward declarations of functions included in this code module:
ATOM                MyRegisterClass(HINSTANCE hInstance);
BOOL                InitInstance(HINSTANCE, int);
LRESULT CALLBACK    WndProc(HWND, UINT, WPARAM, LPARAM);
INT_PTR CALLBACK    About(HWND, UINT, WPARAM, LPARAM);

int APIENTRY wWinMain(_In_ HINSTANCE hInstance,
    _In_opt_ HINSTANCE hPrevInstance,
    _In_ LPWSTR    lpCmdLine,
    _In_ int       nCmdShow)
{
    UNREFERENCED_PARAMETER(hPrevInstance);
    UNREFERENCED_PARAMETER(lpCmdLine);

    // TODO: Place code here.

    // Initialize global strings
    LoadStringW(hInstance, IDS_APP_TITLE, szTitle, MAX_LOADSTRING);
    LoadStringW(hInstance, IDC_GDICAPTURINGANIMAGE, szWindowClass, MAX_LOADSTRING);
    MyRegisterClass(hInstance);

    // Perform application initialization:
    if (!InitInstance(hInstance, nCmdShow))
    {
        return FALSE;
    }

    HACCEL hAccelTable = LoadAccelerators(hInstance, MAKEINTRESOURCE(IDC_GDICAPTURINGANIMAGE));

    MSG msg;

    // Main message loop:
    while (GetMessage(&msg, nullptr, 0, 0))
    {
        if (!TranslateAccelerator(msg.hwnd, hAccelTable, &msg))
        {
            TranslateMessage(&msg);
            DispatchMessage(&msg);
        }
    }

    return (int)msg.wParam;
}

//
//  FUNCTION: MyRegisterClass()
//
//  PURPOSE: Registers the window class.
//
ATOM MyRegisterClass(HINSTANCE hInstance)
{
    WNDCLASSEXW wcex;

    wcex.cbSize = sizeof(WNDCLASSEX);

    wcex.style = CS_HREDRAW | CS_VREDRAW;
    wcex.lpfnWndProc = WndProc;
    wcex.cbClsExtra = 0;
    wcex.cbWndExtra = 0;
    wcex.hInstance = hInstance;
    wcex.hIcon = LoadIcon(hInstance, MAKEINTRESOURCE(IDI_GDICAPTURINGANIMAGE));
    wcex.hCursor = LoadCursor(nullptr, IDC_ARROW);
    wcex.hbrBackground = (HBRUSH)(COLOR_WINDOW + 1);
    wcex.lpszMenuName = MAKEINTRESOURCEW(IDC_GDICAPTURINGANIMAGE);
    wcex.lpszClassName = szWindowClass;
    wcex.hIconSm = LoadIcon(wcex.hInstance, MAKEINTRESOURCE(IDI_SMALL));

    return RegisterClassExW(&wcex);
}

//
//   FUNCTION: InitInstance(HINSTANCE, int)
//
//   PURPOSE: Saves instance handle and creates main window
//
//   COMMENTS:
//
//        In this function, we save the instance handle in a global variable and
//        create and display the main program window.
//
BOOL InitInstance(HINSTANCE hInstance, int nCmdShow)
{
    hInst = hInstance; // Store instance handle in our global variable

    HWND hWnd = CreateWindowW(szWindowClass, szTitle, WS_OVERLAPPEDWINDOW,
        CW_USEDEFAULT, 0, CW_USEDEFAULT, 0, nullptr, nullptr, hInstance, nullptr);

    if (!hWnd)
    {
        return FALSE;
    }

    ShowWindow(hWnd, nCmdShow);
    UpdateWindow(hWnd);

    return TRUE;
}

// THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF
// ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO
// THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A
// PARTICULAR PURPOSE.
//
// Copyright (c) Microsoft Corporation. All rights reserved

//
//   FUNCTION: CaptureAnImage(HWND hWnd)
//
//   PURPOSE: Captures a screenshot into a window ,and then saves it in a .bmp file.
//
//   COMMENTS: 
//
//      Note: This function attempts to create a file called captureqwsx.bmp 
//        

int CaptureAnImage(HWND hWnd)
{
    HDC hdcScreen;
    HDC hdcWindow;
    HDC hdcMemDC = NULL;
    HBITMAP hbmScreen = NULL;
    BITMAP bmpScreen;
    DWORD dwBytesWritten = 0;
    DWORD dwSizeofDIB = 0;
    HANDLE hFile = NULL;
    char* lpbitmap = NULL;
    HANDLE hDIB = NULL;
    DWORD dwBmpSize = 0;

    // Retrieve the handle to a display device context for the client 
    // area of the window. 
    hdcScreen = GetDC(NULL);
    hdcWindow = GetDC(hWnd);

    // Create a compatible DC, which is used in a BitBlt from the window DC.
    hdcMemDC = CreateCompatibleDC(hdcWindow);

    if (!hdcMemDC)
    {
        MessageBox(hWnd, L"CreateCompatibleDC has failed", L"Failed", MB_OK);
        goto done;
    }

    // Get the client area for size calculation.
    RECT rcClient;
    GetClientRect(hWnd, &rcClient);

    // This is the best stretch mode.
    SetStretchBltMode(hdcWindow, HALFTONE);

    // The source DC is the entire screen, and the destination DC is the current window (HWND).
    if (!StretchBlt(hdcWindow,
        0, 0,
        rcClient.right, rcClient.bottom,
        hdcScreen,
        0, 0,
        GetSystemMetrics(SM_CXSCREEN),
        GetSystemMetrics(SM_CYSCREEN),
        SRCCOPY))
    {
        MessageBox(hWnd, L"StretchBlt has failed", L"Failed", MB_OK);
        goto done;
    }

    // Create a compatible bitmap from the Window DC.
    hbmScreen = CreateCompatibleBitmap(hdcWindow, rcClient.right - rcClient.left, rcClient.bottom - rcClient.top);

    if (!hbmScreen)
    {
        MessageBox(hWnd, L"CreateCompatibleBitmap Failed", L"Failed", MB_OK);
        goto done;
    }

    // Select the compatible bitmap into the compatible memory DC.
    SelectObject(hdcMemDC, hbmScreen);

    // Bit block transfer into our compatible memory DC.
    if (!BitBlt(hdcMemDC,
        0, 0,
        rcClient.right - rcClient.left, rcClient.bottom - rcClient.top,
        hdcWindow,
        0, 0,
        SRCCOPY))
    {
        MessageBox(hWnd, L"BitBlt has failed", L"Failed", MB_OK);
        goto done;
    }

    // Get the BITMAP from the HBITMAP.
    GetObject(hbmScreen, sizeof(BITMAP), &bmpScreen);

    BITMAPFILEHEADER   bmfHeader;
    BITMAPINFOHEADER   bi;

    bi.biSize = sizeof(BITMAPINFOHEADER);
    bi.biWidth = bmpScreen.bmWidth;
    bi.biHeight = bmpScreen.bmHeight;
    bi.biPlanes = 1;
    bi.biBitCount = 32;
    bi.biCompression = BI_RGB;
    bi.biSizeImage = 0;
    bi.biXPelsPerMeter = 0;
    bi.biYPelsPerMeter = 0;
    bi.biClrUsed = 0;
    bi.biClrImportant = 0;

    dwBmpSize = ((bmpScreen.bmWidth * bi.biBitCount + 31) / 32) * 4 * bmpScreen.bmHeight;

    // Starting with 32-bit Windows, GlobalAlloc and LocalAlloc are implemented as wrapper functions that 
    // call HeapAlloc using a handle to the process's default heap. Therefore, GlobalAlloc and LocalAlloc 
    // have greater overhead than HeapAlloc.
    hDIB = GlobalAlloc(GHND, dwBmpSize);
    lpbitmap = (char*)GlobalLock(hDIB);

    // Gets the "bits" from the bitmap, and copies them into a buffer 
    // that's pointed to by lpbitmap.
    GetDIBits(hdcWindow, hbmScreen, 0,
        (UINT)bmpScreen.bmHeight,
        lpbitmap,
        (BITMAPINFO*)&bi, DIB_RGB_COLORS);

    // A file is created, this is where we will save the screen capture.
    hFile = CreateFile(L"captureqwsx.bmp",
        GENERIC_WRITE,
        0,
        NULL,
        CREATE_ALWAYS,
        FILE_ATTRIBUTE_NORMAL, NULL);

    // Add the size of the headers to the size of the bitmap to get the total file size.
    dwSizeofDIB = dwBmpSize + sizeof(BITMAPFILEHEADER) + sizeof(BITMAPINFOHEADER);

    // Offset to where the actual bitmap bits start.
    bmfHeader.bfOffBits = (DWORD)sizeof(BITMAPFILEHEADER) + (DWORD)sizeof(BITMAPINFOHEADER);

    // Size of the file.
    bmfHeader.bfSize = dwSizeofDIB;

    // bfType must always be BM for Bitmaps.
    bmfHeader.bfType = 0x4D42; // BM.

    WriteFile(hFile, (LPSTR)&bmfHeader, sizeof(BITMAPFILEHEADER), &dwBytesWritten, NULL);
    WriteFile(hFile, (LPSTR)&bi, sizeof(BITMAPINFOHEADER), &dwBytesWritten, NULL);
    WriteFile(hFile, (LPSTR)lpbitmap, dwBmpSize, &dwBytesWritten, NULL);

    // Unlock and Free the DIB from the heap.
    GlobalUnlock(hDIB);
    GlobalFree(hDIB);

    // Close the handle for the file that was created.
    CloseHandle(hFile);

    // Clean up.
done:
    DeleteObject(hbmScreen);
    DeleteObject(hdcMemDC);
    ReleaseDC(NULL, hdcScreen);
    ReleaseDC(hWnd, hdcWindow);

    return 0;
}

//
//  FUNCTION: WndProc(HWND, UINT, WPARAM, LPARAM)
//
//  PURPOSE: Processes messages for the main window.
//
//  WM_COMMAND  - process the application menu
//  WM_PAINT    - Paint the main window
//  WM_DESTROY  - post a quit message and return
//
//
LRESULT CALLBACK WndProc(HWND hWnd, UINT message, WPARAM wParam, LPARAM lParam)
{
    switch (message)
    {
    case WM_COMMAND:
    {
        int wmId = LOWORD(wParam);
        // Parse the menu selections:
        switch (wmId)
        {
        case IDM_ABOUT:
            DialogBox(hInst, MAKEINTRESOURCE(IDD_ABOUTBOX), hWnd, About);
            break;
        case IDM_EXIT:
            DestroyWindow(hWnd);
            break;
        default:
            return DefWindowProc(hWnd, message, wParam, lParam);
        }
    }
    break;
    case WM_PAINT:
    {
        PAINTSTRUCT ps;
        HDC hdc = BeginPaint(hWnd, &ps);
        CaptureAnImage(hWnd);
        EndPaint(hWnd, &ps);
    }
    break;
    case WM_DESTROY:
        PostQuitMessage(0);
        break;
    default:
        return DefWindowProc(hWnd, message, wParam, lParam);
    }
    return 0;
}

// Message handler for about box.
INT_PTR CALLBACK About(HWND hDlg, UINT message, WPARAM wParam, LPARAM lParam)
{
    UNREFERENCED_PARAMETER(lParam);
    switch (message)
    {
    case WM_INITDIALOG:
        return (INT_PTR)TRUE;

    case WM_COMMAND:
        if (LOWORD(wParam) == IDOK || LOWORD(wParam) == IDCANCEL)
        {
            EndDialog(hDlg, LOWORD(wParam));
            return (INT_PTR)TRUE;
        }
        break;
    }
    return (INT_PTR)FALSE;
}