संपादित करें

Azure IoT Hub as an Event Grid source

  • आलेख

This article provides the properties and schema for Azure IoT Hub events. For an introduction to event schemas, see Azure Event Grid event schema.

Available event types

Azure IoT Hub emits the following event types:

Event type Description
Microsoft.Devices.DeviceCreated Published when a device is registered to an IoT hub.
Microsoft.Devices.DeviceDeleted Published when a device is deleted from an IoT hub.
Microsoft.Devices.DeviceConnected Published when a device is connected to an IoT hub.
Microsoft.Devices.DeviceDisconnected Published when a device is disconnected from an IoT hub.
Microsoft.Devices.DeviceTelemetry Published when a telemetry message is sent to an IoT hub.

Example event

The schemas for DeviceConnected and DeviceDisconnected events have the same structure. This sample event shows the schema of an event raised when a device is connected to an IoT hub:

[{
  "id": "f6bbf8f4-d365-520d-a878-17bf7238abd8", 
  "source": "/SUBSCRIPTIONS/<subscription ID>/RESOURCEGROUPS/<resource group name>/PROVIDERS/MICROSOFT.DEVICES/IOTHUBS/<hub name>", 
  "subject": "devices/LogicAppTestDevice", 
  "type": "Microsoft.Devices.DeviceConnected", 
  "time": "2018-06-02T19:17:44.4383997Z", 
  "data": {
    "deviceConnectionStateEventInfo": {
      "sequenceNumber":
        "000000000000000001D4132452F67CE200000002000000000000000000000001"
    },
    "hubName": "egtesthub1",
    "deviceId": "LogicAppTestDevice",
    "moduleId" : "DeviceModuleID"
  }, 
  "specversion": "1.0"
}]

The DeviceTelemetry event is raised when a telemetry event is sent to an IoT Hub. A sample schema for this event is shown below.

[{
  "id": "9af86784-8d40-fe2g-8b2a-bab65e106785",
  "source": "/SUBSCRIPTIONS/<subscription ID>/RESOURCEGROUPS/<resource group name>/PROVIDERS/MICROSOFT.DEVICES/IOTHUBS/<hub name>", 
  "subject": "devices/LogicAppTestDevice", 
  "type": "Microsoft.Devices.DeviceTelemetry",
  "time": "2019-01-07T20:58:30.48Z",
  "data": {        
      "body": {            
          "Weather": {                
              "Temperature": 900            
          },
          "Location": "USA"        
      },
        "properties": {            
          "Status": "Active"        
        },
        "systemProperties": {            
            "iothub-content-type": "application/json",
            "iothub-content-encoding": "utf-8",
            "iothub-connection-device-id": "d1",
            "iothub-connection-auth-method": "{\"scope\":\"device\",\"type\":\"sas\",\"issuer\":\"iothub\",\"acceptingIpFilterRule\":null}",
            "iothub-connection-auth-generation-id": "123455432199234570",
            "iothub-enqueuedtime": "2019-01-07T20:58:30.48Z",
            "iothub-message-source": "Telemetry"        
        }    
    },
  "specversion": "1.0"
}]

The schemas for DeviceCreated and DeviceDeleted events have the same structure. This sample event shows the schema of an event raised when a device is registered to an IoT hub:

[{
  "id": "56afc886-767b-d359-d59e-0da7877166b2",
  "source": "/SUBSCRIPTIONS/<subscription ID>/RESOURCEGROUPS/<resource group name>/PROVIDERS/MICROSOFT.DEVICES/IOTHUBS/<hub name>",
  "subject": "devices/LogicAppTestDevice",
  "type": "Microsoft.Devices.DeviceCreated",
  "time": "2018-01-02T19:17:44.4383997Z",
  "data": {
    "twin": {
      "deviceId": "LogicAppTestDevice",
      "etag": "AAAAAAAAAAE=",
      "deviceEtag": "null",
      "status": "enabled",
      "statusUpdateTime": "0001-01-01T00:00:00",
      "connectionState": "Disconnected",
      "lastActivityTime": "0001-01-01T00:00:00",
      "cloudToDeviceMessageCount": 0,
      "authenticationType": "sas",
      "x509Thumbprint": {
        "primaryThumbprint": null,
        "secondaryThumbprint": null
      },
      "version": 2,
      "properties": {
        "desired": {
          "$metadata": {
            "$lastUpdated": "2018-01-02T19:17:44.4383997Z"
          },
          "$version": 1
        },
        "reported": {
          "$metadata": {
            "$lastUpdated": "2018-01-02T19:17:44.4383997Z"
          },
          "$version": 1
        }
      }
    },
    "hubName": "egtesthub1",
    "deviceId": "LogicAppTestDevice"
  },
  "specversion": "1.0"
}]

Event properties

All events contain the same top-level data:

Property Type Description
id string Unique identifier for the event.
source string Full resource path to the event source. This field isn't writeable. Event Grid provides this value.
subject string Publisher-defined path to the event subject.
type string One of the registered event types for this event source.
time string The time the event is generated based on the provider's UTC time.
data object IoT Hub event data.
specversion string CloudEvents schema specification version.

For all IoT Hub events, the data object contains the following properties:

Property Type Description
hubName string Name of the IoT Hub where the device was created or deleted.
deviceId string The unique identifier of the device. This case-sensitive string can be up to 128 characters long, and supports ASCII 7-bit alphanumeric characters plus the following special characters: - : . + % _ # * ? ! ( ) , = @ ; $ '.

The contents of the data object are different for each event publisher.

For Device Connected and Device Disconnected IoT Hub events, the data object contains the following properties:

Property Type Description
moduleId string The unique identifier of the module. This field is output only for module devices. This case-sensitive string can be up to 128 characters long, and supports ASCII 7-bit alphanumeric characters plus the following special characters: - : . + % _ # * ? ! ( ) , = @ ; $ '.
deviceConnectionStateEventInfo object Device connection state event information
sequenceNumber string A number which helps indicate order of device connected or device disconnected events. Latest event will have a sequence number that is higher than the previous event. This number may change by more than 1, but is strictly increasing. See how to use sequence number.

For Device Telemetry IoT Hub event, the data object contains the device-to-cloud message in IoT hub message format and has the following properties:

Property Type Description
body string The content of the message from the device.
properties string Application properties are user-defined strings that can be added to the message. These fields are optional.
system properties string System properties help identify contents and source of the messages. Device telemetry message must be in a valid JSON format with the contentType set to JSON and contentEncoding set to UTF-8 in the message system properties. If this isn't set, then IoT Hub will write the messages in base 64 encoded format.

For Device Created and Device Deleted IoT Hub events, the data object contains the following properties:

Property Type Description
twin object Information about the device twin, which is the cloud representation of application device metadata.
deviceID string The unique identifier of the device twin.
etag string A validator for ensuring consistency of updates to a device twin. Each etag is guaranteed to be unique per device twin.
deviceEtag string A validator for ensuring consistency of updates to a device registry. Each deviceEtag is guaranteed to be unique per device registry.
status string Indicates whether the device twin is enabled or disabled.
statusUpdateTime string The ISO8601 timestamp of the last device twin status update.
connectionState string Indicates whether the device is connected or disconnected.
lastActivityTime string The ISO8601 timestamp of the last activity.
cloudToDeviceMessageCount integer Count of cloud to device messages sent to this device.
authenticationType string Authentication type used for this device: either SAS, SelfSigned, or CertificateAuthority.
x509Thumbprint string The thumbprint is a unique value for the x509 certificate, commonly used to find a particular certificate in a certificate store. The thumbprint is dynamically generated using the SHA1 algorithm, and doesn't physically exist in the certificate.
primaryThumbprint string Primary thumbprint for the x509 certificate.
secondaryThumbprint string Secondary thumbprint for the x509 certificate.
version integer An integer that is incremented by one each time the device twin is updated.
desired object A portion of the properties that can be written only by the application back-end, and read by the device.
reported object A portion of the properties that can be written only by the device, and read by the application back-end.
lastUpdated string The ISO8601 timestamp of the last device twin property update.

Tutorials and how-tos

Title Description
Send email notifications about Azure IoT Hub events using Logic Apps A logic app sends a notification email every time a device is added to your IoT Hub.
React to IoT Hub events by using Event Grid to trigger actions Overview of integrating IoT Hub with Event Grid.
Order device connected and device disconnected events Shows how to order device connection state events.

Next steps