Convert.ToChar Metodo
Definizione
Converte un valore specificato in un carattere Unicode.Converts a specified value to a Unicode character.
Overload
ToChar(Object) |
Converte il valore dell'oggetto specificato in un carattere Unicode.Converts the value of the specified object to a Unicode character. |
ToChar(Object, IFormatProvider) |
Converte il valore dell'oggetto specificato nel relativo carattere Unicode equivalente mediante le informazioni di formattazione specifiche delle impostazioni cultura indicate.Converts the value of the specified object to its equivalent Unicode character, using the specified culture-specific formatting information. |
ToChar(UInt64) |
Converte il valore dell'intero senza segno a 64 bit specificato nel carattere Unicode equivalente.Converts the value of the specified 64-bit unsigned integer to its equivalent Unicode character. |
ToChar(UInt32) |
Converte il valore dell'intero senza segno a 32 bit specificato nel carattere Unicode equivalente.Converts the value of the specified 32-bit unsigned integer to its equivalent Unicode character. |
ToChar(UInt16) |
Converte il valore dell'intero senza segno a 16 bit specificato nel carattere Unicode equivalente.Converts the value of the specified 16-bit unsigned integer to its equivalent Unicode character. |
ToChar(String) |
Converte il primo carattere di una stringa specificata in un carattere Unicode.Converts the first character of a specified string to a Unicode character. |
ToChar(Single) |
La chiamata di questo metodo genera sempre un'eccezione InvalidCastException.Calling this method always throws InvalidCastException. |
ToChar(SByte) |
Converte il valore dell'intero con segno a 8 bit specificato nel carattere Unicode equivalente.Converts the value of the specified 8-bit signed integer to its equivalent Unicode character. |
ToChar(String, IFormatProvider) |
Converte il primo carattere di una stringa specificata in un carattere Unicode mediante le informazioni di formattazione specifiche delle impostazioni cultura indicate.Converts the first character of a specified string to a Unicode character, using specified culture-specific formatting information. |
ToChar(Int64) |
Converte il valore dell'intero con segno a 64 bit specificato nel carattere Unicode equivalente.Converts the value of the specified 64-bit signed integer to its equivalent Unicode character. |
ToChar(Int16) |
Converte il valore dell'intero con segno a 16 bit specificato nel carattere Unicode equivalente.Converts the value of the specified 16-bit signed integer to its equivalent Unicode character. |
ToChar(Double) |
La chiamata di questo metodo genera sempre un'eccezione InvalidCastException.Calling this method always throws InvalidCastException. |
ToChar(Decimal) |
La chiamata di questo metodo genera sempre un'eccezione InvalidCastException.Calling this method always throws InvalidCastException. |
ToChar(DateTime) |
La chiamata di questo metodo genera sempre un'eccezione InvalidCastException.Calling this method always throws InvalidCastException. |
ToChar(Char) |
Restituisce il valore del carattere Unicode specificato; non viene eseguita alcuna conversione effettiva.Returns the specified Unicode character value; no actual conversion is performed. |
ToChar(Byte) |
Converte il valore dell'intero senza segno a 8 bit specificato nel carattere Unicode equivalente.Converts the value of the specified 8-bit unsigned integer to its equivalent Unicode character. |
ToChar(Boolean) |
La chiamata di questo metodo genera sempre un'eccezione InvalidCastException.Calling this method always throws InvalidCastException. |
ToChar(Int32) |
Converte il valore dell'intero con segno a 32 bit specificato nel carattere Unicode equivalente.Converts the value of the specified 32-bit signed integer to its equivalent Unicode character. |
ToChar(Object)
Converte il valore dell'oggetto specificato in un carattere Unicode.Converts the value of the specified object to a Unicode character.
public:
static char ToChar(System::Object ^ value);
public static char ToChar (object value);
public static char ToChar (object? value);
static member ToChar : obj -> char
Public Shared Function ToChar (value As Object) As Char
Parametri
- value
- Object
Oggetto che implementa l'interfaccia IConvertible.An object that implements the IConvertible interface.
Restituisce
Carattere Unicode equivalente a value oppure MinValue se value
è null
.A Unicode character that is equivalent to value, or MinValue if value
is null
.
Eccezioni
value
è una stringa Null.value
is a null string.
value
non implementa l'interfaccia IConvertible.value
does not implement the IConvertible interface.
-oppure--or-
La conversione di value
in Char non è supportata.The conversion of value
to a Char is not supported.
value
è minore di MinValue o maggiore di MaxValue.value
is less than MinValue or greater than MaxValue.
Esempio
Nell'esempio seguente viene effettuato un tentativo di convertire ogni elemento in una matrice di oggetti in un Char valore.The following example attempts to convert each element in an object array to a Char value.
object[] values = { 'r', "s", "word", (byte) 83, 77, 109324, 335812911,
new DateTime(2009, 3, 10), (uint) 1934,
(sbyte) -17, 169.34, 175.6m, null };
char result;
foreach (object value in values)
{
try {
result = Convert.ToChar(value);
Console.WriteLine("The {0} value {1} converts to {2}.",
value.GetType().Name, value, result);
}
catch (FormatException e) {
Console.WriteLine(e.Message);
}
catch (InvalidCastException) {
Console.WriteLine("Conversion of the {0} value {1} to a Char is not supported.",
value.GetType().Name, value);
}
catch (OverflowException) {
Console.WriteLine("The {0} value {1} is outside the range of the Char data type.",
value.GetType().Name, value);
}
catch (NullReferenceException) {
Console.WriteLine("Cannot convert a null reference to a Char.");
}
}
// The example displays the following output:
// The Char value r converts to r.
// The String value s converts to s.
// String must be exactly one character long.
// The Byte value 83 converts to S.
// The Int32 value 77 converts to M.
// The Int32 value 109324 is outside the range of the Char data type.
// The Int32 value 335812911 is outside the range of the Char data type.
// Conversion of the DateTime value 3/10/2009 12:00:00 AM to a Char is not supported.
// The UInt32 value 1934 converts to ?.
// The SByte value -17 is outside the range of the Char data type.
// Conversion of the Double value 169.34 to a Char is not supported.
// Conversion of the Decimal value 175.6 to a Char is not supported.
// Cannot convert a null reference to a Char.
Dim values() As Object = { "r"c, "s", "word", CByte(83), 77, 109324, _
335812911, #3/10/2009#, CUInt(1934), _
CSByte(-17), 169.34, 175.6d, Nothing }
Dim result As Char
For Each value As Object In values
Try
result = Convert.ToChar(value)
Console.WriteLine("The {0} value {1} converts to {2}.", _
value.GetType().Name, value, result)
Catch e As FormatException
Console.WriteLine(e.Message)
Catch e As InvalidCastException
Console.WriteLine("Conversion of the {0} value {1} to a Char is not supported.", _
value.GetType().Name, value)
Catch e As OverflowException
Console.WriteLine("The {0} value {1} is outside the range of the Char data type.", _
value.GetType().Name, value)
Catch e As NullReferenceException
Console.WriteLine("Cannot convert a null reference to a Char.")
End Try
Next
' The example displays the following output:
' The Char value r converts to r.
' The String value s converts to s.
' String must be exactly one character long.
' The Byte value 83 converts to S.
' The Int32 value 77 converts to M.
' The Int32 value 109324 is outside the range of the Char data type.
' The Int32 value 335812911 is outside the range of the Char data type.
' Conversion of the DateTime value 3/10/2009 12:00:00 AM to a Char is not supported.
' The UInt32 value 1934 converts to ?.
' The SByte value -17 is outside the range of the Char data type.
' Conversion of the Double value 169.34 to a Char is not supported.
' Conversion of the Decimal value 175.6 to a Char is not supported.
' Cannot convert a null reference to a Char.
Commenti
Se value
non è null
, questo metodo esegue il wrapping di una chiamata all' IConvertible.ToChar implementazione del tipo sottostante di value
.If value
is not null
, this method wraps a call to the IConvertible.ToChar implementation of the underlying type of value
.
Si applica a
ToChar(Object, IFormatProvider)
Converte il valore dell'oggetto specificato nel relativo carattere Unicode equivalente mediante le informazioni di formattazione specifiche delle impostazioni cultura indicate.Converts the value of the specified object to its equivalent Unicode character, using the specified culture-specific formatting information.
public:
static char ToChar(System::Object ^ value, IFormatProvider ^ provider);
public static char ToChar (object value, IFormatProvider provider);
public static char ToChar (object? value, IFormatProvider? provider);
static member ToChar : obj * IFormatProvider -> char
Public Shared Function ToChar (value As Object, provider As IFormatProvider) As Char
Parametri
- value
- Object
Oggetto che implementa l'interfaccia IConvertible.An object that implements the IConvertible interface.
- provider
- IFormatProvider
Oggetto che fornisce informazioni di formattazione specifiche delle impostazioni cultura.An object that supplies culture-specific formatting information.
Restituisce
Carattere Unicode equivalente a value
oppure MinValue se value
è null
.A Unicode character that is equivalent to value
, or MinValue if value
is null
.
Eccezioni
value
è una stringa Null.value
is a null string.
value
non implementa l'interfaccia IConvertible.value
does not implement the IConvertible interface.
-oppure--or-
La conversione di value
in Char non è supportata.The conversion of value
to a Char is not supported.
value
è minore di MinValue o maggiore di MaxValue.value
is less than MinValue or greater than MaxValue.
Esempio
Nell'esempio seguente viene definita una classe che implementa IConvertible e una classe che implementa IFormatProvider .The following example defines a class that implements IConvertible and a class that implements IFormatProvider. Gli oggetti della classe che implementa IConvertible contengono una matrice di Double valori.Objects of the class that implements IConvertible hold an array of Double values. Un oggetto di ogni classe viene passato al ToChar
metodo.An object of each class is passed to the ToChar
method. Questo metodo restituisce un carattere il cui valore Unicode è la media della matrice di Double valori, usando l'oggetto che implementa IFormatProvider per determinare il modo in cui calcolare la media.This method returns a character whose Unicode value is the average of the array of Double values, using the object that implements IFormatProvider to determine how to calculate the average.
using namespace System;
using namespace System::Collections;
// Define the types of averaging available in the class
// implementing IConvertible.
public enum class AverageType : short
{
None = 0,
GeometricMean = 1,
ArithmeticMean = 2,
Median = 3
};
// Pass an instance of this class to methods that require an
// IFormatProvider. The class instance determines the type of
// average to calculate.
ref class AverageInfo: public IFormatProvider
{
protected:
AverageType AvgType;
public:
// Specify the type of averaging in the constructor.
AverageInfo( AverageType avgType )
{
this->AvgType = avgType;
}
// This method returns a reference to the containing object
// if an object of AverageInfo type is requested.
virtual Object^ GetFormat( Type^ argType )
{
if ( argType == AverageInfo::typeid)
return this;
else
return (Object^)0;
}
property AverageType TypeOfAverage
{
// Use this property to set or get the type of averaging.
AverageType get()
{
return this->AvgType;
}
void set( AverageType value )
{
this->AvgType = value;
}
}
};
// This class encapsulates an array of double values and implements
// the IConvertible interface. Most of the IConvertible methods
// return an average of the array elements in one of three types:
// arithmetic mean, geometric mean, or median.
ref class DataSet: public IConvertible
{
private:
static Object^ null = nullptr;
protected:
ArrayList^ data;
AverageInfo^ defaultProvider;
// This method unboxes a boxed double.
double UnBoxDouble( Object^ obj )
{
return *static_cast<double^>(obj);
}
public:
// Construct the object and add an initial list of values.
// Create a default format provider.
DataSet( ... array<Double>^values )
{
data = gcnew ArrayList( (Array^)values );
defaultProvider = gcnew AverageInfo( AverageType::ArithmeticMean );
}
// Add additional values with this method.
int Add( double value )
{
data->Add( value );
return data->Count;
}
property double Item[ int ]
{
// Get, set, and add values with this indexer property.
double get( int index )
{
if ( index >= 0 && index < data->Count )
return UnBoxDouble( data[ index ] );
else
throw gcnew InvalidOperationException( "[DataSet.get] Index out of range." );
}
void set( int index, double value )
{
if ( index >= 0 && index < data->Count )
data[ index ] = value;
else
if ( index == data->Count )
data->Add( value );
else
throw gcnew InvalidOperationException( "[DataSet.set] Index out of range." );
}
}
property int Count
{
// This property returns the number of elements in the object.
int get()
{
return data->Count;
}
}
protected:
// This method calculates the average of the object's elements.
double Average( AverageType avgType )
{
double SumProd;
if ( data->Count == 0 )
return 0.0;
switch ( avgType )
{
case AverageType::GeometricMean:
SumProd = 1.0;
for ( int Index = 0; Index < data->Count; Index++ )
SumProd *= UnBoxDouble( data[ Index ] );
// This calculation will not fail with negative
// elements.
return Math::Sign( SumProd ) * Math::Pow( Math::Abs( SumProd ), 1.0 / data->Count );
case AverageType::ArithmeticMean:
SumProd = 0.0;
for ( int Index = 0; Index < data->Count; Index++ )
SumProd += UnBoxDouble( data[ Index ] );
return SumProd / data->Count;
case AverageType::Median:
if ( data->Count % 2 == 0 )
return (UnBoxDouble( data[ data->Count / 2 ] ) + UnBoxDouble( data[ data->Count / 2 - 1 ] )) / 2.0;
else
return UnBoxDouble( data[ data->Count / 2 ] );
default:
return 0.0;
}
}
// Get the AverageInfo object from the caller's format provider,
// or use the local default.
AverageInfo^ GetAverageInfo( IFormatProvider^ provider )
{
AverageInfo^ avgInfo = nullptr;
if ( provider != nullptr )
avgInfo = static_cast<AverageInfo^>(provider->GetFormat( AverageInfo::typeid ));
if ( avgInfo == nullptr )
return defaultProvider;
else
return avgInfo;
}
// Calculate the average and limit the range.
double CalcNLimitAverage( double min, double max, IFormatProvider^ provider )
{
// Get the format provider and calculate the average.
AverageInfo^ avgInfo = GetAverageInfo( provider );
double avg = Average( avgInfo->TypeOfAverage );
// Limit the range, based on the minimum and maximum values
// for the type.
return avg > max ? max : avg < min ? min : avg;
}
public:
// The following elements are required by IConvertible.
// None of these conversion functions throw exceptions. When
// the data is out of range for the type, the appropriate
// MinValue or MaxValue is used.
virtual TypeCode GetTypeCode()
{
return TypeCode::Object;
}
virtual bool ToBoolean( IFormatProvider^ provider )
{
// ToBoolean is false if the dataset is empty.
if ( data->Count <= 0 )
return false;
// For median averaging, ToBoolean is true if any
// non-discarded elements are nonzero.
else
// For median averaging, ToBoolean is true if any
// non-discarded elements are nonzero.
if ( AverageType::Median == GetAverageInfo( provider )->TypeOfAverage )
{
if ( data->Count % 2 == 0 )
return (UnBoxDouble( data[ data->Count / 2 ] ) != 0.0 || UnBoxDouble( data[ data->Count / 2 - 1 ] ) != 0.0);
else
return UnBoxDouble( data[ data->Count / 2 ] ) != 0.0;
}
// For arithmetic or geometric mean averaging, ToBoolean is
// true if any element of the dataset is nonzero.
else
{
for ( int Index = 0; Index < data->Count; Index++ )
if ( UnBoxDouble( data[ Index ] ) != 0.0 )
return true;
return false;
}
}
virtual Byte ToByte( IFormatProvider^ provider )
{
return Convert::ToByte( CalcNLimitAverage( Byte::MinValue, Byte::MaxValue, provider ) );
}
virtual Char ToChar( IFormatProvider^ provider )
{
return Convert::ToChar( Convert::ToUInt16( CalcNLimitAverage( Char::MinValue, Char::MaxValue, provider ) ) );
}
// Convert to DateTime by adding the calculated average as
// seconds to the current date and time. A valid DateTime is
// always returned.
virtual DateTime ToDateTime( IFormatProvider^ provider )
{
double seconds = Average( GetAverageInfo( provider )->TypeOfAverage );
try
{
return DateTime::Now.AddSeconds( seconds );
}
catch ( ArgumentOutOfRangeException^ )
{
return seconds < 0.0 ? DateTime::MinValue : DateTime::MaxValue;
}
}
virtual Decimal ToDecimal( IFormatProvider^ provider )
{
// The Double conversion rounds Decimal.MinValue and
// Decimal.MaxValue to invalid Decimal values, so the
// following limits must be used.
return Convert::ToDecimal( CalcNLimitAverage( -79228162514264330000000000000.0, 79228162514264330000000000000.0, provider ) );
}
virtual double ToDouble( IFormatProvider^ provider )
{
return Average( GetAverageInfo( provider )->TypeOfAverage );
}
virtual short ToInt16( IFormatProvider^ provider )
{
return Convert::ToInt16( CalcNLimitAverage( Int16::MinValue, Int16::MaxValue, provider ) );
}
virtual int ToInt32( IFormatProvider^ provider )
{
return Convert::ToInt32( CalcNLimitAverage( Int32::MinValue, Int32::MaxValue, provider ) );
}
virtual __int64 ToInt64( IFormatProvider^ provider )
{
// The Double conversion rounds Int64.MinValue and
// Int64.MaxValue to invalid Int64 values, so the following
// limits must be used.
return Convert::ToInt64( CalcNLimitAverage( -9223372036854775000, 9223372036854775000, provider ) );
}
virtual signed char ToSByte( IFormatProvider^ provider )
{
return Convert::ToSByte( CalcNLimitAverage( SByte::MinValue, SByte::MaxValue, provider ) );
}
virtual float ToSingle( IFormatProvider^ provider )
{
return Convert::ToSingle( CalcNLimitAverage( Single::MinValue, Single::MaxValue, provider ) );
}
virtual UInt16 ToUInt16( IFormatProvider^ provider )
{
return Convert::ToUInt16( CalcNLimitAverage( UInt16::MinValue, UInt16::MaxValue, provider ) );
}
virtual UInt32 ToUInt32( IFormatProvider^ provider )
{
return Convert::ToUInt32( CalcNLimitAverage( UInt32::MinValue, UInt32::MaxValue, provider ) );
}
virtual UInt64 ToUInt64( IFormatProvider^ provider )
{
// The Double conversion rounds UInt64.MaxValue to an invalid
// UInt64 value, so the following limit must be used.
return Convert::ToUInt64( CalcNLimitAverage( 0, 18446744073709550000.0, provider ) );
}
virtual Object^ ToType( Type^ conversionType, IFormatProvider^ provider )
{
return Convert::ChangeType( Average( GetAverageInfo( provider )->TypeOfAverage ), conversionType );
}
virtual String^ ToString( IFormatProvider^ provider )
{
AverageType avgType = GetAverageInfo( provider )->TypeOfAverage;
return String::Format( "( {0}: {1:G10} )", avgType, Average( avgType ) );
}
};
// Display a DataSet with three different format providers.
void DisplayDataSet( DataSet^ ds )
{
IFormatProvider^ null = nullptr;
String^ fmt = "{0,-12}{1,20}{2,20}{3,20}";
AverageInfo^ median = gcnew AverageInfo( AverageType::Median );
AverageInfo^ geMean = gcnew AverageInfo( AverageType::GeometricMean );
// Display the dataset elements.
if ( ds->Count > 0 )
{
Console::Write( "\nDataSet: [{0}", ds->Item[ 0 ] );
for ( int iX = 1; iX < ds->Count; iX++ )
Console::Write( ", {0}", ds->Item[ iX ] );
Console::WriteLine( "]\n" );
}
Console::WriteLine( fmt, "Convert::", "Default", "Geometric Mean", "Median" );
Console::WriteLine( fmt, "---------", "-------", "--------------", "------" );
Console::WriteLine( fmt, "ToBoolean", Convert::ToBoolean( ds, null ), Convert::ToBoolean( ds, geMean ), Convert::ToBoolean( ds, median ) );
Console::WriteLine( fmt, "ToByte", Convert::ToByte( ds, null ), Convert::ToByte( ds, geMean ), Convert::ToByte( ds, median ) );
Console::WriteLine( fmt, "ToChar", Convert::ToChar( ds, null ), Convert::ToChar( ds, geMean ), Convert::ToChar( ds, median ) );
Console::WriteLine( "{0,-12}{1,20:yyyy-MM-dd HH:mm:ss}"
"{2,20:yyyy-MM-dd HH:mm:ss}{3,20:yyyy-MM-dd HH:mm:ss}", "ToDateTime", Convert::ToDateTime( ds, null ), Convert::ToDateTime( ds, geMean ), Convert::ToDateTime( ds, median ) );
Console::WriteLine( fmt, "ToDecimal", Convert::ToDecimal( ds, null ), Convert::ToDecimal( ds, geMean ), Convert::ToDecimal( ds, median ) );
Console::WriteLine( fmt, "ToDouble", Convert::ToDouble( ds, null ), Convert::ToDouble( ds, geMean ), Convert::ToDouble( ds, median ) );
Console::WriteLine( fmt, "ToInt16", Convert::ToInt16( ds, null ), Convert::ToInt16( ds, geMean ), Convert::ToInt16( ds, median ) );
Console::WriteLine( fmt, "ToInt32", Convert::ToInt32( ds, null ), Convert::ToInt32( ds, geMean ), Convert::ToInt32( ds, median ) );
Console::WriteLine( fmt, "ToInt64", Convert::ToInt64( ds, null ), Convert::ToInt64( ds, geMean ), Convert::ToInt64( ds, median ) );
Console::WriteLine( fmt, "ToSByte", Convert::ToSByte( ds, null ), Convert::ToSByte( ds, geMean ), Convert::ToSByte( ds, median ) );
Console::WriteLine( fmt, "ToSingle", Convert::ToSingle( ds, null ), Convert::ToSingle( ds, geMean ), Convert::ToSingle( ds, median ) );
Console::WriteLine( fmt, "ToUInt16", Convert::ToUInt16( ds, null ), Convert::ToUInt16( ds, geMean ), Convert::ToUInt16( ds, median ) );
Console::WriteLine( fmt, "ToUInt32", Convert::ToUInt32( ds, null ), Convert::ToUInt32( ds, geMean ), Convert::ToUInt32( ds, median ) );
Console::WriteLine( fmt, "ToUInt64", Convert::ToUInt64( ds, null ), Convert::ToUInt64( ds, geMean ), Convert::ToUInt64( ds, median ) );
}
int main()
{
Console::WriteLine( "This example of the "
"Convert::To<Type>( Object*, IFormatProvider* ) methods "
"\ngenerates the following output. The example "
"displays the values \nreturned by the methods, "
"using several IFormatProvider objects.\n" );
// To call a [ParamArray] method in C++, you cannot just
// list the parameters, you need to build an array.
array<Double>^dataElem = gcnew array<Double>(6);
dataElem[ 0 ] = 10.5;
dataElem[ 1 ] = 22.2;
dataElem[ 2 ] = 45.9;
dataElem[ 3 ] = 88.7;
dataElem[ 4 ] = 156.05;
dataElem[ 5 ] = 297.6;
DataSet^ ds1 = gcnew DataSet( dataElem );
DisplayDataSet( ds1 );
dataElem = gcnew array<Double>(5);
dataElem[ 0 ] = 359999.95;
dataElem[ 1 ] = 425000;
dataElem[ 2 ] = 499999.5;
dataElem[ 3 ] = 775000;
dataElem[ 4 ] = 1695000;
DataSet^ ds2 = gcnew DataSet( dataElem );
DisplayDataSet( ds2 );
}
/*
This example of the Convert::To<Type>( Object*, IFormatProvider* ) methods
generates the following output. The example displays the values
returned by the methods, using several IFormatProvider objects.
DataSet: [10.5, 22.2, 45.9, 88.7, 156.05, 297.6]
Convert:: Default Geometric Mean Median
--------- ------- -------------- ------
ToBoolean True True True
ToByte 103 59 67
ToChar g ; C
ToDateTime 2003-05-13 15:30:23 2003-05-13 15:29:39 2003-05-13 15:29:47
ToDecimal 103.491666666667 59.4332135445164 67.3
ToDouble 103.491666666667 59.4332135445164 67.3
ToInt16 103 59 67
ToInt32 103 59 67
ToInt64 103 59 67
ToSByte 103 59 67
ToSingle 103.4917 59.43321 67.3
ToUInt16 103 59 67
ToUInt32 103 59 67
ToUInt64 103 59 67
DataSet: [359999.95, 425000, 499999.5, 775000, 1695000]
Convert:: Default Geometric Mean Median
--------- ------- -------------- ------
ToBoolean True True True
ToByte 255 255 255
ToChar ? ? ?
ToDateTime 2003-05-22 08:05:19 2003-05-20 22:54:57 2003-05-19 10:21:59
ToDecimal 750999.89 631577.237188435 499999.5
ToDouble 750999.89 631577.237188435 499999.5
ToInt16 32767 32767 32767
ToInt32 751000 631577 500000
ToInt64 751000 631577 500000
ToSByte 127 127 127
ToSingle 750999.9 631577.3 499999.5
ToUInt16 65535 65535 65535
ToUInt32 751000 631577 500000
ToUInt64 751000 631577 500000
*/
using System;
using System.Collections;
// Define the types of averaging available in the class
// implementing IConvertible.
public enum AverageType : short
{
None = 0,
GeometricMean = 1,
ArithmeticMean = 2,
Median = 3
};
// Pass an instance of this class to methods that require an
// IFormatProvider. The class instance determines the type of
// average to calculate.
public class AverageInfo : IFormatProvider
{
protected AverageType AvgType;
// Specify the type of averaging in the constructor.
public AverageInfo( AverageType avgType )
{
this.AvgType = avgType;
}
// This method returns a reference to the containing object
// if an object of AverageInfo type is requested.
public object GetFormat( Type argType )
{
if ( argType == typeof( AverageInfo ) )
return this;
else
return null;
}
// Use this property to set or get the type of averaging.
public AverageType TypeOfAverage
{
get { return this.AvgType; }
set { this.AvgType = value; }
}
}
// This class encapsulates an array of double values and implements
// the IConvertible interface. Most of the IConvertible methods
// return an average of the array elements in one of three types:
// arithmetic mean, geometric mean, or median.
public class DataSet : IConvertible
{
protected ArrayList data;
protected AverageInfo defaultProvider;
// Construct the object and add an initial list of values.
// Create a default format provider.
public DataSet( params double[ ] values )
{
data = new ArrayList( values );
defaultProvider =
new AverageInfo( AverageType.ArithmeticMean );
}
// Add additional values with this method.
public int Add( double value )
{
data.Add( value );
return data.Count;
}
// Get, set, and add values with this indexer property.
public double this[ int index ]
{
get
{
if( index >= 0 && index < data.Count )
return (double)data[ index ];
else
throw new InvalidOperationException(
"[DataSet.get] Index out of range." );
}
set
{
if( index >= 0 && index < data.Count )
data[ index ] = value;
else if( index == data.Count )
data.Add( value );
else
throw new InvalidOperationException(
"[DataSet.set] Index out of range." );
}
}
// This property returns the number of elements in the object.
public int Count
{
get { return data.Count; }
}
// This method calculates the average of the object's elements.
protected double Average( AverageType avgType )
{
double SumProd;
if( data.Count == 0 )
return 0.0;
switch( avgType )
{
case AverageType.GeometricMean:
SumProd = 1.0;
for( int Index = 0; Index < data.Count; Index++ )
SumProd *= (double)data[ Index ];
// This calculation will not fail with negative
// elements.
return Math.Sign( SumProd ) * Math.Pow(
Math.Abs( SumProd ), 1.0 / data.Count );
case AverageType.ArithmeticMean:
SumProd = 0.0;
for( int Index = 0; Index < data.Count; Index++ )
SumProd += (double)data[ Index ];
return SumProd / data.Count;
case AverageType.Median:
if( data.Count % 2 == 0 )
return ( (double)data[ data.Count / 2 ] +
(double)data[ data.Count / 2 - 1 ] ) / 2.0;
else
return (double)data[ data.Count / 2 ];
default:
return 0.0;
}
}
// Get the AverageInfo object from the caller's format provider,
// or use the local default.
protected AverageInfo GetAverageInfo( IFormatProvider provider )
{
AverageInfo avgInfo = null;
if( provider != null )
avgInfo = (AverageInfo)provider.GetFormat(
typeof( AverageInfo ) );
if ( avgInfo == null )
return defaultProvider;
else
return avgInfo;
}
// Calculate the average and limit the range.
protected double CalcNLimitAverage( double min, double max,
IFormatProvider provider )
{
// Get the format provider and calculate the average.
AverageInfo avgInfo = GetAverageInfo( provider );
double avg = Average( avgInfo.TypeOfAverage );
// Limit the range, based on the minimum and maximum values
// for the type.
return avg > max ? max : avg < min ? min : avg;
}
// The following elements are required by IConvertible.
// None of these conversion functions throw exceptions. When
// the data is out of range for the type, the appropriate
// MinValue or MaxValue is used.
public TypeCode GetTypeCode( )
{
return TypeCode.Object;
}
public bool ToBoolean( IFormatProvider provider )
{
// ToBoolean is false if the dataset is empty.
if( data.Count <= 0 )
{
return false;
}
// For median averaging, ToBoolean is true if any
// non-discarded elements are nonzero.
else if( AverageType.Median ==
GetAverageInfo( provider ).TypeOfAverage )
{
if (data.Count % 2 == 0 )
return ( (double)data[ data.Count / 2 ] != 0.0 ||
(double)data[ data.Count / 2 - 1 ] != 0.0 );
else
return (double)data[ data.Count / 2 ] != 0.0;
}
// For arithmetic or geometric mean averaging, ToBoolean is
// true if any element of the dataset is nonzero.
else
{
for( int Index = 0; Index < data.Count; Index++ )
if( (double)data[ Index ] != 0.0 )
return true;
return false;
}
}
public byte ToByte( IFormatProvider provider )
{
return Convert.ToByte( CalcNLimitAverage(
Byte.MinValue, Byte.MaxValue, provider ) );
}
public char ToChar( IFormatProvider provider )
{
return Convert.ToChar( Convert.ToUInt16( CalcNLimitAverage(
Char.MinValue, Char.MaxValue, provider ) ) );
}
// Convert to DateTime by adding the calculated average as
// seconds to the current date and time. A valid DateTime is
// always returned.
public DateTime ToDateTime( IFormatProvider provider )
{
double seconds =
Average( GetAverageInfo( provider ).TypeOfAverage );
try
{
return DateTime.Now.AddSeconds( seconds );
}
catch( ArgumentOutOfRangeException )
{
return seconds < 0.0 ? DateTime.MinValue : DateTime.MaxValue;
}
}
public decimal ToDecimal( IFormatProvider provider )
{
// The Double conversion rounds Decimal.MinValue and
// Decimal.MaxValue to invalid Decimal values, so the
// following limits must be used.
return Convert.ToDecimal( CalcNLimitAverage(
-79228162514264330000000000000.0,
79228162514264330000000000000.0, provider ) );
}
public double ToDouble( IFormatProvider provider )
{
return Average( GetAverageInfo(provider).TypeOfAverage );
}
public short ToInt16( IFormatProvider provider )
{
return Convert.ToInt16( CalcNLimitAverage(
Int16.MinValue, Int16.MaxValue, provider ) );
}
public int ToInt32( IFormatProvider provider )
{
return Convert.ToInt32( CalcNLimitAverage(
Int32.MinValue, Int32.MaxValue, provider ) );
}
public long ToInt64( IFormatProvider provider )
{
// The Double conversion rounds Int64.MinValue and
// Int64.MaxValue to invalid Int64 values, so the following
// limits must be used.
return Convert.ToInt64( CalcNLimitAverage(
-9223372036854775000, 9223372036854775000, provider ) );
}
public SByte ToSByte( IFormatProvider provider )
{
return Convert.ToSByte( CalcNLimitAverage(
SByte.MinValue, SByte.MaxValue, provider ) );
}
public float ToSingle( IFormatProvider provider )
{
return Convert.ToSingle( CalcNLimitAverage(
Single.MinValue, Single.MaxValue, provider ) );
}
public UInt16 ToUInt16( IFormatProvider provider )
{
return Convert.ToUInt16( CalcNLimitAverage(
UInt16.MinValue, UInt16.MaxValue, provider ) );
}
public UInt32 ToUInt32( IFormatProvider provider )
{
return Convert.ToUInt32( CalcNLimitAverage(
UInt32.MinValue, UInt32.MaxValue, provider ) );
}
public UInt64 ToUInt64( IFormatProvider provider )
{
// The Double conversion rounds UInt64.MaxValue to an invalid
// UInt64 value, so the following limit must be used.
return Convert.ToUInt64( CalcNLimitAverage(
0, 18446744073709550000.0, provider ) );
}
public object ToType( Type conversionType,
IFormatProvider provider )
{
return Convert.ChangeType( Average(
GetAverageInfo( provider ).TypeOfAverage ),
conversionType );
}
public string ToString( IFormatProvider provider )
{
AverageType avgType = GetAverageInfo( provider ).TypeOfAverage;
return String.Format( "( {0}: {1:G10} )", avgType,
Average( avgType ) );
}
}
class IConvertibleProviderDemo
{
// Display a DataSet with three different format providers.
public static void DisplayDataSet( DataSet ds )
{
string fmt = "{0,-12}{1,20}{2,20}{3,20}";
AverageInfo median = new AverageInfo( AverageType.Median );
AverageInfo geMean =
new AverageInfo( AverageType.GeometricMean );
// Display the dataset elements.
if( ds.Count > 0 )
{
Console.Write( "\nDataSet: [{0}", ds[ 0 ] );
for( int iX = 1; iX < ds.Count; iX++ )
Console.Write( ", {0}", ds[ iX ] );
Console.WriteLine( "]\n" );
}
Console.WriteLine( fmt, "Convert.", "Default",
"Geometric Mean", "Median");
Console.WriteLine( fmt, "--------", "-------",
"--------------", "------");
Console.WriteLine( fmt, "ToBoolean",
Convert.ToBoolean( ds, null ),
Convert.ToBoolean( ds, geMean ),
Convert.ToBoolean( ds, median ) );
Console.WriteLine( fmt, "ToByte",
Convert.ToByte( ds, null ),
Convert.ToByte( ds, geMean ),
Convert.ToByte( ds, median ) );
Console.WriteLine( fmt, "ToChar",
Convert.ToChar( ds, null ),
Convert.ToChar( ds, geMean ),
Convert.ToChar( ds, median ) );
Console.WriteLine( "{0,-12}{1,20:yyyy-MM-dd HH:mm:ss}" +
"{2,20:yyyy-MM-dd HH:mm:ss}{3,20:yyyy-MM-dd HH:mm:ss}",
"ToDateTime", Convert.ToDateTime( ds, null ),
Convert.ToDateTime( ds, geMean ),
Convert.ToDateTime( ds, median ) );
Console.WriteLine( fmt, "ToDecimal",
Convert.ToDecimal( ds, null ),
Convert.ToDecimal( ds, geMean ),
Convert.ToDecimal( ds, median ) );
Console.WriteLine( fmt, "ToDouble",
Convert.ToDouble( ds, null ),
Convert.ToDouble( ds, geMean ),
Convert.ToDouble( ds, median ) );
Console.WriteLine( fmt, "ToInt16",
Convert.ToInt16( ds, null ),
Convert.ToInt16( ds, geMean ),
Convert.ToInt16( ds, median ) );
Console.WriteLine( fmt, "ToInt32",
Convert.ToInt32( ds, null ),
Convert.ToInt32( ds, geMean ),
Convert.ToInt32( ds, median ) );
Console.WriteLine( fmt, "ToInt64",
Convert.ToInt64( ds, null ),
Convert.ToInt64( ds, geMean ),
Convert.ToInt64( ds, median ) );
Console.WriteLine( fmt, "ToSByte",
Convert.ToSByte( ds, null ),
Convert.ToSByte( ds, geMean ),
Convert.ToSByte( ds, median ) );
Console.WriteLine( fmt, "ToSingle",
Convert.ToSingle( ds, null ),
Convert.ToSingle( ds, geMean ),
Convert.ToSingle( ds, median ) );
Console.WriteLine( fmt, "ToUInt16",
Convert.ToUInt16( ds, null ),
Convert.ToUInt16( ds, geMean ),
Convert.ToUInt16( ds, median ) );
Console.WriteLine( fmt, "ToUInt32",
Convert.ToUInt32( ds, null ),
Convert.ToUInt32( ds, geMean ),
Convert.ToUInt32( ds, median ) );
Console.WriteLine( fmt, "ToUInt64",
Convert.ToUInt64( ds, null ),
Convert.ToUInt64( ds, geMean ),
Convert.ToUInt64( ds, median ) );
}
public static void Main( )
{
Console.WriteLine( "This example of " +
"the Convert.To<Type>( object, IFormatProvider ) methods " +
"\ngenerates the following output. The example " +
"displays the values \nreturned by the methods, " +
"using several IFormatProvider objects.\n" );
DataSet ds1 = new DataSet(
10.5, 22.2, 45.9, 88.7, 156.05, 297.6 );
DisplayDataSet( ds1 );
DataSet ds2 = new DataSet(
359999.95, 425000, 499999.5, 775000, 1695000 );
DisplayDataSet( ds2 );
}
}
/*
This example of the Convert.To<Type>( object, IFormatProvider ) methods
generates the following output. The example displays the values
returned by the methods, using several IFormatProvider objects.
DataSet: [10.5, 22.2, 45.9, 88.7, 156.05, 297.6]
Convert. Default Geometric Mean Median
-------- ------- -------------- ------
ToBoolean True True True
ToByte 103 59 67
ToChar g ; C
ToDateTime 2003-05-13 15:04:12 2003-05-13 15:03:28 2003-05-13 15:03:35
ToDecimal 103.491666666667 59.4332135445164 67.3
ToDouble 103.491666666667 59.4332135445164 67.3
ToInt16 103 59 67
ToInt32 103 59 67
ToInt64 103 59 67
ToSByte 103 59 67
ToSingle 103.4917 59.43321 67.3
ToUInt16 103 59 67
ToUInt32 103 59 67
ToUInt64 103 59 67
DataSet: [359999.95, 425000, 499999.5, 775000, 1695000]
Convert. Default Geometric Mean Median
-------- ------- -------------- ------
ToBoolean True True True
ToByte 255 255 255
ToChar ? ? ?
ToDateTime 2003-05-22 07:39:08 2003-05-20 22:28:45 2003-05-19 09:55:48
ToDecimal 750999.89 631577.237188435 499999.5
ToDouble 750999.89 631577.237188435 499999.5
ToInt16 32767 32767 32767
ToInt32 751000 631577 500000
ToInt64 751000 631577 500000
ToSByte 127 127 127
ToSingle 750999.9 631577.3 499999.5
ToUInt16 65535 65535 65535
ToUInt32 751000 631577 500000
ToUInt64 751000 631577 500000
*/
Imports System.Collections
Module IConvertibleProviderDemo
' Define the types of averaging available in the class
' implementing IConvertible.
Enum AverageType as Short
None = 0
GeometricMean = 1
ArithmeticMean = 2
Median = 3
End Enum
' Pass an instance of this class to methods that require an
' IFormatProvider. The class instance determines the type of
' average to calculate.
Public Class AverageInfo
Implements IFormatProvider
Protected AvgType As AverageType
' Specify the type of averaging in the constructor.
Public Sub New( avgType As AverageType )
Me.AvgType = avgType
End Sub
' This method returns a reference to the containing object
' if an object of AverageInfo type is requested.
Public Function GetFormat( argType As Type ) As Object _
Implements IFormatProvider.GetFormat
If argType Is GetType( AverageInfo ) Then
Return Me
Else
Return Nothing
End If
End Function
' Use this property to set or get the type of averaging.
Public Property TypeOfAverage( ) As AverageType
Get
Return Me.AvgType
End Get
Set( ByVal value as AverageType )
Me.AvgType = value
End Set
End Property
End Class
' This class encapsulates an array of Double values and implements
' the IConvertible interface. Most of the IConvertible methods
' return an average of the array elements in one of three types:
' arithmetic mean, geometric mean, or median.
Public Class DataSet
Implements IConvertible
Protected data As ArrayList
Protected defaultProvider As AverageInfo
' Construct the object and add an initial list of values.
' Create a default format provider.
Public Sub New( ParamArray values( ) As Double )
data = New ArrayList( values )
defaultProvider = New AverageInfo( _
AverageType.ArithmeticMean )
End Sub
' Add additional values with this method.
Public Function Add( value As Double ) As Integer
data.Add( value )
Return data.Count
End Function
' Get, set, and add values with this indexer property.
Default Public Property Item(index As Integer) As Double
Get
If index >= 0 AndAlso index < data.Count Then
Return System.Convert.ToDouble( data( index ) )
Else
Throw New InvalidOperationException( _
"[DataSet.get] Index out of range." )
End If
End Get
Set
If index >= 0 AndAlso index < data.Count Then
data( index ) = value
ElseIf index = data.Count Then
data.Add( value )
Else
Throw New InvalidOperationException( _
"[DataSet.set] Index out of range." )
End If
End Set
End Property
' This property returns the number of elements in the object.
Public ReadOnly Property Count( ) As Integer
Get
Return data.Count
End Get
End Property
' This method calculates the average of the object's elements.
Protected Function Average( ByVal avgType As AverageType ) As Double
Dim SumProd As Double
Dim Index As Integer
If data.Count = 0 Then Return 0.0
Select Case avgType
Case AverageType.GeometricMean
SumProd = 1.0
For Index = 0 To data.Count - 1
SumProd *= data( Index )
Next Index
' This calculation will not fail with negative
' elements.
Return Math.Sign( SumProd ) * Math.Pow( _
Math.Abs( SumProd ), 1.0 / data.Count )
Case AverageType.ArithmeticMean
SumProd = 0.0
For Index = 0 To data.Count - 1
SumProd += data( Index )
Next Index
Return SumProd / data.Count
Case AverageType.Median
If data.Count Mod 2 = 0 Then
Return ( data( data.Count \ 2 ) + _
data( data.Count \ 2 - 1 ) ) / 2.0
Else
Return data( data.Count \ 2 )
End If
End Select
End Function
' Get the AverageInfo object from the caller's format
' provider, or use the local default.
Protected Function GetAverageInfo( _
provider As IFormatProvider ) As AverageInfo
Dim avgInfo As AverageInfo = Nothing
If Not provider Is Nothing Then
avgInfo = provider.GetFormat( GetType( AverageInfo ) )
End If
Return IIf( avgInfo Is Nothing, defaultProvider, avgInfo )
End Function
' Calculate the average and limit the range.
Protected Function CalcNLimitAverage( min As Double, _
max As Double, provider as IFormatProvider ) As Double
' Get the format provider and calculate the average.
Dim avgInfo As AverageInfo = GetAverageInfo( provider )
Dim avg As Double = Average( avgInfo.TypeOfAverage )
' Limit the range, based on the minimum and maximum values
' for the type.
Return IIf( avg > max, max, IIf( avg < min, min, avg ) )
End Function
' The following elements are required by IConvertible.
' None of these conversion functions throw exceptions. When
' the data is out of range for the type, the appropriate
' MinValue or MaxValue is used.
Public Function GetTypeCode( ) As TypeCode _
Implements IConvertible.GetTypeCode
Return TypeCode.Object
End Function
Function ToBoolean( ByVal provider As IFormatProvider ) As _
Boolean Implements IConvertible.ToBoolean
' ToBoolean is false if the dataset is empty.
If data.Count <= 0 Then
Return False
' For median averaging, ToBoolean is true if any
' non-discarded elements are nonzero.
ElseIf AverageType.Median = _
GetAverageInfo( provider ).TypeOfAverage Then
If data.Count Mod 2 = 0 Then
Return ( data( data.Count \ 2 ) <> 0.0 Or _
data( data.Count \ 2 - 1 ) <> 0.0 )
Else
Return data( data.Count \ 2 ) <> 0.0
End If
' For arithmetic or geometric mean averaging, ToBoolean is
' true if any element of the dataset is nonzero.
Else
Dim Index As Integer
For Index = 0 To data.Count - 1
If data( Index ) <> 0.0 Then Return True
Next Index
Return False
End If
End Function
Function ToByte( ByVal provider As IFormatProvider ) As Byte _
Implements IConvertible.ToByte
Return Convert.ToByte( CalcNLimitAverage( _
Byte.MinValue, Byte.MaxValue, provider ) )
End Function
Function ToChar( ByVal provider As IFormatProvider ) As Char _
Implements IConvertible.ToChar
Return Convert.ToChar( Convert.ToUInt16( _
CalcNLimitAverage( 0.0, &HFFFF, provider ) ) )
End Function
' Convert to DateTime by adding the calculated average as
' seconds to the current date and time. A valid DateTime is
' always returned.
Function ToDateTime( ByVal provider As IFormatProvider ) As _
DateTime Implements IConvertible.ToDateTime
Dim seconds As Double = Average( _
GetAverageInfo( provider ).TypeOfAverage )
Try
Return DateTime.Now.AddSeconds( seconds )
Catch ex As ArgumentOutOfRangeException
Return IIf( seconds < 0.0, DateTime.MinValue, _
DateTime.MaxValue )
End Try
End Function
Function ToDecimal( ByVal provider As IFormatProvider ) As _
Decimal Implements IConvertible.ToDecimal
' The Double conversion rounds Decimal.MinValue and
' Decimal.MaxValue to invalid Decimal values, so the
' following limits must be used.
Return Convert.ToDecimal( CalcNLimitAverage( _
-79228162514264330000000000000.0, _
79228162514264330000000000000.0, provider ) )
End Function
Function ToDouble( ByVal provider As IFormatProvider) As _
Double Implements IConvertible.ToDouble
Return Average( GetAverageInfo( provider ).TypeOfAverage )
End Function
Function ToInt16( ByVal provider As IFormatProvider ) As _
Short Implements IConvertible.ToInt16
Return Convert.ToInt16( CalcNLimitAverage( _
Int16.MinValue, Int16.MaxValue, provider ) )
End Function
Function ToInt32( ByVal provider As IFormatProvider ) As _
Integer Implements IConvertible.ToInt32
Return Convert.ToInt32( CalcNLimitAverage( _
Int32.MinValue, Int32.MaxValue, provider ) )
End Function
Function ToInt64( ByVal provider As IFormatProvider ) As Long _
Implements IConvertible.ToInt64
' The Double conversion rounds Int64.MinValue and
' Int64.MaxValue to invalid Long values, so the following
' limits must be used.
Return Convert.ToInt64( CalcNLimitAverage( _
-9223372036854775000, 9223372036854775000, provider ) )
End Function
Function ToSByte( ByVal provider As IFormatProvider ) As _
SByte Implements IConvertible.ToSByte
' SByte.MinValue and SByte.MaxValue are not defined in
' Visual Basic.
Return Convert.ToSByte( CalcNLimitAverage( _
-128, 127, provider ) )
End Function
Function ToSingle( ByVal provider As IFormatProvider ) As _
Single Implements IConvertible.ToSingle
Return Convert.ToSingle( CalcNLimitAverage( _
Single.MinValue, Single.MaxValue, provider ) )
End Function
Function ToUInt16( ByVal provider As IFormatProvider ) As _
UInt16 Implements IConvertible.ToUInt16
' UInt16.MinValue and UInt16.MaxValue are not defined in
' Visual Basic.
Return Convert.ToUInt16( CalcNLimitAverage( _
0, &HFFFF, provider ) )
End Function
Function ToUInt32( ByVal provider As IFormatProvider ) As _
UInt32 Implements IConvertible.ToUInt32
' UInt32.MinValue and UInt32.MaxValue are not defined in
' Visual Basic.
Return Convert.ToUInt32( CalcNLimitAverage( _
0, 4294967295, provider ) )
End Function
Function ToUInt64( ByVal provider As IFormatProvider ) As _
UInt64 Implements IConvertible.ToUInt64
' UInt64.MinValue and UInt64.MaxValue are not defined in
' Visual Basic. The Double conversion would have rounded
' UInt64.MaxValue, so the following limit must be used.
Return Convert.ToUInt64( CalcNLimitAverage( _
0, 18446744073709550000.0, provider ) )
End Function
Function ToType( ByVal conversionType As Type, _
ByVal provider As IFormatProvider) As Object _
Implements IConvertible.ToType
Return Convert.ChangeType( Average( GetAverageInfo( _
provider ).TypeOfAverage ), conversionType )
End Function
Overloads Function ToString( ByVal provider As IFormatProvider _
) As String Implements IConvertible.ToString
Dim avgType as AverageType = _
GetAverageInfo( provider ).TypeOfAverage
Return String.Format( "( {0}: {1:G10} )", avgType, _
Average( avgType ) )
End Function
End Class
' Display a DataSet with three different format providers.
Sub DisplayDataSet( ds As DataSet )
Dim fmt As String = "{0,-12}{1,20}{2,20}{3,20}"
Dim median As AverageInfo = New AverageInfo( AverageType.Median )
Dim geMean As AverageInfo = _
New AverageInfo( AverageType.GeometricMean )
Dim iX As Integer
' Display the dataset elements.
If ds.Count > 0 Then
Console.Write( vbCrLf & "DataSet: [{0}", ds( 0 ) )
For iX = 1 To ds.Count - 1
Console.Write( ", {0}", ds( iX ) )
Next iX
Console.WriteLine( "]" & vbCrLf )
End If
Console.WriteLine( fmt, "Convert.", "Default", _
"Geometric Mean", "Median" )
Console.WriteLine( fmt, "--------", "-------", _
"--------------", "------" )
Console.WriteLine( fmt, "ToBoolean", _
Convert.ToBoolean( ds, Nothing ), _
Convert.ToBoolean( ds, geMean ), _
Convert.ToBoolean( ds, median ) )
Console.WriteLine( fmt, "ToByte", _
Convert.ToByte( ds, Nothing ), _
Convert.ToByte( ds, geMean ), _
Convert.ToByte( ds, median ) )
Console.WriteLine( fmt, "ToChar", _
Convert.ToChar( ds, Nothing ), _
Convert.ToChar( ds, geMean ), _
Convert.ToChar( ds, median ) )
Console.WriteLine( "{0,-12}{1,20:yyyy-MM-dd HH:mm:ss}" & _
"{2,20:yyyy-MM-dd HH:mm:ss}{3,20:yyyy-MM-dd HH:mm:ss}", _
"ToDateTime", Convert.ToDateTime( ds, Nothing ), _
Convert.ToDateTime( ds, geMean ), _
Convert.ToDateTime( ds, median ) )
Console.WriteLine( fmt, "ToDecimal", _
Convert.ToDecimal( ds, Nothing ), _
Convert.ToDecimal( ds, geMean ), _
Convert.ToDecimal( ds, median ) )
Console.WriteLine( fmt, "ToDouble", _
Convert.ToDouble( ds, Nothing ), _
Convert.ToDouble( ds, geMean ), _
Convert.ToDouble( ds, median ) )
Console.WriteLine( fmt, "ToInt16", _
Convert.ToInt16( ds, Nothing ), _
Convert.ToInt16( ds, geMean ), _
Convert.ToInt16( ds, median ) )
Console.WriteLine( fmt, "ToInt32", _
Convert.ToInt32( ds, Nothing ), _
Convert.ToInt32( ds, geMean ), _
Convert.ToInt32( ds, median ) )
Console.WriteLine( fmt, "ToInt64", _
Convert.ToInt64( ds, Nothing ), _
Convert.ToInt64( ds, geMean ), _
Convert.ToInt64( ds, median ) )
Console.WriteLine( fmt, "ToSByte", _
Convert.ToSByte( ds, Nothing ), _
Convert.ToSByte( ds, geMean ), _
Convert.ToSByte( ds, median ) )
Console.WriteLine( fmt, "ToSingle", _
Convert.ToSingle( ds, Nothing ), _
Convert.ToSingle( ds, geMean ), _
Convert.ToSingle( ds, median ) )
Console.WriteLine( fmt, "ToUInt16", _
Convert.ToUInt16( ds, Nothing ), _
Convert.ToUInt16( ds, geMean ), _
Convert.ToUInt16( ds, median ) )
Console.WriteLine( fmt, "ToUInt32", _
Convert.ToUInt32( ds, Nothing ), _
Convert.ToUInt32( ds, geMean ), _
Convert.ToUInt32( ds, median ) )
Console.WriteLine( fmt, "ToUInt64", _
Convert.ToUInt64( ds, Nothing ), _
Convert.ToUInt64( ds, geMean ), _
Convert.ToUInt64( ds, median ) )
End Sub
Sub Main( )
Console.WriteLine( _
"This example of the Convert.To<Type>( Object, " & _
"IFormatProvider ) methods " & vbCrLf & "generates " & _
"the following output. The example displays the " & _
"values " & vbCrLf & "returned by the methods, " & _
"using several IFormatProvider objects." & vbCrLf )
Dim ds1 As New DataSet( 10.5, 22.2, 45.9, 88.7, 156.05, 297.6 )
DisplayDataSet( ds1 )
Dim ds2 As New DataSet( _
359999.95, 425000, 499999.5, 775000, 1695000 )
DisplayDataSet( ds2 )
End Sub
End Module
' This example of the Convert.To<Type>( Object, IFormatProvider ) methods
' generates the following output. The example displays the values
' returned by the methods, using several IFormatProvider objects.
'
' DataSet: [10.5, 22.2, 45.9, 88.7, 156.05, 297.6]
'
' Convert. Default Geometric Mean Median
' -------- ------- -------------- ------
' ToBoolean True True True
' ToByte 103 59 67
' ToChar g ; C
' ToDateTime 2003-05-13 14:52:53 2003-05-13 14:52:09 2003-05-13 14:52:17
' ToDecimal 103.491666666667 59.4332135445164 67.3
' ToDouble 103.491666666667 59.4332135445164 67.3
' ToInt16 103 59 67
' ToInt32 103 59 67
' ToInt64 103 59 67
' ToSByte 103 59 67
' ToSingle 103.4917 59.43321 67.3
' ToUInt16 103 59 67
' ToUInt32 103 59 67
' ToUInt64 103 59 67
'
' DataSet: [359999.95, 425000, 499999.5, 775000, 1695000]
'
' Convert. Default Geometric Mean Median
' -------- ------- -------------- ------
' ToBoolean True True True
' ToByte 255 255 255
' ToChar ? ? ?
' ToDateTime 2003-05-22 07:27:49 2003-05-20 22:17:27 2003-05-19 09:44:29
' ToDecimal 750999.89 631577.237188435 499999.5
' ToDouble 750999.89 631577.237188435 499999.5
' ToInt16 32767 32767 32767
' ToInt32 751000 631577 500000
' ToInt64 751000 631577 500000
' ToSByte 127 127 127
' ToSingle 750999.9 631577.3 499999.5
' ToUInt16 65535 65535 65535
' ToUInt32 751000 631577 500000
' ToUInt64 751000 631577 500000
Commenti
Il valore restituito è il risultato della chiamata al IConvertible.ToChar metodo del tipo sottostante di value
.The return value is the result of invoking the IConvertible.ToChar method of the underlying type of value
.
provider
consente all'utente di specificare le informazioni relative alla conversione specifiche delle impostazioni cultura relative al contenuto di value
.provider
enables the user to specify culture-specific conversion information about the contents of value
. I tipi di base ignorano provider
; tuttavia, il parametro può essere usato se value
è un tipo definito dall'utente che implementa l' IConvertible interfaccia.The base types ignore provider
; however, the parameter may be used if value
is a user-defined type that implements the IConvertible interface.
Si applica a
ToChar(UInt64)
Importante
Questa API non è conforme a CLS.
Converte il valore dell'intero senza segno a 64 bit specificato nel carattere Unicode equivalente.Converts the value of the specified 64-bit unsigned integer to its equivalent Unicode character.
public:
static char ToChar(System::UInt64 value);
[System.CLSCompliant(false)]
public static char ToChar (ulong value);
[<System.CLSCompliant(false)>]
static member ToChar : uint64 -> char
Public Shared Function ToChar (value As ULong) As Char
Parametri
- value
- UInt64
Intero senza segno a 64 bit da convertire.The 64-bit unsigned integer to convert.
Restituisce
Carattere Unicode equivalente a value
.A Unicode character that is equivalent to value
.
- Attributi
Eccezioni
Esempio
Nell'esempio seguente ogni elemento di una matrice di interi senza segno viene convertito in un Char valore.The following example converts each element in an array of unsigned long integers to a Char value.
ulong[] numbers = { UInt64.MinValue, 40, 160, 255, 1028,
2011, 30001, 207154, Int64.MaxValue };
char result;
foreach (ulong number in numbers)
{
try {
result = Convert.ToChar(number);
Console.WriteLine("{0} converts to '{1}'.", number, result);
}
catch (OverflowException) {
Console.WriteLine("{0} is outside the range of the Char data type.",
number);
}
}
// The example displays the following output:
// 0 converts to ' '.
// 40 converts to '('.
// 160 converts to ' '.
// 255 converts to 'ÿ'.
// 1028 converts to '?'.
// 2011 converts to '?'.
// 30001 converts to '?'.
// 207154 is outside the range of the Char data type.
// 9223372036854775807 is outside the range of the Char data type.
Dim numbers() As ULong = { UInt64.MinValue, 40, 160, 255, 1028, _
2011, 30001, 207154, Int64.MaxValue }
Dim result As Char
For Each number As ULong In numbers
Try
result = Convert.ToChar(number)
Console.WriteLine("{0} converts to '{1}'.", number, result)
Catch e As OverflowException
Console.WriteLine("{0} is outside the range of the Char data type.", _
number)
End Try
Next
' The example displays the following output:
' 0 converts to ' '.
' 40 converts to '('.
' 160 converts to ' '.
' 255 converts to 'ÿ'.
' 1028 converts to '?'.
' 2011 converts to '?'.
' 30001 converts to '?'.
' 207154 is outside the range of the Char data type.
' 9223372036854775807 is outside the range of the Char data type.
Si applica a
ToChar(UInt32)
Importante
Questa API non è conforme a CLS.
Converte il valore dell'intero senza segno a 32 bit specificato nel carattere Unicode equivalente.Converts the value of the specified 32-bit unsigned integer to its equivalent Unicode character.
public:
static char ToChar(System::UInt32 value);
[System.CLSCompliant(false)]
public static char ToChar (uint value);
[<System.CLSCompliant(false)>]
static member ToChar : uint32 -> char
Public Shared Function ToChar (value As UInteger) As Char
Parametri
- value
- UInt32
Intero senza segno a 32 bit da convertire.The 32-bit unsigned integer to convert.
Restituisce
Carattere Unicode equivalente a value
.A Unicode character that is equivalent to value
.
- Attributi
Eccezioni
Esempio
Nell'esempio seguente ogni elemento di una matrice di interi senza segno viene convertito in un Char valore.The following example converts each element in an array of unsigned integers to a Char value.
uint[] numbers = { UInt32.MinValue, 40, 160, 255, 1028,
2011, 30001, 207154, Int32.MaxValue };
char result;
foreach (uint number in numbers)
{
try {
result = Convert.ToChar(number);
Console.WriteLine("{0} converts to '{1}'.", number, result);
}
catch (OverflowException) {
Console.WriteLine("{0} is outside the range of the Char data type.",
number);
}
}
// The example displays the following output:
// 0 converts to ' '.
// 40 converts to '('.
// 160 converts to ' '.
// 255 converts to 'ÿ'.
// 1028 converts to '?'.
// 2011 converts to '?'.
// 30001 converts to '?'.
// 207154 is outside the range of the Char data type.
// 2147483647 is outside the range of the Char data type.
Dim numbers() As UInteger = { UInt32.MinValue, 40, 160, 255, 1028, _
2011, 30001, 207154, Int32.MaxValue }
Dim result As Char
For Each number As UInteger In numbers
Try
result = Convert.ToChar(number)
Console.WriteLine("{0} converts to '{1}'.", number, result)
Catch e As OverflowException
Console.WriteLine("{0} is outside the range of the Char data type.", _
number)
End Try
Next
' The example displays the following output:
' 0 converts to ' '.
' 40 converts to '('.
' 160 converts to ' '.
' 255 converts to 'ÿ'.
' 1028 converts to '?'.
' 2011 converts to '?'.
' 30001 converts to '?'.
' 207154 is outside the range of the Char data type.
' 2147483647 is outside the range of the Char data type.
Si applica a
ToChar(UInt16)
Importante
Questa API non è conforme a CLS.
Converte il valore dell'intero senza segno a 16 bit specificato nel carattere Unicode equivalente.Converts the value of the specified 16-bit unsigned integer to its equivalent Unicode character.
public:
static char ToChar(System::UInt16 value);
[System.CLSCompliant(false)]
public static char ToChar (ushort value);
[<System.CLSCompliant(false)>]
static member ToChar : uint16 -> char
Public Shared Function ToChar (value As UShort) As Char
Parametri
- value
- UInt16
Intero senza segno a 16 bit da convertire.The 16-bit unsigned integer to convert.
Restituisce
Carattere Unicode equivalente a value
.A Unicode character that is equivalent to value
.
- Attributi
Esempio
Nell'esempio seguente ogni elemento di una matrice di interi senza segno a 16 bit viene convertito in un Char valore.The following example converts each element in an array of unsigned 16-bit integers to a Char value.
ushort[] numbers = { UInt16.MinValue, 40, 160, 255, 1028,
2011, UInt16.MaxValue };
char result;
foreach (ushort number in numbers)
{
result = Convert.ToChar(number);
Console.WriteLine("{0} converts to '{1}'.", number, result);
}
// The example displays the following output:
// 0 converts to ' '.
// 40 converts to '('.
// 160 converts to ' '.
// 255 converts to 'ÿ'.
// 1028 converts to '?'.
// 2011 converts to '?'.
// 65535 converts to '?'.
Dim numbers() As UShort = { UInt16.MinValue, 40, 160, 255, 1028, _
2011, UInt16.MaxValue }
Dim result As Char
For Each number As UShort In numbers
result = Convert.ToChar(number)
Console.WriteLine("{0} converts to '{1}'.", number, result)
Next
' The example displays the following output:
' 0 converts to ' '.
' 40 converts to '('.
' 160 converts to ' '.
' 255 converts to 'ÿ'.
' 1028 converts to '?'.
' 2011 converts to '?'.
' 65535 converts to '?'.
Si applica a
ToChar(String)
Converte il primo carattere di una stringa specificata in un carattere Unicode.Converts the first character of a specified string to a Unicode character.
public:
static char ToChar(System::String ^ value);
public static char ToChar (string value);
static member ToChar : string -> char
Public Shared Function ToChar (value As String) As Char
Parametri
- value
- String
Stringa di lunghezza 1.A string of length 1.
Restituisce
Carattere Unicode equivalente al primo e unico carattere in value
.A Unicode character that is equivalent to the first and only character in value
.
Eccezioni
value
è null
.value
is null
.
La lunghezza di value
non è 1.The length of value
is not 1.
Esempio
Nell'esempio seguente ogni elemento di una matrice di stringhe viene convertito in un Char valore.The following example converts each element in a string array to a Char value.
string nullString = null;
string[] strings = { "A", "This", '\u0007'.ToString(), nullString };
char result;
foreach (string strng in strings)
{
try {
result = Convert.ToChar(strng);
Console.WriteLine("'{0}' converts to '{1}'.", strng, result);
}
catch (FormatException)
{
Console.WriteLine("'{0}' is not in the correct format for conversion to a Char.",
strng);
}
catch (ArgumentNullException) {
Console.WriteLine("A null string cannot be converted to a Char.");
}
}
// The example displays the following output:
// 'A' converts to 'A'.
// 'This' is not in the correct format for conversion to a Char.
// ' ' converts to ' '.
// A null string cannot be converted to a Char.
Dim nullString As String = Nothing
Dim strings() As String = { "A", "This", vbTab, nullString }
Dim result As Char
For Each strng As String In strings
Try
result = Convert.ToChar(strng)
Console.WriteLine("'{0}' converts to '{1}'.", strng, result)
Catch e As FormatException
Console.WriteLine("'{0}' is not in the correct format for conversion to a Char.", _
strng)
Catch e As ArgumentNullException
Console.WriteLine("A null string cannot be converted to a Char.")
End Try
Next
' The example displays the following output:
' 'A' converts to 'A'.
' 'This' is not in the correct format for conversion to a Char.
' ' ' converts to ' '.
' A null string cannot be converted to a Char.
Commenti
value
deve essere una stringa che contiene un singolo carattere.value
must be a string that contains a single character.
Se si preferisce non gestire un'eccezione se la conversione non riesce, è invece possibile chiamare il Char.TryParse metodo.If you prefer not to handle an exception if the conversion fails, you can call the Char.TryParse method instead. Restituisce un Boolean valore che indica se la conversione ha avuto esito positivo o negativo.It returns a Boolean value that indicates whether the conversion succeeded or failed.
Si applica a
ToChar(Single)
La chiamata di questo metodo genera sempre un'eccezione InvalidCastException.Calling this method always throws InvalidCastException.
public:
static char ToChar(float value);
public static char ToChar (float value);
static member ToChar : single -> char
Public Shared Function ToChar (value As Single) As Char
Parametri
- value
- Single
Numero a virgola mobile a precisione singola da convertire.The single-precision floating-point number to convert.
Restituisce
Questa conversione non è supportata.This conversion is not supported. Non vengono restituiti valori.No value is returned.
Eccezioni
Questa conversione non è supportata.This conversion is not supported.
Si applica a
ToChar(SByte)
Importante
Questa API non è conforme a CLS.
Converte il valore dell'intero con segno a 8 bit specificato nel carattere Unicode equivalente.Converts the value of the specified 8-bit signed integer to its equivalent Unicode character.
public:
static char ToChar(System::SByte value);
[System.CLSCompliant(false)]
public static char ToChar (sbyte value);
[<System.CLSCompliant(false)>]
static member ToChar : sbyte -> char
Public Shared Function ToChar (value As SByte) As Char
Parametri
- value
- SByte
Intero con segno a 8 bit da convertire.The 8-bit signed integer to convert.
Restituisce
Carattere Unicode equivalente a value
.A Unicode character that is equivalent to value
.
- Attributi
Eccezioni
Esempio
Nell'esempio seguente viene convertita una matrice di byte con segno in Char valori.The following example converts an array of signed bytes to Char values.
sbyte[] numbers = { SByte.MinValue, -1, 40, 80, 120, SByte.MaxValue };
char result;
foreach (sbyte number in numbers)
{
try {
result = Convert.ToChar(number);
Console.WriteLine("{0} converts to '{1}'.", number, result);
}
catch (OverflowException) {
Console.WriteLine("{0} is outside the range of the Char data type.",
number);
}
}
// The example displays the following output:
// -128 is outside the range of the Char data type.
// -1 is outside the range of the Char data type.
// 40 converts to '('.
// 80 converts to 'P'.
// 120 converts to 'x'.
// 127 converts to '⌂'.
Dim numbers() As SByte = { SByte.MinValue, -1, 40, 80, 120, SByte.MaxValue }
Dim result As Char
For Each number As SByte In numbers
Try
result = Convert.ToChar(number)
Console.WriteLine("{0} converts to '{1}'.", number, result)
Catch e As OverflowException
Console.WriteLine("{0} is outside the range of the Char data type.", _
number)
End Try
Next
' The example displays the following output:
' -128 is outside the range of the Char data type.
' -1 is outside the range of the Char data type.
' 40 converts to '('.
' 80 converts to 'P'.
' 120 converts to 'x'.
' 127 converts to '⌂'.
Si applica a
ToChar(String, IFormatProvider)
Converte il primo carattere di una stringa specificata in un carattere Unicode mediante le informazioni di formattazione specifiche delle impostazioni cultura indicate.Converts the first character of a specified string to a Unicode character, using specified culture-specific formatting information.
public:
static char ToChar(System::String ^ value, IFormatProvider ^ provider);
public static char ToChar (string value, IFormatProvider provider);
public static char ToChar (string value, IFormatProvider? provider);
static member ToChar : string * IFormatProvider -> char
Public Shared Function ToChar (value As String, provider As IFormatProvider) As Char
Parametri
- value
- String
Stringa di lunghezza 1 oppure null
.A string of length 1 or null
.
- provider
- IFormatProvider
Oggetto che fornisce informazioni di formattazione specifiche delle impostazioni cultura.An object that supplies culture-specific formatting information. Questo parametro viene ignorato.This parameter is ignored.
Restituisce
Carattere Unicode equivalente al primo e unico carattere in value
.A Unicode character that is equivalent to the first and only character in value
.
Eccezioni
value
è null
.value
is null
.
La lunghezza di value
non è 1.The length of value
is not 1.
Esempio
Nell'esempio seguente viene convertita una rappresentazione di stringa di un Char valore con il ToChar
metodo, utilizzando un IFormatProvider oggetto che Visualizza il tipo del provider di formato per il quale viene chiamato.The following example converts a string representation of a Char value with the ToChar
method, using an IFormatProvider object that displays the type of the format provider for which it is called. Nell'esempio viene illustrato che non viene fatto riferimento al provider di formato.The example shows that the format provider is not referenced.
using namespace System;
using namespace System::Globalization;
ref class DummyProvider: public IFormatProvider
{
public:
// Normally, GetFormat returns an object of the requested type
// (usually itself) if it is able; otherwise, it returns Nothing.
virtual Object^ GetFormat( Type^ argType )
{
// Here, GetFormat displays the name of argType, after removing
// the namespace information. GetFormat always returns null.
String^ argStr = argType->ToString();
if ( argStr->Equals( "" ) )
argStr = "Empty";
argStr = argStr->Substring( argStr->LastIndexOf( '.' ) + 1 );
Console::Write( "{0,-20}", argStr );
return (Object^)0;
}
};
int main()
{
// Create an instance of IFormatProvider.
DummyProvider^ provider = gcnew DummyProvider;
String^ format = "{0,-17}{1,-17}{2}";
// Convert these values using DummyProvider.
String^ Int32A = "-252645135";
String^ DoubleA = "61680.3855";
String^ DayTimeA = "2001/9/11 13:45";
String^ BoolA = "True";
String^ StringA = "Qwerty";
String^ CharA = "$";
Console::WriteLine( "This example of selected "
"Convert::To<Type>( String*, IFormatProvider* ) \nmethods "
"generates the following output. The example displays the "
"\nprovider type if the IFormatProvider is called." );
Console::WriteLine( "\nNote: For the "
"ToBoolean, ToString, and ToChar methods, the \n"
"IFormatProvider object is not referenced." );
// The format provider is called for the following conversions.
Console::WriteLine();
Console::WriteLine( format, "ToInt32", Int32A, Convert::ToInt32( Int32A, provider ) );
Console::WriteLine( format, "ToDouble", DoubleA, Convert::ToDouble( DoubleA, provider ) );
Console::WriteLine( format, "ToDateTime", DayTimeA, Convert::ToDateTime( DayTimeA, provider ) );
// The format provider is not called for these conversions.
Console::WriteLine();
Console::WriteLine( format, "ToBoolean", BoolA, Convert::ToBoolean( BoolA, provider ) );
Console::WriteLine( format, "ToString", StringA, Convert::ToString( StringA, provider ) );
Console::WriteLine( format, "ToChar", CharA, Convert::ToChar( CharA, provider ) );
}
/*
This example of selected Convert::To<Type>( String*, IFormatProvider* )
methods generates the following output. The example displays the
provider type if the IFormatProvider is called.
Note: For the ToBoolean, ToString, and ToChar methods, the
IFormatProvider object is not referenced.
NumberFormatInfo ToInt32 -252645135 -252645135
NumberFormatInfo ToDouble 61680.3855 61680.3855
DateTimeFormatInfo ToDateTime 2001/9/11 13:45 9/11/2001 1:45:00 PM
ToBoolean True True
ToString Qwerty Qwerty
ToChar $ $
*/
using System;
using System.Globalization;
public class DummyProvider : IFormatProvider
{
// Normally, GetFormat returns an object of the requested type
// (usually itself) if it is able; otherwise, it returns Nothing.
public object GetFormat(Type argType)
{
// Here, GetFormat displays the name of argType, after removing
// the namespace information. GetFormat always returns null.
string argStr = argType.ToString( );
if( argStr == "" )
argStr = "Empty";
argStr = argStr.Substring( argStr.LastIndexOf( '.' ) + 1 );
Console.Write( "{0,-20}", argStr );
return null;
}
}
class ConvertNonNumericProviderDemo
{
public static void Main( )
{
// Create an instance of IFormatProvider.
DummyProvider provider = new DummyProvider( );
string format = "{0,-17}{1,-17}{2}";
// Convert these values using DummyProvider.
string Int32A = "-252645135";
string DoubleA = "61680.3855";
string DayTimeA = "2001/9/11 13:45";
string BoolA = "True";
string StringA = "Qwerty";
string CharA = "$";
Console.WriteLine( "This example of selected " +
"Convert.To<Type>( String, IFormatProvider ) \nmethods " +
"generates the following output. The example displays " +
"the \nprovider type if the IFormatProvider is called." );
Console.WriteLine( "\nNote: For the " +
"ToBoolean, ToString, and ToChar methods, the \n" +
"IFormatProvider object is not referenced." );
// The format provider is called for the following conversions.
Console.WriteLine( );
Console.WriteLine( format, "ToInt32", Int32A,
Convert.ToInt32( Int32A, provider ) );
Console.WriteLine( format, "ToDouble", DoubleA,
Convert.ToDouble( DoubleA, provider ) );
Console.WriteLine( format, "ToDateTime", DayTimeA,
Convert.ToDateTime( DayTimeA, provider ) );
// The format provider is not called for these conversions.
Console.WriteLine( );
Console.WriteLine( format, "ToBoolean", BoolA,
Convert.ToBoolean( BoolA, provider ) );
Console.WriteLine( format, "ToString", StringA,
Convert.ToString( StringA, provider ) );
Console.WriteLine( format, "ToChar", CharA,
Convert.ToChar( CharA, provider ) );
}
}
/*
This example of selected Convert.To<Type>( String, IFormatProvider )
methods generates the following output. The example displays the
provider type if the IFormatProvider is called.
Note: For the ToBoolean, ToString, and ToChar methods, the
IFormatProvider object is not referenced.
NumberFormatInfo ToInt32 -252645135 -252645135
NumberFormatInfo ToDouble 61680.3855 61680.3855
DateTimeFormatInfo ToDateTime 2001/9/11 13:45 9/11/2001 1:45:00 PM
ToBoolean True True
ToString Qwerty Qwerty
ToChar $ $
*/
Imports System.Globalization
Public Class DummyProvider
Implements IFormatProvider
' Normally, GetFormat returns an object of the requested type
' (usually itself) if it is able; otherwise, it returns Nothing.
Public Function GetFormat( argType As Type ) As Object _
Implements IFormatProvider.GetFormat
' Here, GetFormat displays the name of argType, after removing
' the namespace information. GetFormat always returns Nothing.
Dim argStr As String = argType.ToString( )
If argStr = "" Then argStr = "Empty"
argStr = argStr.Substring( argStr.LastIndexOf( "."c ) + 1 )
Console.Write( "{0,-20}", argStr )
Return Nothing
End Function
End Class
Module ConvertNonNumericProviderDemo
Sub Main( )
' Create an instance of IFormatProvider.
Dim provider As New DummyProvider( )
Dim format As String = "{0,-17}{1,-17}{2}"
' Convert these values using DummyProvider.
Dim Int32A As String = "-252645135"
Dim DoubleA As String = "61680.3855"
Dim DayTimeA As String = "2001/9/11 13:45"
Dim BoolA As String = "True"
Dim StringA As String = "Qwerty"
Dim CharA As String = "$"
Console.WriteLine( "This example of selected " & _
"Convert.To<Type>( String, IFormatProvider ) " & vbCrLf & _
"methods generates the following output. The example " & _
"displays the " & vbCrLf & "provider type if the " & _
"IFormatProvider is called." )
Console.WriteLine( vbCrLf & _
"Note: For the ToBoolean, ToString, and ToChar " & _
"methods, the " & vbCrLf & "IFormatProvider object " & _
"is not referenced." )
' The format provider is called for the following conversions.
Console.WriteLine( )
Console.WriteLine( format, "ToInt32", Int32A, _
Convert.ToInt32( Int32A, provider ) )
Console.WriteLine( format, "ToDouble", DoubleA, _
Convert.ToDouble( DoubleA, provider ) )
Console.WriteLine( format, "ToDateTime", DayTimeA, _
Convert.ToDateTime( DayTimeA, provider ) )
' The format provider is not called for these conversions.
Console.WriteLine( )
Console.WriteLine( format, "ToBoolean", BoolA, _
Convert.ToBoolean( BoolA, provider ) )
Console.WriteLine( format, "ToString", StringA, _
Convert.ToString( StringA, provider ) )
Console.WriteLine( format, "ToChar", CharA, _
Convert.ToChar( CharA, provider ) )
End Sub
End Module
' This example of selected Convert.To<Type>( String, IFormatProvider )
' methods generates the following output. The example displays the
' provider type if the IFormatProvider is called.
'
' Note: For the ToBoolean, ToString, and ToChar methods, the
' IFormatProvider object is not referenced.
'
' NumberFormatInfo ToInt32 -252645135 -252645135
' NumberFormatInfo ToDouble 61680.3855 61680.3855
' DateTimeFormatInfo ToDateTime 2001/9/11 13:45 9/11/2001 1:45:00 PM
'
' ToBoolean True True
' ToString Qwerty Qwerty
' ToChar $ $
Commenti
value
deve essere una stringa che contiene un singolo carattere.value
must be a string that contains a single character.
Se si preferisce non gestire un'eccezione se la conversione non riesce, è invece possibile chiamare il Char.TryParse metodo.If you prefer not to handle an exception if the conversion fails, you can call the Char.TryParse method instead. Restituisce un Boolean valore che indica se la conversione ha avuto esito positivo o negativo.It returns a Boolean value that indicates whether the conversion succeeded or failed.
Si applica a
ToChar(Int64)
Converte il valore dell'intero con segno a 64 bit specificato nel carattere Unicode equivalente.Converts the value of the specified 64-bit signed integer to its equivalent Unicode character.
public:
static char ToChar(long value);
public static char ToChar (long value);
static member ToChar : int64 -> char
Public Shared Function ToChar (value As Long) As Char
Parametri
- value
- Int64
Intero con segno a 64 bit da convertire.The 64-bit signed integer to convert.
Restituisce
Carattere Unicode equivalente a value
.A Unicode character that is equivalent to value
.
Eccezioni
value
è minore di MinValue o maggiore di MaxValue.value
is less than MinValue or greater than MaxValue.
Esempio
Nell'esempio seguente viene effettuato un tentativo di conversione di un valore long integer in un oggetto Char e viene generata un'eccezione in caso di OverflowException errore.The following example attempts to convert a long integer to a Char, and throws a OverflowException on failure.
public:
void ConvertLongChar( Int64 longVal )
{
Char charVal = 'a';
try
{
charVal = System::Convert::ToChar( longVal );
System::Console::WriteLine( " {0} as a char is {1}",
longVal, charVal );
}
catch ( System::OverflowException^ )
{
System::Console::WriteLine( "Overflow in long-to-char conversion." );
}
// A conversion from Char to long cannot overflow.
longVal = System::Convert::ToInt64( charVal );
System::Console::WriteLine( " {0} as an Int64 is {1}",
charVal, longVal );
}
public void ConvertLongChar(long longVal) {
char charVal = 'a';
try {
charVal = System.Convert.ToChar(longVal);
System.Console.WriteLine("{0} as a char is {1}",
longVal, charVal);
}
catch (System.OverflowException) {
System.Console.WriteLine(
"Overflow in long-to-char conversion.");
}
// A conversion from Char to long cannot overflow.
longVal = System.Convert.ToInt64(charVal);
System.Console.WriteLine("{0} as an Int64 is {1}",
charVal, longVal);
}
Public Sub ConvertLongChar(ByVal longVal As Long)
Dim charVal As Char = "a"c
Try
charVal = System.Convert.ToChar(longVal)
System.Console.WriteLine("{0} as a char is {1}", _
longVal, charVal)
Catch exception As System.OverflowException
System.Console.WriteLine( _
"Overflow in Long-to-Char conversion.")
End Try
' A conversion from Char to Long cannot overflow.
longVal = System.Convert.ToInt64(charVal)
System.Console.WriteLine("{0} as a Long is {1}", _
charVal, longVal)
End Sub
Si applica a
ToChar(Int16)
Converte il valore dell'intero con segno a 16 bit specificato nel carattere Unicode equivalente.Converts the value of the specified 16-bit signed integer to its equivalent Unicode character.
public:
static char ToChar(short value);
public static char ToChar (short value);
static member ToChar : int16 -> char
Public Shared Function ToChar (value As Short) As Char
Parametri
- value
- Int16
Intero con segno a 16 bit da convertire.The 16-bit signed integer to convert.
Restituisce
Carattere Unicode equivalente a value
.A Unicode character that is equivalent to value
.
Eccezioni
Esempio
Nell'esempio seguente viene convertita una matrice di interi con segno a 16 bit in Char valori.The following example converts an array of signed 16-bit integers to Char values.
short[] numbers = { Int16.MinValue, 0, 40, 160, 255, 1028,
2011, Int16.MaxValue };
char result;
foreach (short number in numbers)
{
try {
result = Convert.ToChar(number);
Console.WriteLine("{0} converts to '{1}'.", number, result);
}
catch (OverflowException) {
Console.WriteLine("{0} is outside the range of the Char data type.",
number);
}
}
// The example displays the following output:
// -32768 is outside the range of the Char data type.
// 0 converts to ' '.
// 40 converts to '('.
// 160 converts to ' '.
// 255 converts to 'ÿ'.
// 1028 converts to '?'.
// 2011 converts to '?'.
// 32767 converts to '?'.
Dim numbers() As Short = { Int16.MinValue, 0, 40, 160, 255, 1028, _
2011, Int16.MaxValue }
Dim result As Char
For Each number As Short In numbers
Try
result = Convert.ToChar(number)
Console.WriteLine("{0} converts to '{1}'.", number, result)
Catch e As OverflowException
Console.WriteLine("{0} is outside the range of the Char data type.", _
number)
End Try
Next
' The example displays the following output:
' -32768 is outside the range of the Char data type.
' 0 converts to ' '.
' 40 converts to '('.
' 160 converts to ' '.
' 255 converts to 'ÿ'.
' 1028 converts to '?'.
' 2011 converts to '?'.
' 32767 converts to '?'.
Si applica a
ToChar(Double)
La chiamata di questo metodo genera sempre un'eccezione InvalidCastException.Calling this method always throws InvalidCastException.
public:
static char ToChar(double value);
public static char ToChar (double value);
static member ToChar : double -> char
Public Shared Function ToChar (value As Double) As Char
Parametri
- value
- Double
Numero a virgola mobile a precisione doppia da convertire.The double-precision floating-point number to convert.
Restituisce
Questa conversione non è supportata.This conversion is not supported. Non vengono restituiti valori.No value is returned.
Eccezioni
Questa conversione non è supportata.This conversion is not supported.
Si applica a
ToChar(Decimal)
La chiamata di questo metodo genera sempre un'eccezione InvalidCastException.Calling this method always throws InvalidCastException.
public:
static char ToChar(System::Decimal value);
public static char ToChar (decimal value);
static member ToChar : decimal -> char
Public Shared Function ToChar (value As Decimal) As Char
Parametri
- value
- Decimal
Numero decimale da convertire.The decimal number to convert.
Restituisce
Questa conversione non è supportata.This conversion is not supported. Non vengono restituiti valori.No value is returned.
Eccezioni
Questa conversione non è supportata.This conversion is not supported.
Esempio
Nell'esempio seguente viene effettuato un tentativo di conversione di un oggetto Decimal in Char e viene generato un InvalidCastException errore.The following example attempts to convert a Decimal to Char, and throws InvalidCastException on failure.
public:
void ConvertCharDecimal( Char charVal )
{
Decimal decimalVal = 0;
// Char to decimal conversion is not supported and will always
// throw an InvalidCastException.
try
{
decimalVal = System::Convert::ToDecimal( charVal );
}
catch ( System::InvalidCastException^ )
{
System::Console::WriteLine(
"Char-to-Decimal conversion is not supported by the .NET Framework." );
}
//Decimal to char conversion is also not supported.
try
{
charVal = System::Convert::ToChar( decimalVal );
}
catch ( System::InvalidCastException^ )
{
System::Console::WriteLine(
"Decimal-to-Char conversion is not supported by the .NET Framework." );
}
}
public void ConvertCharDecimal(char charVal) {
Decimal decimalVal = 0;
// Char to decimal conversion is not supported and will always
// throw an InvalidCastException.
try {
decimalVal = System.Convert.ToDecimal(charVal);
}
catch (System.InvalidCastException) {
System.Console.WriteLine(
"Char-to-Decimal conversion is not supported " +
"by the .NET Framework.");
}
//Decimal to char conversion is also not supported.
try {
charVal = System.Convert.ToChar(decimalVal);
}
catch (System.InvalidCastException) {
System.Console.WriteLine(
"Decimal-to-Char conversion is not supported " +
"by the .NET Framework.");
}
}
Public Sub ConvertCharDecimal(ByVal charVal As Char)
Dim decimalVal As [Decimal] = 0
' Char to decimal conversion is not supported and will always
' throw an InvalidCastException.
Try
decimalVal = System.Convert.ToDecimal(charVal)
Catch exception As System.InvalidCastException
System.Console.WriteLine( _
"Char-to-Decimal conversion is not supported " + _
"by the .NET Framework.")
End Try
'Decimal to char conversion is also not supported.
Try
charVal = System.Convert.ToChar(decimalVal)
Catch exception As System.InvalidCastException
System.Console.WriteLine( _
"Decimal-to-Char conversion is not supported " + _
"by the .NET Framework.")
End Try
End Sub
Si applica a
ToChar(DateTime)
La chiamata di questo metodo genera sempre un'eccezione InvalidCastException.Calling this method always throws InvalidCastException.
public:
static char ToChar(DateTime value);
public static char ToChar (DateTime value);
static member ToChar : DateTime -> char
Public Shared Function ToChar (value As DateTime) As Char
Parametri
- value
- DateTime
Valore di data e ora da convertire.The date and time value to convert.
Restituisce
Questa conversione non è supportata.This conversion is not supported. Non vengono restituiti valori.No value is returned.
Eccezioni
Questa conversione non è supportata.This conversion is not supported.
Si applica a
ToChar(Char)
Restituisce il valore del carattere Unicode specificato; non viene eseguita alcuna conversione effettiva.Returns the specified Unicode character value; no actual conversion is performed.
public:
static char ToChar(char value);
public static char ToChar (char value);
static member ToChar : char -> char
Public Shared Function ToChar (value As Char) As Char
Parametri
- value
- Char
Carattere Unicode da restituire.The Unicode character to return.
Restituisce
value
viene restituito invariato.value
is returned unchanged.
Si applica a
ToChar(Byte)
Converte il valore dell'intero senza segno a 8 bit specificato nel carattere Unicode equivalente.Converts the value of the specified 8-bit unsigned integer to its equivalent Unicode character.
public:
static char ToChar(System::Byte value);
public static char ToChar (byte value);
static member ToChar : byte -> char
Public Shared Function ToChar (value As Byte) As Char
Parametri
- value
- Byte
Intero senza segno a 8 bit da convertire.The 8-bit unsigned integer to convert.
Restituisce
Carattere Unicode equivalente a value
.A Unicode character that is equivalent to value
.
Esempio
Nell'esempio seguente viene convertita una matrice di byte senza segno in Char valori.The following example converts an array of unsigned bytes to Char values.
byte[] bytes = {Byte.MinValue, 40, 80, 120, 180, Byte.MaxValue};
char result;
foreach (byte number in bytes)
{
result = Convert.ToChar(number);
Console.WriteLine("{0} converts to '{1}'.", number, result);
}
// The example displays the following output:
// 0 converts to ' '.
// 40 converts to '('.
// 80 converts to 'P'.
// 120 converts to 'x'.
// 180 converts to '''.
// 255 converts to 'ÿ'.
Dim bytes() As Byte = {Byte.MinValue, 40, 80, 120, 180, Byte.MaxValue}
Dim result As Char
For Each number As Byte In bytes
result = Convert.ToChar(number)
Console.WriteLine("{0} converts to '{1}'.", number, result)
Next
' The example displays the following output:
' 0 converts to ' '.
' 40 converts to '('.
' 80 converts to 'P'.
' 120 converts to 'x'.
' 180 converts to '''.
' 255 converts to 'ÿ'.
Si applica a
ToChar(Boolean)
La chiamata di questo metodo genera sempre un'eccezione InvalidCastException.Calling this method always throws InvalidCastException.
public:
static char ToChar(bool value);
public static char ToChar (bool value);
static member ToChar : bool -> char
Public Shared Function ToChar (value As Boolean) As Char
Parametri
- value
- Boolean
Valore booleano da convertire.The Boolean value to convert.
Restituisce
Questa conversione non è supportata.This conversion is not supported. Non vengono restituiti valori.No value is returned.
Eccezioni
Questa conversione non è supportata.This conversion is not supported.
Si applica a
ToChar(Int32)
Converte il valore dell'intero con segno a 32 bit specificato nel carattere Unicode equivalente.Converts the value of the specified 32-bit signed integer to its equivalent Unicode character.
public:
static char ToChar(int value);
public static char ToChar (int value);
static member ToChar : int -> char
Public Shared Function ToChar (value As Integer) As Char
Parametri
- value
- Int32
Intero con segno a 32 bit da convertire.The 32-bit signed integer to convert.
Restituisce
Carattere Unicode equivalente a value
.A Unicode character that is equivalent to value
.
Eccezioni
value
è minore di MinValue o maggiore di MaxValue.value
is less than MinValue or greater than MaxValue.
Esempio
Nell'esempio seguente viene convertita una matrice di interi con segno in Char valori.The following example converts an array of signed integers to Char values.
int[] numbers = { -1, 0, 40, 160, 255, 1028,
2011, 30001, 207154, Int32.MaxValue };
char result;
foreach (int number in numbers)
{
try {
result = Convert.ToChar(number);
Console.WriteLine("{0} converts to '{1}'.", number, result);
}
catch (OverflowException) {
Console.WriteLine("{0} is outside the range of the Char data type.",
number);
}
}
}
// -1 is outside the range of the Char data type.
// 0 converts to ' '.
// 40 converts to '('.
// 160 converts to ' '.
// 255 converts to 'ÿ'.
// 1028 converts to '?'.
// 2011 converts to '?'.
// 30001 converts to '?'.
// 207154 is outside the range of the Char data type.
// 2147483647 is outside the range of the Char data type.
Dim numbers() As Integer = { -1, 0, 40, 160, 255, 1028, _
2011, 30001, 207154, Int32.MaxValue }
Dim result As Char
For Each number As Integer In numbers
Try
result = Convert.ToChar(number)
Console.WriteLine("{0} converts to '{1}'.", number, result)
Catch e As OverflowException
Console.WriteLine("{0} is outside the range of the Char data type.", _
number)
End Try
Next
End Sub
' -1 is outside the range of the Char data type.
' 0 converts to ' '.
' 40 converts to '('.
' 160 converts to ' '.
' 255 converts to 'ÿ'.
' 1028 converts to '?'.
' 2011 converts to '?'.
' 30001 converts to '?'.
' 207154 is outside the range of the Char data type.
' 2147483647 is outside the range of the Char data type.