Point Point Point Point Constructors

Definizione

Overload

Point(Size) Point(Size) Point(Size) Point(Size)

Inizializza una nuova istanza della classe Point da un oggetto Size.Initializes a new instance of the Point class from a Size.

Point(Int32) Point(Int32) Point(Int32) Point(Int32)

Inizializza una nuova istanza della classe Point utilizzando coordinate specificate da un valore di tipo Integer.Initializes a new instance of the Point class using coordinates specified by an integer value.

Point(Int32, Int32) Point(Int32, Int32) Point(Int32, Int32) Point(Int32, Int32)

Inizializza una nuova istanza della classe Point con le coordinate specificate.Initializes a new instance of the Point class with the specified coordinates.

Point(Size) Point(Size) Point(Size) Point(Size)

Inizializza una nuova istanza della classe Point da un oggetto Size.Initializes a new instance of the Point class from a Size.

public:
 Point(System::Drawing::Size sz);
public Point (System.Drawing.Size sz);
new System.Drawing.Point : System.Drawing.Size -> System.Drawing.Point
Public Sub New (sz As Size)

Parametri

sz
Size Size Size Size

Oggetto Size che specifica le coordinate della nuova classe Point.A Size that specifies the coordinates for the new Point.

Esempi

Esempio di codice seguente viene illustrato come utilizzare il Equality operatore e come costruire una Point da un Size o due numeri interi.The following code example demonstrates how to use the Equality operator and how to construct a Point from a Size or two integers. Viene inoltre illustrato come usare il X e Y proprietà.It also demonstrates how to use the X and Y properties. In questo esempio è progettato per essere usato con Windows Form.This example is designed to be used with Windows Forms. Incollare il codice in un form che contiene un pulsante denominato Button1e associare le Button1_Click metodo con il pulsante Click evento.Paste the code into a form that contains a button named Button1, and associate the Button1_Click method with the button's Click event.

private:
   void Button1_Click( System::Object^ /*sender*/, System::EventArgs^ /*e*/ )
   {
      // Construct a new Point with integers.
      Point Point1 = Point(100,100);

      // Create a Graphics object.
      Graphics^ formGraphics = this->CreateGraphics();

      // Construct another Point, this time using a Size.
      Point Point2 = Point(System::Drawing::Size( 100, 100 ));

      // Call the equality operator to see if the points are equal,  
      // and if so print out their x and y values.
      if ( Point1 == Point2 )
      {
         array<Object^>^temp0 = {Point1.X,Point2.X,Point1.Y,Point2.Y};
         formGraphics->DrawString( String::Format( "Point1.X: "
         "{0},Point2.X: {1}, Point1.Y: {2}, Point2.Y {3}", temp0 ), this->Font, Brushes::Black, PointF(10,70) );
      }
   }
private void Button1_Click(System.Object sender, System.EventArgs e)
{

    // Construct a new Point with integers.
    Point Point1 = new Point(100, 100);

    // Create a Graphics object.
    Graphics formGraphics = this.CreateGraphics();

    // Construct another Point, this time using a Size.
    Point Point2 = new Point(new Size(100, 100));

    // Call the equality operator to see if the points are equal,  
    // and if so print out their x and y values.
    if (Point1 == Point2)
    {
        formGraphics.DrawString(String.Format("Point1.X: " +
            "{0},Point2.X: {1}, Point1.Y: {2}, Point2.Y {3}",
            new object[]{Point1.X, Point2.X, Point1.Y, Point2.Y}),
            this.Font, Brushes.Black, new PointF(10, 70));
    }

}
Private Sub Button1_Click(ByVal sender As System.Object, _
    ByVal e As System.EventArgs) Handles Button1.Click

    ' Construct a new Point with integers.
    Dim Point1 As New Point(100, 100)

    ' Create a Graphics object.
    Dim formGraphics As Graphics = Me.CreateGraphics()

    ' Construct another Point, this time using a Size.
    Dim Point2 As New Point(New Size(100, 100))

    ' Call the equality operator to see if the points are equal,  
    ' and if so print out their x and y values.
    If (Point.op_Equality(Point1, Point2)) Then
        formGraphics.DrawString(String.Format("Point1.X: " & _
            "{0},Point2.X: {1}, Point1.Y: {2}, Point2.Y {3}", _
            New Object() {Point1.X, Point2.X, Point1.Y, Point2.Y}), _
            Me.Font, Brushes.Black, New PointF(10, 70))
    End If

End Sub

Point(Int32) Point(Int32) Point(Int32) Point(Int32)

Inizializza una nuova istanza della classe Point utilizzando coordinate specificate da un valore di tipo Integer.Initializes a new instance of the Point class using coordinates specified by an integer value.

public:
 Point(int dw);
public Point (int dw);
new System.Drawing.Point : int -> System.Drawing.Point
Public Sub New (dw As Integer)

Parametri

dw
Int32 Int32 Int32 Int32

Intero a 32 bit che specifica le coordinate del nuovo oggetto Point.A 32-bit integer that specifies the coordinates for the new Point.

Esempi

Esempio di codice seguente viene illustrato come utilizzare il Point e Size.Size costruttori e System.Drawing.ContentAlignment enumerazione.The following code example demonstrates how to use the Point and Size.Size constructors and the System.Drawing.ContentAlignment enumeration. Per eseguire questo esempio, incollare il codice in un Form Windows che contiene un'etichetta denominata Label1e chiamare il InitializeLabel1 metodo nel costruttore del form.To run this example, paste this code into a Windows Form that contains a label named Label1, and call the InitializeLabel1 method in the form's constructor.

void InitializeLabel1()
{
   // Set a border.
   Label1->BorderStyle = BorderStyle::FixedSingle;
   
   // Set the size, constructing a size from two integers.
   Label1->Size = System::Drawing::Size( 100, 50 );
   
   // Set the location, constructing a point from a 32-bit integer
   // (using hexadecimal).
   Label1->Location = Point(0x280028);
   
   // Set and align the text on the lower-right side of the label.
   Label1->TextAlign = ContentAlignment::BottomRight;
   Label1->Text = "Bottom Right Alignment";
}
private void InitializeLabel1()
{
    // Set a border.
    Label1.BorderStyle = BorderStyle.FixedSingle;

    // Set the size, constructing a size from two integers.
    Label1.Size = new Size(100, 50);

    // Set the location, constructing a point from a 32-bit integer
    // (using hexadecimal).
    Label1.Location = new Point(0x280028);

    // Set and align the text on the lower-right side of the label.
    Label1.TextAlign = ContentAlignment.BottomRight;
    Label1.Text = "Bottom Right Alignment";
}
Private Sub InitializeLabel1()

    ' Set a border.
    Label1.BorderStyle = BorderStyle.FixedSingle

    ' Set the size, constructing a size from two integers.
    Label1.Size = New Size(100, 50)

    ' Set the location, constructing a point from a 32-bit integer
    ' (using hexadecimal).
    Label1.Location = New Point(&H280028)

    ' Set and align the text on the lower-right side of the label.
    Label1.TextAlign = ContentAlignment.BottomRight
    Label1.Text = "Bottom Right Alignment"
End Sub

Commenti

I 16 bit meno significativi del dw parametro specifica la coordinata orizzontale e i 16 bit superiori specifica la coordinata y verticale per il nuovo Point.The low-order 16 bits of the dw parameter specify the horizontal x-coordinate and the higher 16 bits specify the vertical y-coordinate for the new Point.

Point(Int32, Int32) Point(Int32, Int32) Point(Int32, Int32) Point(Int32, Int32)

Inizializza una nuova istanza della classe Point con le coordinate specificate.Initializes a new instance of the Point class with the specified coordinates.

public:
 Point(int x, int y);
public Point (int x, int y);
new System.Drawing.Point : int * int -> System.Drawing.Point
Public Sub New (x As Integer, y As Integer)

Parametri

x
Int32 Int32 Int32 Int32

Posizione orizzontale del punto.The horizontal position of the point.

y
Int32 Int32 Int32 Int32

Posizione verticale del punto.The vertical position of the point.

Esempi

Esempio di codice seguente viene illustrato come utilizzare il Equality operatore e come costruire una Point da un Size o due numeri interi.The following code example demonstrates how to use the Equality operator and how to construct a Point from a Size or two integers. Viene inoltre illustrato come usare il X e Y proprietà.It also demonstrates how to use the X and Y properties. In questo esempio è progettato per essere usato con Windows Form.This example is designed to be used with Windows Forms. Incollare il codice in un form che contiene un pulsante denominato Button1e associare le Button1_Click metodo con il pulsante Click evento.Paste the code into a form that contains a button named Button1, and associate the Button1_Click method with the button's Click event.

private:
   void Button1_Click( System::Object^ /*sender*/, System::EventArgs^ /*e*/ )
   {
      // Construct a new Point with integers.
      Point Point1 = Point(100,100);

      // Create a Graphics object.
      Graphics^ formGraphics = this->CreateGraphics();

      // Construct another Point, this time using a Size.
      Point Point2 = Point(System::Drawing::Size( 100, 100 ));

      // Call the equality operator to see if the points are equal,  
      // and if so print out their x and y values.
      if ( Point1 == Point2 )
      {
         array<Object^>^temp0 = {Point1.X,Point2.X,Point1.Y,Point2.Y};
         formGraphics->DrawString( String::Format( "Point1.X: "
         "{0},Point2.X: {1}, Point1.Y: {2}, Point2.Y {3}", temp0 ), this->Font, Brushes::Black, PointF(10,70) );
      }
   }
private void Button1_Click(System.Object sender, System.EventArgs e)
{

    // Construct a new Point with integers.
    Point Point1 = new Point(100, 100);

    // Create a Graphics object.
    Graphics formGraphics = this.CreateGraphics();

    // Construct another Point, this time using a Size.
    Point Point2 = new Point(new Size(100, 100));

    // Call the equality operator to see if the points are equal,  
    // and if so print out their x and y values.
    if (Point1 == Point2)
    {
        formGraphics.DrawString(String.Format("Point1.X: " +
            "{0},Point2.X: {1}, Point1.Y: {2}, Point2.Y {3}",
            new object[]{Point1.X, Point2.X, Point1.Y, Point2.Y}),
            this.Font, Brushes.Black, new PointF(10, 70));
    }

}
Private Sub Button1_Click(ByVal sender As System.Object, _
    ByVal e As System.EventArgs) Handles Button1.Click

    ' Construct a new Point with integers.
    Dim Point1 As New Point(100, 100)

    ' Create a Graphics object.
    Dim formGraphics As Graphics = Me.CreateGraphics()

    ' Construct another Point, this time using a Size.
    Dim Point2 As New Point(New Size(100, 100))

    ' Call the equality operator to see if the points are equal,  
    ' and if so print out their x and y values.
    If (Point.op_Equality(Point1, Point2)) Then
        formGraphics.DrawString(String.Format("Point1.X: " & _
            "{0},Point2.X: {1}, Point1.Y: {2}, Point2.Y {3}", _
            New Object() {Point1.X, Point2.X, Point1.Y, Point2.Y}), _
            Me.Font, Brushes.Black, New PointF(10, 70))
    End If

End Sub

Si applica a