ExceptionHandlingClauseOptions Enumerazione

Riferimento

Definizione

Spazio dei nomi:: System.Reflection

Assembly:: System.Runtime.dll

Assembly:: mscorlib.dll

Assembly:: netstandard.dll

Importante

Alcune informazioni sono relative alla release non definitiva del prodotto, che potrebbe subire modifiche significative prima della release definitiva. Microsoft non riconosce alcuna garanzia, espressa o implicita, in merito alle informazioni qui fornite.

Identifica i tipi di clausola di gestione delle eccezioni.

Questa enumerazione supporta una combinazione bit per bit dei rispettivi valori dei membri.

public enum class ExceptionHandlingClauseOptions

[System.Flags]
public enum ExceptionHandlingClauseOptions

[System.Flags]
[System.Runtime.InteropServices.ComVisible(true)]
public enum ExceptionHandlingClauseOptions

[<System.Flags>]
type ExceptionHandlingClauseOptions =

[<System.Flags>]
[<System.Runtime.InteropServices.ComVisible(true)>]
type ExceptionHandlingClauseOptions =

Public Enum ExceptionHandlingClauseOptions

Ereditarietà: Object

ValueType

Enum
ExceptionHandlingClauseOptions

Attributi: FlagsAttribute ComVisibleAttribute

Campi

Clause	0	La clausola accetta tutte le eccezioni che derivano da un tipo specificato.
Fault	4	La clausola viene eseguita se si verifica un'eccezione ma non al termine di un normale flusso di controllo.
Filter	1	La clausola contiene istruzioni specificate dall'utente che determinano se l'eccezione deve essere ignorata (ovvero se deve essere ripresa la normale esecuzione), se deve essere gestita dal gestore associato o se deve essere passata alla clausola successiva.
Finally	2	La clausola viene eseguita ogni volta che il blocco try viene chiuso, sia in seguito al normale flusso di controllo che a causa di un'eccezione non gestita.

Esempio

Nell'esempio di codice seguente viene definito un metodo di test denominato MethodBodyExamplee vengono visualizzate le informazioni sulle variabili locali e le clausole di gestione delle eccezioni. Il MethodBase.GetMethodBody metodo viene utilizzato per ottenere un MethodBody oggetto per il metodo di test. La ExceptionHandlingClauses proprietà viene utilizzata per ottenere un elenco di ExceptionHandlingClause oggetti e visualizzare le relative proprietà.

Questo codice fa parte di un esempio più ampio fornito per la MethodBody classe .

#using <System.dll>

using namespace System;
using namespace System::Reflection;

public ref class Example
{
    // The Main method contains code to analyze this method, using
    // the properties and methods of the MethodBody class.
public:
    void MethodBodyExample(Object^ arg)
    {
        // Define some local variables. In addition to these variables,
        // the local variable list includes the variables scoped to 
        // the catch clauses.
        int var1 = 42;
        String^ var2 = "Forty-two";

        try
        {
            // Depending on the input value, throw an ArgumentException or 
            // an ArgumentNullException to test the Catch clauses.
            if (arg == nullptr)
            {
                throw gcnew ArgumentNullException("The argument cannot " +
                    "be null.");
            }
            if (arg->GetType() == String::typeid)
            {
                throw gcnew ArgumentException("The argument cannot " + 
                    "be a string.");
            }        
        }

        // There is no Filter clause in this code example. See the Visual 
        // Basic code for an example of a Filter clause.

        // This catch clause handles the ArgumentException class, and
        // any other class derived from Exception.
        catch (ArgumentException^ ex)
        {
            Console::WriteLine("Ordinary exception-handling clause caught:" +
                " {0}", ex->GetType());
        }        
        finally
        {
            var1 = 3033;
            var2 = "Another string.";
        }
    }
};

int main()
{ 
    // Get method body information.
    MethodInfo^ mi = 
        Example::typeid->GetMethod("MethodBodyExample");

    MethodBody^ mb = mi->GetMethodBody();
    Console::WriteLine("\r\nMethod: {0}", mi);

    // Display the general information included in the 
    // MethodBody object.
    Console::WriteLine("    Local variables are initialized: {0}", 
        mb->InitLocals);
    Console::WriteLine("    Maximum number of items on the operand " +
        "stack: {0}", mb->MaxStackSize);

using System;
using System.Reflection;

public class Example
{
    public static void Main()
    {
        // Get method body information.
        MethodInfo mi = typeof(Example).GetMethod("MethodBodyExample");
        MethodBody mb = mi.GetMethodBody();
        Console.WriteLine("\r\nMethod: {0}", mi);

        // Display the general information included in the
        // MethodBody object.
        Console.WriteLine("    Local variables are initialized: {0}",
            mb.InitLocals);
        Console.WriteLine("    Maximum number of items on the operand stack: {0}",
            mb.MaxStackSize);

Imports System.Reflection

Public Class Example

    Public Shared Sub Main()

        ' Demonstrate the effect of the Visual Basic When keyword, which
        ' generates a Filter clause in the Try block.
        Dim e As New Example()
        Console.WriteLine()
        e.MethodBodyExample("String argument")
        e.MethodBodyExample(Nothing)

        ' Get method body information.
        Dim mi As MethodInfo = _
            GetType(Example).GetMethod("MethodBodyExample")
        Dim mb As MethodBody = mi.GetMethodBody()
        Console.WriteLine(vbCrLf & "Method: {0}", mi)

        ' Display the general information included in the 
        ' MethodBody object.
        Console.WriteLine("    Local variables are initialized: {0}", _
            mb.InitLocals)
        Console.WriteLine("    Maximum number of items on the operand stack: {0}", _
            mb.MaxStackSize)


// Display exception handling clauses.
Console::WriteLine();
for each(ExceptionHandlingClause^ exhc in mb->ExceptionHandlingClauses)
{
    Console::WriteLine(exhc->Flags.ToString());

    // The FilterOffset property is meaningful only for Filter
    // clauses. The CatchType property is not meaningful for 
    // Filter or Finally clauses. 
    switch(exhc->Flags)
    {
    case ExceptionHandlingClauseOptions::Filter:
        Console::WriteLine("        Filter Offset: {0}", 
            exhc->FilterOffset);
        break;
    case ExceptionHandlingClauseOptions::Finally:
        break;
    default:
        Console::WriteLine("    Type of exception: {0}", 
            exhc->CatchType);
        break;
    }

    Console::WriteLine("       Handler Length: {0}",
        exhc->HandlerLength);
    Console::WriteLine("       Handler Offset: {0}", 
        exhc->HandlerOffset);
    Console::WriteLine("     Try Block Length: {0}", exhc->TryLength);
    Console::WriteLine("     Try Block Offset: {0}", exhc->TryOffset);
}


// Display exception handling clauses.
Console.WriteLine();
foreach (ExceptionHandlingClause ehc in mb.ExceptionHandlingClauses)
{
    Console.WriteLine(ehc.Flags.ToString());

    // The FilterOffset property is meaningful only for Filter
    // clauses. The CatchType property is not meaningful for
    // Filter or Finally clauses.
    switch (ehc.Flags)
    {
        case ExceptionHandlingClauseOptions.Filter:
            Console.WriteLine("        Filter Offset: {0}",
                ehc.FilterOffset);
            break;
        case ExceptionHandlingClauseOptions.Finally:
            break;
        default:
            Console.WriteLine("    Type of exception: {0}",
                ehc.CatchType);
            break;
    }

    Console.WriteLine("       Handler Length: {0}", ehc.HandlerLength);
    Console.WriteLine("       Handler Offset: {0}", ehc.HandlerOffset);
    Console.WriteLine("     Try Block Length: {0}", ehc.TryLength);
    Console.WriteLine("     Try Block Offset: {0}", ehc.TryOffset);
}


' Display exception handling clauses.
Console.WriteLine()
For Each ehc As ExceptionHandlingClause In mb.ExceptionHandlingClauses
    Console.WriteLine(ehc.Flags.ToString())

    ' The FilterOffset property is meaningful only for Filter
    ' clauses. The CatchType property is not meaningful for 
    ' Filter or Finally clauses. 
    Select Case ehc.Flags
        Case ExceptionHandlingClauseOptions.Filter
            Console.WriteLine("        Filter Offset: {0}", _
                ehc.FilterOffset)
        Case ExceptionHandlingClauseOptions.Finally
        Case Else
            Console.WriteLine("    Type of exception: {0}", _
                ehc.CatchType)
    End Select

    Console.WriteLine("       Handler Length: {0}", ehc.HandlerLength)
    Console.WriteLine("       Handler Offset: {0}", ehc.HandlerOffset)
    Console.WriteLine("     Try Block Length: {0}", ehc.TryLength)
    Console.WriteLine("     Try Block Offset: {0}", ehc.TryOffset)
Next

    // The Main method contains code to analyze this method, using
    // the properties and methods of the MethodBody class.
public:
    void MethodBodyExample(Object^ arg)
    {
        // Define some local variables. In addition to these variables,
        // the local variable list includes the variables scoped to 
        // the catch clauses.
        int var1 = 42;
        String^ var2 = "Forty-two";

        try
        {
            // Depending on the input value, throw an ArgumentException or 
            // an ArgumentNullException to test the Catch clauses.
            if (arg == nullptr)
            {
                throw gcnew ArgumentNullException("The argument cannot " +
                    "be null.");
            }
            if (arg->GetType() == String::typeid)
            {
                throw gcnew ArgumentException("The argument cannot " + 
                    "be a string.");
            }        
        }

        // There is no Filter clause in this code example. See the Visual 
        // Basic code for an example of a Filter clause.

        // This catch clause handles the ArgumentException class, and
        // any other class derived from Exception.
        catch (ArgumentException^ ex)
        {
            Console::WriteLine("Ordinary exception-handling clause caught:" +
                " {0}", ex->GetType());
        }        
        finally
        {
            var1 = 3033;
            var2 = "Another string.";
        }
    }

    }

    // The Main method contains code to analyze this method, using
    // the properties and methods of the MethodBody class.
    public void MethodBodyExample(object arg)
    {
        // Define some local variables. In addition to these variables,
        // the local variable list includes the variables scoped to
        // the catch clauses.
        int var1 = 42;
        string var2 = "Forty-two";

        try
        {
            // Depending on the input value, throw an ArgumentException or
            // an ArgumentNullException to test the Catch clauses.
            if (arg == null)
            {
                throw new ArgumentNullException("The argument cannot be null.");
            }
            if (arg.GetType() == typeof(string))
            {
                throw new ArgumentException("The argument cannot be a string.");
            }
        }

        // This filter clause selects only exceptions that derive
        // from the ArgumentException class.
        // Other exceptions, including ArgumentException itself,
        // are not handled by this filter clause.
        catch (ArgumentException ex) when (ex.GetType().IsSubclassOf(typeof(ArgumentException)))
        {
            Console.WriteLine("Filter clause caught: {0}", ex.GetType());
        }

        // This catch clause handles the ArgumentException class, and
        // any other class derived from Exception.
        catch(Exception ex)
        {
            Console.WriteLine("Ordinary exception-handling clause caught: {0}",
                ex.GetType());
        }
        finally
        {
            var1 = 3033;
            var2 = "Another string.";
        }
    }
}

// This code example produces output similar to the following:
//
//Method: Void MethodBodyExample(System.Object)
//    Local variables are initialized: True
//    Maximum number of items on the operand stack: 2

    End Sub

    ' This test method is executed at the beginning of Main, to show
    ' how the Filter clause works. The Filter clause is generated by 
    ' a Visual Basic When expression. If arg is Nothing, this method
    ' throws ArgumentNullException, which is caught by the filter
    ' clause. If arg is a string, the method throws ArgumentException,
    ' which does not match the filter clause.
    '
    ' Sub Main also contains code to analyze this method, using 
    ' the properties and methods of the MethodBody class.
    Public Sub MethodBodyExample(ByVal arg As Object)

        ' Define some local variables. In addition to these variables,
        ' the local variable list includes the variables scoped to 
        ' the catch clauses.
        Dim var1 As Integer = 42
        Dim var2 As String = "Forty-two"

        Try
            ' Depending on the input value, throw an ArgumentException or 
            ' an ArgumentNullException to test the Catch clauses.
            '
            If arg Is Nothing Then
                Throw New ArgumentNullException("The argument cannot be Nothing.")
            End If
            If arg.GetType() Is GetType(String) Then
                Throw New ArgumentException("The argument cannot be a string.")
            End If
        
        ' The When expression makes this a filter clause. The expression 
        ' selects only exceptions that derive from the ArgumentException
        ' class. Other exceptions, including ArgumentException itself, 
        ' are not handled by this filter clause.
        Catch ex As ArgumentException _
            When ex.GetType().IsSubclassOf(GetType(ArgumentException))

            Console.WriteLine("Filter clause caught: {0}", ex.GetType())
        
        ' This catch clause handles the ArgumentException class, and
        ' any other class derived from Exception.
        Catch ex As Exception
            Console.WriteLine("Ordinary exception-handling clause caught: {0}", _
                ex.GetType())

        Finally
            var1 = 3033
            var2 = "Another string."
        End Try
    End Sub
End Class

' This code example produces output similar to the following:
'
'Ordinary exception-handling clause caught: System.ArgumentException
'Filter clause caught: System.ArgumentNullException
'
'Method: Void MethodBodyExample(System.Object)
'    Local variables are initialized: True
'    Maximum number of items on the operand stack: 3

//Clause
//    Type of exception: System.ArgumentException
//       Handler Length: 29
//       Handler Offset: 78
//     Try Block Length: 65
//     Try Block Offset: 13
//Finally
//       Handler Length: 13
//       Handler Offset: 113
//     Try Block Length: 100
//     Try Block Offset: 13

//
//Filter
//      Filter Offset: 71
//      Handler Length: 23
//      Handler Offset: 116
//      Try Block Length: 61
//      Try Block Offset: 10
//Clause
//    Type of exception: System.Exception
//       Handler Length: 21
//       Handler Offset: 70
//     Try Block Length: 61
//     Try Block Offset: 9
//Finally
//       Handler Length: 14
//       Handler Offset: 94
//     Try Block Length: 85
//     Try Block Offset: 9

'
'Filter
'        Filter Offset: 0
'       Handler Length: 19
'       Handler Offset: 99
'     Try Block Length: 45
'     Try Block Offset: 9
'Clause
'    Type of exception: System.Exception
'       Handler Length: 25
'       Handler Offset: 118
'     Try Block Length: 45
'     Try Block Offset: 9
'Finally
'       Handler Length: 13
'       Handler Offset: 153
'     Try Block Length: 144
'     Try Block Offset: 9

Commenti

Per esaminare le clausole di gestione delle eccezioni in un metodo, ottenere un MethodInfo oggetto e chiamare il GetMethodBody metodo per ottenere il corpo del metodo. Utilizzare la ExceptionHandlingClauses proprietà per ottenere un elenco di ExceptionHandlingClause oggetti .

Nota

L'uso delle clausole di gestione delle eccezioni richiede una conoscenza approfondita dei metadati e dei formati di istruzioni MSIL (Microsoft Intermediate Language). Le informazioni sono disponibili nella documentazione di Common Language Infrastructure (CLI), in particolare "Partition II: Metadata Definition and Semantics".

Si applica a