String.CompareTo String.CompareTo String.CompareTo String.CompareTo Method

Definizione

Confronta questa istanza con String o un oggetto specificato e restituisce un intero che indica se questa istanza precede, segue o si trova nella stessa posizione di String o dell'oggetto specificato nell'ordinamento.Compares this instance with a specified object or String and returns an integer that indicates whether this instance precedes, follows, or appears in the same position in the sort order as the specified object or String.

Overload

CompareTo(Object) CompareTo(Object) CompareTo(Object) CompareTo(Object)

Confronta questa istanza con un oggetto Object specificato e indica se questa istanza precede, segue o si trova nella stessa posizione dell'oggetto Object specificato all'interno dell'ordinamento.Compares this instance with a specified Object and indicates whether this instance precedes, follows, or appears in the same position in the sort order as the specified Object.

CompareTo(String) CompareTo(String) CompareTo(String) CompareTo(String)

Confronta questa istanza con un oggetto String specificato e indica se questa istanza precede, segue o si trova nella stessa posizione della stringa specificata all'interno dei criteri di ordinamento.Compares this instance with a specified String object and indicates whether this instance precedes, follows, or appears in the same position in the sort order as the specified string.

Commenti

Entrambi gli overload del metodo eseguono CompareTo un confronto con distinzione delle impostazioni cultura e con distinzione tra maiuscole e minuscole.Both overloads of the CompareTo method perform culture-sensitive and case-sensitive comparison. Non è possibile utilizzare questo metodo per eseguire confronti senza distinzione tra le impostazioni cultura o ordinali.You cannot use this method to perform culture-insensitive or ordinal comparisons. Per maggiore chiarezza del codice, è consigliabile evitare il CompareTo metodo e chiamare invece Compare il metodo.For code clarity, we recommend that you avoid the CompareTo method and call the Compare method instead.

CompareTo(Object) CompareTo(Object) CompareTo(Object) CompareTo(Object)

Confronta questa istanza con un oggetto Object specificato e indica se questa istanza precede, segue o si trova nella stessa posizione dell'oggetto Object specificato all'interno dell'ordinamento.Compares this instance with a specified Object and indicates whether this instance precedes, follows, or appears in the same position in the sort order as the specified Object.

public:
 virtual int CompareTo(System::Object ^ value);
public int CompareTo (object value);
abstract member CompareTo : obj -> int
override this.CompareTo : obj -> int
Public Function CompareTo (value As Object) As Integer

Parametri

value
Object Object Object Object

Oggetto che restituisce un oggetto String.An object that evaluates to a String.

Restituisce

Intero con segno a 32 bit che indica se questa istanza precede, segue o si trova nella stessa posizione del parametro value nell'ordinamento.A 32-bit signed integer that indicates whether this instance precedes, follows, or appears in the same position in the sort order as the value parameter.

ValueValue CondizioneCondition
Minore di zeroLess than zero Questa istanza precede value.This instance precedes value.
ZeroZero Questa istanza si trova nella stessa posizione di value nell'ordinamento.This instance has the same position in the sort order as value.
Maggiore di zeroGreater than zero L'istanza segue value.This instance follows value. -oppure--or- value è null.value is null.

Implementazioni

Eccezioni

Esempi

Nell'esempio seguente viene usato CompareTo il metodo con Objectun oggetto.The following example uses the CompareTo method with an Object. Poiché tenta di confrontare un' String istanza di con un TestClass oggetto, il metodo genera un' ArgumentExceptioneccezione.Because it attempts to compare a String instance to a TestClass object, the method throws an ArgumentException.

using namespace System;

public ref class TestClass{};

int main()
{
   TestClass^ test = gcnew TestClass;
   array<Object^>^ objectsToCompare = { test, test->ToString(), 123,
                                        (123).ToString(), "some text",
                                        "Some Text" };
   String^ s = "some text";
   for each (Object^ objectToCompare in objectsToCompare) {
      try {
         Int32 i = s->CompareTo(objectToCompare);
         Console::WriteLine("Comparing '{0}' with '{1}': {2}",
                            s, objectToCompare, i);
      }
      catch (ArgumentException^ e) {
         Console::WriteLine("Bad argument: {0} (type {1})",
                            objectToCompare,
                            objectToCompare->GetType()->Name);
      }
   }
}
// The example displays the following output:
//    Bad argument: TestClass (type TestClass)
//    Comparing 'some text' with 'TestClass': -1
//    Bad argument: 123 (type Int32)
//    Comparing 'some text' with '123': 1
//    Comparing 'some text' with 'some text': 0
//    Comparing 'some text' with 'Some Text': -1
using System;

public class TestClass
{}

public class Example 
{
   public static void Main()
   {
      var test = new TestClass();
      Object[] objectsToCompare = { test, test.ToString(), 123,
                                    123.ToString(), "some text",
                                    "Some Text" };
      string s = "some text";
      foreach (var objectToCompare in objectsToCompare) {
         try {
            int i = s.CompareTo(objectToCompare);
            Console.WriteLine("Comparing '{0}' with '{1}': {2}",
                              s, objectToCompare, i);
         }
         catch (ArgumentException) {
            Console.WriteLine("Bad argument: {0} (type {1})",
                              objectToCompare,
                              objectToCompare.GetType().Name);
         }
      }
   }
}
// The example displays the following output:
//    Bad argument: TestClass (type TestClass)
//    Comparing 'some text' with 'TestClass': -1
//    Bad argument: 123 (type Int32)
//    Comparing 'some text' with '123': 1
//    Comparing 'some text' with 'some text': 0
//    Comparing 'some text' with 'Some Text': -1
Public Class TestClass
End Class 


Public Class Example
   Public Shared Sub Main()
      Dim test As New TestClass()
      Dim objectsToCompare() As Object = { test, test.ToString(), 123,
                                           123.ToString(), "some text",
                                           "Some Text" }
      Dim s As String = "some text"
      For Each objectToCompare In objectsToCompare
         Try
            Dim i As Integer = s.CompareTo(objectToCompare)
            Console.WriteLine("Comparing '{0}' with '{1}': {2}",
                              s, objectToCompare, i)
         Catch e As ArgumentException
            Console.WriteLine("Bad argument: {0} (type {1})",
                              objectToCompare,
                              objectToCompare.GetType().Name)
         End Try
      Next
   End Sub 
End Class 
' The example displays the following output:
'       Bad argument: TestClass (type TestClass)
'       Comparing 'some text' with 'TestClass': -1
'       Bad argument: 123 (type Int32)
'       Comparing 'some text' with '123': 1
'       Comparing 'some text' with 'some text': 0
'       Comparing 'some text' with 'Some Text': -1

Commenti

valuedeve essere un String oggetto.value must be a String object.

Attenzione

Il CompareTo metodo è stato progettato principalmente per l'utilizzo in operazioni di ordinamento o anche.The CompareTo method was designed primarily for use in sorting or alphabetizing operations. Non deve essere usato quando lo scopo principale della chiamata al metodo è determinare se due stringhe sono equivalenti.It should not be used when the primary purpose of the method call is to determine whether two strings are equivalent. Per determinare se due stringhe sono equivalenti, chiamare Equals il metodo.To determine whether two strings are equivalent, call the Equals method.

Questo metodo esegue un confronto di Word (con distinzione tra maiuscole e minuscole e con distinzione delle impostazioni cultura) utilizzando le impostazioni cultura correnti.This method performs a word (case-sensitive and culture-sensitive) comparison using the current culture. Per ulteriori informazioni sugli ordinamenti di Word, stringa e ordinali System.Globalization.CompareOptions, vedere.For more information about word, string, and ordinal sorts, see System.Globalization.CompareOptions.

Per ulteriori informazioni sul comportamento di questo metodo, vedere la sezione Osservazioni del String.Compare(String, String) metodo.For more information about the behavior of this method, see the Remarks section of the String.Compare(String, String) method.

Note per i chiamanti

I set di caratteri includono caratteri ignorabili.Character sets include ignorable characters. Il CompareTo(Object) metodo non considera tali caratteri quando esegue un confronto con distinzione delle impostazioni cultura.The CompareTo(Object) method does not consider such characters when it performs a culture-sensitive comparison. Se, ad esempio, il codice seguente viene eseguito in .NET Framework 4.NET Framework 4 o versioni successive, un confronto tra "Animal" e "Ani-mal" (usando un trattino morbido o U + 00AD) indica che le due stringhe sono equivalenti.For example, if the following code is run on the .NET Framework 4.NET Framework 4 or later, a comparison of "animal" with "ani-mal" (using a soft hyphen, or U+00AD) indicates that the two strings are equivalent.

[!code-csharpSystem.String.CompareTo#1] [!code-vbSystem.String.CompareTo#1][!code-csharpSystem.String.CompareTo#1] [!code-vbSystem.String.CompareTo#1] Per riconoscere i caratteri ignorabili in un confronto tra stringhe, CompareOrdinal(String, String) chiamare il metodo.To recognize ignorable characters in a string comparison, call the CompareOrdinal(String, String) method.

Vedi anche

CompareTo(String) CompareTo(String) CompareTo(String) CompareTo(String)

Confronta questa istanza con un oggetto String specificato e indica se questa istanza precede, segue o si trova nella stessa posizione della stringa specificata all'interno dei criteri di ordinamento.Compares this instance with a specified String object and indicates whether this instance precedes, follows, or appears in the same position in the sort order as the specified string.

public:
 int CompareTo(System::String ^ strB);
public int CompareTo (string strB);
member this.CompareTo : string -> int
Public Function CompareTo (strB As String) As Integer

Parametri

strB
String String String String

Stringa da confrontare con questa istanza.The string to compare with this instance.

Restituisce

Intero con segno a 32 bit che indica se questa istanza precede, segue o si trova nella stessa posizione del parametro strB nell'ordinamento.A 32-bit signed integer that indicates whether this instance precedes, follows, or appears in the same position in the sort order as the strB parameter.

ValueValue CondizioneCondition
Minore di zeroLess than zero Questa istanza precede strB.This instance precedes strB.
ZeroZero Questa istanza si trova nella stessa posizione di strB nell'ordinamento.This instance has the same position in the sort order as strB.
Maggiore di zeroGreater than zero L'istanza segue strB.This instance follows strB. In alternativa-or- strB è null.strB is null.

Implementazioni

Esempi

Nell'esempio seguente viene usato CompareTo il metodo per confrontare l'istanza di stringa corrente con un'altra stringa.The following example uses the CompareTo method to compare the current string instance with another string.

using namespace System;

String^ CompareStrings(String^ str1, String^ str2)
{
   // compare the values, using the CompareTo method on the first string
   int cmpVal = str1->CompareTo(str2);
   if (cmpVal == 0)
      // the values are the same
      return "The strings occur in the same position in the sort order.";
   else if (cmpVal < 0)
      return "The first string precedes the second in the sort order.";
   else
      return "The first string follows the second in the sort order.";
}

int main()
{
   String^ strFirst = "Goodbye";
   String^ strSecond = "Hello";
   String^ strThird = "a small String*";
   String^ strFourth = "goodbye";
   
   // Compare a string to itself.
   Console::WriteLine(CompareStrings(strFirst, strFirst));
   Console::WriteLine(CompareStrings(strFirst, strSecond));
   Console::WriteLine(CompareStrings(strFirst, strThird));
   
   // Compare a string to another string that varies only by case.
   Console::WriteLine(CompareStrings(strFirst, strFourth));
   Console::WriteLine(CompareStrings(strFourth, strFirst));
}
// The example displays the following output:
//       The strings occur in the same position in the sort order.
//       The first string precedes the second in the sort order.
//       The first string follows the second in the sort order.
//       The first string follows the second in the sort order.
//       The first string precedes the second in the sort order.
using System;

public class Example
{
   public static void Main()
   {
      string strFirst = "Goodbye";
      string strSecond = "Hello";
      string strThird = "a small string";
      string strFourth = "goodbye";

      // Compare a string to itself.
      Console.WriteLine(CompareStrings(strFirst, strFirst));

      Console.WriteLine(CompareStrings(strFirst, strSecond));
      Console.WriteLine(CompareStrings(strFirst, strThird));

      // Compare a string to another string that varies only by case.
      Console.WriteLine(CompareStrings(strFirst, strFourth));
      Console.WriteLine(CompareStrings(strFourth, strFirst));
   }

   private static string CompareStrings( string str1, string str2 )
   {
      // Compare the values, using the CompareTo method on the first string.
      int cmpVal = str1.CompareTo(str2);

       if (cmpVal == 0) // The strings are the same.
         return "The strings occur in the same position in the sort order.";
      else if (cmpVal < 0)
         return "The first string precedes the second in the sort order.";
      else
         return "The first string follows the second in the sort order.";
    }
}
// The example displays the following output:
//       The strings occur in the same position in the sort order.
//       The first string precedes the second in the sort order.
//       The first string follows the second in the sort order.
//       The first string follows the second in the sort order.
//       The first string precedes the second in the sort order.
Public Module Example
   Public Sub Main()
      Dim strFirst As String = "Goodbye"
      Dim strSecond As String = "Hello"
      Dim strThird As String = "a small string"
      Dim strFourth As String = "goodbye"

      ' Compare a string to itself.
      Console.WriteLine(CompareStrings(strFirst, strFirst))
        
      Console.WriteLine(CompareStrings(strFirst, strSecond))
      Console.WriteLine(CompareStrings(strFirst, strThird))
        
      ' Compare a string to another string that varies only by case.
      Console.WriteLine(CompareStrings(strFirst, strFourth))
      Console.WriteLine(CompareStrings(strFourth, strFirst))
   End Sub
    
   Private Function CompareStrings(str1 As String, str2 As String) As String
      Dim cmpVal As Integer = str1.CompareTo(str2)
      If cmpVal = 0 Then
         ' The values are the same.
         Return "The strings occur in the same position in the sort order."
      ElseIf cmpVal < 0 Then
         Return "The first string precedes the second in the sort order."
      Else
         Return "The first string follows the second in the sort order."
      End If
   End Function
End Module
' This example displays the following output:
'       The strings occur in the same position in the sort order.
'       The strings occur in the same position in the sort order.
'       The first string precedes the second in the sort order.
'       The first string follows the second in the sort order.
'       The first string follows the second in the sort order.
'       The first string precedes the second in the sort order.

Nell'esempio seguente vengono illustrate le versioni generiche e non generiche del metodo CompareTo per diversi tipi di valore e di riferimento.The following example demonstrates generic and non-generic versions of the CompareTo method for several value and reference types.

// This example demonstrates the two versions of the 
// CompareTo method for several base types.
// The general version takes a parameter of type Object, while the specific
// version takes a type-specific parameter, such as Boolean, Int32, or Double.
using namespace System;

void Show( String^ caption, Object^ var1, Object^ var2, int resultGeneric, int resultNonGeneric )
{
   String^ relation;
   Console::Write( caption );
   if ( resultGeneric == resultNonGeneric )
   {
      if ( resultGeneric < 0 )
            relation = "less than";
      else
      if ( resultGeneric > 0 )
            relation = "greater than";
      else
            relation = "equal to";
      Console::WriteLine( "{0} is {1} {2}", var1, relation, var2 );
   }
   // The following condition will never occur because the generic and non-generic
   // CompareTo methods are equivalent.
   else
   {
      Console::WriteLine( "Generic CompareTo = {0}; non-generic CompareTo = {1}", resultGeneric, resultNonGeneric );
   }
}

int main()
{
   String^ nl = Environment::NewLine;
   String^ msg = "{0}The following is the result of using the generic and non-generic{0}"
   "versions of the CompareTo method for several base types:{0}";
   Object^ obj; // An Object used to insure CompareTo(Object) is called.

   DateTime now = DateTime::Now;
   
   // Time span = 11 days, 22 hours, 33 minutes, 44 seconds
   TimeSpan tsX = TimeSpan(11,22,33,44);
   
   // Version = 1.2.333.4
   Version^ versX = gcnew Version(  "1.2.333.4" );
   
   // Guid = CA761232-ED42-11CE-BACD-00AA0057B223
   Guid guidX = Guid( "{CA761232-ED42-11CE-BACD-00AA0057B223}");
   Boolean a1 = true,a2 = true;
   Byte b1 = 1,b2 = 1;
   Int16 c1 = -2,c2 = 2;
   Int32 d1 = 3,d2 = 3;
   Int64 e1 = 4,e2 = -4;
   Decimal f1 = Decimal(-5.5), f2 = Decimal(5.5);
   Single g1 = 6.6f,g2 = 6.6f;
   Double h1 = 7.7,h2 = -7.7;
   Char i1 = 'A',i2 = 'A';
   String^ j1 = "abc", ^j2 = "abc";
   DateTime k1 = now,k2 = now;
   TimeSpan l1 = tsX,l2 = tsX;
   Version^ m1 = versX, ^m2 = gcnew Version(  "2.0" );
   Guid n1 = guidX,n2 = guidX;
   
   // The following types are not CLS-compliant.
   SByte w1 = 8,w2 = 8;
   UInt16 x1 = 9,x2 = 9;
   UInt32 y1 = 10,y2 = 10;
   UInt64 z1 = 11,z2 = 11;
   
   //
   Console::WriteLine( msg, nl );
   try
   {
      Show( "Boolean: ", a1, a2, a1.CompareTo( a2 ), a1.CompareTo( a2 ) );
      Show( "Byte:    ", b1, b2, b1.CompareTo( b2 ), b1.CompareTo( b2 ) );
      Show( "Int16:   ", c1, c2, c1.CompareTo( c2 ), c1.CompareTo( c2 ) );
      Show( "Int32:   ", d1, d2, d1.CompareTo( d2 ), d1.CompareTo( d2 ) );
      Show( "Int64:   ", e1, e2, e1.CompareTo( e2 ), e1.CompareTo( e2 ) );
      Show( "Decimal: ", f1, f2, f1.CompareTo( f2 ), f1.CompareTo( f2 ) );
      Show( "Single:  ", g1, g2, g1.CompareTo( g2 ), g1.CompareTo( g2 ) );
      Show( "Double:  ", h1, h2, h1.CompareTo( h2 ), h1.CompareTo( h2 ) );
      Show( "Char:    ", i1, i2, i1.CompareTo( i2 ), i1.CompareTo( i2 ) );
      
      // Use an anonymous object to hide the String object.
      obj = j2;
      Show( "String:  ", j1, j2, j1->CompareTo( j2 ), j1->CompareTo( obj ) );
      Show( "DateTime:", k1, k2, k1.CompareTo( k2 ), k1.CompareTo( k2 ) );
      Show(  "TimeSpan: ", l1, l2, l1.CompareTo( l2 ), l1.CompareTo( l2 ) );
      
      // Use an anonymous object to hide the Version object.
      obj = m2;
      Show(  "Version:  ", m1, m2, m1->CompareTo( m2 ), m1->CompareTo( obj ) );
      Show(  "Guid:     ", n1, n2, n1.CompareTo( n2 ), n1.CompareTo( n2 ) );
      
      //
      Console::WriteLine( "{0}The following types are not CLS-compliant:", nl );
      Show( "SByte:   ", w1, w2, w1.CompareTo( w2 ), w1.CompareTo( w2 ) );
      Show( "UInt16:  ", x1, x2, x1.CompareTo( x2 ), x1.CompareTo( x2 ) );
      Show( "UInt32:  ", y1, y2, y1.CompareTo( y2 ), y1.CompareTo( y2 ) );
      Show( "UInt64:  ", z1, z2, z1.CompareTo( z2 ), z1.CompareTo( z2 ) );
   }
   catch ( Exception^ e ) 
   {
      Console::WriteLine( e );
   }

}
//     This example displays the following output:
//     
//     The following is the result of using the generic and non-generic versions of the
//     CompareTo method for several base types:
//     
//     Boolean:  True is equal to True
//     Byte:     1 is equal to 1
//     Int16:    -2 is less than 2
//     Int32:    3 is equal to 3
//     Int64:    4 is greater than -4
//     Decimal:  -5.5 is less than 5.5
//     Single:   6.6 is equal to 6.6
//     Double:   7.7 is greater than -7.7
//     Char:     A is equal to A
//     String:   abc is equal to abc
//     DateTime: 12/1/2003 5:37:46 PM is equal to 12/1/2003 5:37:46 PM
//     TimeSpan: 11.22:33:44 is equal to 11.22:33:44
//     Version:  1.2.333.4 is less than 2.0
//     Guid:     ca761232-ed42-11ce-bacd-00aa0057b223 is equal to ca761232-ed42-11ce-bacd-00
//     aa0057b223
//     
//     The following types are not CLS-compliant:
//     SByte:    8 is equal to 8
//     UInt16:   9 is equal to 9
//     UInt32:   10 is equal to 10
//     UInt64:   11 is equal to 11
// This example demonstrates the generic and non-generic versions of the 
// CompareTo method for several base types.
// The non-generic version takes a parameter of type Object, while the generic
// version takes a type-specific parameter, such as Boolean, Int32, or Double.

using System;

class Sample 
{
    public static void Main() 
    {
    string    nl = Environment.NewLine;
    string    msg = "{0}The following is the result of using the generic and non-generic{0}" +
                    "versions of the CompareTo method for several base types:{0}";

    DateTime  now = DateTime.Now;
// Time span = 11 days, 22 hours, 33 minutes, 44 seconds
    TimeSpan  tsX = new TimeSpan(11, 22, 33, 44); 
// Version = 1.2.333.4
    Version   versX = new Version("1.2.333.4");  
// Guid = CA761232-ED42-11CE-BACD-00AA0057B223
    Guid      guidX = new Guid("{CA761232-ED42-11CE-BACD-00AA0057B223}");

    Boolean  a1 = true,  a2 = true;
    Byte     b1 = 1,     b2 = 1;
    Int16    c1 = -2,    c2 = 2;
    Int32    d1 = 3,     d2 = 3;
    Int64    e1 = 4,     e2 = -4;
    Decimal  f1 = -5.5m, f2 = 5.5m;
    Single   g1 = 6.6f,  g2 = 6.6f;
    Double   h1 = 7.7d,  h2 = -7.7d;
    Char     i1 = 'A',   i2 = 'A';
    String   j1 = "abc", j2 = "abc";
    DateTime k1 = now,   k2 = now;
    TimeSpan l1 = tsX,   l2 = tsX;
    Version  m1 = versX, m2 = new Version("2.0");
    Guid     n1 = guidX, n2 = guidX;

// The following types are not CLS-compliant.
    SByte    w1 = 8,     w2 = 8;
    UInt16   x1 = 9,     x2 = 9;
    UInt32   y1 = 10,    y2 = 10;
    UInt64   z1 = 11,    z2 = 11;
//
    Console.WriteLine(msg, nl);
    try 
        {
// The second and third Show method call parameters are automatically boxed because
// the second and third Show method declaration arguments expect type Object.

        Show("Boolean:  ", a1, a2, a1.CompareTo(a2), a1.CompareTo((Object)a2));
        Show("Byte:     ", b1, b2, b1.CompareTo(b2), b1.CompareTo((Object)b2));
        Show("Int16:    ", c1, c2, c1.CompareTo(c2), c1.CompareTo((Object)c2));
        Show("Int32:    ", d1, d2, d1.CompareTo(d2), d1.CompareTo((Object)d2));
        Show("Int64:    ", e1, e2, e1.CompareTo(e2), e1.CompareTo((Object)e2));
        Show("Decimal:  ", f1, f2, f1.CompareTo(f2), f1.CompareTo((Object)f2));
        Show("Single:   ", g1, g2, g1.CompareTo(g2), g1.CompareTo((Object)g2));
        Show("Double:   ", h1, h2, h1.CompareTo(h2), h1.CompareTo((Object)h2));
        Show("Char:     ", i1, i2, i1.CompareTo(i2), i1.CompareTo((Object)i2));
        Show("String:   ", j1, j2, j1.CompareTo(j2), j1.CompareTo((Object)j2));
        Show("DateTime: ", k1, k2, k1.CompareTo(k2), k1.CompareTo((Object)k2));
        Show("TimeSpan: ", l1, l2, l1.CompareTo(l2), l1.CompareTo((Object)l2));
        Show("Version:  ", m1, m2, m1.CompareTo(m2), m1.CompareTo((Object)m2));
        Show("Guid:     ", n1, n2, n1.CompareTo(n2), n1.CompareTo((Object)n2));
//
        Console.WriteLine("{0}The following types are not CLS-compliant:", nl);
        Show("SByte:    ", w1, w2, w1.CompareTo(w2), w1.CompareTo((Object)w2));
        Show("UInt16:   ", x1, x2, x1.CompareTo(x2), x1.CompareTo((Object)x2));
        Show("UInt32:   ", y1, y2, y1.CompareTo(y2), y1.CompareTo((Object)y2));
        Show("UInt64:   ", z1, z2, z1.CompareTo(z2), z1.CompareTo((Object)z2));
        }
    catch (Exception e)
        {
        Console.WriteLine(e);
        }
    }

    public static void Show(string caption, Object var1, Object var2, 
                            int resultGeneric, int resultNonGeneric)
    {
    string relation;

    Console.Write(caption);
    if (resultGeneric == resultNonGeneric) 
        {
        if      (resultGeneric < 0) relation = "less than";
        else if (resultGeneric > 0) relation = "greater than";
        else                        relation = "equal to";
        Console.WriteLine("{0} is {1} {2}", var1, relation, var2);
        }

// The following condition will never occur because the generic and non-generic
// CompareTo methods are equivalent.

    else
        {
        Console.WriteLine("Generic CompareTo = {0}; non-generic CompareTo = {1}", 
                           resultGeneric, resultNonGeneric);
        }
   }
}
/*
This example produces the following results:

The following is the result of using the generic and non-generic versions of the
CompareTo method for several base types:

Boolean:  True is equal to True
Byte:     1 is equal to 1
Int16:    -2 is less than 2
Int32:    3 is equal to 3
Int64:    4 is greater than -4
Decimal:  -5.5 is less than 5.5
Single:   6.6 is equal to 6.6
Double:   7.7 is greater than -7.7
Char:     A is equal to A
String:   abc is equal to abc
DateTime: 12/1/2003 5:37:46 PM is equal to 12/1/2003 5:37:46 PM
TimeSpan: 11.22:33:44 is equal to 11.22:33:44
Version:  1.2.333.4 is less than 2.0
Guid:     ca761232-ed42-11ce-bacd-00aa0057b223 is equal to ca761232-ed42-11ce-bacd-00
aa0057b223

The following types are not CLS-compliant:
SByte:    8 is equal to 8
UInt16:   9 is equal to 9
UInt32:   10 is equal to 10
UInt64:   11 is equal to 11
*/
' This example demonstrates the generic and non-generic versions of the 
' CompareTo method for several base types.
' The non-generic version takes a parameter of type Object, while the generic
' version takes a type-specific parameter, such as Boolean, Int32, or Double.

Class Sample
   Public Shared Sub Main()
      Dim nl As String = Environment.NewLine
      Dim msg As String = _
          "{0}The following is the result of using the generic and non-generic{0}" & _
          "versions of the CompareTo method for several base types:{0}"
      
      Dim now As DateTime = DateTime.Now
      ' Time span = 11 days, 22 hours, 33 minutes, 44 seconds
      Dim tsX As New TimeSpan(11, 22, 33, 44)
      ' Version = 1.2.333.4
      Dim versX As New Version("1.2.333.4")
      ' Guid = CA761232-ED42-11CE-BACD-00AA0057B223
      Dim guidX As New Guid("{CA761232-ED42-11CE-BACD-00AA0057B223}")
      
      Dim a1 As [Boolean] = True,    a2 As [Boolean] = True
      Dim b1 As [Byte] = 1,          b2 As [Byte] = 1
      Dim c1 As Int16 = -2,          c2 As Int16 = 2
      Dim d1 As Int32 = 3,           d2 As Int32 = 3
      Dim e1 As Int64 = 4,           e2 As Int64 = -4
      Dim f1 As [Decimal] = -5.5D,   f2 As [Decimal] = 5.5D
      Dim g1 As [Single] = 6.6F,     g2 As [Single] = 6.6F
      Dim h1 As [Double] = 7.7,      h2 As [Double] = -7.7
      Dim i1 As [Char] = "A"c,       i2 As [Char] = "A"c
      Dim j1 As String = "abc",      j2 As String = "abc"
      Dim k1 As DateTime = now,      k2 As DateTime = now
      Dim l1 As TimeSpan = tsX,      l2 As TimeSpan = tsX
      Dim m1 As Version = versX,     m2 As New Version("2.0")
      Dim n1 As Guid = guidX,        n2 As Guid = guidX
      
      ' The following types are not CLS-compliant.
      ' SByte, UInt16, UInt32, UInt64

      Console.WriteLine(msg, nl)
      Try
         ' The second and third Show method call parameters are automatically boxed because
         ' the second and third Show method declaration arguments expect type Object.

         Show("Boolean:  ", a1, a2, a1.CompareTo(a2), a1.CompareTo(CObj(a2)))
         Show("Byte:     ", b1, b2, b1.CompareTo(b2), b1.CompareTo(CObj(b2)))
         Show("Int16:    ", c1, c2, c1.CompareTo(c2), c1.CompareTo(CObj(c2)))
         Show("Int32:    ", d1, d2, d1.CompareTo(d2), d1.CompareTo(CObj(d2)))
         Show("Int64:    ", e1, e2, e1.CompareTo(e2), e1.CompareTo(CObj(e2)))
         Show("Decimal:  ", f1, f2, f1.CompareTo(f2), f1.CompareTo(CObj(f2)))
         Show("Single:   ", g1, g2, g1.CompareTo(g2), g1.CompareTo(CObj(g2)))
         Show("Double:   ", h1, h2, h1.CompareTo(h2), h1.CompareTo(CObj(h2)))
         Show("Char:     ", i1, i2, i1.CompareTo(i2), i1.CompareTo(CObj(i2)))
         Show("String:   ", j1, j2, j1.CompareTo(j2), j1.CompareTo(CObj(j2)))
         Show("DateTime: ", k1, k2, k1.CompareTo(k2), k1.CompareTo(CObj(k2)))
         Show("TimeSpan: ", l1, l2, l1.CompareTo(l2), l1.CompareTo(CObj(l2)))
         Show("Version:  ", m1, m2, m1.CompareTo(m2), m1.CompareTo(CObj(m2)))
         Show("Guid:     ", n1, n2, n1.CompareTo(n2), n1.CompareTo(CObj(n2)))
         '
         Console.WriteLine("{0}The following types are not CLS-compliant:", nl)
         Console.WriteLine("SByte, UInt16, UInt32, UInt64")

      Catch e As Exception
         Console.WriteLine(e)
      End Try
   End Sub
   
   Public Shared Sub Show(caption As String, var1 As [Object], var2 As [Object], _
                          resultGeneric As Integer, resultNonGeneric As Integer)
      Dim relation As String
      
      Console.Write(caption)
      If resultGeneric = resultNonGeneric Then
         If resultGeneric < 0 Then
            relation = "less than"
         ElseIf resultGeneric > 0 Then
            relation = "greater than"
         Else
            relation = "equal to"
         End If
         Console.WriteLine("{0} is {1} {2}", var1, relation, var2)
      
      ' The following condition will never occur because the generic and non-generic
      ' CompareTo methods are equivalent.

      Else
         Console.WriteLine("Generic CompareTo = {0}; non-generic CompareTo = {1}", _
                            resultGeneric, resultNonGeneric)
      End If
   End Sub
End Class
'
'This example produces the following results:
'
'The following is the result of using the generic and non-generic versions of the
'CompareTo method for several base types:
'
'Boolean:  True is equal to True
'Byte:     1 is equal to 1
'Int16:    -2 is less than 2
'Int32:    3 is equal to 3
'Int64:    4 is greater than -4
'Decimal:  -5.5 is less than 5.5
'Single:   6.6 is equal to 6.6
'Double:   7.7 is greater than -7.7
'Char:     A is equal to A
'String:   abc is equal to abc
'DateTime: 12/1/2003 5:37:46 PM is equal to 12/1/2003 5:37:46 PM
'TimeSpan: 11.22:33:44 is equal to 11.22:33:44
'Version:  1.2.333.4 is less than 2.0
'Guid:     ca761232-ed42-11ce-bacd-00aa0057b223 is equal to ca761232-ed42-11ce-bacd-00
'aa0057b223
'
'The following types are not CLS-compliant:
'SByte, UInt16, UInt32, UInt64
'

Commenti

Questo metodo esegue un confronto di Word (con distinzione tra maiuscole e minuscole e con distinzione delle impostazioni cultura) utilizzando le impostazioni cultura correnti.This method performs a word (case-sensitive and culture-sensitive) comparison using the current culture. Per ulteriori informazioni sugli ordinamenti di Word, stringa e ordinali System.Globalization.CompareOptions, vedere.For more information about word, string, and ordinal sorts, see System.Globalization.CompareOptions.

Attenzione

Il CompareTo metodo è stato progettato principalmente per l'utilizzo in operazioni di ordinamento o anche.The CompareTo method was designed primarily for use in sorting or alphabetizing operations. Non deve essere usato quando lo scopo principale della chiamata al metodo è determinare se due stringhe sono equivalenti.It should not be used when the primary purpose of the method call is to determine whether two strings are equivalent. Per determinare se due stringhe sono equivalenti, chiamare Equals il metodo.To determine whether two strings are equivalent, call the Equals method.

Per ulteriori informazioni sul comportamento di questo metodo, vedere la sezione Osservazioni del Compare(String, String) metodo.For more information about the behavior of this method, see the Remarks section of the Compare(String, String) method.

Questo metodo implementa l' System.IComparable<T> interfaccia e offre prestazioni leggermente migliori rispetto String.CompareTo(Object) al metodo, perché non è necessario determinare se l' strB argomento è un tipo di valore modificabile che deve essere sottoposto a Boxing e non deve eseguire il cast della relativa proprietà parametro da un Object oggetto a Stringun oggetto.This method implements the System.IComparable<T> interface and performs slightly better than the String.CompareTo(Object) method, because it does not have to determine whether the strB argument is a mutable value type that must be boxed, and it does not have to cast its parameter from an Object to a String.

Note per i chiamanti

I set di caratteri includono caratteri ignorabili.Character sets include ignorable characters. Il CompareTo(String) metodo non considera tali caratteri quando esegue un confronto con distinzione delle impostazioni cultura.The CompareTo(String) method does not consider such characters when it performs a culture-sensitive comparison. Se, ad esempio, il codice seguente viene eseguito in .NET Framework 4.NET Framework 4 o versioni successive, un confronto tra "Animal" e "Ani-mal" (usando un trattino morbido o U + 00AD) indica che le due stringhe sono equivalenti.For example, if the following code is run on the .NET Framework 4.NET Framework 4 or later, a comparison of "animal" with "ani-mal" (using a soft hyphen, or U+00AD) indicates that the two strings are equivalent.

[!code-csharpSystem.String.CompareTo#2] [!code-vbSystem.String.CompareTo#2][!code-csharpSystem.String.CompareTo#2] [!code-vbSystem.String.CompareTo#2] Per riconoscere i caratteri ignorabili in un confronto tra stringhe, CompareOrdinal(String, String) chiamare il metodo.To recognize ignorable characters in a string comparison, call the CompareOrdinal(String, String) method.

Vedi anche

Si applica a