ValueType Classe

Definizione

Fornisce la classe base per i tipi di valore.

public ref class ValueType abstract
public abstract class ValueType
[System.Serializable]
public abstract class ValueType
[System.Serializable]
[System.Runtime.InteropServices.ComVisible(true)]
public abstract class ValueType
type ValueType = class
[<System.Serializable>]
type ValueType = class
[<System.Serializable>]
[<System.Runtime.InteropServices.ComVisible(true)>]
type ValueType = class
Public MustInherit Class ValueType
Ereditarietà
ValueType
Derivato
Attributi

Commenti

ValueType esegue l'override dei metodi virtuali da Object con implementazioni più appropriate per i tipi di valore. Vedere anche Enum, che eredita da ValueType.

I tipi di dati sono separati in tipi di valore e tipi di riferimento. I tipi di valore sono allocati o allocati inline in una struttura. I tipi di riferimento sono allocati dall'heap. Entrambi i tipi di riferimento e valore sono derivati dalla classe Objectbase finale . Nei casi in cui è necessario che un tipo di valore si comporta come un oggetto, un wrapper che rende il tipo di valore simile a un oggetto riferimento viene allocato nell'heap e il valore del tipo di valore viene copiato in esso. Il wrapper è contrassegnato in modo che il sistema sappia che contiene un tipo di valore. Questo processo è noto come boxing e il processo inverso è noto come unboxing. Boxing e unboxing consentono a qualsiasi tipo di essere considerato come oggetto.

Anche se ValueType è la classe di base implicita per i tipi di valore, non è possibile creare una classe che eredita direttamente.ValueType I singoli compilatori forniscono invece una parola chiave del linguaggio o un costrutto (ad esempio struct in C# e Structure...End Structure in Visual Basic) per supportare la creazione di tipi di valore.

Oltre a servire come classe di base per i tipi di valore in .NET Framework, la ValueType struttura in genere non viene usata direttamente nel codice. Tuttavia, può essere usato come parametro nelle chiamate al metodo per limitare gli argomenti possibili ai tipi di valore anziché a tutti gli oggetti oppure per consentire a un metodo di gestire un numero di tipi di valore diversi. Nell'esempio seguente viene illustrato come ValueType impedire che i tipi di riferimento vengano passati ai metodi. Definisce una classe denominata Utility che contiene quattro metodi: IsNumeric, che indica se l'argomento è un numero; , che indica se l'argomento è un numero intero; IsIntegerIsFloat, che indica se l'argomento è un numero a virgola mobile e Compare, che indica la relazione tra due valori numerici. In ogni caso, i parametri del metodo sono di tipo ValueTypee i tipi di riferimento non vengono passati ai metodi.

using System;
using System.Numerics;

public class Utility
{
   public enum NumericRelationship {
      GreaterThan = 1, 
      EqualTo = 0,
      LessThan = -1
   };
   
   public static NumericRelationship Compare(ValueType value1, ValueType value2)
   {
      if (! IsNumeric(value1)) 
         throw new ArgumentException("value1 is not a number.");
      else if (! IsNumeric(value2))
         throw new ArgumentException("value2 is not a number.");

      // Use BigInteger as common integral type
      if (IsInteger(value1) && IsInteger(value2)) {
         BigInteger bigint1 = (BigInteger) value1;
         BigInteger bigint2 = (BigInteger) value2;
         return (NumericRelationship) BigInteger.Compare(bigint1, bigint2);
      }
      // At least one value is floating point; use Double.
      else {
         Double dbl1 = 0;
         Double dbl2 = 0;
         try {
            dbl1 = Convert.ToDouble(value1);
         }
         catch (OverflowException) {
            Console.WriteLine("value1 is outside the range of a Double.");
         }
         try {
            dbl2 = Convert.ToDouble(value2);
         }
         catch (OverflowException) {
            Console.WriteLine("value2 is outside the range of a Double.");
         }
         return (NumericRelationship) dbl1.CompareTo(dbl2);
      }
   }
   
   public static bool IsInteger(ValueType value)
   {         
      return (value is SByte || value is Int16 || value is Int32 
              || value is Int64 || value is Byte || value is UInt16  
              || value is UInt32 || value is UInt64 
              || value is BigInteger); 
   }

   public static bool IsFloat(ValueType value) 
   {         
      return (value is float || value is double || value is Decimal);
   }

   public static bool IsNumeric(ValueType value)
   {
      return (value is Byte ||
              value is Int16 ||
              value is Int32 ||
              value is Int64 ||
              value is SByte ||
              value is UInt16 ||
              value is UInt32 ||
              value is UInt64 ||
              value is BigInteger ||
              value is Decimal ||
              value is Double ||
              value is Single);
   }
}
open System
open System.Numerics

module Utility =
    type NumericRelationship =
        | GreaterThan = 1 
        | EqualTo = 0
        | LessThan = -1
   
    let isInteger (value: ValueType) =
        match value with
        | :? sbyte | :? int16 | :? int32 | :? int64 
        | :? byte | :? uint16  | :? uint32 
        | :? uint64 | :? bigint -> true
        | _ -> false

    let isFloat (value: ValueType) = 
        match value with
        | :? float32 | :? float | :? decimal -> true
        | _ -> false

    let tryToBigInt (value: ValueType) =
        match value with
        | :? sbyte as v -> bigint v |> Some
        | :? int16 as v -> bigint v |> Some
        | :? int32 as v -> bigint v |> Some
        | :? int64 as v -> bigint v |> Some
        | :? byte as v -> bigint v |> Some
        | :? uint16 as v -> bigint v |> Some
        | :? uint32 as v -> bigint v |> Some
        | :? uint64 as v -> bigint v |> Some
        | :? float32 as v -> bigint v |> Some
        | _ -> None

    let isNumeric (value: ValueType) =
        isInteger value || isFloat value

    let compare (value1: ValueType) (value2: ValueType) =
        if isNumeric value1 |> not then
            invalidArg "value1" "value1 is not a number."
        elif isNumeric value2 |> not then
            invalidArg "value2" "value2 is not a number."

        // Use BigInteger as common integral type
        match tryToBigInt value1, tryToBigInt value2 with
        | Some bigint1, Some bigint2 ->
            BigInteger.Compare(bigint1, bigint2) |> enum<NumericRelationship>

        // At least one value is floating point use Double.
        | _ ->
            let dbl1 = 
                try
                    Convert.ToDouble value1
                with
                | :? OverflowException ->
                    printfn "value1 is outside the range of a Double."
                    0.
                | _ -> 0.

            let dbl2 = 
                try
                    Convert.ToDouble value2
                with
                | :? OverflowException ->
                    printfn "value2 is outside the range of a Double."
                    0.
                | _ -> 0.
                
            dbl1.CompareTo dbl2 |> enum<NumericRelationship>
Imports System.Numerics

Public Class Utility
   Public Enum NumericRelationship As Integer
      GreaterThan = 1
      EqualTo = 0
      LessThan = -1
   End Enum
      
   Public Shared Function Compare(value1 As ValueType, value2 As ValueType) _
                                  As NumericRelationship
      If Not IsNumeric(value1) Then 
         Throw New ArgumentException("value1 is not a number.")
      Else If Not IsNumeric(value2) Then
         Throw New ArgumentException("value2 is not a number.")
      Else
         ' Use BigInteger as common integral type
         If isInteger(value1) And IsInteger(value2) Then
            Dim bigint1 As BigInteger = CType(value1, BigInteger)
            Dim bigInt2 As BigInteger = CType(value2, BigInteger)
            Return CType(BigInteger.Compare(bigint1, bigint2), NumericRelationship)
         ' At least one value is floating point; use Double.
         Else   
            Dim dbl1, dbl2 As Double
            Try
               dbl1 = CDbl(value1)
            Catch e As OverflowException
               Console.WriteLine("value1 is outside the range of a Double.")
            End Try
               
            Try
               dbl2 = CDbl(value2)
            Catch e As OverflowException
               Console.WriteLine("value2 is outside the range of a Double.")
            End Try
            Return CType(dbl1.CompareTo(dbl2), NumericRelationship)
         End If
      End If
   End Function
   
   Public Shared Function IsInteger(value As ValueType) As Boolean         
      Return (TypeOf value Is SByte Or TypeOf value Is Int16 Or TypeOf value Is Int32 _
                 Or TypeOf value Is Int64 Or TypeOf value Is Byte Or TypeOf value Is UInt16 _ 
                 Or TypeOf value Is UInt32 Or TypeOf value Is UInt64 _
                 Or TypeOf value Is BigInteger) 
   End Function

   Public Shared Function IsFloat(value As ValueType) As Boolean         
      Return (TypeOf value Is Single Or TypeOf value Is Double Or TypeOf value Is Decimal)
   End Function

   Public Shared Function IsNumeric(value As ValueType) As Boolean
      Return TypeOf value Is Byte OrElse
         TypeOf value Is Int16 OrElse
         TypeOf value Is Int32 OrElse
         TypeOf value Is Int64 OrElse
         TypeOf value Is SByte OrElse
         TypeOf value Is UInt16 OrElse
         TypeOf value Is UInt32 OrElse
         TypeOf value Is UInt64 OrElse
         TypeOf value Is BigInteger OrElse
         TypeOf value Is Decimal OrElse
         TypeOf value Is Double OrElse
         TypeOf value Is Single
   End Function
End Class

Nell'esempio seguente vengono illustrate le chiamate ai metodi della Utility classe.

public class Example
{
   public static void Main()
   {
      Console.WriteLine(Utility.IsNumeric(12));
      Console.WriteLine(Utility.IsNumeric(true));
      Console.WriteLine(Utility.IsNumeric('c'));
      Console.WriteLine(Utility.IsNumeric(new DateTime(2012, 1, 1)));
      Console.WriteLine(Utility.IsInteger(12.2));
      Console.WriteLine(Utility.IsInteger(123456789));
      Console.WriteLine(Utility.IsFloat(true));
      Console.WriteLine(Utility.IsFloat(12.2));
      Console.WriteLine(Utility.IsFloat(12));
      Console.WriteLine("{0} {1} {2}", 12.1, Utility.Compare(12.1, 12), 12);
   }
}
// The example displays the following output:
//       True
//       False
//       False
//       False
//       False
//       True
//       False
//       True
//       False
//       12.1 GreaterThan 12
printfn $"{Utility.isNumeric 12}"
printfn $"{Utility.isNumeric true}"
printfn $"{Utility.isNumeric 'c'}"
printfn $"{Utility.isNumeric (DateTime(2012, 1, 1))}"
printfn $"{Utility.isInteger 12.2}"
printfn $"{Utility.isInteger 123456789}"
printfn $"{Utility.isFloat true}"
printfn $"{Utility.isFloat 12.2}"
printfn $"{Utility.isFloat 12}"
printfn $"{12.1} {Utility.compare 12.1 12} {12}"
// The example displays the following output:
//       True
//       False
//       False
//       False
//       False
//       True
//       False
//       True
//       False
//       12.1 GreaterThan 12
Module Example
   Public Sub Main()
      Console.WriteLine(Utility.IsNumeric(12))
      Console.WriteLine(Utility.IsNumeric(True))
      Console.WriteLine(Utility.IsNumeric("c"c))
      Console.WriteLine(Utility.IsNumeric(#01/01/2012#))
      Console.WriteLine(Utility.IsInteger(12.2))
      Console.WriteLine(Utility.IsInteger(123456789))
      Console.WriteLine(Utility.IsFloat(True))
      Console.WriteLine(Utility.IsFloat(12.2))
      Console.WriteLine(Utility.IsFloat(12))
      Console.WriteLine("{0} {1} {2}", 12.1, Utility.Compare(12.1, 12), 12)
   End Sub
End Module
' The example displays the following output:
'       True
'       False
'       False
'       False
'       False
'       True
'       False
'       True
'       False
'       12.1 GreaterThan 12

Costruttori

ValueType()

Inizializza una nuova istanza della classe ValueType.

Metodi

Equals(Object)

Indica se questa istanza e un oggetto specificato sono uguali.

GetHashCode()

Restituisce il codice hash per l'istanza.

GetType()

Ottiene l'oggetto Type dell'istanza corrente.

(Ereditato da Object)
MemberwiseClone()

Crea una copia superficiale dell'oggetto Object corrente.

(Ereditato da Object)
ToString()

Restituisce il nome completo del tipo di questa istanza.

Si applica a

Vedi anche