Azure DevOps Services | Azure DevOps Server 2020 | Azure DevOps Server 2019 | TFS 2018 | TFS 2017
Check the (availability note) to ensure compatibility.
Upstream sources enable you to use a single feed to store both the packages you produce and the packages you consume from "remote feeds": both public feeds (for example, npmjs.com, NuGet.org, Maven Central, and PyPI) and authenticated feeds (that is, other Azure DevOps Services feeds in your organization or in organizations in your Azure Active Directory (Azure AD) tenant). Once you've enabled an upstream source, any user connected to your feed can install a package from the remote feed, and your feed will save a copy.
Already familiar with the concepts and want to jump right in? Start with these how-tos:
- How-to: Set up upstream sources
- Use nuget.org as an upstream
- Use npmjs.com as an upstream
- Use Maven Central as an upstream
Custom upstream sources are currently only supported for npm.
Benefits of upstream sources
Upstream sources enable you to manage all of your product's dependencies in a single feed. We recommend publishing all of the packages for a given product to that product's feed, and managing that product's dependencies from remote feeds in the same feed, via upstream sources. This setup has a few benefits:
- Simplicity: your NuGet.config, .npmrc, or settings.xml contains exactly one feed (your feed).
- Determinism: your feed resolves package requests in order, so rebuilding the same codebase at the same commit or changeset uses the same set of packages
- Provenance: your feed knows the provenance of packages it saved via upstream sources, so you can verify that you're using the original package, not a custom, or malicious copy published to your feed
- Peace of mind: packages used via upstream sources are guaranteed to be saved in the feed on first use; if the upstream source is disabled/removed, or the remote feed goes down or deletes a package you depend on, you can continue to develop and build
Best practices: feed consumers
To take full advantage of the benefits of upstream sources as a consumer of another feed, consider applying the following best practices to your project.
Use a single feed on the client
In order for your feed to provide deterministic restore, it's important to ensure that your package feed configuration file—your .npmrc or nuget.config references only your Azure Artifacts feed with upstream sources enabled. For NuGet, the
<packageSources> section should look like:
<packageSources> <clear /> <add key="FabrikamFiber" value="https://pkgs.dev.azure.com/fabrikam/_packaging/FabrikamFiber/nuget/v3/index.json" /> </packageSources>
<clear /> tag is required because NuGet composes several configuration files to determine the full set of options to use.
<clear /> tells NuGet to ignore all other
<packageSources> defined in higher-level configuration files.
For npm, you should have only one
registry line, like:
Order your upstream sources intentionally
If you only use public upstream sources (for example, nuget.org or npmjs.com), the order of your upstream sources is irrelevant. Requests to the feed will follow the search order.
If you use multiple Azure DevOps Services upstream sources, or a mixture of public and Azure DevOps Services upstream sources, their order is taken into account in step 3 of the search order. In that case, we recommend putting the public upstream sources first. This ensures that you look for OSS packages from the public repos before checking any Azure DevOps Services upstream sources, which could contain modified versions of public packages.
In rare cases, some organizations choose to modify OSS packages to fix security issues, to add functionality, or to satisfy requirements that the package is built from scratch internally, rather than consumed directly from the public repository. If your organization does this, put the Azure DevOps Services upstream source that contains these modified OSS packages before the public upstream sources to ensure you use your organization's modified versions.
Use the suggested default view
Upstream sources to Azure DevOps Services feeds require you to select a view of the remote feed when you add it as an upstream source. This prevents your upstream sources from creating a cycle, and it requires and encourages your upstream feed to provide you with a complete package graph. In general, the feed owner should select the correct default view, as the view communicates which packages and versions the producer wants consumers to use.
Best practices: feed owners/package producers
To make your feed easily usable as an upstream source to other feeds, consider applying the following best practices to your feed.
When in doubt,
@local is your default view
If you don't use views, the
@local view should be your default view (and is the default view on all newly created feeds). @local contains all packages uploaded/pushed/published to the feed from a package client (for example, nuget.exe) and all packages saved from any upstream source. @local, like all views, does not include packages that are available in the feed's upstream sources but have never been saved into the feed.
If you do use views to communicate a release quality, you can set the default view to whichever view contains the packages you want to make available to your consumers.
Provide a complete graph
Because your consumers require a complete graph to successfully install and consume your package, you should ensure that your default view contains one. This is most easily done by connecting to the feed's default view (NuGet, npm) and installing the package you wish to share. You may need to do this once connected to the feed (instead of the feed@view). If the package installs correctly while you're connected to the default view, all of its dependencies are in the view.
Determining the package to use: search order
For package managers that support multiple feeds (like NuGet and Maven), the order in which feeds are consulted is sometimes unclear or non-deterministic (for example in NuGet, parallel requests are made to all feeds in the config file and the first response wins). Upstream sources prevent this non-determinism by searching the feed and its upstream sources using the following order:
- Packages pushed to the feed
- Packages saved via an upstream source
- Packages available via upstream sources: each upstream is searched in the order it's listed in the feed's configuration
To take advantage of the determinism provided by upstream sources, you should ensure that your client's configuration file only references your product feed, and not any other feeds like the public sources.
Saving packages from upstream sources: continuity
When you enable an upstream source, packages installed from the upstream source via the feed will automatically be saved in the feed. These packages could be installed directly from the upstream (for example,
npm install express) or they could be installed as part of dependency resolution (for example, the install of
express would also save dependencies like
Saving can improve download performance and save network bandwidth, esp. for TFS servers located on internal networks.
Overriding a package from an upstream source
You can't publish any package-version that already exists in any upstream source enabled on your feed. For instance, if the nuget.org upstream source is enabled you cannot publish
Newtonsoft.Json 10.0.3 because that same package-version is already present on nuget.org.
If you must push a package-version that already exists on one of your upstream sources, you must disable the upstream source, push your package, then re-enable the upstream source. Note that you can only push a package-version that wasn't previously saved from the upstream, because saved packages remain in the feed even if the upstream source is disabled or removed. See the immutability doc for more info.
Metadata cached from upstream sources
When you configure an upstream source and begin to query it through your feed, the feed will keep a cache of the metadata that you queried (most often, the package you asked for and its available versions) for 24 hours. There is a 3-6 hour delay between when a package is pushed to an upstream source and when it is available for download by your feed. This delay depends on job timing and package data propagation.
To force a refresh on the cached version of your package, use the NuGet - download package HTTP request with a
HEAD call instead of
If a feed has failing upstream sources, the metadata no longer can be refreshed for packages of the same protocol. Follow the steps below to view the health status of the upstream source:
With your feed selected, select the gear icon to access your Feed settings, then select Upstream sources in your feed settings UI.
If there are any failing upstream sources, the Artifacts UI shows a warning message to notify that issues have been detected and manual action may be needed. Upstream setting page will show which one of the upstream sources is failing and by clicking the failing source, users can find the reason for the failure and instructions on how to solve it.
Offline upstream sources
Upstream sources protect you and your CI/CD infrastructure from outages in public sources. That protection works for both short and long outages.
For outages lasting less than 12 hours, you can continue to use the feed as normal thanks to the metadata cache.
For outages lasting more than 12 hours, which are infrequent, you will experience issues listing and restoring packages, even if those packages have been installed into the feed. In these scenarios, you can delete either the offline upstream or all upstream sources of the affected package type and continue developing and building as normal. If/when the upstream source returns, just re-add it.
Legacy upstream source information
Older Azure Artifacts feeds ("legacy feeds") use an older version of the npmjs.com upstream source and are also unable to use the nuget.org upstream source.