StringFormat.SetMeasurableCharacterRanges(CharacterRange[]) StringFormat.SetMeasurableCharacterRanges(CharacterRange[]) StringFormat.SetMeasurableCharacterRanges(CharacterRange[]) StringFormat.SetMeasurableCharacterRanges(CharacterRange[]) Method

定義

MeasureCharacterRanges(String, Font, RectangleF, StringFormat) メソッドを呼び出したときに計測される、文字の範囲を表す CharacterRange 構造体の配列を指定します。Specifies an array of CharacterRange structures that represent the ranges of characters measured by a call to the MeasureCharacterRanges(String, Font, RectangleF, StringFormat) method.

public:
 void SetMeasurableCharacterRanges(cli::array <System::Drawing::CharacterRange> ^ ranges);
public void SetMeasurableCharacterRanges (System.Drawing.CharacterRange[] ranges);
member this.SetMeasurableCharacterRanges : System.Drawing.CharacterRange[] -> unit
Public Sub SetMeasurableCharacterRanges (ranges As CharacterRange())

パラメーター

ranges
CharacterRange[]

MeasureCharacterRanges(String, Font, RectangleF, StringFormat) メソッドを呼び出したときに計測される、文字の範囲を表す CharacterRange 構造体の配列。An array of CharacterRange structures that specifies the ranges of characters measured by a call to the MeasureCharacterRanges(String, Font, RectangleF, StringFormat) method.

例外

32 文字を超える文字範囲が設定されています。More than 32 character ranges are set.

次の例は、Windows フォームで使用するように設計さPaintEventArgsれています。これはPaint 、イベントハンドラーのパラメーターであるを必要eとします。The following example is designed for use with Windows Forms, and it requires PaintEventArgse, which is a parameter of the Paint event handler. コードは、次のアクションを実行します。The code performs the following actions:

  • の文字範囲を設定しStringFormatます。Sets the character ranges of the StringFormat.

  • 指定された文字列およびレイアウト四角形の文字範囲を測定します。Measures the character ranges for a given string and layout rectangle.

  • 文字列とレイアウトの四角形を描画します。Draws the string and layout rectangle.

  • 領域を描画します。Paints the regions. Regionは、文字の範囲によって占有される領域を指定します。Each Region specifies an area that is occupied by a range of characters. 領域内の値は、文字範囲がMeasureCharacterRangesメソッドによって測定されるときに設定されます。The values in the regions are set when the character ranges are measured by the MeasureCharacterRanges method.

  • 最初の4つの手順を繰り返しますが、各文字範囲の測定値には末尾のスペースが含まれます。Repeats the first four steps, but includes trailing spaces in the measurement of each character range.

  • の書式設定フラグをクリアStringFormatして、末尾のスペースが各文字範囲の測定に含まれないようにします。Clears the format flags of the StringFormat so that trailing spaces are not included in the measurement of each character range.

  • 最初の4つの手順を繰り返しますが、レイアウトの四角形が文字範囲の測定に影響することを示すために、別のレイアウトの四角形を使用します。Repeats the first four steps, but uses a different layout rectangle just to demonstrate that the layout rectangle affects the measurements of the character ranges. フォントのサイズも測定値に影響を与えます。The size of the font will also affect the measurement.

void SetMeasCharRangesExample( PaintEventArgs^ e )
{
   Graphics^ g = e->Graphics;
   SolidBrush^ redBrush = gcnew SolidBrush( Color::FromArgb( 50, 255, 0, 0 ) );

   // Layout rectangles, font, and string format used for displaying string.
   Rectangle layoutRectA = Rectangle(20,20,165,80);
   Rectangle layoutRectB = Rectangle(20,110,165,80);
   Rectangle layoutRectC = Rectangle(20,200,240,80);
   System::Drawing::Font^ tnrFont = gcnew System::Drawing::Font( "Times New Roman",16 );
   StringFormat^ strFormat = gcnew StringFormat;

   // Ranges of character positions within a string.
   array<CharacterRange>^ charRanges = {CharacterRange(3,5),CharacterRange(15,2),CharacterRange(30,15)};

   // Each region specifies the area occupied by the characters within a
   // range of positions. the values are obtained by using a method that
   // measures the character ranges.
   array<System::Drawing::Region^>^charRegions = gcnew array<System::Drawing::Region^>(charRanges->Length);

   // String to be displayed.
   String^ str = "The quick, brown fox easily jumps over the lazy dog.";

   // Set the char ranges for the string format.
   strFormat->SetMeasurableCharacterRanges( charRanges );

   // loop counter (unsigned 8-bit integer)
   Byte i;

   // Measure the char ranges for a given string and layout rectangle. Each
   // area occupied by the characters in a range is stored as a region. Then
   // draw the string and layout rectangle, and paint the regions.
   charRegions = g->MeasureCharacterRanges( str, tnrFont, layoutRectA, strFormat );
   g->DrawString( str, tnrFont, Brushes::Blue, layoutRectA, strFormat );
   g->DrawRectangle( Pens::Black, layoutRectA );

   // Paint the regions.
   for ( i = 0; i < charRegions->Length; i++ )
      g->FillRegion( redBrush, charRegions[ i ] );

   // Repeat the above steps, but include trailing spaces in the char
   // range measurement by setting the appropriate string format flag.
   strFormat->FormatFlags = StringFormatFlags::MeasureTrailingSpaces;
   charRegions = g->MeasureCharacterRanges( str, tnrFont, layoutRectB, strFormat );
   g->DrawString( str, tnrFont, Brushes::Blue, layoutRectB, strFormat );
   g->DrawRectangle( Pens::Black, layoutRectB );
   for ( i = 0; i < charRegions->Length; i++ )
      g->FillRegion( redBrush, charRegions[ i ] );

   // Clear all the format flags.
   strFormat->FormatFlags = StringFormatFlags(0);

   // Repeat the steps, but use a different layout rectangle. the dimensions
   // of the layout rectangle and the size of the font both affect the
   // character range measurement.
   charRegions = g->MeasureCharacterRanges( str, tnrFont, layoutRectC, strFormat );
   g->DrawString( str, tnrFont, Brushes::Blue, layoutRectC, strFormat );
   g->DrawRectangle( Pens::Black, layoutRectC );

   // Paint the regions.
   for ( i = 0; i < charRegions->Length; i++ )
      g->FillRegion( redBrush, charRegions[ i ] );
}
public void SetMeasCharRangesExample(PaintEventArgs e)
{
    Graphics     g = e.Graphics;
    SolidBrush   redBrush = new SolidBrush(Color.FromArgb(50, 255, 0, 0));
             
    // Layout rectangles, font, and string format used for displaying string.
    Rectangle    layoutRectA = new Rectangle(20, 20, 165, 80);
    Rectangle    layoutRectB = new Rectangle(20, 110, 165, 80);
    Rectangle    layoutRectC = new Rectangle(20, 200, 240, 80);
    Font         tnrFont = new Font("Times New Roman", 16);
    StringFormat strFormat = new StringFormat();
             
    // Ranges of character positions within a string.
    CharacterRange[] charRanges = { new CharacterRange(3, 5),
        new CharacterRange(15, 2), new CharacterRange(30, 15)};
             
    // Each region specifies the area occupied by the characters within a
    // range of positions. the values are obtained by using a method that
    // measures the character ranges.
    Region[]     charRegions = new Region[charRanges.Length];
             
    // String to be displayed.
    string  str =
        "The quick, brown fox easily jumps over the lazy dog.";
             
    // Set the char ranges for the string format.
    strFormat.SetMeasurableCharacterRanges(charRanges);
   
    // loop counter (unsigned 8-bit integer)
    byte  i;    
   
    // Measure the char ranges for a given string and layout rectangle. Each
    // area occupied by the characters in a range is stored as a region. Then
    // draw the string and layout rectangle, and paint the regions.
    charRegions = g.MeasureCharacterRanges(str, tnrFont,
        layoutRectA, strFormat);
   g.DrawString(str, tnrFont, Brushes.Blue, layoutRectA, strFormat);
    g.DrawRectangle(Pens.Black, layoutRectA);
     
    // Paint the regions.
    for (i = 0; i < charRegions.Length; i++)
        g.FillRegion(redBrush, charRegions[i]);   
   
             
    // Repeat the above steps, but include trailing spaces in the char
    // range measurement by setting the appropriate string format flag.
    strFormat.FormatFlags = StringFormatFlags.MeasureTrailingSpaces;
    charRegions = g.MeasureCharacterRanges(str, tnrFont,
        layoutRectB, strFormat);
    g.DrawString(str, tnrFont, Brushes.Blue, layoutRectB, strFormat);
    g.DrawRectangle(Pens.Black, layoutRectB);
     
    
    for (i = 0; i < charRegions.Length; i++)
        g.FillRegion(redBrush, charRegions[i]);   
   
    // Clear all the format flags.
    strFormat.FormatFlags = 0;                   
 
    // Repeat the steps, but use a different layout rectangle. the dimensions
    // of the layout rectangle and the size of the font both affect the
    // character range measurement.
    charRegions = g.MeasureCharacterRanges(str, tnrFont,
        layoutRectC, strFormat);
    g.DrawString(str, tnrFont, Brushes.Blue, layoutRectC, strFormat);
    g.DrawRectangle(Pens.Black, layoutRectC);
    
    // Paint the regions.
    for (i = 0; i < charRegions.Length; i++)
        g.FillRegion(redBrush, charRegions[i]);   
    
}
Public Sub SetMeasCharRangesExample(ByVal e As PaintEventArgs)
    Dim g As Graphics = e.Graphics
    Dim redBrush As New SolidBrush(Color.FromArgb(50, 255, 0, 0))

    ' Layout rectangles, font, and string format used for
    ' displaying string.
    Dim layoutRectA As New Rectangle(20, 20, 165, 80)
    Dim layoutRectB As New Rectangle(20, 110, 165, 80)
    Dim layoutRectC As New Rectangle(20, 200, 240, 80)
    Dim tnrFont As New Font("Times New Roman", 16)
    Dim strFormat As New StringFormat

    ' Ranges of character positions within a string.
    Dim charRanges As CharacterRange() = {New CharacterRange(3, 5), _
    New CharacterRange(15, 2), New CharacterRange(30, 15)}

    ' Each region specifies the area occupied by the characters within
    ' a range of positions. The values are obtained by using a method
    ' that measures the character ranges.
    Dim charRegions(charRanges.Length) As [Region]

    ' String to be displayed.
    Dim str As String = _
    "The quick, brown fox easily jumps over the lazy dog."

    ' Set the char ranges for the string format.
    strFormat.SetMeasurableCharacterRanges(charRanges)

    ' Loop counter (unsigned 8-bit integer).
    Dim i As Byte


    ' Measure the char ranges for a given string and layout rectangle.
    ' Each area occupied by the characters in a range is stored as a
    ' region. then draw the string and layout rectangle and paint the
    ' regions.
    charRegions = g.MeasureCharacterRanges(str, tnrFont, _
    RectangleF.op_Implicit(layoutRectA), strFormat)
    g.DrawString(str, tnrFont, Brushes.Blue, _
    RectangleF.op_Implicit(layoutRectA), strFormat)
    g.DrawRectangle(Pens.Black, layoutRectA)

    ' Paint the regions.
    For i = 0 To charRegions.Length - 1
        g.FillRegion(redBrush, charRegions(i))
    Next i

    ' Repeat the above steps, but include trailing spaces in the char
    ' range measurement by setting the appropriate string format flag.
    strFormat.FormatFlags = StringFormatFlags.MeasureTrailingSpaces
    charRegions = g.MeasureCharacterRanges(str, tnrFont, _
    RectangleF.op_Implicit(layoutRectB), strFormat)
    g.DrawString(str, tnrFont, Brushes.Blue, _
    RectangleF.op_Implicit(layoutRectB), strFormat)
    g.DrawRectangle(Pens.Black, layoutRectB)

    ' Paint the regions.
    For i = 0 To charRegions.Length - 1
        g.FillRegion(redBrush, charRegions(i))
    Next i

    ' Clear all the format flags.
    strFormat.FormatFlags = 0

    ' Repeat the steps, but use a different layout rectangle. The
    ' dimensions of the layout rectangle and the size of the font both
    ' affect the character range measurement.
    charRegions = g.MeasureCharacterRanges(str, tnrFont, _
    RectangleF.op_Implicit(layoutRectC), strFormat)
    g.DrawString(str, tnrFont, Brushes.Blue, _
    RectangleF.op_Implicit(layoutRectC), strFormat)
    g.DrawRectangle(Pens.Black, layoutRectC)

    ' Paint the regions.
    For i = 0 To charRegions.Length - 1
        g.FillRegion(redBrush, charRegions(i))
    Next i
End Sub

注釈

32文字の範囲を超える値を設定することはできSystem.OverflowExceptionません。を指定すると、が発生します。Setting more than 32 character ranges is not allowed and will cause an System.OverflowException.

適用対象