Socket コンストラクター

定義

Socket クラスの新しいインスタンスを初期化します。Initializes a new instance of the Socket class.

オーバーロード

Socket(SocketInformation)

DuplicateAndClose(Int32) から返された値を指定して、Socket クラスの新しいインスタンスを初期化します。Initializes a new instance of the Socket class using the specified value returned from DuplicateAndClose(Int32).

Socket(SocketType, ProtocolType)

指定したソケットの種類とプロトコルを使用して、Socket クラスの新しいインスタンスを初期化します。Initializes a new instance of the Socket class using the specified socket type and protocol.

Socket(AddressFamily, SocketType, ProtocolType)

指定したアドレス ファミリ、ソケットの種類、およびプロトコルを使用して、Socket クラスの新しいインスタンスを初期化します。Initializes a new instance of the Socket class using the specified address family, socket type and protocol.

Socket(SocketInformation)

DuplicateAndClose(Int32) から返された値を指定して、Socket クラスの新しいインスタンスを初期化します。Initializes a new instance of the Socket class using the specified value returned from DuplicateAndClose(Int32).

public:
 Socket(System::Net::Sockets::SocketInformation socketInformation);
public Socket (System.Net.Sockets.SocketInformation socketInformation);
new System.Net.Sockets.Socket : System.Net.Sockets.SocketInformation -> System.Net.Sockets.Socket

パラメーター

socketInformation
SocketInformation

DuplicateAndClose(Int32) によって返されるソケット情報。The socket information returned by DuplicateAndClose(Int32).

注釈

各呼び出しの引数と同じバイト配列を使用して Socket コンストラクターを複数回呼び出す場合は、基になるソケットが同じである複数のマネージ Socketを作成します。If you call the Socket constructor multiple times with the same byte array as the argument for each call, you will create multiple managed Sockets with the same underlying socket. この方法は推奨されません。This practice is strongly discouraged.

Socket(SocketType, ProtocolType)

指定したソケットの種類とプロトコルを使用して、Socket クラスの新しいインスタンスを初期化します。Initializes a new instance of the Socket class using the specified socket type and protocol.

public:
 Socket(System::Net::Sockets::SocketType socketType, System::Net::Sockets::ProtocolType protocolType);
public Socket (System.Net.Sockets.SocketType socketType, System.Net.Sockets.ProtocolType protocolType);
new System.Net.Sockets.Socket : System.Net.Sockets.SocketType * System.Net.Sockets.ProtocolType -> System.Net.Sockets.Socket

パラメーター

socketType
SocketType

SocketType 値のいずれか。One of the SocketType values.

protocolType
ProtocolType

ProtocolType 値のいずれか。One of the ProtocolType values.

例外

socketTypeprotocolType を組み合わせると、無効なソケットになります。The combination of socketType and protocolType results in an invalid socket.

注釈

socketType パラメーターは Socket クラスの型を指定し、protocolType パラメーターは Socketで使用されるプロトコルを指定します。The socketType parameter specifies the type of the Socket class and the protocolType parameter specifies the protocol used by Socket. 2つのパラメーターは独立していません。The two parameters are not independent. 多くの場合、Socket の型はプロトコルで暗黙の型になります。Often the Socket type is implicit in the protocol. Socket 型とプロトコルの種類の組み合わせによって無効な Socketが発生した場合、このコンストラクターは SocketExceptionをスローします。If the combination of Socket type and protocol type results in an invalid Socket, this constructor throws a SocketException.

注意

このコンストラクターが SocketExceptionをスローする場合は、SocketException.ErrorCode プロパティを使用して、特定のエラーコードを取得します。If this constructor throws a SocketException, use the SocketException.ErrorCode property to obtain the specific error code. このコードを取得したら、 Windows Sockets version 2 API エラーコードのドキュメントを参照して、エラーの詳細な説明を参照してください。After you have obtained this code, refer to the Windows Sockets version 2 API error code documentation for a detailed description of the error.

注意

このメンバーは、アプリケーションでネットワーク トレースが有効にされている場合にトレース情報を出力します。This member outputs trace information when you enable network tracing in your application. 詳細については、「 .NET Framework のネットワークトレース」を参照してください。For more information, see Network Tracing in the .NET Framework.

Socket(AddressFamily, SocketType, ProtocolType)

指定したアドレス ファミリ、ソケットの種類、およびプロトコルを使用して、Socket クラスの新しいインスタンスを初期化します。Initializes a new instance of the Socket class using the specified address family, socket type and protocol.

public:
 Socket(System::Net::Sockets::AddressFamily addressFamily, System::Net::Sockets::SocketType socketType, System::Net::Sockets::ProtocolType protocolType);
public Socket (System.Net.Sockets.AddressFamily addressFamily, System.Net.Sockets.SocketType socketType, System.Net.Sockets.ProtocolType protocolType);
new System.Net.Sockets.Socket : System.Net.Sockets.AddressFamily * System.Net.Sockets.SocketType * System.Net.Sockets.ProtocolType -> System.Net.Sockets.Socket

パラメーター

addressFamily
AddressFamily

AddressFamily 値のいずれか 1 つ。One of the AddressFamily values.

socketType
SocketType

SocketType 値のいずれか 1 つ。One of the SocketType values.

protocolType
ProtocolType

ProtocolType 値のいずれか 1 つ。One of the ProtocolType values.

例外

addressFamilysocketType、および protocolType を組み合わせると、無効なソケットになります。The combination of addressFamily, socketType, and protocolType results in an invalid socket.

Socket クラスのインスタンスを作成する方法を次のコード例に示します。The following code example demonstrates how to create an instance of the Socket class.

#using <System.dll>

using namespace System;
using namespace System::Text;
using namespace System::IO;
using namespace System::Net;
using namespace System::Net::Sockets;
String^ DoSocketGet( String^ server )
{
   
   //Set up variables and String to write to the server.
   Encoding^ ASCII = Encoding::ASCII;
   String^ Get =  "GET / HTTP/1.1\r\nHost: ";
   Get->Concat( server,  "\r\nConnection: Close\r\n\r\n" );
   array<Byte>^ByteGet = ASCII->GetBytes( Get );
   array<Byte>^RecvBytes = gcnew array<Byte>(256);
   String^ strRetPage = nullptr;
   
   // IPAddress and IPEndPoint represent the endpoint that will
   //   receive the request.
   // Get first IPAddress in list return by DNS.
   try
   {
      
      // Define those variables to be evaluated in the next for loop and 
      // then used to connect to the server. These variables are defined
      // outside the for loop to make them accessible there after.
      Socket^ s = nullptr;
      IPEndPoint^ hostEndPoint;
      IPAddress^ hostAddress = nullptr;
      int conPort = 80;
      
      // Get DNS host information.
      IPHostEntry^ hostInfo = Dns::Resolve( server );
      
      // Get the DNS IP addresses associated with the host.
      array<IPAddress^>^IPaddresses = hostInfo->AddressList;
      
      // Evaluate the socket and receiving host IPAddress and IPEndPoint. 
      for ( int index = 0; index < IPaddresses->Length; index++ )
      {
         hostAddress = IPaddresses[ index ];
         hostEndPoint = gcnew IPEndPoint( hostAddress,conPort );
         
         // Creates the Socket to send data over a TCP connection.
         s = gcnew Socket( AddressFamily::InterNetwork,SocketType::Stream,ProtocolType::Tcp );
         
         // Connect to the host using its IPEndPoint.
         s->Connect( hostEndPoint );
         if (  !s->Connected )
         {
            
            // Connection failed, try next IPaddress.
            strRetPage =  "Unable to connect to host";
            s = nullptr;
            continue;
         }

         
         // Sent the GET request to the host.
         s->Send( ByteGet, ByteGet->Length, SocketFlags::None );
         

      }
      
      // Receive the host home page content and loop until all the data is received.
      Int32 bytes = s->Receive( RecvBytes, RecvBytes->Length, SocketFlags::None );
      strRetPage =  "Default HTML page on ";
      strRetPage->Concat( server,  ":\r\n", ASCII->GetString( RecvBytes, 0, bytes ) );
      while ( bytes > 0 )
      {
         bytes = s->Receive( RecvBytes, RecvBytes->Length, SocketFlags::None );
         strRetPage->Concat( ASCII->GetString( RecvBytes, 0, bytes ) );
      }

      
   }
   catch ( SocketException^ e ) 
   {
      Console::WriteLine(  "SocketException caught!!!" );
      Console::Write(  "Source : " );
      Console::WriteLine( e->Source );
      Console::Write(  "Message : " );
      Console::WriteLine( e->Message );
   }
   catch ( ArgumentNullException^ e ) 
   {
      Console::WriteLine(  "ArgumentNULLException caught!!!" );
      Console::Write(  "Source : " );
      Console::WriteLine( e->Source );
      Console::Write(  "Message : " );
      Console::WriteLine( e->Message );
   }
   catch ( NullReferenceException^ e ) 
   {
      Console::WriteLine(  "NULLReferenceException caught!!!" );
      Console::Write(  "Source : " );
      Console::WriteLine( e->Source );
      Console::Write(  "Message : " );
      Console::WriteLine( e->Message );
   }
   catch ( Exception^ e ) 
   {
      Console::WriteLine(  "Exception caught!!!" );
      Console::Write(  "Source : " );
      Console::WriteLine( e->Source );
      Console::Write(  "Message : " );
      Console::WriteLine( e->Message );
   }

   return strRetPage;
}

int main()
{
   Console::WriteLine( DoSocketGet(  "localhost" ) );
}

using System;
using System.Text;
using System.IO;
using System.Net;
using System.Net.Sockets;

public class Sample
{

  public static string DoSocketGet(string server) 
  {
    //Set up variables and String to write to the server.
    Encoding ASCII = Encoding.ASCII;
    string Get = "GET / HTTP/1.1\r\nHost: " + server + 
                 "\r\nConnection: Close\r\n\r\n";
    Byte[] ByteGet = ASCII.GetBytes(Get);
    Byte[] RecvBytes = new Byte[256];
    String strRetPage = null;


    // IPAddress and IPEndPoint represent the endpoint that will
    //   receive the request.
    // Get first IPAddress in list return by DNS.


    try
    {


      // Define those variables to be evaluated in the next for loop and 
      // then used to connect to the server. These variables are defined
      // outside the for loop to make them accessible there after.
      Socket s = null;
      IPEndPoint hostEndPoint;
      IPAddress hostAddress = null;
      int conPort = 80;

      // Get DNS host information.
      IPHostEntry hostInfo = Dns.GetHostEntry(server);
      // Get the DNS IP addresses associated with the host.
      IPAddress[] IPaddresses = hostInfo.AddressList;

      // Evaluate the socket and receiving host IPAddress and IPEndPoint. 
      for (int index=0; index<IPaddresses.Length; index++)
      {
        hostAddress = IPaddresses[index];
        hostEndPoint = new IPEndPoint(hostAddress, conPort);


        // Creates the Socket to send data over a TCP connection.
        s = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp );


 
        // Connect to the host using its IPEndPoint.
        s.Connect(hostEndPoint);

        if (!s.Connected)
        {
          // Connection failed, try next IPaddress.
          strRetPage = "Unable to connect to host";
          s = null;
          continue;
        }

        // Sent the GET request to the host.
        s.Send(ByteGet, ByteGet.Length, 0);


      } // End of the for loop.      


 
      // Receive the host home page content and loop until all the data is received.
      Int32 bytes = s.Receive(RecvBytes, RecvBytes.Length, 0);
      strRetPage = "Default HTML page on " + server + ":\r\n";
      strRetPage = strRetPage + ASCII.GetString(RecvBytes, 0, bytes);
 
      while (bytes > 0)
      {
        bytes = s.Receive(RecvBytes, RecvBytes.Length, 0);
        strRetPage = strRetPage + ASCII.GetString(RecvBytes, 0, bytes);
      }

    
    } // End of the try block.
    
    catch(SocketException e) 
    {
      Console.WriteLine("SocketException caught!!!");
      Console.WriteLine("Source : " + e.Source);
      Console.WriteLine("Message : " + e.Message);
    }
    catch(ArgumentNullException e)
    {
      Console.WriteLine("ArgumentNullException caught!!!");
      Console.WriteLine("Source : " + e.Source);
      Console.WriteLine("Message : " + e.Message);
    }
    catch(NullReferenceException e)
    {
      Console.WriteLine("NullReferenceException caught!!!");
      Console.WriteLine("Source : " + e.Source);
      Console.WriteLine("Message : " + e.Message);
    }
    catch(Exception e)
    {
      Console.WriteLine("Exception caught!!!");
      Console.WriteLine("Source : " + e.Source);
      Console.WriteLine("Message : " + e.Message);
    }
    
    return strRetPage;

}
   public static void Main()
   {
      Console.WriteLine(DoSocketGet("localhost"));
   }
 }
Imports System.Text
Imports System.IO
Imports System.Net
Imports System.Net.Sockets

 _

Public Class Sample
   
   
   Public Shared Function DoSocketGet(server As String) As String
      'Set up variables and String to write to the server.
    Dim ASCII As Encoding = Encoding.ASCII
    Dim [Get] As String = "GET / HTTP/1.1" + ControlChars.Lf + ControlChars.NewLine + "Host: " + server + ControlChars.Lf + ControlChars.NewLine + "Connection: Close" + ControlChars.Lf + ControlChars.NewLine + ControlChars.Lf + ControlChars.NewLine
    Dim ByteGet As [Byte]() = ASCII.GetBytes([Get])
    Dim RecvBytes(256) As [Byte]
    Dim strRetPage As [String] = Nothing


      
      ' IPAddress and IPEndPoint represent the endpoint that will
      '   receive the request.
      ' Get first IPAddress in list return by DNS.
      Try

 

         ' Define those variables to be evaluated in the next for loop and 
         ' then used to connect to the server. These variables are defined
         ' outside the for loop to make them accessible there after.
         Dim s As Socket = Nothing
         Dim hostEndPoint As IPEndPoint
         Dim hostAddress As IPAddress = Nothing
         Dim conPort As Integer = 80
         
         ' Get DNS host information.
         Dim hostInfo As IPHostEntry = Dns.Resolve(server)
         ' Get the DNS IP addresses associated with the host.
         Dim IPaddresses As IPAddress() = hostInfo.AddressList
         
         ' Evaluate the socket and receiving host IPAddress and IPEndPoint. 
      Dim index As Integer = 0
      For index = 0 To IPaddresses.Length - 1
        hostAddress = IPaddresses(index)
        hostEndPoint = New IPEndPoint(hostAddress, conPort)


        ' Creates the Socket to send data over a TCP connection.
        s = New Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp)


        ' Connect to the host using its IPEndPoint.
        s.Connect(hostEndPoint)

        If Not s.Connected Then
          ' Connection failed, try next IPaddress.
          strRetPage = "Unable to connect to host"
          s = Nothing
          GoTo ContinueFor1
        End If


        ' Sent the GET request to the host.
        s.Send(ByteGet, ByteGet.Length, 0)


ContinueFor1:
      Next index  ' End of the for loop.
      



      ' Receive the host home page content and loop until all the data is received.

      'Dim bytes As Int32 = s.Receive(RecvBytes, RecvBytes.Length, 0)
      Dim bytes As Int32 = s.Receive(RecvBytes, RecvBytes.Length, 0)

      strRetPage = "Default HTML page on " + server + ":\r\n"
      strRetPage = "Default HTML page on " + server + ":" + ControlChars.Lf + ControlChars.NewLine

      Dim i As Integer

      While bytes > 0

        bytes = s.Receive(RecvBytes, RecvBytes.Length, 0)

        strRetPage = strRetPage + ASCII.GetString(RecvBytes, 0, bytes)

      End While


      ' End of the try block.
    Catch e As SocketException
         Console.WriteLine("SocketException caught!!!")
         Console.WriteLine(("Source : " + e.Source))
         Console.WriteLine(("Message : " + e.Message))
      Catch e As ArgumentNullException
         Console.WriteLine("ArgumentNullException caught!!!")
         Console.WriteLine(("Source : " + e.Source))
         Console.WriteLine(("Message : " + e.Message))
      Catch e As NullReferenceException
         Console.WriteLine("NullReferenceException caught!!!")
         Console.WriteLine(("Source : " + e.Source))
         Console.WriteLine(("Message : " + e.Message))
      Catch e As Exception
         Console.WriteLine("Exception caught!!!")
         Console.WriteLine(("Source : " + e.Source))
         Console.WriteLine(("Message : " + e.Message))
      End Try
      
      Return strRetPage
   End Function 'DoSocketGet
    
   Public Shared Sub Main()
    Console.WriteLine(DoSocketGet("localhost"))
   End Sub
End Class

注釈

addressFamily パラメーターは、Socket クラスが使用するアドレス指定スキームを指定します。 socketType パラメーターは Socket クラスの型を指定し、protocolType パラメーターは Socketによって使用されるプロトコルを指定します。The addressFamily parameter specifies the addressing scheme that the Socket class uses, the socketType parameter specifies the type of the Socket class, and the protocolType parameter specifies the protocol used by Socket. この3つのパラメーターは独立していません。The three parameters are not independent. アドレスファミリによっては、それらで使用できるプロトコルが制限されている場合があります。また、多くの場合、Socket の種類がプロトコルで暗黙的に使用されます。Some address families restrict which protocols can be used with them, and often the Socket type is implicit in the protocol. アドレスファミリ、Socket の種類、およびプロトコルの種類の組み合わせによって無効な Socketが生成された場合、このコンストラクターは SocketExceptionをスローします。If the combination of address family, Socket type, and protocol type results in an invalid Socket, this constructor throws a SocketException.

注意

このコンストラクターが SocketExceptionをスローする場合は、SocketException.ErrorCode プロパティを使用して、特定のエラーコードを取得します。If this constructor throws a SocketException, use the SocketException.ErrorCode property to obtain the specific error code. このコードを取得したら、 Windows Sockets version 2 API エラーコードのドキュメントを参照して、エラーの詳細な説明を参照してください。After you have obtained this code, refer to the Windows Sockets version 2 API error code documentation for a detailed description of the error.

注意

このメンバーは、アプリケーションでネットワーク トレースが有効にされている場合にトレース情報を出力します。This member outputs trace information when you enable network tracing in your application. 詳細については、「 .NET Framework のネットワークトレース」を参照してください。For more information, see Network Tracing in the .NET Framework.

こちらもご覧ください

適用対象