AssemblyName.Name プロパティ

定義

アセンブリの簡易名を取得または設定します。Gets or sets the simple name of the assembly. 必ずそうとは限りませんが、これは通常、アセンブリのマニフェスト ファイルの名前から拡張子を取り除いたものになります。This is usually, but not necessarily, the file name of the manifest file of the assembly, minus its extension.

public:
 property System::String ^ Name { System::String ^ get(); void set(System::String ^ value); };
public string Name { get; set; }
member this.Name : string with get, set
Public Property Name As String

プロパティ値

アセンブリの簡易名。The simple name of the assembly.

次の例では、動的アセンブリを出力し、現在のディレクトリに保存します。The following example emits a dynamic assembly and saves it to the current directory. アセンブリが作成されたら、Name プロパティを使用して、動的アセンブリの簡易名を設定します。When the assembly is created, the Name property is used to set the simple name of the dynamic assembly.

using namespace System;
using namespace System::Reflection;
using namespace System::Threading;
using namespace System::Reflection::Emit;
static void MakeAssembly( AssemblyName^ myAssemblyName, String^ fileName )
{
   // Get the assembly builder from the application domain associated with the current thread.
   AssemblyBuilder^ myAssemblyBuilder = Thread::GetDomain()->DefineDynamicAssembly( myAssemblyName, AssemblyBuilderAccess::RunAndSave );

   // Create a dynamic module in the assembly.
   ModuleBuilder^ myModuleBuilder = myAssemblyBuilder->DefineDynamicModule( "MyModule", fileName );

   // Create a type in the module.
   TypeBuilder^ myTypeBuilder = myModuleBuilder->DefineType( "MyType" );

   // Create a method called 'Main'.
   MethodBuilder^ myMethodBuilder = myTypeBuilder->DefineMethod( "Main", static_cast<MethodAttributes>(MethodAttributes::Public | MethodAttributes::HideBySig | MethodAttributes::Static), void::typeid, nullptr );

   // Get the Intermediate Language generator for the method.
   ILGenerator^ myILGenerator = myMethodBuilder->GetILGenerator();

   // Use the utility method to generate the IL instructions that print a String* to the console.
   myILGenerator->EmitWriteLine( "Hello World!" );

   // Generate the 'ret' IL instruction.
   myILGenerator->Emit( OpCodes::Ret );

   // End the creation of the type.
   myTypeBuilder->CreateType();

   // Set the method with name 'Main' as the entry point in the assembly.
   myAssemblyBuilder->SetEntryPoint( myMethodBuilder );
   myAssemblyBuilder->Save( fileName );
}

int main()
{
   // Create a dynamic assembly with name 'MyAssembly' and build version '1.0.0.2001'.
   AssemblyName^ myAssemblyName = gcnew AssemblyName;
   myAssemblyName->Name = "MyAssembly";
   myAssemblyName->Version = gcnew Version( "1.0.0.2001" );
   MakeAssembly( myAssemblyName, "MyAssembly.exe" );

   // Get all the assemblies currently loaded in the application domain.
   array<Assembly^>^myAssemblies = Thread::GetDomain()->GetAssemblies();

   // Get the dynamic assembly named 'MyAssembly'. 
   Assembly^ myAssembly = nullptr;
   for ( int i = 0; i < myAssemblies->Length; i++ )
   {
      if ( String::Compare( myAssemblies[ i ]->GetName()->Name, "MyAssembly" ) == 0 )
            myAssembly = myAssemblies[ i ];
   }
   if ( myAssembly != nullptr )
   {
      Console::WriteLine(  "\nDisplaying the assembly name\n" );
      Console::WriteLine( myAssembly );
   }
}

using System;
using System.Reflection;
using System.Threading;
using System.Reflection.Emit;

public class AssemblyName_Constructor
{
   public static void MakeAssembly(AssemblyName myAssemblyName, string fileName)
   {
      // Get the assembly builder from the application domain associated with the current thread.
      AssemblyBuilder myAssemblyBuilder = Thread.GetDomain().DefineDynamicAssembly(myAssemblyName, AssemblyBuilderAccess.RunAndSave);
      // Create a dynamic module in the assembly.
      ModuleBuilder myModuleBuilder = myAssemblyBuilder.DefineDynamicModule("MyModule", fileName);
      // Create a type in the module.
      TypeBuilder myTypeBuilder = myModuleBuilder.DefineType("MyType");
      // Create a method called 'Main'.
      MethodBuilder myMethodBuilder = myTypeBuilder.DefineMethod("Main", MethodAttributes.Public | MethodAttributes.HideBySig |
         MethodAttributes.Static, typeof(void), null);
      // Get the Intermediate Language generator for the method.
      ILGenerator myILGenerator = myMethodBuilder.GetILGenerator();
      // Use the utility method to generate the IL instructions that print a string to the console.
      myILGenerator.EmitWriteLine("Hello World!");
      // Generate the 'ret' IL instruction.
      myILGenerator.Emit(OpCodes.Ret);
      // End the creation of the type.
      myTypeBuilder.CreateType();
      // Set the method with name 'Main' as the entry point in the assembly.
      myAssemblyBuilder.SetEntryPoint(myMethodBuilder);
      myAssemblyBuilder.Save(fileName);
   }

   public static void Main()
   {

      // Create a dynamic assembly with name 'MyAssembly' and build version '1.0.0.2001'.
      AssemblyName myAssemblyName = new AssemblyName(); 
      myAssemblyName.Name = "MyAssembly";
      myAssemblyName.Version = new Version("1.0.0.2001");
      MakeAssembly(myAssemblyName, "MyAssembly.exe");

      // Get all the assemblies currently loaded in the application domain.
      Assembly[] myAssemblies = Thread.GetDomain().GetAssemblies();

      // Get the dynamic assembly named 'MyAssembly'. 
      Assembly myAssembly = null;
      for(int i = 0; i < myAssemblies.Length; i++)
      {
         if(String.Compare(myAssemblies[i].GetName().Name, "MyAssembly") == 0)
            myAssembly = myAssemblies[i];
      }
      if(myAssembly != null)
      {
         Console.WriteLine("\nDisplaying the assembly name\n");
         Console.WriteLine(myAssembly);
      }
   }
}
Imports System.Reflection
Imports System.Threading
Imports System.Reflection.Emit

Public Class AssemblyName_Constructor
   
   Public Shared Sub MakeAssembly(myAssemblyName As AssemblyName, fileName As String)
      ' Get the assembly builder from the application domain associated with the current thread.
      Dim myAssemblyBuilder As AssemblyBuilder = Thread.GetDomain().DefineDynamicAssembly(myAssemblyName, AssemblyBuilderAccess.RunAndSave)
      ' Create a dynamic module in the assembly.
      Dim myModuleBuilder As ModuleBuilder = myAssemblyBuilder.DefineDynamicModule("MyModule", fileName)
      ' Create a type in the module.
      Dim myTypeBuilder As TypeBuilder = myModuleBuilder.DefineType("MyType")
      ' Create a method called 'Main'.
      Dim myMethodBuilder As MethodBuilder = myTypeBuilder.DefineMethod("Main", MethodAttributes.Public Or MethodAttributes.HideBySig Or MethodAttributes.Static, GetType(object), Nothing)
      Dim myILGenerator As ILGenerator = myMethodBuilder.GetILGenerator()
      ' Use the utility method to generate the IL instructions that print a string to the console.
      myILGenerator.EmitWriteLine("Hello World!")
      ' Generate the 'ret' IL instruction.
      myILGenerator.Emit(OpCodes.Ret)
      ' End the creation of the type.
      myTypeBuilder.CreateType()
      ' Set the method with name 'Main' as the entry point in the assembly.
      myAssemblyBuilder.SetEntryPoint(myMethodBuilder)
      myAssemblyBuilder.Save(fileName)
   End Sub
   
   
   Public Shared Sub Main()
      

      ' Create a dynamic assembly with name 'MyAssembly' and build version '1.0.0.2001'.
      Dim myAssemblyName As New AssemblyName()
      myAssemblyName.Name = "MyAssembly"
      myAssemblyName.Version = New Version("1.0.0.2001")
      MakeAssembly(myAssemblyName, "MyAssembly.exe")
      
      ' Get all the assemblies currently loaded in the application domain.
      Dim myAssemblies As [Assembly]() = Thread.GetDomain().GetAssemblies()
      
      ' Get the dynamic assembly named 'MyAssembly'. 
      Dim myAssembly As [Assembly] = Nothing
      Dim i As Integer
      For i = 0 To myAssemblies.Length - 1
         If [String].Compare(myAssemblies(i).GetName().Name, "MyAssembly") = 0 Then
            myAssembly = myAssemblies(i)
         End If
      Next i
      If Not (myAssembly Is Nothing) Then
         Console.WriteLine(ControlChars.Cr + "Displaying the assembly name" + ControlChars.Cr)
         Console.WriteLine(myAssembly)
      End If
   End Sub
End Class

注釈

マニフェストファイルは、アセンブリマニフェストを含むファイルです。The manifest file is the file that contains the assembly manifest.

たとえば、"MyAssembly" という名前の単一ファイルアセンブリの簡易名は、"MyAssembly" です。For example, the simple name of a single-file assembly named "MyAssembly.dll" is "MyAssembly".

適用対象

こちらもご覧ください