Single.NaN Single.NaN Single.NaN Single.NaN Field

定義

非数 (NaN) を表します。Represents not a number (NaN). このフィールドは定数です。This field is constant.

public: float NaN = NaN;
public const float NaN = NaN;
val mutable NaN : single
Public Const NaN As Single  = NaN

フィールド値

次の例で、NaN定数。The following example demonstrates the NaN constant.

Single zero = 0;

// This condition will return false.
if ( (0 / zero) == Single::NaN )
{
   Console::WriteLine( "0 / 0 can be tested with Single::NaN." );
}
else
{
   Console::WriteLine( "0 / 0 cannot be tested with Single::NaN; use Single::IsNan() instead." );
}
Single zero = 0;

// This condition will return false.
if ((0 / zero) == Single.NaN)
{
    Console.WriteLine("0 / 0 can be tested with Single.NaN.");
}
else
{
    Console.WriteLine("0 / 0 cannot be tested with Single.NaN; use Single.IsNan() instead.");
}
Dim zero As Single = 0

' This condition will return false.
If (0 / zero) = Single.NaN Then
    Console.WriteLine("0 / 0 can be tested with Single.NaN.")
Else
    Console.WriteLine("0 / 0 cannot be tested with Single.NaN; use Single.IsNan() instead.")
End If

注釈

メソッドまたは演算子を返しますNaNと操作の結果は未定義です。A method or operator returns NaN when the result of an operation is undefined. たとえば、0 を 0 で除算した結果はNaN、次の例を示しています。For example, the result of dividing zero by zero is NaN, as the following example shows. (0 0 以外の数値で除算返されるいずれかに注意してくださいただしPositiveInfinityまたはNegativeInfinity除数の符号に応じて、します。)。(But note that dividing a non-zero number by zero returns either PositiveInfinity or NegativeInfinity, depending on the sign of the divisor.)

float zero = 0.0f;
Console.WriteLine("{0} / {1} = {2}", zero, zero, zero/zero);
// The example displays the following output:
//         0 / 0 = NaN      
Dim zero As Single = 0
Console.WriteLine("{0} / {1} = {2}", zero, zero, zero/zero)
' The example displays the following output:
'         0 / 0 = NaN      

メソッドがさらに、呼び出し、NaN値またはに対する操作をNaN値を返します。NaN次の例に示すように。In addition, a method call with a NaN value or an operation on a NaN value returns NaN, as the following example shows.

float nan1 = Single.NaN;

Console.WriteLine("{0} + {1} = {2}", 3, nan1, 3 + nan1);
Console.WriteLine("Abs({0}) = {1}", nan1, Math.Abs(nan1));
// The example displays the following output:
//       3 + NaN = NaN
//       Abs(NaN) = NaN
Dim nan1 As Single = Single.NaN

Console.WriteLine("{0} + {1} = {2}", 3, nan1, 3 + nan1)
Console.WriteLine("Abs({0}) = {1}", nan1, Math.Abs(nan1))
' The example displays the following output:
'       3 + NaN = NaN
'       Abs(NaN) = NaN

使用して、IsNaN値が数値ではないかどうかを判断するメソッド。Use the IsNaN method to determine whether a value is not a number. 一般に、Singleを比較する演算子を使用することはできませんSingle.NaNSingleですが、値比較メソッド (などEqualsCompareTo) ことができます。In general, Single operators cannot be used to compare Single.NaN with other Single values, although comparison methods (such as Equals and CompareTo) can. 次の例は、間における動作の違いを示しています。Single比較演算子とメソッド。The following example illustrates the difference in behavior between Single comparison operators and methods.

using System;

public class Example
{
   public static void Main()
   {
      Console.WriteLine("NaN == NaN: {0}", Single.NaN == Single.NaN); 
      Console.WriteLine("NaN != NaN: {0}", Single.NaN != Single.NaN); 
      Console.WriteLine("NaN.Equals(NaN): {0}", Single.NaN.Equals(Single.NaN)); 
      Console.WriteLine("! NaN.Equals(NaN): {0}", ! Single.NaN.Equals(Single.NaN)); 
      Console.WriteLine("IsNaN: {0}", Double.IsNaN(Double.NaN));
      
      Console.WriteLine("\nNaN > NaN: {0}", Single.NaN > Single.NaN); 
      Console.WriteLine("NaN >= NaN: {0}", Single.NaN >= Single.NaN); 
      Console.WriteLine("NaN < NaN: {0}", Single.NaN < Single.NaN);
      Console.WriteLine("NaN < 100.0: {0}", Single.NaN < 100.0f); 
      Console.WriteLine("NaN <= 100.0: {0}", Single.NaN <= 100.0f); 
      Console.WriteLine("NaN >= 100.0: {0}", Single.NaN > 100.0f);
      Console.WriteLine("NaN.CompareTo(NaN): {0}", Single.NaN.CompareTo(Single.NaN)); 
      Console.WriteLine("NaN.CompareTo(100.0): {0}", Single.NaN.CompareTo(100.0f)); 
      Console.WriteLine("(100.0).CompareTo(Single.NaN): {0}", (100.0f).CompareTo(Single.NaN)); 
   }
}
// The example displays the following output:
//       NaN == NaN: False
//       NaN != NaN: True
//       NaN.Equals(NaN): True
//       ! NaN.Equals(NaN): False
//       IsNaN: True
//
//       NaN > NaN: False
//       NaN >= NaN: False
//       NaN < NaN: False
//       NaN < 100.0: False
//       NaN <= 100.0: False
//       NaN >= 100.0: False
//       NaN.CompareTo(NaN): 0
//       NaN.CompareTo(100.0): -1
//       (100.0).CompareTo(Single.NaN): 1
Module Example
   Public Sub Main()
      Console.WriteLine("NaN = NaN: {0}", Single.NaN = Single.NaN) 
      Console.WriteLine("NaN <> NaN: {0}", Single.NaN <> Single.NaN) 
      Console.WriteLine("NaN.Equals(NaN): {0}", Single.NaN.Equals(Single.NaN)) 
      Console.WriteLine("Not NaN.Equals(NaN): {0}", Not Single.NaN.Equals(Single.NaN)) 
      Console.WriteLine("IsNaN: {0}", Double.IsNaN(Double.NaN))
      Console.WriteLine()
      Console.WriteLine("NaN > NaN: {0}", Single.NaN > 100.0f) 
      Console.WriteLine("NaN >= NaN: {0}", Single.NaN >= 100.0f) 
      Console.WriteLine("NaN < NaN: {0}", Single.NaN < Single.NaN)
      Console.WriteLine("NaN < 100.0: {0}", Single.NaN < 100.0f) 
      Console.WriteLine("NaN <= 100.0: {0}", Single.NaN <= 100.0f) 
      Console.WriteLine("NaN >= 100.0: {0}", Single.NaN > 100.0f)
      Console.WriteLine("NaN.CompareTo(NaN): {0}", Single.NaN.CompareTo(Single.Nan)) 
      Console.WriteLine("NaN.CompareTo(100.0): {0}", Single.NaN.CompareTo(100.0f)) 
      Console.WriteLine("(100.0).CompareTo(Single.NaN): {0}", (100.0f).CompareTo(Single.NaN)) 
   End Sub
End Module
' The example displays the following output:
'       NaN == NaN: False
'       NaN != NaN: True
'       NaN.Equals(NaN): True
'       ! NaN.Equals(NaN): False
'       IsNaN: True
'
'       NaN > NaN: False
'       NaN >= NaN: False
'       NaN < NaN: False
'       NaN < 100.0: False
'       NaN <= 100.0: False
'       NaN >= 100.0: False
'       NaN.CompareTo(NaN): 0
'       NaN.CompareTo(100.0): -1
'       (100.0).CompareTo(Single.NaN): 1

適用対象

こちらもご覧ください