方法: 複数の変換を 3D モデルに適用する
このサンプルでは、RotateTransform3D と ScaleTransform3D を使用して、3D モデルを回転させたりスケールを変更したりする方法を示します。 次のコードは、XAML で GeometryModel3D の Transform プロパティにこれらの変換を適用する方法を示しています。
<!-- Apply multiple transformations to the object. In this sample, a rotation and scale transform
is applied. -->
<GeometryModel3D.Transform>
<Transform3DGroup>
<Transform3DGroup.Children>
<RotateTransform3D>
<RotateTransform3D.Rotation>
<!-- This transformation rotates the object. -->
<AxisAngleRotation3D Axis="0,3,0" Angle="40" />
</RotateTransform3D.Rotation>
</RotateTransform3D>
<!-- This Scale Transform stretches the object horizontally by 200 percent and shrinks it
vertically by 50 percent. -->
<ScaleTransform3D ScaleX="2" ScaleY="0.5" ScaleZ="1" CenterX="0" CenterY="0" CenterZ="0" />
</Transform3DGroup.Children>
</Transform3DGroup>
</GeometryModel3D.Transform>
コードは次のとおりです。
// Apply multiple transformations to the object. In this sample, a rotation and scale
// transform is applied.
// Create and apply a transformation that rotates the object.
RotateTransform3D myRotateTransform3D = new RotateTransform3D();
AxisAngleRotation3D myAxisAngleRotation3d = new AxisAngleRotation3D();
myAxisAngleRotation3d.Axis = new Vector3D(0,3,0);
myAxisAngleRotation3d.Angle = 40;
myRotateTransform3D.Rotation = myAxisAngleRotation3d;
// Add the rotation transform to a Transform3DGroup
Transform3DGroup myTransform3DGroup = new Transform3DGroup();
myTransform3DGroup.Children.Add(myRotateTransform3D);
// Create and apply a scale transformation that stretches the object along the local x-axis
// by 200 percent and shrinks it along the local y-axis by 50 percent.
ScaleTransform3D myScaleTransform3D = new ScaleTransform3D();
myScaleTransform3D.ScaleX = 2;
myScaleTransform3D.ScaleY = 0.5;
myScaleTransform3D.ScaleZ = 1;
// Add the scale transform to the Transform3DGroup.
myTransform3DGroup.Children.Add(myScaleTransform3D);
// Set the Transform property of the GeometryModel to the Transform3DGroup which includes
// both transformations. The 3D object now has two Transformations applied to it.
myGeometryModel.Transform = myTransform3DGroup;
' Apply multiple transformations to the object. In this sample, a rotation and scale
' transform is applied.
' Create and apply a transformation that rotates the object.
Dim myRotateTransform3D As New RotateTransform3D()
Dim myAxisAngleRotation3d As New AxisAngleRotation3D()
myAxisAngleRotation3d.Axis = New Vector3D(0,3,0)
myAxisAngleRotation3d.Angle = 40
myRotateTransform3D.Rotation = myAxisAngleRotation3d
' Add the rotation transform to a Transform3DGroup
Dim myTransform3DGroup As New Transform3DGroup()
myTransform3DGroup.Children.Add(myRotateTransform3D)
' Create and apply a scale transformation that stretches the object along the local x-axis
' by 200 percent and shrinks it along the local y-axis by 50 percent.
Dim myScaleTransform3D As New ScaleTransform3D()
myScaleTransform3D.ScaleX = 2
myScaleTransform3D.ScaleY = 0.5
myScaleTransform3D.ScaleZ = 1
' Add the scale transform to the Transform3DGroup.
myTransform3DGroup.Children.Add(myScaleTransform3D)
' Set the Transform property of the GeometryModel to the Transform3DGroup which includes
' both transformations. The 3D object now has two Transformations applied to it.
myGeometryModel.Transform = myTransform3DGroup
XAML サンプル
次のコードは、XAML でサンプル全体を示しています。
<Page xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" >
<DockPanel>
<Viewbox>
<Canvas Width="321" Height="201">
<!-- The Viewport3D provides a rendering surface for 3-D visual content. -->
<Viewport3D ClipToBounds="True" Width="150" Height="150" Canvas.Left="0" Canvas.Top="10">
<!-- Defines the camera used to view the 3D object. -->
<Viewport3D.Camera>
<PerspectiveCamera Position="0,0,2" LookDirection="0,0,-1" FieldOfView="60" />
</Viewport3D.Camera>
<!-- The ModelVisual3D children contain the 3D models -->
<Viewport3D.Children>
<!-- This ModelVisual3D defines the light cast in the scene. Without light, the 3D
object cannot be seen. Also, the direction of the lights affect shadowing. If desired,
you can create multiple lights with different colors that shine from different directions. -->
<ModelVisual3D>
<ModelVisual3D.Content>
<DirectionalLight Color="#FFFFFF" Direction="-0.612372,-0.5,-0.612372" />
</ModelVisual3D.Content>
</ModelVisual3D>
<ModelVisual3D>
<ModelVisual3D.Content>
<GeometryModel3D>
<!-- The geometry specifies the shape of the 3D plane. In this sample, a flat sheet is created. -->
<GeometryModel3D.Geometry>
<MeshGeometry3D
TriangleIndices="0,1,2 3,4,5 "
Normals="0,0,1 0,0,1 0,0,1 0,0,1 0,0,1 0,0,1 "
TextureCoordinates="0,0 1,0 1,1 1,1 0,1 0,0 "
Positions="-0.5,-0.5,0.5 0.5,-0.5,0.5 0.5,0.5,0.5 0.5,0.5,0.5 -0.5,0.5,0.5 -0.5,-0.5,0.5 " />
</GeometryModel3D.Geometry>
<!-- The material specifies the material applied to the 3D object. In this sample a linear gradient
covers the surface of the 3D object.-->
<GeometryModel3D.Material>
<MaterialGroup>
<DiffuseMaterial>
<DiffuseMaterial.Brush>
<LinearGradientBrush StartPoint="0,0.5" EndPoint="1,0.5">
<LinearGradientBrush.GradientStops>
<GradientStop Color="Yellow" Offset="0" />
<GradientStop Color="Red" Offset="0.25" />
<GradientStop Color="Blue" Offset="0.75" />
<GradientStop Color="LimeGreen" Offset="1" />
</LinearGradientBrush.GradientStops>
</LinearGradientBrush>
</DiffuseMaterial.Brush>
</DiffuseMaterial>
</MaterialGroup>
</GeometryModel3D.Material>
<!-- Apply multiple transformations to the object. In this sample, a rotation and scale transform
is applied. -->
<GeometryModel3D.Transform>
<Transform3DGroup>
<Transform3DGroup.Children>
<RotateTransform3D>
<RotateTransform3D.Rotation>
<!-- This transformation rotates the object. -->
<AxisAngleRotation3D Axis="0,3,0" Angle="40" />
</RotateTransform3D.Rotation>
</RotateTransform3D>
<!-- This Scale Transform stretches the object horizontally by 200 percent and shrinks it
vertically by 50 percent. -->
<ScaleTransform3D ScaleX="2" ScaleY="0.5" ScaleZ="1" CenterX="0" CenterY="0" CenterZ="0" />
</Transform3DGroup.Children>
</Transform3DGroup>
</GeometryModel3D.Transform>
</GeometryModel3D>
</ModelVisual3D.Content>
</ModelVisual3D>
</Viewport3D.Children>
</Viewport3D>
</Canvas>
</Viewbox>
</DockPanel>
</Page>
手続き型サンプル コード
コードでサンプル全体を次に示します。
using System;
using System.Windows;
using System.Windows.Controls;
using System.Windows.Media;
using System.Windows.Media.Media3D;
namespace SDKSample
{
public partial class MultipleTransformationsExample : Page
{
public MultipleTransformationsExample()
{
// Declare scene objects.
Viewport3D myViewport3D = new Viewport3D();
Model3DGroup myModel3DGroup = new Model3DGroup();
GeometryModel3D myGeometryModel = new GeometryModel3D();
ModelVisual3D myModelVisual3D = new ModelVisual3D();
// Defines the camera used to view the 3D object. In order to view the 3D object,
// the camera must be positioned and pointed such that the object is within view
// of the camera.
PerspectiveCamera myPCamera = new PerspectiveCamera();
// Specify where in the 3D scene the camera is.
myPCamera.Position = new Point3D(0, 0, 2);
// Specify the direction that the camera is pointing.
myPCamera.LookDirection = new Vector3D(0, 0, -1);
// Define camera's horizontal field of view in degrees.
myPCamera.FieldOfView = 60;
// Asign the camera to the viewport
myViewport3D.Camera = myPCamera;
// Define the lights cast in the scene. Without light, the 3D object cannot
// be seen. Note: to illuminate an object from additional directions, create
// additional lights.
DirectionalLight myDirectionalLight = new DirectionalLight();
myDirectionalLight.Color = Colors.White;
myDirectionalLight.Direction = new Vector3D(-0.61, -0.5, -0.61);
myModel3DGroup.Children.Add(myDirectionalLight);
// The geometry specifes the shape of the 3D plane. In this sample, a flat sheet
// is created.
MeshGeometry3D myMeshGeometry3D = new MeshGeometry3D();
// Create a collection of normal vectors for the MeshGeometry3D.
Vector3DCollection myNormalCollection = new Vector3DCollection();
myNormalCollection.Add(new Vector3D(0,0,1));
myNormalCollection.Add(new Vector3D(0,0,1));
myNormalCollection.Add(new Vector3D(0,0,1));
myNormalCollection.Add(new Vector3D(0,0,1));
myNormalCollection.Add(new Vector3D(0,0,1));
myNormalCollection.Add(new Vector3D(0,0,1));
myMeshGeometry3D.Normals = myNormalCollection;
// Create a collection of vertex positions for the MeshGeometry3D.
Point3DCollection myPositionCollection = new Point3DCollection();
myPositionCollection.Add(new Point3D(-0.5, -0.5, 0.5));
myPositionCollection.Add(new Point3D(0.5, -0.5, 0.5));
myPositionCollection.Add(new Point3D(0.5, 0.5, 0.5));
myPositionCollection.Add(new Point3D(0.5, 0.5, 0.5));
myPositionCollection.Add(new Point3D(-0.5, 0.5, 0.5));
myPositionCollection.Add(new Point3D(-0.5, -0.5, 0.5));
myMeshGeometry3D.Positions = myPositionCollection;
// Create a collection of texture coordinates for the MeshGeometry3D.
PointCollection myTextureCoordinatesCollection = new PointCollection();
myTextureCoordinatesCollection.Add(new Point(0, 0));
myTextureCoordinatesCollection.Add(new Point(1, 0));
myTextureCoordinatesCollection.Add(new Point(1, 1));
myTextureCoordinatesCollection.Add(new Point(1, 1));
myTextureCoordinatesCollection.Add(new Point(0, 1));
myTextureCoordinatesCollection.Add(new Point(0, 0));
myMeshGeometry3D.TextureCoordinates = myTextureCoordinatesCollection;
// Create a collection of triangle indices for the MeshGeometry3D.
Int32Collection myTriangleIndicesCollection = new Int32Collection();
myTriangleIndicesCollection.Add(0);
myTriangleIndicesCollection.Add(1);
myTriangleIndicesCollection.Add(2);
myTriangleIndicesCollection.Add(3);
myTriangleIndicesCollection.Add(4);
myTriangleIndicesCollection.Add(5);
myMeshGeometry3D.TriangleIndices = myTriangleIndicesCollection;
// Apply the mesh to the geometry model.
myGeometryModel.Geometry = myMeshGeometry3D;
// The material specifies the material applied to the 3D object. In this sample a
// linear gradient covers the surface of the 3D object.
// Create a horizontal linear gradient with four stops.
LinearGradientBrush myHorizontalGradient = new LinearGradientBrush();
myHorizontalGradient.StartPoint = new Point(0, 0.5);
myHorizontalGradient.EndPoint = new Point(1, 0.5);
myHorizontalGradient.GradientStops.Add(new GradientStop(Colors.Yellow, 0.0));
myHorizontalGradient.GradientStops.Add(new GradientStop(Colors.Red, 0.25));
myHorizontalGradient.GradientStops.Add(new GradientStop(Colors.Blue, 0.75));
myHorizontalGradient.GradientStops.Add(new GradientStop(Colors.LimeGreen, 1.0));
// Define material and apply to the mesh geometries.
DiffuseMaterial myMaterial = new DiffuseMaterial(myHorizontalGradient);
myGeometryModel.Material = myMaterial;
// Apply multiple transformations to the object. In this sample, a rotation and scale
// transform is applied.
// Create and apply a transformation that rotates the object.
RotateTransform3D myRotateTransform3D = new RotateTransform3D();
AxisAngleRotation3D myAxisAngleRotation3d = new AxisAngleRotation3D();
myAxisAngleRotation3d.Axis = new Vector3D(0,3,0);
myAxisAngleRotation3d.Angle = 40;
myRotateTransform3D.Rotation = myAxisAngleRotation3d;
// Add the rotation transform to a Transform3DGroup
Transform3DGroup myTransform3DGroup = new Transform3DGroup();
myTransform3DGroup.Children.Add(myRotateTransform3D);
// Create and apply a scale transformation that stretches the object along the local x-axis
// by 200 percent and shrinks it along the local y-axis by 50 percent.
ScaleTransform3D myScaleTransform3D = new ScaleTransform3D();
myScaleTransform3D.ScaleX = 2;
myScaleTransform3D.ScaleY = 0.5;
myScaleTransform3D.ScaleZ = 1;
// Add the scale transform to the Transform3DGroup.
myTransform3DGroup.Children.Add(myScaleTransform3D);
// Set the Transform property of the GeometryModel to the Transform3DGroup which includes
// both transformations. The 3D object now has two Transformations applied to it.
myGeometryModel.Transform = myTransform3DGroup;
// Add the geometry model to the model group.
myModel3DGroup.Children.Add(myGeometryModel);
// Add the group of models to the ModelVisual3d.
myModelVisual3D.Content = myModel3DGroup;
myViewport3D.Children.Add(myModelVisual3D);
// Apply the viewport to the page so it will be rendered.
this.Content = myViewport3D;
}
}
}
Imports System.Windows
Imports System.Windows.Controls
Imports System.Windows.Media
Imports System.Windows.Media.Media3D
Namespace SDKSample
Partial Public Class MultipleTransformationsExample
Inherits Page
Public Sub New()
' Declare scene objects.
Dim myViewport3D As New Viewport3D()
Dim myModel3DGroup As New Model3DGroup()
Dim myGeometryModel As New GeometryModel3D()
Dim myModelVisual3D As New ModelVisual3D()
' Defines the camera used to view the 3D object. In order to view the 3D object,
' the camera must be positioned and pointed such that the object is within view
' of the camera.
Dim myPCamera As New PerspectiveCamera()
' Specify where in the 3D scene the camera is.
myPCamera.Position = New Point3D(0, 0, 2)
' Specify the direction that the camera is pointing.
myPCamera.LookDirection = New Vector3D(0, 0, -1)
' Define camera's horizontal field of view in degrees.
myPCamera.FieldOfView = 60
' Asign the camera to the viewport
myViewport3D.Camera = myPCamera
' Define the lights cast in the scene. Without light, the 3D object cannot
' be seen. Note: to illuminate an object from additional directions, create
' additional lights.
Dim myDirectionalLight As New DirectionalLight()
myDirectionalLight.Color = Colors.White
myDirectionalLight.Direction = New Vector3D(-0.61, -0.5, -0.61)
myModel3DGroup.Children.Add(myDirectionalLight)
' The geometry specifes the shape of the 3D plane. In this sample, a flat sheet
' is created.
Dim myMeshGeometry3D As New MeshGeometry3D()
' Create a collection of normal vectors for the MeshGeometry3D.
Dim myNormalCollection As New Vector3DCollection()
myNormalCollection.Add(New Vector3D(0,0,1))
myNormalCollection.Add(New Vector3D(0,0,1))
myNormalCollection.Add(New Vector3D(0,0,1))
myNormalCollection.Add(New Vector3D(0,0,1))
myNormalCollection.Add(New Vector3D(0,0,1))
myNormalCollection.Add(New Vector3D(0,0,1))
myMeshGeometry3D.Normals = myNormalCollection
' Create a collection of vertex positions for the MeshGeometry3D.
Dim myPositionCollection As New Point3DCollection()
myPositionCollection.Add(New Point3D(-0.5, -0.5, 0.5))
myPositionCollection.Add(New Point3D(0.5, -0.5, 0.5))
myPositionCollection.Add(New Point3D(0.5, 0.5, 0.5))
myPositionCollection.Add(New Point3D(0.5, 0.5, 0.5))
myPositionCollection.Add(New Point3D(-0.5, 0.5, 0.5))
myPositionCollection.Add(New Point3D(-0.5, -0.5, 0.5))
myMeshGeometry3D.Positions = myPositionCollection
' Create a collection of texture coordinates for the MeshGeometry3D.
Dim myTextureCoordinatesCollection As New PointCollection()
myTextureCoordinatesCollection.Add(New Point(0, 0))
myTextureCoordinatesCollection.Add(New Point(1, 0))
myTextureCoordinatesCollection.Add(New Point(1, 1))
myTextureCoordinatesCollection.Add(New Point(1, 1))
myTextureCoordinatesCollection.Add(New Point(0, 1))
myTextureCoordinatesCollection.Add(New Point(0, 0))
myMeshGeometry3D.TextureCoordinates = myTextureCoordinatesCollection
' Create a collection of triangle indices for the MeshGeometry3D.
Dim myTriangleIndicesCollection As New Int32Collection()
myTriangleIndicesCollection.Add(0)
myTriangleIndicesCollection.Add(1)
myTriangleIndicesCollection.Add(2)
myTriangleIndicesCollection.Add(3)
myTriangleIndicesCollection.Add(4)
myTriangleIndicesCollection.Add(5)
myMeshGeometry3D.TriangleIndices = myTriangleIndicesCollection
' Apply the mesh to the geometry model.
myGeometryModel.Geometry = myMeshGeometry3D
' The material specifies the material applied to the 3D object. In this sample a
' linear gradient covers the surface of the 3D object.
' Create a horizontal linear gradient with four stops.
Dim myHorizontalGradient As New LinearGradientBrush()
myHorizontalGradient.StartPoint = New Point(0, 0.5)
myHorizontalGradient.EndPoint = New Point(1, 0.5)
myHorizontalGradient.GradientStops.Add(New GradientStop(Colors.Yellow, 0.0))
myHorizontalGradient.GradientStops.Add(New GradientStop(Colors.Red, 0.25))
myHorizontalGradient.GradientStops.Add(New GradientStop(Colors.Blue, 0.75))
myHorizontalGradient.GradientStops.Add(New GradientStop(Colors.LimeGreen, 1.0))
' Define material and apply to the mesh geometries.
Dim myMaterial As New DiffuseMaterial(myHorizontalGradient)
myGeometryModel.Material = myMaterial
' Apply multiple transformations to the object. In this sample, a rotation and scale
' transform is applied.
' Create and apply a transformation that rotates the object.
Dim myRotateTransform3D As New RotateTransform3D()
Dim myAxisAngleRotation3d As New AxisAngleRotation3D()
myAxisAngleRotation3d.Axis = New Vector3D(0,3,0)
myAxisAngleRotation3d.Angle = 40
myRotateTransform3D.Rotation = myAxisAngleRotation3d
' Add the rotation transform to a Transform3DGroup
Dim myTransform3DGroup As New Transform3DGroup()
myTransform3DGroup.Children.Add(myRotateTransform3D)
' Create and apply a scale transformation that stretches the object along the local x-axis
' by 200 percent and shrinks it along the local y-axis by 50 percent.
Dim myScaleTransform3D As New ScaleTransform3D()
myScaleTransform3D.ScaleX = 2
myScaleTransform3D.ScaleY = 0.5
myScaleTransform3D.ScaleZ = 1
' Add the scale transform to the Transform3DGroup.
myTransform3DGroup.Children.Add(myScaleTransform3D)
' Set the Transform property of the GeometryModel to the Transform3DGroup which includes
' both transformations. The 3D object now has two Transformations applied to it.
myGeometryModel.Transform = myTransform3DGroup
' Add the geometry model to the model group.
myModel3DGroup.Children.Add(myGeometryModel)
' Add the group of models to the ModelVisual3d.
myModelVisual3D.Content = myModel3DGroup
myViewport3D.Children.Add(myModelVisual3D)
' Apply the viewport to the page so it will be rendered.
Me.Content = myViewport3D
End Sub
End Class
End Namespace
関連項目
GitHub で Microsoft と共同作業する
このコンテンツのソースは GitHub にあります。そこで、issue や pull request を作成および確認することもできます。 詳細については、共同作成者ガイドを参照してください。
.NET Desktop feedback
フィードバック
以下は間もなく提供いたします。2024 年を通じて、コンテンツのフィードバック メカニズムとして GitHub の issue を段階的に廃止し、新しいフィードバック システムに置き換えます。 詳細については、「https://aka.ms/ContentUserFeedback」を参照してください。
フィードバックの送信と表示