다음을 통해 공유


Microsoft.PowerShell.Commands Namespace

Classes

AddComputerCommand

Adds the specified computer(s) to the Domain or Work Group. If the account does not already exist on the domain, it also creates one (see notes for implementation details). If the computer is already joined to a domain, it can be moved to a new domain (see notes for implementation details).

AddContentCommand

A command that appends the specified content to the item at the specified path.

AddHistoryCommand

This class Implements the add-history command.

AddMemberCommand

This class implements get-member command.

AddPSSnapinCommand

Class that implements add-pssnapin cmdlet.

AddTypeCommand

Adds a new type to the Application Domain. This version is based on CodeAnalysis (Roslyn).

AddTypeCommandBase

Base class that contains logic for Add-Type cmdlet based on

  • CodeDomProvider
  • CodeAnalysis(Roslyn)
AddTypeCompilerError

Compile error or warning.

AliasProvider

This provider is the data accessor for shell aliases. It uses the SessionStateProviderBase as the base class to produce a view on session state data.

AliasProviderDynamicParameters

The dynamic parameter object for the AliasProvider SetItem and NewItem commands.

BaseCsvWritingCommand

This class implements the base for exportcsv and converttocsv commands.

BasicHtmlWebResponseObject

Response object for html content without DOM parsing.

ByteCollection

ByteCollection is used as a wrapper class for the collection of bytes.

CatalogCommandsBase

Defines the base class from which all catalog commands are derived.

CertificateNotFoundException

Defines the exception thrown by the certificate provider when the specified X509 certificate cannot be located.

CertificateProvider

Defines the implementation of a Certificate Store Provider. This provider allows for stateless namespace navigation of the computer's certificate store.

CertificateProviderItemNotFoundException

Defines the base class for exceptions thrown by the certificate provider when the specified item cannot be located.

CertificateStoreLocationNotFoundException

Defines the exception thrown by the certificate provider when the specified X509 store location cannot be located.

CertificateStoreNotFoundException

Defines the exception thrown by the certificate provider when the specified X509 store cannot be located.

CheckpointComputerCommand

Creates the Restore Point for the Local computer

ClearContentCommand

A command that appends the specified content to the item at the specified path.

ClearEventLogCommand

This class implements the Clear-EventLog command

ClearHistoryCommand

This Class implements the Clear History cmdlet

ClearItemCommand

Clears an item at the specified location.

ClearItemPropertyCommand

A command to clear the value of a property of an item at a specified path.

ClearRecycleBinCommand

Defines the implementation of the 'Clear-RecycleBin' cmdlet. This cmldet clear all files in the RecycleBin for the given DriveLetter. If not DriveLetter is specified, then the RecycleBin for all drives are cleared.

ClearVariableCommand

This class implements set-variable command.

CommonRunspaceCommandBase

Abstract class that defines common Runspace Command parameters.

CompareObjectCommand
CompleteTransactionCommand

A command that commits a transaction.

ComputerChangeInfo

The object returned by SAM Computer cmdlets representing the status of the target machine.

ComputerInfo

The ComputerInfo class is output to the PowerShell pipeline.

ConnectPSSessionCommand

This cmdlet connects PS sessions (RemoteRunspaces) that are in the Disconnected state and returns those PS session objects in the Opened state. One or more session objects can be specified for connecting, or a remote computer name can be specified and in this case all disconnected remote runspaces found on the remote computer will be be connected and PSSession objects created on the local machine.

The cmdlet can be used in the following ways:

Connect a PS session object: > $session = New-PSSession serverName > Disconnect-PSSession $session > Connect-PSSession $session

Connect a PS session by name: > Connect-PSSession $session.Name

Connect a PS session by Id: > Connect-PSSession $session.Id

Connect a collection of PS session: > Get-PSSession | Connect-PSSession

Connect all disconnected PS sessions on a remote computer > Connect-PSSession serverName

ConsoleCmdletsBase

Base class for all the Console related cmdlets.

ConsoleColorCmdlet

Base class for a variety of commandlets that take color parameters.

ContentCommandBase

The base class for the */content commands.

ControlPanelItem

Represent a control panel item

ControlPanelItemBaseCommand

This class implements the base for ControlPanelItem commands

ConvertFromCsvCommand

Implements ConvertFrom-Csv command.

ConvertFromJsonCommand

The ConvertFrom-Json command. This command converts a Json string representation to a JsonObject.

ConvertFromMarkdownCommand

Converts a Markdown string to a MarkdownInfo object. The conversion can be done into a HTML text or VT100 encoding string.

ConvertFromSddlStringCommand
ConvertFromSecureStringCommand

Defines the implementation of the 'ConvertFrom-SecureString' cmdlet. This cmdlet exports a new SecureString -- one that represents text that should be kept confidential. The text is encrypted for privacy when being used, and deleted from computer memory when no longer needed. When no key is specified, the command uses the DPAPI to encrypt the string. When a key is specified, the command uses the AES algorithm to encrypt the string.

ConvertFromStringDataCommand

Class comment.

ConvertFromToSecureStringCommandBase

Defines the base class from which all SecureString import and export commands are derived.

ConvertPathCommand

A command to convert a drive qualified or provider qualified path to a provider internal path.

ConvertToCsvCommand

Implements ConvertTo-Csv command.

ConvertToHtmlCommand

Class comment.

ConvertToJsonCommand

The ConvertTo-Json command. This command converts an object to a Json string representation.

ConvertToSecureStringCommand

Defines the implementation of the 'ConvertTo-SecureString' cmdlet. This cmdlet imports a new SecureString from encrypted data -- one that represents text that should be kept confidential. The text is encrypted for privacy when being used, and deleted from computer memory when no longer needed. When no key is specified, the command uses the DPAPI to decrypt the data. When a key is specified, the command uses the AES algorithm to decrypt the data.

ConvertToXmlCommand

Implementation for the convertto-xml command.

CopyItemCommand

Copies a specified item to a new location using the namespace providers.

CopyItemPropertyCommand

A command to copy a property on an item.

CoreCommandBase

The base command for the core commands.

CoreCommandWithCredentialsBase

The base class for core commands to extend when they require credentials to be passed as parameters.

DebugJobCommand

This cmdlet takes a Job object and checks to see if it is debuggable. If it is debuggable then it breaks into the job debugger in step mode. If it is not debuggable then it is treated as a parent job and each child job is checked if it is debuggable and if it is will break into its job debugger in step mode. For multiple debuggable child jobs, each job execution will be halted and the debugger will step to each job execution point sequentially.

When a job is debugged its output data is written to host and the executing job script will break into the host debugger, in step mode, at the next stoppable execution point.

DebugProcessCommand

This class implements the Debug-process command.

DebugRunspaceCommand

This cmdlet takes a Runspace object and checks to see if it is debuggable (i.e, if it is running a script or is currently stopped in the debugger. If it is debuggable then it breaks into the Runspace debugger in step mode.

DeviceGuard

Provides information about Device Guard

DisableComputerRestoreCommand

This cmdlet is to Disable Computer Restore points.

DisableExperimentalFeatureCommand

Implements Enable-ExperimentalFeature cmdlet.

DisablePSBreakpointCommand

This class implements Disable-PSBreakpoint.

DisablePSRemotingCommand

Disable-PSRemoting cmdlet Only disable the network access to the Session Configuration. The local access is still enabled

DisablePSSessionConfigurationCommand
DisableRunspaceDebugCommand

This cmdlet disables Runspace debugging in selected Runspaces.

DisconnectPSSessionCommand

This cmdlet disconnects PS sessions (RemoteRunspaces) that are in the Opened state and returns the PS session objects in the Disconnected state. While the PS sessions are in the disconnected state no commands can be invoked on them and any existing remote running commands will not return any data. The PS sessions can be reconnected by using the Connect-PSSession cmdlet.

The cmdlet can be used in the following ways:

Disconnect a PS session object: > $session = New-PSSession serverName > Disconnect-PSSession $session

Disconnect a PS session by name: > Disconnect-PSSession -Name $session.Name

Disconnect a PS session by Id: > Disconnect-PSSession -Id $session.Id

Disconnect a collection of PS sessions: > Get-PSSession | Disconnect-PSSession

DnsNameProperty

class for DNSNameList

DriveMatchingCoreCommandBase

Base class for Drive commands that need to glob drives on both the drive name and the provider name.

EnableComputerRestoreCommand

Cmdlet for Enable-ComputerRestore

EnableDisableExperimentalFeatureCommandBase

Base class for Enable/Disable-ExperimentalFeature cmdlet.

EnableExperimentalFeatureCommand

Implements Enable-ExperimentalFeature cmdlet.

EnablePSBreakpointCommand

This class implements Enable-PSBreakpoint.

EnablePSRemotingCommand
EnablePSSessionConfigurationCommand

Class implementing Enable-PSSessionConfiguration cmdlet

EnableRunspaceDebugCommand

This cmdlet enables debugging for selected runspaces in the current or specified process.

EnhancedKeyUsageProperty

class for ekulist

EnterPSHostProcessCommand

This cmdlet enters into an interactive session with the specified local process by creating a remote runspace to the process and pushing it on the current PSHost. If the selected process does not contain PowerShell then an error message will result. If the current user does not have sufficient privileges to attach to the selected process then an error message will result.

EnterPSSessionCommand

Enter-PSSession cmdlet.

EnvironmentProvider

This provider is the data accessor for environment variables. It uses the SessionStateProviderBase as the base class to produce a view on session state data.

ExitPSHostProcessCommand

This cmdlet exits an interactive session with a local process.

ExitPSSessionCommand

Exit-PSSession cmdlet.

ExperimentalFeatureNameCompleter

Provides argument completion for ExperimentalFeature names.

ExportAliasCommand

The implementation of the "export-alias" cmdlet.

ExportClixmlCommand

Implementation for the Export-Clixml command.

ExportConsoleCommand

Class that implements export-console cmdlet.

ExportCounterCommand
ExportCsvCommand

Implementation for the Export-Csv command.

ExportFormatDataCommand

Cmdlet used to write a collection of formatting directives to an XML file.

ExportModuleMemberCommand

Implements a cmdlet that loads a module.

ExportPSSessionCommand

This class implements Export-PSSession cmdlet. Spec: TBD.

FileHashInfo

FileHashInfo class contains information about a file hash.

FileSystemClearContentDynamicParameters

Defines the dynamic parameters used by the Clear-Content cmdlet.

FileSystemContentDynamicParametersBase

Defines the dynamic parameters used by both the content reader and writer.

FileSystemContentReaderDynamicParameters

Defines the dynamic parameters used by the get-content cmdlet.

FileSystemContentWriterDynamicParameters

Defines the dynamic parameters used by the set-content and add-content cmdlets.

FileSystemItemProviderDynamicParameters

Provides the dynamic parameters for test-path on the file system.

FileSystemProvider

Defines the implementation of a File System Provider. This provider allows for stateless namespace navigation of the file system.

FileSystemProviderGetItemDynamicParameters

Provides the dynamic parameters for Get-Item on the file system.

FileSystemProviderRemoveItemDynamicParameters

Provides the dynamic parameters for Remove-Item on the file system.

ForEachObjectCommand

Implements a cmdlet that applies a script block to each element of the pipeline.

FormatCustomCommand

Implementation for the Format-Custom command. It just calls the formatting engine on complex shape.

FormatDefaultCommand

Implementation for the format-default command.

FormatHex

Displays the hexadecimal equivalent of the input data.

FormatListCommand

Implementation for the Format-List command.

FormatTableCommand

Implementation for the Format-Table command.

FormatWideCommand

Implementation for the Format-Wide command.

FormObject

FormObject used in HtmlWebResponseObject.

FormObjectCollection

FormObjectCollection used in HtmlWebResponseObject.

FunctionProvider

This provider is the data accessor for shell functions. It uses the SessionStateProviderBase as the base class to produce a view on session state data.

FunctionProviderDynamicParameters

The dynamic parameter object for the FunctionProvider SetItem and NewItem commands.

GenericMeasureInfo

Class output by Measure-Object.

GenericObjectMeasureInfo

Class output by Measure-Object.

GetAclCommand

Defines the implementation of the 'get-acl' cmdlet. This cmdlet gets the security descriptor of an item at the specified path.

GetAliasCommand

The implementation of the "get-alias" cmdlet.

GetAuthenticodeSignatureCommand

Defines the implementation of the 'get-AuthenticodeSignature' cmdlet. This cmdlet extracts the digital signature from the given file.

GetChildItemCommand

The get-childitem command class. This command lists the contents of a container.

GetClipboardCommand

Defines the implementation of the 'Get-Clipboard' cmdlet. This cmdlet get the content from system clipboard.

GetCmsMessageCommand

Defines the implementation of the 'Get-CmsMessage' cmdlet.

This cmdlet retrieves information about an encrypted CMS message.

GetCommandCommand

The get-command cmdlet. It uses the command discovery APIs to find one or more commands of the given name. It returns an instance of CommandInfo for each command that is found.

GetComputerInfoCommand

The Get=ComputerInfo cmdlet gathers and reports information about a computer.

GetComputerRestorePointCommand

This cmdlet is to Get Computer Restore points.

GetContentCommand

A command to get the content of an item at a specified path.

GetControlPanelItemCommand

Get all control panel items that is available in the "All Control Panel Items" category

GetCounterCommand

Class that implements the Get-Counter cmdlet.

GetCredentialCommand

Defines the implementation of the 'get-credential' cmdlet. The get-credential Cmdlet establishes a credential object called a PSCredential, by pairing a given username with a prompted password. That credential object can then be used for other operations involving security.

GetCultureCommand

Returns: - the thread's current culture - culture by name - list of all supported cultures.

GetDateCommand

Implementation for the get-date command.

GetErrorCommand

Class for Get-Error implementation.

GetEventCommand

Gets events from the event queue.

GetEventLogCommand

This class implements the Get-EventLog command

GetEventPSSnapIn
GetEventSubscriberCommand

Lists all event subscribers.

GetExecutionPolicyCommand

Defines the implementation of the 'Get-ExecutionPolicy' cmdlet. This cmdlet gets the effective execution policy of the shell.

In priority-order (highest priority first,) these come from:

  • Machine-wide Group Policy
  • Current-user Group Policy
  • Current session preference
  • Current user machine preference
  • Local machine preference.
GetExperimentalFeatureCommand

Implements Get-ExperimentalFeature cmdlet.

GetFileHashCommand

This class implements Get-FileHash.

GetFormatDataCommand

Gets formatting information from the loading format information database.

GetHelpCodeMethods

Helper methods used as powershell extension from a types file.

GetHelpCommand

This class implements get-help command.

GetHistoryCommand

This class Implements the get-history command.

GetHostCommand

Writes the PSHost object to the success stream.

GetHotFixCommand

Cmdlet for Get-Hotfix Proxy

GetItemCommand

Gets the specified item using the namespace providers.

GetItemPropertyCommand

A command to get the property of an item at a specified path.

GetItemPropertyValueCommand

A command to get the property value of an item at a specified path.

GetJobCommand

Cmdlet to get available list of results.

GetLocationCommand

The get-location command class. This command does things like list the contents of a container, get an item at a given path, get the current working directory, etc.

GetMarkdownOptionCommand

Implements the cmdlet for getting the Markdown options that are set.

GetMemberCommand

This class implements get-member command.

GetModuleCommand

Implements a cmdlet that gets the list of loaded modules...

GetPfxCertificateCommand

Defines the implementation of the get-pfxcertificate cmdlet.

GetProcessCommand

This class implements the get-process command.

GetPSBreakpointCommand

This class implements Get-PSBreakpoint.

GetPSCallStackCommand

This class implements Get-PSCallStack.

GetPSDriveCommand

Gets a specified or listing of drives that are mounted in PowerShell namespace.

GetPSHostProcessInfoCommand

This cmdlet returns a collection of PSHostProcessInfo objects containing process and AppDomain name information for processes that have PowerShell loaded.

GetPSProviderCommand

Gets a core command provider by name.

GetPSSessionCapabilityCommand

Gets the capabilities of a constrained endpoint on the local machine for a specific user.

GetPSSessionCommand

This cmdlet is used to retrieve runspaces from the global cache and write it to the pipeline. The runspaces are wrapped and returned as PSSession objects.

The cmdlet can be used in the following ways:

List all the available runspaces get-pssession

Get the PSSession from session name get-pssession -Name sessionName

Get the PSSession for the specified ID get-pssession -Id sessionId

Get the PSSession for the specified instance Guid get-pssession -InstanceId sessionGuid

Get PSSessions from remote computer. Optionally filter on state, session instanceid or session name. get-psession -ComputerName computerName -StateFilter Disconnected

Get PSSessions from virtual machine. Optionally filter on state, session instanceid or session name. get-psession -VMName vmName -Name sessionName

Get PSSessions from container. Optionally filter on state, session instanceid or session name. get-psession -ContainerId containerId -InstanceId instanceId.

GetPSSessionConfigurationCommand

Class implemeting Get-PSSessionConfiguration

GetPSSnapinCommand

Class that implements get-pssnapin cmdlet.

GetRandomCommand

This class implements Get-Random cmdlet.

GetRandomCommandBase

This class implements base class for Get-Random and Get-SecureRandom cmdlets.

GetRunspaceCommand

This cmdlet returns runspaces in the PowerShell session.

GetRunspaceDebugCommand

This cmdlet returns a PSRunspaceDebug object for each found Runspace object.

GetSecureRandomCommand

This class implements Get-SecureRandom cmdlet.

GetServiceCommand

This class implements the get-service command

GetTimeZoneCommand

A cmdlet to retrieve time zone information.

GetTraceSourceCommand

A cmdlet that gets the TraceSource instances that are instantiated in the process.

GetTransactionCommand

A command that gets the active transaction.

GetTypeDataCommand

Get-TypeData cmdlet.

GetUICultureCommand

Returns the thread's current UI culture.

GetUniqueCommand
GetUptimeCommand

This class implements Get-Uptime.

GetVariableCommand

Implements get-variable command.

GetVerbCommand

Implementation of the Get Verb Command.

GetWinEventCommand

Class that implements the Get-WinEvent cmdlet.

GetWmiObjectCommand

A command to get WMI Objects

GroupInfo

Emitted by Group-Object.

GroupInfoNoElement

Emitted by Group-Object when the NoElement option is true.

GroupObjectCommand

Group-Object implementation.

HashCmdletBase

Base Cmdlet for cmdlets which deal with crypto hashes.

HelpCategoryInvalidException

The exception that is thrown when there is no help category matching a specific input string.

HelpNotFoundException

The exception that is thrown when there is no help found for a topic.

HistoryInfo

Contains information about a single history entry.

HotFix

Describes a Quick-Fix Engineering update

HtmlWebResponseObject

Response object for html content

HttpResponseException

Exception class for webcmdlets to enable returning HTTP error response.

ImplicitRemotingCommandBase

Base class for implicit remoting cmdlets.

ImportAliasCommand

The implementation of the "import-alias" cmdlet.

ImportClixmlCommand

Implements Import-Clixml command.

ImportCounterCommand
ImportCsvCommand

Implements Import-Csv command.

ImportLocalizedData

The implementation of the "import-localizeddata" cmdlet.

ImportModuleCommand

Implements a cmdlet that loads a module.

ImportPowerShellDataFileCommand

This class implements Import-PowerShellDataFile command.

ImportPSSessionCommand

This class implements Import-PSSession cmdlet. Spec: http://cmdletdesigner/SpecViewer/Default.aspx?Project=PowerShell&Cmdlet=Import-Command .

ImportWorkflowCommand

A cmdlet to load WF Workflows, expressed as XAML and wrap them in functions.

InternalSymbolicLinkLinkCodeMethods

Class to find the symbolic link target.

InvokeCommandCommand

This cmdlet executes a specified script block on one or more remote machines. The expression or command, as they will be interchangeably called, need to be contained in a script block. This is to ensure two things: 1. The expression that the user has entered is syntactically correct (its compiled) 2. The scriptblock can be converted to a powershell object before transmitting it to the remote end so that it can be run on constrained runspaces in the no language mode

In general, the command script block is executed as if the user had typed it at the command line. The output of the command is the output of the cmdlet. However, since invoke-command is a cmdlet, it will unravel its output: - if the command outputs an empty array, invoke-command will output $null - if the command outputs a single-element array, invoke-command will output that single element.

Additionally, the command will be run on a remote system.

This cmdlet can be called in the following different ways:

Execute a command in a remote machine by specifying the command and machine name invoke-command -Command {get-process} -computername "server1"

Execute a command in a set of remote machines by specifying the command and the list of machines $servers = 1..10 | ForEach-Object {"Server${_}"} invoke-command -command {get-process} -computername $servers

Create a new runspace and use it to execute a command on a remote machine $runspace = New-PSSession -computername "Server1" $credential = get-credential "user01" invoke-command -command {get-process} -Session $runspace -credential $credential

Execute a command in a set of remote machines by specifying the complete uri for the machines $uri = "http://hostedservices.microsoft.com/someservice" invoke-command -command { get-mail } - uri $uri

Create a collection of runspaces and use it to execute a command on a set of remote machines

$serveruris = 1..8 | ForEach-Object {"http://Server${_}/"}
$runspaces = New-PSSession -URI $serveruris
invoke-command -command {get-process} -Session $runspaces

The cmdlet can also be invoked in the asynchronous mode.

invoke-command -command {get-process} -computername $servers -asjob

When the -AsJob switch is used, the cmdlet will emit an PSJob Object. The user can then use the other job cmdlets to work with this object

Note there are two types of errors: 1. Remote invocation errors 2. Local errors.

Both types of errors will be available when the user invokes a receive operation.

The PSJob object has its own throttling mechanism. The result object will be stored in a global cache. If a user wants to retrieve data from the result object the user should be able to do so using the Receive-PSJob cmdlet

The following needs to be noted about exception/error reporting in this cmdlet: The exception objects that are thrown by underlying layers will be written as errors, to avoid stopping the entire cmdlet in case of multi-computername or multi-Session usage (for consistency, this is true even when done using one computername or runspace)

Only one expression may be executed at a time in any single runspace. Attempts to invoke an expression on a runspace that is already executing an expression shall return an error with ErrorCategory ResourceNotAvailable and notify the user that the runspace is currently busy.

Some additional notes:

  • invoke-command issues a single scriptblock to the computer or runspace. If a runspace is specified and a command is already running in that runspace, then the second command will fail
  • The files necessary to execute the command (cmdlets, scripts, data files, etc) must be present on the remote system; the cmdlet is not responsible for copying them over
  • The entire input stream is collected and sent to the remote system before execution of the command begins (no input streaming)
  • Input shall be available as $input. Remote Runspaces must reference $input explicitly (input will not automatically be available)
  • Output from the command streams back to the client as it is available
  • Ctrl-C and pause/resume are supported; the client will send a message to the remote powershell instance.
  • By default if no -credential is specified, the host will impersonate the current user on the client when executing the command
  • The standard output of invoke-command is the output of the last element of the remote pipeline, with some extra properties added
  • If -Shell is not specified, then the value of the environment variable DEFAULTREMOTESHELLNAME is used. If this is not set, then "Microsoft.PowerShell" is used.
InvokeExpressionCommand

Class implementing Invoke-Expression.

InvokeHistoryCommand

This class implements the Invoke-History command.

InvokeItemCommand

Invokes an item at the specified location.

InvokeRestMethodCommand

The Invoke-RestMethod command This command makes an HTTP or HTTPS request to a web service, and returns the response in an appropriate way. Intended to work against the wide spectrum of "RESTful" web services currently deployed across the web.

InvokeWebRequestCommand

The Invoke-WebRequest command. This command makes an HTTP or HTTPS request to a web server and returns the results.

InvokeWmiMethod

A command to Invoke WMI Method

ItemPropertyCommandBase

The base class for the */property commands.

JobCmdletBase

This is the base class for job cmdlet and contains some helper functions.

JoinPathCommand

A command that adds the parent and child parts of a path together with the appropriate path separator.

JsonObject

JsonObject class.

LimitEventLogCommand

This class implements the Limit-EventLog command

MatchInfo

The object returned by select-string representing the result of a match.

MatchInfoContext

Context information about a match.

MeasureCommandCommand

Implements a cmdlet that applies a script block to each element of the pipeline.

MeasureInfo

Class output by Measure-Object.

MeasureObjectCommand

Measure object cmdlet.

MemberDefinition

Class with member information that this cmdlet writes to the pipeline.

ModuleCmdletBase

This is the base class for some of the module cmdlets. It contains a number of utility functions for these classes.

ModuleSpecification

Represents module specification written in a module manifest (i.e. in RequiredModules member/field).

Module manifest allows 2 forms of module specification:

  1. string - module name
  2. hashtable - [string]ModuleName (required) + [Version]ModuleVersion/RequiredVersion (required) + [Guid]GUID (optional)

so we have a constructor that takes a string and a constructor that takes a hashtable (so that LanguagePrimitives.ConvertTo can cast a string or a hashtable to this type)

MoveItemCommand

Moves an item from the specified location to the specified destination using the namespace providers.

MoveItemPropertyCommand

A command to move a property on an item to another item.

MultipleServiceCommandBase

This class implements the base for service commands which can operate on multiple services

NetworkAdapter

Provides information about a network adapter

NewAliasCommand

The implementation of the "new-alias" cmdlet.

NewEventCommand

Generates a new event notification.

NewEventLogCommand

This cmdlet creates the new event log .This cmdlet can also be used to configure a new source for writing entries to an event log on the local computer or a remote computer. You can create an event source for an existing event log or a new event log. When you create a new source for a new event log, the system registers the source for that log, but the log is not created until the first entry is written to it. The operating system stores event logs as files. The associated file is stored in the %SystemRoot%\System32\Config directory on the specified computer. The file name is set by appending the first 8 characters of the Log property with the ".evt" file name extension. You can register the event source with localized resource file(s) for your event category and message strings. Your application can write event log entries using resource identifiers, rather than specifying the actual string. You can register a separate file for event categories, messages and parameter insertion strings, or you can register the same resource file for all three types of strings.

NewFileCatalogCommand

Defines the implementation of the 'New-FileCatalog' cmdlet. This cmdlet generates the catalog for File or Folder

NewGuidCommand

The implementation of the "new-guid" cmdlet.

NewItemCommand

Creates the specified item using the namespace providers.

NewItemPropertyCommand

A command to create a new property on an object.

NewModuleCommand

Implements a cmdlet that creates a dynamic module from a scriptblock..

NewModuleManifestCommand

Cmdlet to create a new module manifest file.

NewObjectCommand

Create a new .net object

NewPSDriveCommand

Mounts a drive in PowerShell runspace.

NewPSRoleCapabilityFileCommand

New-PSRoleCapabilityFile command implementation

Creates a role capability file suitable for use in a Role Capability (which can be referenced in a Session Configuration file)

NewPSSessionCommand

This cmdlet establishes a new Runspace either on the local machine or on the specified remote machine(s). The runspace established can be used to invoke expressions remotely.

The cmdlet can be used in the following ways:

Open a local runspace $rs = New-PSSession

Open a runspace to a remote system. $rs = New-PSSession -Machine PowerShellWorld

Create a runspace specifying that it is globally scoped. $global:rs = New-PSSession -Machine PowerShellWorld

Create a collection of runspaces $runspaces = New-PSSession -Machine PowerShellWorld,PowerShellPublish,PowerShellRepo

Create a set of Runspaces using the Secure Socket Layer by specifying the URI form. This assumes that an shell by the name of E12 exists on the remote server. $serverURIs = 1..8 | ForEach-Object { "SSL://server${_}:443/E12" } $rs = New-PSSession -URI $serverURIs

Create a runspace by connecting to port 8081 on servers s1, s2 and s3 $rs = New-PSSession -computername s1,s2,s3 -port 8081

Create a runspace by connecting to port 443 using ssl on servers s1, s2 and s3 $rs = New-PSSession -computername s1,s2,s3 -port 443 -useSSL

Create a runspace by connecting to port 8081 on server s1 and run shell named E12. This assumes that a shell by the name E12 exists on the remote server $rs = New-PSSession -computername s1 -port 8061 -ShellName E12.

NewPSSessionConfigurationFileCommand

New-PSSessionConfigurationFile command implementation

See Declarative Initial Session State (DISC)

NewPSSessionOptionCommand

This class implements New-PSSessionOption cmdlet. Spec: TBD.

NewPSTransportOptionCommand

Command to create an object for WSManConfigurationOption.

NewPSWorkflowExecutionOptionCommand

Command to create an object for PSWorkflowExecutionOption

NewServiceCommand

This class implements the set-service command

NewTemporaryFileCommand

The implementation of the "New-TemporaryFile" cmdlet.

NewTimeSpanCommand

Implementation for the new-timespan command.

NewVariableCommand

Class implementing new-variable command.

NewWebServiceProxy

Cmdlet for new-WebService Proxy

NewWinEventCommand

Class that implements the New-WinEvent cmdlet. This cmdlet writes a new Etw event using the provider specified in parameter.

NounArgumentCompleter
ObjectBase

Base Cmdlet for object cmdlets that deal with Grouping, Sorting and Comparison.

ObjectCmdletBase

Base Cmdlet for cmdlets which deal with raw objects.

ObjectEventRegistrationBase

Base class for object-based event registration.

OrderObjectBase

Base Cmdlet for object cmdlets that deal with Ordering and Comparison.

OutDefaultCommand

Implementation for the out-default command this command it implicitly inject by the powershell host at the end of the pipeline as the default sink (display to console screen)

OutFileCommand

Implementation for the out-file command.

OutGridViewCommand

Implementation for the Out-GridView command.

OutHostCommand

Implementation for the out-host command.

OutLineOutputCommand

Implementation for the out-lineoutput command it provides a wrapper for the OutCommandInner class, which is the general purpose output command.

OutNullCommand

Null sink to absorb pipeline output.

OutPrinterCommand

Implementation for the out-printer command.

OutStringCommand

Implementation for the out-string command.

PassThroughContentCommandBase

The base class for the */content commands that also take a passthrough parameter.

PassThroughItemPropertyCommandBase

The base class for the */property commands that also take a passthrough parameter.

PopLocationCommand

The core command for pop-location. This is the equivalent of the popd command. It pops a container from the stack and sets the current location to that container.

ProcessBaseCommand

This class implements the base for process commands.

ProcessCommandException

Non-terminating errors occurring in the process noun commands.

Processor

Describes a processor on the computer

ProtectCmsMessageCommand

Defines the implementation of the 'Protect-CmsMessage' cmdlet.

This cmdlet generates a new encrypted CMS message given the recipient and content supplied.

PSBreakpointAccessorCommandBase

Base class for Get/Set-PSBreakpoint.

PSBreakpointCommandBase

Base class for PSBreakpoint cmdlets.

PSBreakpointCreationBase
PSBreakpointUpdaterCommandBase

Base class for Enable/Disable/Remove-PSBreakpoint.

PSEditionArgumentCompleter

PSEditionArgumentCompleter for PowerShell Edition names.

PSExecutionCmdlet

Base class for any cmdlet which has to execute a pipeline. The following cmdlets currently fall under this category: 1. Invoke-Expression 2. Start-PSJob.

PSHostProcessInfo

PowerShell host process information class.

PSPropertyExpression

PSPropertyExpression class. This class is used to get the names and/or values of properties on an object. A property expression can be constructed using either a wildcard expression string or a scriptblock to use to get the property value.

PSPropertyExpressionResult

Class that represents the results from evaluating a PSPropertyExpression against an object.

PSRemotingBaseCmdlet

Base class for any cmdlet which takes a -Session parameter or a -ComputerName parameter (along with its other associated parameters). The following cmdlets currently fall under this category: 1. New-PSSession 2. Invoke-Expression 3. Start-PSJob.

PSRemotingCmdlet

This class defines most of the common functionality used across remoting cmdlets.

It contains tons of utility functions which are used all across the remoting cmdlets.

PSRunspaceCmdlet

Base class for any cmdlet which operates on a runspace. The following cmdlets currently fall under this category: 1. Get-PSSession 2. Remove-PSSession 3. Disconnect-PSSession 4. Connect-PSSession.

PSRunspaceDebug

Runspace Debug Options class.

PSSessionConfigurationCommandBase

Base class for PSCustomShell commands Register-PSSessionConfiguration, Set-PSSessionConfiguration

PSSnapInCommandBase

Base class for all the pssnapin related cmdlets.

PSUserAgent

Construct the Useragent string.

PSWorkflowExecutionOption

This class is used to specify Workflow related options in the Register-PSSessionConfiguration

PushLocationCommand

The core command for setting/changing location and pushing it onto a location stack. This is the equivalent of the pushd command.

ReadHostCommand

Retrieves input from the host virtual console and writes it to the pipeline output.

ReceiveJobCommand

Cmdlet used for receiving results from job object. This cmdlet is intended to have a slightly different behavior in the following two cases: 1. The job object to receive results from is a PSRemotingJob In this case, the cmdlet can use two additional parameters to filter results - ComputerName and Runspace The parameters help filter out results for a specified computer or runspace from the job object

          $job = Start-PSJob -Command 'get-process' -ComputerName server1, server2
          Receive-PSJob -Job $job -ComputerName server1

          $job = Start-PSJob -Command 'get-process' -Session $r1, $r2
          Receive-PSJob -Job $job -Session $r1

    2. The job object to receive results is a PSJob (or derivative
       other than PSRemotingJob)
         In this case, the user cannot will use the location parameter
         to do any filtering and will not have ComputerName and Runspace
         parameters

         $job = Get-WMIObject '....' -AsJob
         Receive-PSJob -Job $job -Location "Server2"

         The following will result in an error:

         $job = Get-WMIObject '....' -AsJob
         Receive-PSJob -Job $job -ComputerName "Server2"
         The parameter ComputerName cannot be used with jobs which are
         not PSRemotingJob.
ReceivePSSessionCommand

This cmdlet connects a running command associated with a PS session and then directs the command output either: a) To Host. This is the synchronous mode of the cmdlet which won't return until the running command completes and all output data is received on the client. b) To a job object. This is the asynchronous mode of the cmdlet which will return immmediately providing the job object that is collecting the running command output data.

The running command becomes disconnected when the associated runspace is disconnected (via the Disconnect-PSSession cmdlet).

The associated runspace object must be in the Opened state (connected) before the running command can be connected. If the associated runspace object is in the disconnected state, it will first be connected before the running command is connected.

The user can specify how command output data is returned by using the public OutTarget enumeration (Host, Job). The default actions of this cmdlet is to always direct ouput to host unless a job object already exists on the client that is associated with the running command. In this case the existing job object is connected to the running command and returned.

The cmdlet can be used in the following ways:

Receive PS session data by session object > $session = New-PSSession serverName > $job1 = Invoke-Command $session { [script] } -asjob > Disconnect-PSSession $session > Connect-PSSession $session > Receive-PSSession $session // command output continues collecting at job object.

Receive PS session data by session Id > Receive-PSSession $session.Id

Receive PS session data by session instance Id > Receive-PSSession $session.InstanceId

Receive PS session data by session Name. Direct output to job > Receive-PSSession $session.Name

Receive a running command from a computer. > $job = Receive-PSSession -ComputerName ServerOne -Name SessionName -OutTarget Job

RegisterEngineEventCommand

Registers for an event coming from the engine.

RegisterObjectEventCommand

Registers for an event on an object.

RegisterPSSessionConfigurationCommand

Class implemeting Register-PSSessionConfiguration

RegisterWmiEventCommand

Registers for an event on an object.

RegistryProvider

Provider that provides access to Registry through cmdlets. This provider implements NavigationCmdletProvider, IPropertyCmdletProvider, IDynamicPropertyCmdletProvider,
ISecurityDescriptorCmdletProvider interfaces.

RegistryProviderSetItemDynamicParameter

Defines dynamic parameters for the registry provider

RemoveAliasCommand

The implementation of the "Remove-Alias" cmdlet.

RemoveComputerCommand

Removes the Specified Computer(s) from the relevant Domain or Work Group

RemoveEventCommand

Removes an event from the event queue.

RemoveEventLogCommand

This cmdlet is used to delete the specified event log from the specified computer. This can also be used to Clear the entries of the specified event log and also to unregister the Source associated with the eventlog.

RemoveItemCommand

Removes the specified item using the namespace providers.

RemoveItemPropertyCommand

A command to remove a property from an item.

RemoveJobCommand

This cmdlet removes the Job object from the runspace wide Job repository.

Once the Job object is removed, it will not be available through get-psjob command.

RemoveModuleCommand

Implements a cmdlet that gets the list of loaded modules...

RemovePSBreakpointCommand

This class implements Remove-PSBreakpoint.

RemovePSDriveCommand

Removes a drive that is mounted in the PowerShell runspace.

RemovePSSessionCommand

This cmdlet stops the runspace and frees the resources associated with that runspace. If any execution is in process in that runspace, it is stopped. Also, the runspace is removed from the global cache.

This cmdlet can be used in the following ways:

Remove the runspace specified $runspace = New-PSSession Remove-PSSession -remoterunspaceinfo $runspace

Remove the runspace specified (no need for a parameter name) $runspace = New-PSSession Remove-PSSession $runspace.

RemovePSSnapinCommand

Class that implements remove-pssnapin cmdlet.

RemoveServiceCommand
RemoveTypeDataCommand

Remove-TypeData cmdlet.

RemoveVariableCommand

The Remove-Variable cmdlet implementation.

RemoveWmiObject

A command to Remove WMI Object

RenameComputerChangeInfo

The object returned by Rename-Computer cmdlet representing the status of the target machine.

RenameComputerCommand

Renames a domain computer and its corresponding domain account or a workgroup computer. Use this command to rename domain workstations and local machines only. It cannot be used to rename Domain Controllers.

RenameItemCommand

Renames a specified item to a new name using the namespace providers.

RenameItemPropertyCommand

A command to rename a property of an item at a specified path.

ResetComputerMachinePasswordCommand

Resets the computer machine password used to authenticate with DCs.

ResolvePathCommand

A command to resolve PowerShell paths containing glob characters to PowerShell paths that match the glob strings.

RestartComputerCommand

Cmdlet to restart computer.

RestartComputerTimeoutException

This exception is thrown when the timeout expires before a computer finishes restarting

RestartServiceCommand

This class implements the restart-service command

RestoreComputerCommand

This cmdlet is to Restore Computer

ResumeJobCommand

This cmdlet resumes the jobs that are Job2. Errors are added for each Job that is not Job2.

ResumeServiceCommand

This class implements the resume-service command

SaveHelpCommand

This class implements the Save-Help cmdlet.

SecureStringCommandBase

Defines the base class from which all SecureString commands are derived.

SecurityDescriptorCommandsBase

Defines the base class from which all Security Descriptor commands are derived.

SecurityDescriptorInfo
SelectObjectCommand
SelectStringCommand

A cmdlet to search through strings and files for particular patterns.

SelectXmlCommand

This cmdlet is used to search an xml document based on the XPath Query.

SelectXmlInfo

The object returned by Select-Xml representing the result of a match.

SendAsTrustedIssuerProperty

class for SendAsTrustedIssuer

SendMailMessage

Implementation for the Send-MailMessage command.

ServiceBaseCommand

This class implements the base for service commands

ServiceCommandException

Non-terminating errors occurring in the service noun commands

ServiceOperationBaseCommand

This class implements the base for service commands which actually act on the service(s).

SessionStateProviderBase

This is the base class for all the providers that produce a view on session state data (Variables, Aliases, and Functions)

SessionStateProviderBaseContentReaderWriter

The content reader/writer for all providers deriving from SessionStateProviderBase.

SetAclCommand

Defines the implementation of the 'set-acl' cmdlet. This cmdlet sets the security descriptor of an item at the specified path.

SetAliasCommand

The implementation of the "set-alias" cmdlet.

SetAuthenticodeSignatureCommand

Defines the implementation of the 'set-AuthenticodeSignature' cmdlet. This cmdlet sets the digital signature on a given file.

SetClipboardCommand

Defines the implementation of the 'Set-Clipboard' cmdlet. This cmdlet gets the content from system clipboard.

SetContentCommand

A command to set the content of an item at a specified path.

SetDateCommand

Implementation for the set-date command.

SetExecutionPolicyCommand

Defines the implementation of the 'Set-ExecutionPolicy' cmdlet. This cmdlet sets the local preference for the execution policy of the shell.

The execution policy may be overridden by settings in Group Policy. If the Group Policy setting overrides the desired behaviour, the Cmdlet generates a terminating error.

SetItemCommand

Sets the specified item using the namespace providers.

SetItemPropertyCommand

A command to set the property of an item at a specified path.

SetLocationCommand

The core command for setting/changing location. This is the equivalent of cd command.

SetMarkdownOptionCommand

Class for implementing Set-MarkdownOption cmdlet.

SetPSBreakpointCommand

This class implements Set-PSBreakpoint command.

SetPSDebugCommand

Implements a cmdlet that sets the script debugging options.

SetPSSessionConfigurationCommand

Class implemeting Set-PSSessionConfiguration

SetServiceCommand

This class implements the set-service command

SetStrictModeCommand

Set-StrictMode causes the interpreter to throw an exception in the following cases:

  • Referencing an unassigned variable
  • Referencing a non-existent property of an object
  • Calling a function as a method (with parentheses and commas)
  • Using the variable expansion syntax in a string literal w/o naming a variable, i.e. "${}"

Parameters:

-Version allows the script author to specify which strict mode version to enforce. -Off turns strict mode off

Note:

Unlike Set-PSDebug -strict, Set-StrictMode is not engine-wide, and only affects the scope it was defined in.

SetTimeZoneCommand

A cmdlet to set the system's local time zone.

SetTraceSourceCommand

A cmdlet that sets the properties of the TraceSwitch instances that are instantiated in the process.

SetVariableCommand

This class implements set-variable command.

SetWmiInstance

A command to Set WMI Instance

ShowCommandCommand

Show-Command displays a GUI for a cmdlet, or for all cmdlets if no specific cmdlet is specified.

ShowControlPanelItemCommand

Show the specified control panel applet

ShowEventLogCommand

This class implements the Show-EventLog command

ShowMarkdownCommand

Show the VT100EncodedString or Html property of on console or show. VT100EncodedString will be displayed on console. Html will be displayed in default browser.

SignatureCommandsBase

Defines the base class from which all signature commands are derived.

SortObjectCommand
SplitPathCommand

A command to resolve PowerShell paths containing glob characters to PowerShell paths that match the glob strings.

StartJobCommand

This cmdlet start invocation of jobs in background.

StartProcessCommand

This class implements the Start-process command.

StartServiceCommand

This class implements the start-service command

StartSleepCommand

Suspend shell, script, or runspace activity for the specified period of time.

StartTransactionCommand

A command that begins a transaction.

StartTranscriptCommand

Implements the start-transcript cmdlet.

StopComputerCommand

Cmdlet to stop computer.

StopJobCommand

This cmdlet stops the asynchronously invoked remote operations.

StopProcessCommand

This class implements the stop-process command.

StopServiceCommand

This class implements the stop-service command

StopTranscriptCommand

Implements the stop-transcript cmdlet.

SuspendJobCommand

This cmdlet suspends the jobs that are Job2. Errors are added for each Job that is not Job2.

SuspendServiceCommand

This class implements the suspend-service command

TeeObjectCommand

Class for Tee-object implementation.

TestComputerSecureChannelCommand

This cmdlet queries the status of trust relationships and will remove and rebuild the trust if specified.

TestConnectionCommand

The implementation of the "Test-Connection" cmdlet.

TestConnectionCommand.PingMtuStatus

The class contains information about the source, the destination and ping results.

TestConnectionCommand.PingStatus

The class contains information about the source, the destination and ping results.

TestConnectionCommand.TcpPortStatus

The class contains information about the TCP connection test.

TestConnectionCommand.TraceStatus

The class contains an information about a trace route attempt.

TestFileCatalogCommand

Defines the implementation of the 'Test-FileCatalog' cmdlet. This cmdlet validaes the Intgerity of catalog

TestJsonCommand

This class implements Test-Json command.

TestModuleManifestCommand

This cmdlet takes a module manifest and validates the contents...

TestPathCommand

A command to determine if an item exists at a specified path.

TestPSSessionConfigurationFileCommand

Test-PSSessionConfigurationFile command implementation

See Declarative Initial Session Config (DISC)

TextMeasureInfo

Class output by Measure-Object.

TraceCommandBase

A base class for cmdlets that has helper methods for globbing trace source instances.

TraceCommandCommand

A cmdlet that traces the specified categories and flags for the duration of the specified expression.

TraceListenerCommandBase

A base class for the trace cmdlets that allow you to specify which trace listeners to add to a TraceSource.

UnblockFileCommand

Removes the Zone.Identifier stream from a file.

UndoTransactionCommand

A command that rolls back a transaction.

UnprotectCmsMessageCommand

Defines the implementation of the 'Unprotect-CmsMessage' cmdlet.

This cmdlet retrieves the clear text content of an encrypted CMS message.

UnregisterEventCommand

Unregisters from an event on an object.

UnregisterPSSessionConfigurationCommand

Class implemeting Unregister-PSSessionConfiguration

UpdatableHelpCommandBase

The base class of all updatable help system cmdlets (Update-Help, Save-Help)

UpdateData

This is the base class for update-typedata and update-formatdata.

UpdateFormatDataCommand

This class implements update-typeData command.

UpdateHelpCommand

This class implements the Update-Help cmdlet.

UpdateListCommand

This cmdlet updates the property of incoming objects and passes them to the pipeline. This cmdlet also returns a .NET object with properties that defines the update action on a list. This cmdlet is most helpful when the cmdlet author wants the user to do update action on object list that are not directly exposed through cmdlet parameter. One wants to update a property value which is a list (multi-valued parameter for a cmdlet), without exposing the list.

UpdateTypeDataCommand

This class implements update-typeData command.

UseTransactionCommand

A command that commits a transaction.

UtilityResources

Utility class to contain resources for the Microsoft.PowerShell.Utility module.

ValidateCultureNamesGenerator

Get list of valid culture names for ValidateSet attribute.

ValidateMatchStringCultureNamesGenerator

Get list of valid culture names for ValidateSet attribute.

VariableCommandBase

Base class for all variable commands. Because -Scope is defined in VariableCommandBase, all derived commands must implement -Scope.

VariableProvider

This provider is the data accessor for shell variables. It uses the HashtableProvider as the base class to get a hashtable as a data store.

WaitDebuggerCommand

This cmdlet causes a running script or command to stop in the debugger at the next execution point.

WaitEventCommand

Waits for a given event to arrive.

WaitJobCommand

This cmdlet waits for job to complete.

WaitProcessCommand

This class implements the Wait-process command.

WebCmdletElementCollection

WebCmdletElementCollection for elements in html web responses.

WebRequestPSCmdlet

Base class for Invoke-RestMethod and Invoke-WebRequest commands.

WebRequestSession

WebRequestSession for holding session infos.

WebResponseObject

WebResponseObject.

WhereObjectCommand

Implements a cmdlet that applys a script block to each element of the pipeline. If the result of that application is true, then the current pipeline object is passed on, otherwise it is dropped.

WmiBaseCmdlet

A class to set WMI connection options

WriteAliasCommandBase

The base class for the SetAliasCommand and NewAliasCommand.

WriteContentCommandBase

A base class for the commands that write content (set-content, add-content)

WriteDebugCommand

This class implements Write-Debug command.

WriteErrorCommand

This class implements Write-Error command.

WriteErrorException

The write-error cmdlet uses WriteErrorException when the user only specifies a string and not an Exception or ErrorRecord.

WriteEventLogCommand

This class implements the Write-EventLog command

WriteHostCommand

WriteHost cmdlet.

WriteInformationCommand

This class implements Write-Information command.

WriteOrThrowErrorCommand

This class implements the Write-Error command.

WriteOutputCommand

This class implements Write-Output command.

WriteProgressCommand

Implements the write-progress cmdlet.

WriteVerboseCommand

This class implements Write-Verbose command.

WriteWarningCommand

This class implements Write-Warning command.

WSManConfigurationOption

Implementing type for WSManConfigurationOption.

X509StoreLocation

Defines a class to represent a store location in the certificate provider. The two possible store locations are CurrentUser and LocalMachine

Structs

DnsNameRepresentation

Defines the type of DNS string The structure contains punycode name and unicode name

EnhancedKeyUsageRepresentation

Defines the type of EKU string The structure contains friendly name and EKU oid

JsonObject.ConvertToJsonContext

Context for convert-to-json operation.

ModuleCmdletBase.ImportModuleOptions

Options set during module import.

Enums

AdminPasswordStatus

System hardware security settings for administrator password status

BaseCsvWritingCommand.QuoteKind

Kind of output quoting.

BootOptionAction

Actions related to the BootOptionOn* properties of the Win32_ComputerSystem CIM class

BreakpointType

Types of breakpoints.

ClipboardFormat

Defines the different type supported by the clipboard.

ConvertFromSddlStringCommand.AccessRightTypeNames
CpuArchitecture

Specifies the processor architecture

CpuAvailability

Specifies a CPU's availability and status

CpuStatus

Specifies that current status of the processor

DataExecutionPreventionSupportPolicy

Data Execution Prevention (DEP) settings

DeviceGuardConfigCodeIntegrityStatus

Configuration status of the Device Guard Code Integrity

DeviceGuardHardwareSecure

Device Guard hardware security properties

DeviceGuardSmartStatus

Status of the Device Guard feature

DeviceGuardSoftwareSecure

Device Guard software security properties

DisplayHintType

Display Hint type.

DomainRole

Role of a computer in an assigned domain workgroup

ExportAliasFormat

The formats that export-alias supports.

FileSystemCmdletProviderEncoding

Defines the values that can be supplied as the encoding parameter in the FileSystemContentDynamicParametersBase class.

FirmwareType

Specifies a firmware type

ForegroundApplicationBoost

Increase in priority given to the foreground application

FrontPanelResetStatus

hardware security settings for the reset button on a computer

HardwareSecurity

Indicates a hardware security setting

InvokeRestMethodCommand.RestReturnType

Enum for rest return type.

JoinOptions

Options for joining a computer to a domain

Language

Languages supported for code generation.

NetConnectionStatus

State of the network adapter connection to the network

OpenMode

The enum used by commands to allow the user to specify how a file (or other item) should be opened.

OperatingSystemSKU

Indicates the operating system Stock Keeping Unit (SKU)

OSEncryptionLevel

Encryption level for secure transactions: 40-bit, 128-bit, or n-bit.

OSProductSuite

Indicates installed and licensed system product additions to the operating system

OSType

Type of operating system

OutputAssemblyType

Types supported for the OutputAssembly parameter.

OutputModeOption

Enum for SelectionMode parameter.

OutTarget

Output modes available to the Receive-PSSession cmdlet.

PCSystemType

Specifies the type of the computer in use, such as laptop, desktop, or Tablet

PCSystemTypeEx

Specifies the type of the computer in use, such as laptop, desktop, or Tablet. This is an extended verion of PCSystemType

PowerManagementCapabilities

Specifies power-related capabilities of a logical device

PowerPlatformRole

Indicates the OEM's preferred power management profile

PowerState

Specified power states

ProcessorType

Specifies the primary function of a processor

ProductType

Additional system information, from Win32_OperatingSystem

ResetCapability

Specifies a computer's reset capability

ServerLevel

Specifies the system server level

ServiceStartupType
SessionFilterState

Runspace states that can be used as filters for querying remote runspaces.

SoftwareElementState

State of a software element

SystemElementState

Indicates the state of a system element

TestPathType

The valid values for the -PathType parameter for test-path.

TextEncodingType

Don't use! The API is obsolete!.

UpdateHelpScope

Scope to which the help should be saved.

WaitForServiceTypes

Defines the services that Restart-Computer can wait on

WakeUpType

Specifies the kind of event that causes a computer to power up

WebAuthenticationType

The valid values for the -Authentication parameter for Invoke-RestMethod and Invoke-WebRequest.

WebRequestMethod

Enums for web request method.

WebSslProtocol

The valid values for the -SslProtocol parameter for Invoke-RestMethod and Invoke-WebRequest.

WmiState

Enumerated type defining the state of the WMI operation