Array.SetValue Array.SetValue Array.SetValue Array.SetValue Method

정의

현재 Array의 지정한 요소를 지정한 값으로 설정합니다.Sets the specified element in the current Array to the specified value.

오버로드

SetValue(Object, Int32) SetValue(Object, Int32) SetValue(Object, Int32) SetValue(Object, Int32)

값을 1차원 Array에 있는 지정한 위치의 요소로 설정합니다.Sets a value to the element at the specified position in the one-dimensional Array. 인덱스가 32비트 정수로 지정되어 있습니다.The index is specified as a 32-bit integer.

SetValue(Object, Int32[]) SetValue(Object, Int32[]) SetValue(Object, Int32[]) SetValue(Object, Int32[])

값을 다차원 Array에 있는 지정한 위치의 요소로 설정합니다.Sets a value to the element at the specified position in the multidimensional Array. 인덱스가 32비트 정수 배열로 지정되어 있습니다.The indexes are specified as an array of 32-bit integers.

SetValue(Object, Int64) SetValue(Object, Int64) SetValue(Object, Int64) SetValue(Object, Int64)

값을 1차원 Array에 있는 지정한 위치의 요소로 설정합니다.Sets a value to the element at the specified position in the one-dimensional Array. 인덱스가 64비트 정수로 지정되어 있습니다.The index is specified as a 64-bit integer.

SetValue(Object, Int64[]) SetValue(Object, Int64[]) SetValue(Object, Int64[]) SetValue(Object, Int64[])

값을 다차원 Array에 있는 지정한 위치의 요소로 설정합니다.Sets a value to the element at the specified position in the multidimensional Array. 인덱스가 64비트 정수 배열로 지정되어 있습니다.The indexes are specified as an array of 64-bit integers.

SetValue(Object, Int32, Int32) SetValue(Object, Int32, Int32) SetValue(Object, Int32, Int32) SetValue(Object, Int32, Int32)

값을 이차원 Array에 있는 지정한 위치의 요소로 설정합니다.Sets a value to the element at the specified position in the two-dimensional Array. 인덱스가 32비트 정수로 지정되어 있습니다.The indexes are specified as 32-bit integers.

SetValue(Object, Int64, Int64) SetValue(Object, Int64, Int64) SetValue(Object, Int64, Int64) SetValue(Object, Int64, Int64)

값을 이차원 Array에 있는 지정한 위치의 요소로 설정합니다.Sets a value to the element at the specified position in the two-dimensional Array. 인덱스가 64비트 정수로 지정되어 있습니다.The indexes are specified as 64-bit integers.

SetValue(Object, Int32, Int32, Int32) SetValue(Object, Int32, Int32, Int32) SetValue(Object, Int32, Int32, Int32) SetValue(Object, Int32, Int32, Int32)

값을 삼차원 Array에 있는 지정한 위치의 요소로 설정합니다.Sets a value to the element at the specified position in the three-dimensional Array. 인덱스가 32비트 정수로 지정되어 있습니다.The indexes are specified as 32-bit integers.

SetValue(Object, Int64, Int64, Int64) SetValue(Object, Int64, Int64, Int64) SetValue(Object, Int64, Int64, Int64) SetValue(Object, Int64, Int64, Int64)

값을 삼차원 Array에 있는 지정한 위치의 요소로 설정합니다.Sets a value to the element at the specified position in the three-dimensional Array. 인덱스가 64비트 정수로 지정되어 있습니다.The indexes are specified as 64-bit integers.

SetValue(Object, Int32) SetValue(Object, Int32) SetValue(Object, Int32) SetValue(Object, Int32)

값을 1차원 Array에 있는 지정한 위치의 요소로 설정합니다.Sets a value to the element at the specified position in the one-dimensional Array. 인덱스가 32비트 정수로 지정되어 있습니다.The index is specified as a 32-bit integer.

public:
 void SetValue(System::Object ^ value, int index);
public void SetValue (object value, int index);
member this.SetValue : obj * int -> unit
Public Sub SetValue (value As Object, index As Integer)

매개 변수

value
Object Object Object Object

지정한 요소의 새 값입니다.The new value for the specified element.

index
Int32 Int32 Int32 Int32

설정할 Array 요소의 위치를 나타내는 32비트 정수입니다.A 32-bit integer that represents the position of the Array element to set.

예외

현재 Array에 1차원이 없는 경우The current Array does not have exactly one dimension.

value 를 현재 Array의 요소 형식으로 캐스팅할 수 없습니다.value cannot be cast to the element type of the current Array.

index가 현재 Array의 올바른 인덱스 범위 밖에 있는 경우index is outside the range of valid indexes for the current Array.

예제

다음 코드 예제에는 설정 하 고 1 차원 또는 다차원 배열에서 특정 값을 가져오는 방법을 보여 줍니다.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {
 
      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );


      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );


      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );


      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );

   }
 
}


/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub

End Class


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

설명

GetLowerBoundGetUpperBound 메서드를 확인할 수 있는지 여부를 값 index 범위를 벗어났습니다.The GetLowerBound and GetUpperBound methods can determine whether the value of index is out of bounds.

변환에 대 한 자세한 내용은 참조 하세요. Convert합니다.For more information about conversions, see Convert.

이 방법은 O(1) 작업에 설명 합니다.This method is an O(1) operation.

참고

하는 경우 SetValue 할당할는 null 요소의 모든 필드의 값 형식 배열의 요소에 0으로 초기화 됩니다.If SetValue is used to assign null to an element of an array of value types, all fields of the element are initialized to zero. 요소의 값은 null 참조가 아니며 null 참조를 검색 하 여 찾을 수 없습니다.The value of the element is not a null reference, and cannot be found by searching for a null reference.

추가 정보

SetValue(Object, Int32[]) SetValue(Object, Int32[]) SetValue(Object, Int32[]) SetValue(Object, Int32[])

값을 다차원 Array에 있는 지정한 위치의 요소로 설정합니다.Sets a value to the element at the specified position in the multidimensional Array. 인덱스가 32비트 정수 배열로 지정되어 있습니다.The indexes are specified as an array of 32-bit integers.

public:
 void SetValue(System::Object ^ value, ... cli::array <int> ^ indices);
public void SetValue (object value, params int[] indices);
member this.SetValue : obj * int[] -> unit
Public Sub SetValue (value As Object, ParamArray indices As Integer())

매개 변수

value
Object Object Object Object

지정한 요소의 새 값입니다.The new value for the specified element.

indices
Int32[]

설정할 요소의 위치를 지정하는 인덱스를 나타내는 32비트 정수의 1차원 배열입니다.A one-dimensional array of 32-bit integers that represent the indexes specifying the position of the element to set.

예외

현재 Array의 차수가 indices에 있는 요소 수와 다른 경우The number of dimensions in the current Array is not equal to the number of elements in indices.

valueArray의 요소 형식으로 캐스팅할 수 없는 경우value cannot be cast to the element type of the current Array.

indices의 요소가 현재 Array의 해당 차원에 대한 올바른 인덱스 범위 밖에 있는 경우Any element in indices is outside the range of valid indexes for the corresponding dimension of the current Array.

예제

다음 코드 예제에는 설정 하 고 1 차원 또는 다차원 배열에서 특정 값을 가져오는 방법을 보여 줍니다.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {
 
      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );


      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );


      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );


      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );

   }
 
}


/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub

End Class


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

설명

요소 수가 indices 차원 수와 같아야 합니다 Array합니다.The number of elements in indices must equal the number of dimensions in the Array. 모든 요소를 indices 에서 다차원 배열 원하는 요소의 위치를 전체적으로 지정 해야 Array합니다.All elements in the indices array must collectively specify the position of the desired element in the multidimensional Array.

합니다 GetLowerBound 하 고 GetUpperBound 메서드는 값에 있는지 여부를 확인할 수 있습니다는 indices 배열 범위를 벗어났습니다.The GetLowerBound and GetUpperBound methods can determine whether any of the values in the indices array is out of bounds.

변환에 대 한 자세한 내용은 참조 하세요. Convert합니다.For more information about conversions, see Convert.

이 방법은 O(1) 작업에 설명 합니다.This method is an O(1) operation.

참고

하는 경우 SetValue 할당할는 null 요소의 모든 필드의 값 형식 배열의 요소에 0으로 초기화 됩니다.If SetValue is used to assign null to an element of an array of value types, all fields of the element are initialized to zero. 요소의 값은 null 참조가 아니며 null 참조를 검색 하 여 찾을 수 없습니다.The value of the element is not a null reference, and cannot be found by searching for a null reference.

추가 정보

SetValue(Object, Int64) SetValue(Object, Int64) SetValue(Object, Int64) SetValue(Object, Int64)

값을 1차원 Array에 있는 지정한 위치의 요소로 설정합니다.Sets a value to the element at the specified position in the one-dimensional Array. 인덱스가 64비트 정수로 지정되어 있습니다.The index is specified as a 64-bit integer.

public:
 void SetValue(System::Object ^ value, long index);
[System.Runtime.InteropServices.ComVisible(false)]
public void SetValue (object value, long index);
member this.SetValue : obj * int64 -> unit
Public Sub SetValue (value As Object, index As Long)

매개 변수

value
Object Object Object Object

지정한 요소의 새 값입니다.The new value for the specified element.

index
Int64 Int64 Int64 Int64

설정할 Array 요소의 위치를 나타내는 64비트 정수입니다.A 64-bit integer that represents the position of the Array element to set.

예외

현재 Array에 1차원이 없는 경우The current Array does not have exactly one dimension.

value 를 현재 Array의 요소 형식으로 캐스팅할 수 없습니다.value cannot be cast to the element type of the current Array.

index가 현재 Array의 올바른 인덱스 범위 밖에 있는 경우index is outside the range of valid indexes for the current Array.

예제

다음 코드 예제에는 설정 하 고 1 차원 또는 다차원 배열에서 특정 값을 가져오는 방법을 보여 줍니다.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {
 
      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );


      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );


      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );


      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );

   }
 
}


/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub

End Class


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

설명

GetLowerBoundGetUpperBound 메서드를 확인할 수 있는지 여부를 값 index 범위를 벗어났습니다.The GetLowerBound and GetUpperBound methods can determine whether the value of index is out of bounds.

변환에 대 한 자세한 내용은 참조 하세요. Convert합니다.For more information about conversions, see Convert.

이 방법은 O(1) 작업에 설명 합니다.This method is an O(1) operation.

참고

하는 경우 SetValue 할당할는 null 요소의 모든 필드의 값 형식 배열의 요소에 0으로 초기화 됩니다.If SetValue is used to assign null to an element of an array of value types, all fields of the element are initialized to zero. 요소의 값은 null 참조가 아니며 null 참조를 검색 하 여 찾을 수 없습니다.The value of the element is not a null reference, and cannot be found by searching for a null reference.

추가 정보

SetValue(Object, Int64[]) SetValue(Object, Int64[]) SetValue(Object, Int64[]) SetValue(Object, Int64[])

값을 다차원 Array에 있는 지정한 위치의 요소로 설정합니다.Sets a value to the element at the specified position in the multidimensional Array. 인덱스가 64비트 정수 배열로 지정되어 있습니다.The indexes are specified as an array of 64-bit integers.

public:
 void SetValue(System::Object ^ value, ... cli::array <long> ^ indices);
[System.Runtime.InteropServices.ComVisible(false)]
public void SetValue (object value, params long[] indices);
member this.SetValue : obj * int64[] -> unit
Public Sub SetValue (value As Object, ParamArray indices As Long())

매개 변수

value
Object Object Object Object

지정한 요소의 새 값입니다.The new value for the specified element.

indices
Int64[]

설정할 요소의 위치를 지정하는 인덱스를 나타내는 64비트 정수의 1차원 배열입니다.A one-dimensional array of 64-bit integers that represent the indexes specifying the position of the element to set.

예외

현재 Array의 차수가 indices에 있는 요소 수와 다른 경우The number of dimensions in the current Array is not equal to the number of elements in indices.

valueArray의 요소 형식으로 캐스팅할 수 없는 경우value cannot be cast to the element type of the current Array.

indices의 요소가 현재 Array의 해당 차원에 대한 올바른 인덱스 범위 밖에 있는 경우Any element in indices is outside the range of valid indexes for the corresponding dimension of the current Array.

예제

다음 코드 예제에는 설정 하 고 1 차원 또는 다차원 배열에서 특정 값을 가져오는 방법을 보여 줍니다.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {
 
      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );


      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );


      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );


      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );

   }
 
}


/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub

End Class


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

설명

요소 수가 indices 차원 수와 같아야 합니다 Array합니다.The number of elements in indices must equal the number of dimensions in the Array. 모든 요소를 indices 에서 다차원 배열 원하는 요소의 위치를 전체적으로 지정 해야 Array합니다.All elements in the indices array must collectively specify the position of the desired element in the multidimensional Array.

합니다 GetLowerBound 하 고 GetUpperBound 메서드는 값에 있는지 여부를 확인할 수 있습니다는 indices 배열 범위를 벗어났습니다.The GetLowerBound and GetUpperBound methods can determine whether any of the values in the indices array is out of bounds.

변환에 대 한 자세한 내용은 참조 하세요. Convert합니다.For more information about conversions, see Convert.

이 방법은 O(1) 작업에 설명 합니다.This method is an O(1) operation.

참고

하는 경우 SetValue 할당할는 null 요소의 모든 필드의 값 형식 배열의 요소에 0으로 초기화 됩니다.If SetValue is used to assign null to an element of an array of value types, all fields of the element are initialized to zero. 요소의 값은 null 참조가 아니며 null 참조를 검색 하 여 찾을 수 없습니다.The value of the element is not a null reference, and cannot be found by searching for a null reference.

추가 정보

SetValue(Object, Int32, Int32) SetValue(Object, Int32, Int32) SetValue(Object, Int32, Int32) SetValue(Object, Int32, Int32)

값을 이차원 Array에 있는 지정한 위치의 요소로 설정합니다.Sets a value to the element at the specified position in the two-dimensional Array. 인덱스가 32비트 정수로 지정되어 있습니다.The indexes are specified as 32-bit integers.

public:
 void SetValue(System::Object ^ value, int index1, int index2);
public void SetValue (object value, int index1, int index2);
member this.SetValue : obj * int * int -> unit
Public Sub SetValue (value As Object, index1 As Integer, index2 As Integer)

매개 변수

value
Object Object Object Object

지정한 요소의 새 값입니다.The new value for the specified element.

index1
Int32 Int32 Int32 Int32

설정할 Array 요소의 첫 번째 차원 인덱스를 나타내는 32비트 정수입니다.A 32-bit integer that represents the first-dimension index of the Array element to set.

index2
Int32 Int32 Int32 Int32

설정할 Array 요소의 두 번째 차원 인덱스를 나타내는 32비트 정수입니다.A 32-bit integer that represents the second-dimension index of the Array element to set.

예외

현재 Array에 이차원이 없는 경우The current Array does not have exactly two dimensions.

valueArray의 요소 형식으로 캐스팅할 수 없는 경우value cannot be cast to the element type of the current Array.

index1 또는 index2가 현재 Array의 해당 차원에 대한 올바른 인덱스 범위 밖에 있는 경우Either index1 or index2 is outside the range of valid indexes for the corresponding dimension of the current Array.

예제

다음 코드 예제에는 설정 하 고 1 차원 또는 다차원 배열에서 특정 값을 가져오는 방법을 보여 줍니다.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {
 
      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );


      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );


      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );


      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );

   }
 
}


/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub

End Class


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

설명

합니다 GetLowerBoundGetUpperBound 메서드 범위를 벗어난 인덱스 중 하나 인지 여부를 확인할 수 있습니다.The GetLowerBound and GetUpperBound methods can determine whether any of the indexes is out of bounds.

변환에 대 한 자세한 내용은 참조 하세요. Convert합니다.For more information about conversions, see Convert.

이 방법은 O(1) 작업에 설명 합니다.This method is an O(1) operation.

참고

하는 경우 SetValue 할당할는 null 요소의 모든 필드의 값 형식 배열의 요소에 0으로 초기화 됩니다.If SetValue is used to assign null to an element of an array of value types, all fields of the element are initialized to zero. 요소의 값은 null 참조가 아니며 null 참조를 검색 하 여 찾을 수 없습니다.The value of the element is not a null reference, and cannot be found by searching for a null reference.

추가 정보

SetValue(Object, Int64, Int64) SetValue(Object, Int64, Int64) SetValue(Object, Int64, Int64) SetValue(Object, Int64, Int64)

값을 이차원 Array에 있는 지정한 위치의 요소로 설정합니다.Sets a value to the element at the specified position in the two-dimensional Array. 인덱스가 64비트 정수로 지정되어 있습니다.The indexes are specified as 64-bit integers.

public:
 void SetValue(System::Object ^ value, long index1, long index2);
[System.Runtime.InteropServices.ComVisible(false)]
public void SetValue (object value, long index1, long index2);
member this.SetValue : obj * int64 * int64 -> unit
Public Sub SetValue (value As Object, index1 As Long, index2 As Long)

매개 변수

value
Object Object Object Object

지정한 요소의 새 값입니다.The new value for the specified element.

index1
Int64 Int64 Int64 Int64

설정할 Array 요소의 첫 번째 차원 인덱스를 나타내는 64비트 정수입니다.A 64-bit integer that represents the first-dimension index of the Array element to set.

index2
Int64 Int64 Int64 Int64

설정할 Array 요소의 두 번째 차원 인덱스를 나타내는 64비트 정수입니다.A 64-bit integer that represents the second-dimension index of the Array element to set.

예외

현재 Array에 이차원이 없는 경우The current Array does not have exactly two dimensions.

valueArray의 요소 형식으로 캐스팅할 수 없는 경우value cannot be cast to the element type of the current Array.

index1 또는 index2가 현재 Array의 해당 차원에 대한 올바른 인덱스 범위 밖에 있는 경우Either index1 or index2 is outside the range of valid indexes for the corresponding dimension of the current Array.

예제

다음 코드 예제에는 설정 하 고 1 차원 또는 다차원 배열에서 특정 값을 가져오는 방법을 보여 줍니다.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {
 
      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );


      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );


      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );


      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );

   }
 
}


/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub

End Class


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

설명

합니다 GetLowerBoundGetUpperBound 메서드 범위를 벗어난 인덱스 중 하나 인지 여부를 확인할 수 있습니다.The GetLowerBound and GetUpperBound methods can determine whether any of the indexes is out of bounds.

변환에 대 한 자세한 내용은 참조 하세요. Convert합니다.For more information about conversions, see Convert.

이 방법은 O(1) 작업에 설명 합니다.This method is an O(1) operation.

참고

하는 경우 SetValue 할당할는 null 요소의 모든 필드의 값 형식 배열의 요소에 0으로 초기화 됩니다.If SetValue is used to assign null to an element of an array of value types, all fields of the element are initialized to zero. 요소의 값은 null 참조가 아니며 null 참조를 검색 하 여 찾을 수 없습니다.The value of the element is not a null reference, and cannot be found by searching for a null reference.

추가 정보

SetValue(Object, Int32, Int32, Int32) SetValue(Object, Int32, Int32, Int32) SetValue(Object, Int32, Int32, Int32) SetValue(Object, Int32, Int32, Int32)

값을 삼차원 Array에 있는 지정한 위치의 요소로 설정합니다.Sets a value to the element at the specified position in the three-dimensional Array. 인덱스가 32비트 정수로 지정되어 있습니다.The indexes are specified as 32-bit integers.

public:
 void SetValue(System::Object ^ value, int index1, int index2, int index3);
public void SetValue (object value, int index1, int index2, int index3);
member this.SetValue : obj * int * int * int -> unit
Public Sub SetValue (value As Object, index1 As Integer, index2 As Integer, index3 As Integer)

매개 변수

value
Object Object Object Object

지정한 요소의 새 값입니다.The new value for the specified element.

index1
Int32 Int32 Int32 Int32

설정할 Array 요소의 첫 번째 차원 인덱스를 나타내는 32비트 정수입니다.A 32-bit integer that represents the first-dimension index of the Array element to set.

index2
Int32 Int32 Int32 Int32

설정할 Array 요소의 두 번째 차원 인덱스를 나타내는 32비트 정수입니다.A 32-bit integer that represents the second-dimension index of the Array element to set.

index3
Int32 Int32 Int32 Int32

설정할 Array 요소의 세 번째 차원 인덱스를 나타내는 32비트 정수입니다.A 32-bit integer that represents the third-dimension index of the Array element to set.

예외

현재 Array에 삼차원이 없는 경우The current Array does not have exactly three dimensions.

valueArray의 요소 형식으로 캐스팅할 수 없는 경우value cannot be cast to the element type of the current Array.

index1, index2 또는 index3이 현재 Array의 해당 차원에 대한 올바른 인덱스 범위 밖에 있는 경우index1 or index2 or index3 is outside the range of valid indexes for the corresponding dimension of the current Array.

예제

다음 코드 예제에는 설정 하 고 1 차원 또는 다차원 배열에서 특정 값을 가져오는 방법을 보여 줍니다.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {
 
      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );


      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );


      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );


      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );

   }
 
}


/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub

End Class


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

설명

합니다 GetLowerBoundGetUpperBound 메서드 범위를 벗어난 인덱스 중 하나 인지 여부를 확인할 수 있습니다.The GetLowerBound and GetUpperBound methods can determine whether any of the indexes is out of bounds.

변환에 대 한 자세한 내용은 참조 하세요. Convert합니다.For more information about conversions, see Convert.

이 방법은 O(1) 작업에 설명 합니다.This method is an O(1) operation.

참고

하는 경우 SetValue 할당할는 null 요소의 모든 필드의 값 형식 배열의 요소에 0으로 초기화 됩니다.If SetValue is used to assign null to an element of an array of value types, all fields of the element are initialized to zero. 요소의 값은 null 참조가 아니며 null 참조를 검색 하 여 찾을 수 없습니다.The value of the element is not a null reference, and cannot be found by searching for a null reference.

추가 정보

SetValue(Object, Int64, Int64, Int64) SetValue(Object, Int64, Int64, Int64) SetValue(Object, Int64, Int64, Int64) SetValue(Object, Int64, Int64, Int64)

값을 삼차원 Array에 있는 지정한 위치의 요소로 설정합니다.Sets a value to the element at the specified position in the three-dimensional Array. 인덱스가 64비트 정수로 지정되어 있습니다.The indexes are specified as 64-bit integers.

public:
 void SetValue(System::Object ^ value, long index1, long index2, long index3);
[System.Runtime.InteropServices.ComVisible(false)]
public void SetValue (object value, long index1, long index2, long index3);
member this.SetValue : obj * int64 * int64 * int64 -> unit
Public Sub SetValue (value As Object, index1 As Long, index2 As Long, index3 As Long)

매개 변수

value
Object Object Object Object

지정한 요소의 새 값입니다.The new value for the specified element.

index1
Int64 Int64 Int64 Int64

설정할 Array 요소의 첫 번째 차원 인덱스를 나타내는 64비트 정수입니다.A 64-bit integer that represents the first-dimension index of the Array element to set.

index2
Int64 Int64 Int64 Int64

설정할 Array 요소의 두 번째 차원 인덱스를 나타내는 64비트 정수입니다.A 64-bit integer that represents the second-dimension index of the Array element to set.

index3
Int64 Int64 Int64 Int64

설정할 Array 요소의 세 번째 차원 인덱스를 나타내는 64비트 정수입니다.A 64-bit integer that represents the third-dimension index of the Array element to set.

예외

현재 Array에 삼차원이 없는 경우The current Array does not have exactly three dimensions.

valueArray의 요소 형식으로 캐스팅할 수 없는 경우value cannot be cast to the element type of the current Array.

index1, index2 또는 index3이 현재 Array의 해당 차원에 대한 올바른 인덱스 범위 밖에 있는 경우index1 or index2 or index3 is outside the range of valid indexes for the corresponding dimension of the current Array.

예제

다음 코드 예제에는 설정 하 고 1 차원 또는 다차원 배열에서 특정 값을 가져오는 방법을 보여 줍니다.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {
 
      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );


      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );


      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );


      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );

   }
 
}


/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub

End Class


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

설명

합니다 GetLowerBoundGetUpperBound 메서드 범위를 벗어난 인덱스 중 하나 인지 여부를 확인할 수 있습니다.The GetLowerBound and GetUpperBound methods can determine whether any of the indexes is out of bounds.

변환에 대 한 자세한 내용은 참조 하세요. Convert합니다.For more information about conversions, see Convert.

이 방법은 O(1) 작업에 설명 합니다.This method is an O(1) operation.

참고

하는 경우 SetValue 할당할는 null 요소의 모든 필드의 값 형식 배열의 요소에 0으로 초기화 됩니다.If SetValue is used to assign null to an element of an array of value types, all fields of the element are initialized to zero. 요소의 값은 null 참조가 아니며 null 참조를 검색 하 여 찾을 수 없습니다.The value of the element is not a null reference, and cannot be found by searching for a null reference.

추가 정보

적용 대상