List<T>.RemoveRange(Int32, Int32) 메서드

정의

네임스페이스:
System.Collections.Generic
어셈블리:
System.Collections.dll
어셈블리:
mscorlib.dll, System.Collections.dll
어셈블리:
mscorlib.dll
어셈블리:
netstandard.dll

List<T>에서 요소의 범위를 제거합니다.Removes a range of elements from the List<T>.

public:
 void RemoveRange(int index, int count);
public void RemoveRange (int index, int count);
member this.RemoveRange : int * int -> unit
Public Sub RemoveRange (index As Integer, count As Integer)

매개 변수

index
Int32

제거할 요소의 범위에 대한 0부터 시작하는 인덱스입니다.The zero-based starting index of the range of elements to remove.

count
Int32

제거할 요소의 수입니다.The number of elements to remove.

예외

ArgumentOutOfRangeException

index 가 0보다 작습니다.index is less than 0.

또는-or- count 가 0보다 작습니다.count is less than 0.

ArgumentException

index 및 count가 List<T>에서 올바른 요소 범위를 나타내지 않습니다.index and count do not denote a valid range of elements in the List<T>.

예제

다음 예제에서는 RemoveRange List<T> 범위에 대해 작동 하는 클래스의 메서드 및 다른 여러 메서드를 보여 줍니다.The following example demonstrates the RemoveRange method and various other methods of the List<T> class that act on ranges. 목록이 생성 되 고 수정 된 후 RemoveRange 메서드는 인덱스 위치 2부터 시작 하 여 목록에서 두 개의 요소를 제거 하는 데 사용 됩니다.After the list has been created and modified, the RemoveRange method is used to remove two elements from the list, beginning at index location 2.

using namespace System;
using namespace System::Collections::Generic;

void main()
{
    array<String^>^ input = { "Brachiosaurus", 
                              "Amargasaurus", 
                              "Mamenchisaurus" };

    List<String^>^ dinosaurs = 
        gcnew List<String^>((IEnumerable<String^>^) input);

    Console::WriteLine("\nCapacity: {0}", dinosaurs->Capacity);

    Console::WriteLine();
    for each(String^ dinosaur in dinosaurs )
    {
        Console::WriteLine(dinosaur);
    }

    Console::WriteLine("\nAddRange(dinosaurs)");
    dinosaurs->AddRange(dinosaurs);

    Console::WriteLine();
    for each(String^ dinosaur in dinosaurs )
    {
        Console::WriteLine(dinosaur);
    }

    Console::WriteLine("\nRemoveRange(2, 2)");
    dinosaurs->RemoveRange(2, 2);

    Console::WriteLine();
    for each(String^ dinosaur in dinosaurs )
    {
        Console::WriteLine(dinosaur);
    }

    input = gcnew array<String^> { "Tyrannosaurus", 
                                   "Deinonychus", 
                                   "Velociraptor"};

    Console::WriteLine("\nInsertRange(3, (IEnumerable<String^>^) input)");
    dinosaurs->InsertRange(3, (IEnumerable<String^>^) input);

    Console::WriteLine();
    for each(String^ dinosaur in dinosaurs )
    {
        Console::WriteLine(dinosaur);
    }

    Console::WriteLine("\noutput = dinosaurs->GetRange(2, 3)->ToArray()");
    array<String^>^ output = dinosaurs->GetRange(2, 3)->ToArray();
        
    Console::WriteLine();
    for each(String^ dinosaur in output )
    {
        Console::WriteLine(dinosaur);
    }
}

/* This code example produces the following output:

Capacity: 3

Brachiosaurus
Amargasaurus
Mamenchisaurus

AddRange(dinosaurs)

Brachiosaurus
Amargasaurus
Mamenchisaurus
Brachiosaurus
Amargasaurus
Mamenchisaurus

RemoveRange(2, 2)

Brachiosaurus
Amargasaurus
Amargasaurus
Mamenchisaurus

InsertRange(3, (IEnumerable<String^>^) input)

Brachiosaurus
Amargasaurus
Amargasaurus
Tyrannosaurus
Deinonychus
Velociraptor
Mamenchisaurus

output = dinosaurs->GetRange(2, 3)->ToArray()

Amargasaurus
Tyrannosaurus
Deinonychus
 */

using System;
using System.Collections.Generic;

public class Example
{
    public static void Main()
    {
        string[] input = { "Brachiosaurus",
                           "Amargasaurus",
                           "Mamenchisaurus" };

        List<string> dinosaurs = new List<string>(input);

        Console.WriteLine("\nCapacity: {0}", dinosaurs.Capacity);

        Console.WriteLine();
        foreach( string dinosaur in dinosaurs )
        {
            Console.WriteLine(dinosaur);
        }

        Console.WriteLine("\nAddRange(dinosaurs)");
        dinosaurs.AddRange(dinosaurs);

        Console.WriteLine();
        foreach( string dinosaur in dinosaurs )
        {
            Console.WriteLine(dinosaur);
        }

        Console.WriteLine("\nRemoveRange(2, 2)");
        dinosaurs.RemoveRange(2, 2);

        Console.WriteLine();
        foreach( string dinosaur in dinosaurs )
        {
            Console.WriteLine(dinosaur);
        }

        input = new string[] { "Tyrannosaurus",
                               "Deinonychus",
                               "Velociraptor"};

        Console.WriteLine("\nInsertRange(3, input)");
        dinosaurs.InsertRange(3, input);

        Console.WriteLine();
        foreach( string dinosaur in dinosaurs )
        {
            Console.WriteLine(dinosaur);
        }

        Console.WriteLine("\noutput = dinosaurs.GetRange(2, 3).ToArray()");
        string[] output = dinosaurs.GetRange(2, 3).ToArray();

        Console.WriteLine();
        foreach( string dinosaur in output )
        {
            Console.WriteLine(dinosaur);
        }
    }
}

/* This code example produces the following output:

Capacity: 3

Brachiosaurus
Amargasaurus
Mamenchisaurus

AddRange(dinosaurs)

Brachiosaurus
Amargasaurus
Mamenchisaurus
Brachiosaurus
Amargasaurus
Mamenchisaurus

RemoveRange(2, 2)

Brachiosaurus
Amargasaurus
Amargasaurus
Mamenchisaurus

InsertRange(3, input)

Brachiosaurus
Amargasaurus
Amargasaurus
Tyrannosaurus
Deinonychus
Velociraptor
Mamenchisaurus

output = dinosaurs.GetRange(2, 3).ToArray()

Amargasaurus
Tyrannosaurus
Deinonychus
 */

Imports System.Collections.Generic

Public Class Example

    Public Shared Sub Main()

        Dim input() As String = { "Brachiosaurus", _
                                  "Amargasaurus", _
                                  "Mamenchisaurus" }

        Dim dinosaurs As New List(Of String)(input)

        Console.WriteLine(vbLf & "Capacity: {0}", dinosaurs.Capacity)

        Console.WriteLine()
        For Each dinosaur As String In dinosaurs
            Console.WriteLine(dinosaur)
        Next

        Console.WriteLine(vbLf & "AddRange(dinosaurs)")
        dinosaurs.AddRange(dinosaurs)

        Console.WriteLine()
        For Each dinosaur As String In dinosaurs
            Console.WriteLine(dinosaur)
        Next

        Console.WriteLine(vbLf & "RemoveRange(2, 2)")
        dinosaurs.RemoveRange(2, 2)

        Console.WriteLine()
        For Each dinosaur As String In dinosaurs
            Console.WriteLine(dinosaur)
        Next

        input = New String() { "Tyrannosaurus", _
                               "Deinonychus", _
                               "Velociraptor" }

        Console.WriteLine(vbLf & "InsertRange(3, input)")
        dinosaurs.InsertRange(3, input)

        Console.WriteLine()
        For Each dinosaur As String In dinosaurs
            Console.WriteLine(dinosaur)
        Next

        Console.WriteLine(vbLf & "output = dinosaurs.GetRange(2, 3).ToArray")
        Dim output() As String = dinosaurs.GetRange(2, 3).ToArray()
        
        Console.WriteLine()
        For Each dinosaur As String In output
            Console.WriteLine(dinosaur)
        Next

    End Sub
End Class

' This code example produces the following output:
'
'Capacity: 3
'
'Brachiosaurus
'Amargasaurus
'Mamenchisaurus
'
'AddRange(dinosaurs)
'
'Brachiosaurus
'Amargasaurus
'Mamenchisaurus
'Brachiosaurus
'Amargasaurus
'Mamenchisaurus
'
'RemoveRange(2, 2)
'
'Brachiosaurus
'Amargasaurus
'Amargasaurus
'Mamenchisaurus
'
'InsertRange(3, input)
'
'Brachiosaurus
'Amargasaurus
'Amargasaurus
'Tyrannosaurus
'Deinonychus
'Velociraptor
'Mamenchisaurus
'
'output = dinosaurs.GetRange(2, 3).ToArray
'
'Amargasaurus
'Tyrannosaurus
'Deinonychus

설명

항목은 제거 되며에서 해당 항목 뒤에 나오는 모든 요소의 List<T> 인덱스는로 줄어듭니다 count .The items are removed and all the elements following them in the List<T> have their indexes reduced by count.

이 메서드는 O (n) 작업입니다. 여기서 n 은 Count 입니다.This method is an O(n) operation, where n is Count.

적용 대상

추가 정보