BitVector32.CreateSection 메서드

정의

small 정수가 포함되어 있는 일련의 섹션을 만듭니다.Creates a series of sections that contain small integers.

오버로드

CreateSection(Int16)

small 정수가 들어 있는 일련의 섹션에 첫 번째 BitVector32.Section을 만듭니다.Creates the first BitVector32.Section in a series of sections that contain small integers.

CreateSection(Int16, BitVector32+Section)

small 정수가 들어 있는 일련의 섹션에서 지정된 BitVector32.Section 다음에 새 BitVector32.Section을 만듭니다.Creates a new BitVector32.Section following the specified BitVector32.Section in a series of sections that contain small integers.

CreateSection(Int16)

small 정수가 들어 있는 일련의 섹션에 첫 번째 BitVector32.Section을 만듭니다.Creates the first BitVector32.Section in a series of sections that contain small integers.

public:
 static System::Collections::Specialized::BitVector32::Section CreateSection(short maxValue);
public static System.Collections.Specialized.BitVector32.Section CreateSection (short maxValue);
static member CreateSection : int16 -> System.Collections.Specialized.BitVector32.Section
Public Shared Function CreateSection (maxValue As Short) As BitVector32.Section

매개 변수

maxValue
Int16

BitVector32.Section의 최대값을 지정하는 16비트의 부호 있는 정수입니다.A 16-bit signed integer that specifies the maximum value for the new BitVector32.Section.

반환

0부터 BitVector32.Section 범위의 숫자를 보유할 수 있는 maxValue입니다.A BitVector32.Section that can hold a number from zero to maxValue.

예외

maxValue가 1보다 작습니다.maxValue is less than 1.

예제

다음 코드 예제에서는 BitVector32 섹션의 컬렉션으로 사용 합니다.The following code example uses a BitVector32 as a collection of sections.

#using <system.dll>

using namespace System;
using namespace System::Collections::Specialized;

int main()
{
   // Creates and initializes a BitVector32.
   BitVector32 myBV(0);

   // Creates four sections in the BitVector32 with maximum values 6, 3, 1, and 15.
   // mySect3, which uses exactly one bit, can also be used as a bit flag.
   BitVector32::Section mySect1 = BitVector32::CreateSection( 6 );
   BitVector32::Section mySect2 = BitVector32::CreateSection( 3, mySect1 );
   BitVector32::Section mySect3 = BitVector32::CreateSection( 1, mySect2 );
   BitVector32::Section mySect4 = BitVector32::CreateSection( 15, mySect3 );

   // Displays the values of the sections.
   Console::WriteLine( "Initial values:" );
   Console::WriteLine( "\tmySect1: {0}", myBV[ mySect1 ] );
   Console::WriteLine( "\tmySect2: {0}", myBV[ mySect2 ] );
   Console::WriteLine( "\tmySect3: {0}", myBV[ mySect3 ] );
   Console::WriteLine( "\tmySect4: {0}", myBV[ mySect4 ] );

   // Sets each section to a new value and displays the value of the BitVector32 at each step.
   Console::WriteLine( "Changing the values of each section:" );
   Console::WriteLine( "\tInitial:    \t {0}", myBV );
   myBV[ mySect1 ] = 5;
   Console::WriteLine( "\tmySect1 = 5:\t {0}", myBV );
   myBV[ mySect2 ] = 3;
   Console::WriteLine( "\tmySect2 = 3:\t {0}", myBV );
   myBV[ mySect3 ] = 1;
   Console::WriteLine( "\tmySect3 = 1:\t {0}", myBV );
   myBV[ mySect4 ] = 9;
   Console::WriteLine( "\tmySect4 = 9:\t {0}", myBV );

   // Displays the values of the sections.
   Console::WriteLine( "New values:" );
   Console::WriteLine( "\tmySect1: {0}", myBV[ mySect1 ] );
   Console::WriteLine( "\tmySect2: {0}", myBV[ mySect2 ] );
   Console::WriteLine( "\tmySect3: {0}", myBV[ mySect3 ] );
   Console::WriteLine( "\tmySect4: {0}", myBV[ mySect4 ] );
}

/*
This code produces the following output.

Initial values:
        mySect1: 0
        mySect2: 0
        mySect3: 0
        mySect4: 0
Changing the values of each section:
        Initial:        BitVector32 {00000000000000000000000000000000}
        mySect1 = 5:    BitVector32 {00000000000000000000000000000101}
        mySect2 = 3:    BitVector32 {00000000000000000000000000011101}
        mySect3 = 1:    BitVector32 {00000000000000000000000000111101}
        mySect4 = 9:    BitVector32 {00000000000000000000001001111101}
New values:
        mySect1: 5
        mySect2: 3
        mySect3: 1
        mySect4: 9

*/
using System;
using System.Collections.Specialized;

public class SamplesBitVector32  {

   public static void Main()  {

      // Creates and initializes a BitVector32.
      BitVector32 myBV = new BitVector32( 0 );

      // Creates four sections in the BitVector32 with maximum values 6, 3, 1, and 15.
      // mySect3, which uses exactly one bit, can also be used as a bit flag.
      BitVector32.Section mySect1 = BitVector32.CreateSection( 6 );
      BitVector32.Section mySect2 = BitVector32.CreateSection( 3, mySect1 );
      BitVector32.Section mySect3 = BitVector32.CreateSection( 1, mySect2 );
      BitVector32.Section mySect4 = BitVector32.CreateSection( 15, mySect3 );

      // Displays the values of the sections.
      Console.WriteLine( "Initial values:" );
      Console.WriteLine( "\tmySect1: {0}", myBV[mySect1] );
      Console.WriteLine( "\tmySect2: {0}", myBV[mySect2] );
      Console.WriteLine( "\tmySect3: {0}", myBV[mySect3] );
      Console.WriteLine( "\tmySect4: {0}", myBV[mySect4] );

      // Sets each section to a new value and displays the value of the BitVector32 at each step.
      Console.WriteLine( "Changing the values of each section:" );
      Console.WriteLine( "\tInitial:    \t{0}", myBV.ToString() );
      myBV[mySect1] = 5;
      Console.WriteLine( "\tmySect1 = 5:\t{0}", myBV.ToString() );
      myBV[mySect2] = 3;
      Console.WriteLine( "\tmySect2 = 3:\t{0}", myBV.ToString() );
      myBV[mySect3] = 1;
      Console.WriteLine( "\tmySect3 = 1:\t{0}", myBV.ToString() );
      myBV[mySect4] = 9;
      Console.WriteLine( "\tmySect4 = 9:\t{0}", myBV.ToString() );

      // Displays the values of the sections.
      Console.WriteLine( "New values:" );
      Console.WriteLine( "\tmySect1: {0}", myBV[mySect1] );
      Console.WriteLine( "\tmySect2: {0}", myBV[mySect2] );
      Console.WriteLine( "\tmySect3: {0}", myBV[mySect3] );
      Console.WriteLine( "\tmySect4: {0}", myBV[mySect4] );

   }

}

/*
This code produces the following output.

Initial values:
        mySect1: 0
        mySect2: 0
        mySect3: 0
        mySect4: 0
Changing the values of each section:
        Initial:        BitVector32{00000000000000000000000000000000}
        mySect1 = 5:    BitVector32{00000000000000000000000000000101}
        mySect2 = 3:    BitVector32{00000000000000000000000000011101}
        mySect3 = 1:    BitVector32{00000000000000000000000000111101}
        mySect4 = 9:    BitVector32{00000000000000000000001001111101}
New values:
        mySect1: 5
        mySect2: 3
        mySect3: 1
        mySect4: 9

*/
Imports System.Collections.Specialized

Public Class SamplesBitVector32
   
   Public Shared Sub Main()
      
      ' Creates and initializes a BitVector32.
      Dim myBV As New BitVector32(0)
      
      ' Creates four sections in the BitVector32 with maximum values 6, 3, 1, and 15.
      ' mySect3, which uses exactly one bit, can also be used as a bit flag.
      Dim mySect1 As BitVector32.Section = BitVector32.CreateSection(6)
      Dim mySect2 As BitVector32.Section = BitVector32.CreateSection(3, mySect1)
      Dim mySect3 As BitVector32.Section = BitVector32.CreateSection(1, mySect2)
      Dim mySect4 As BitVector32.Section = BitVector32.CreateSection(15, mySect3)
      
      ' Displays the values of the sections.
      Console.WriteLine("Initial values:")
      Console.WriteLine(ControlChars.Tab + "mySect1: {0}", myBV(mySect1))
      Console.WriteLine(ControlChars.Tab + "mySect2: {0}", myBV(mySect2))
      Console.WriteLine(ControlChars.Tab + "mySect3: {0}", myBV(mySect3))
      Console.WriteLine(ControlChars.Tab + "mySect4: {0}", myBV(mySect4))
      
      ' Sets each section to a new value and displays the value of the BitVector32 at each step.
      Console.WriteLine("Changing the values of each section:")
      Console.WriteLine(ControlChars.Tab + "Initial:    " + ControlChars.Tab + "{0}", myBV.ToString())
      myBV(mySect1) = 5
      Console.WriteLine(ControlChars.Tab + "mySect1 = 5:" + ControlChars.Tab + "{0}", myBV.ToString())
      myBV(mySect2) = 3
      Console.WriteLine(ControlChars.Tab + "mySect2 = 3:" + ControlChars.Tab + "{0}", myBV.ToString())
      myBV(mySect3) = 1
      Console.WriteLine(ControlChars.Tab + "mySect3 = 1:" + ControlChars.Tab + "{0}", myBV.ToString())
      myBV(mySect4) = 9
      Console.WriteLine(ControlChars.Tab + "mySect4 = 9:" + ControlChars.Tab + "{0}", myBV.ToString())
      
      ' Displays the values of the sections.
      Console.WriteLine("New values:")
      Console.WriteLine(ControlChars.Tab + "mySect1: {0}", myBV(mySect1))
      Console.WriteLine(ControlChars.Tab + "mySect2: {0}", myBV(mySect2))
      Console.WriteLine(ControlChars.Tab + "mySect3: {0}", myBV(mySect3))
      Console.WriteLine(ControlChars.Tab + "mySect4: {0}", myBV(mySect4))

   End Sub

End Class


' This code produces the following output.
'
' Initial values:
'        mySect1: 0
'        mySect2: 0
'        mySect3: 0
'        mySect4: 0
' Changing the values of each section:
'        Initial:        BitVector32{00000000000000000000000000000000}
'        mySect1 = 5:    BitVector32{00000000000000000000000000000101}
'        mySect2 = 3:    BitVector32{00000000000000000000000000011101}
'        mySect3 = 1:    BitVector32{00000000000000000000000000111101}
'        mySect4 = 9:    BitVector32{00000000000000000000001001111101}
' New values:
'        mySect1: 5
'        mySect2: 3
'        mySect3: 1
'        mySect4: 9

설명

BitVector32.SectionBitVector32 창으로, CreateSection에 지정 된 최대값을 포함할 수 있는 가장 작은 연속 비트 수로 구성 됩니다.A BitVector32.Section is a window into the BitVector32 and is composed of the smallest number of consecutive bits that can contain the maximum value specified in CreateSection. 예를 들어, 1의 최대값을 사용 하 여 섹션 5의 최대값을 사용 하 여 섹션 3 비트 이루어집니다 반면 1 비트만 구성 됩니다.For example, a section with a maximum value of 1 is composed of only one bit, whereas a section with a maximum value of 5 is composed of three bits. 최대 값이 1 인 BitVector32.Section를 만들어 부울로 사용 하 여 동일한 BitVector32에 정수와 부울을 저장할 수 있습니다.You can create a BitVector32.Section with a maximum value of 1 to serve as a Boolean, thereby allowing you to store integers and Booleans in the same BitVector32.

섹션이 BitVector32에 이미 있는 경우에도 해당 섹션에 액세스할 수 있습니다. 그러나 중복 되는 섹션으로 인해 예기치 않은 결과가 발생할 수 있습니다.If sections already exist in the BitVector32, those sections are still accessible; however, overlapping sections might cause unexpected results.

이 방법은 O(1) 작업에 설명 합니다.This method is an O(1) operation.

CreateSection(Int16, BitVector32+Section)

small 정수가 들어 있는 일련의 섹션에서 지정된 BitVector32.Section 다음에 새 BitVector32.Section을 만듭니다.Creates a new BitVector32.Section following the specified BitVector32.Section in a series of sections that contain small integers.

public:
 static System::Collections::Specialized::BitVector32::Section CreateSection(short maxValue, System::Collections::Specialized::BitVector32::Section previous);
public static System.Collections.Specialized.BitVector32.Section CreateSection (short maxValue, System.Collections.Specialized.BitVector32.Section previous);
static member CreateSection : int16 * System.Collections.Specialized.BitVector32.Section -> System.Collections.Specialized.BitVector32.Section
Public Shared Function CreateSection (maxValue As Short, previous As BitVector32.Section) As BitVector32.Section

매개 변수

maxValue
Int16

BitVector32.Section의 최대값을 지정하는 16비트의 부호 있는 정수입니다.A 16-bit signed integer that specifies the maximum value for the new BitVector32.Section.

previous
BitVector32.Section

BitVector32.Section에서 이전의 BitVector32입니다.The previous BitVector32.Section in the BitVector32.

반환

0부터 BitVector32.Section 범위의 숫자를 보유할 수 있는 maxValue입니다.A BitVector32.Section that can hold a number from zero to maxValue.

예외

maxValue가 1보다 작습니다.maxValue is less than 1.

previousBitVector32의 마지막 비트가 포함되는 경우previous includes the final bit in the BitVector32.

-또는--or- maxValueprevious 다음에 나오는 비트 수가 나타낼 수 있는 최대값보다 큰 경우maxValue is greater than the highest value that can be represented by the number of bits after previous.

예제

다음 코드 예제에서는 BitVector32 섹션의 컬렉션으로 사용 합니다.The following code example uses a BitVector32 as a collection of sections.

#using <system.dll>

using namespace System;
using namespace System::Collections::Specialized;

int main()
{
   // Creates and initializes a BitVector32.
   BitVector32 myBV(0);

   // Creates four sections in the BitVector32 with maximum values 6, 3, 1, and 15.
   // mySect3, which uses exactly one bit, can also be used as a bit flag.
   BitVector32::Section mySect1 = BitVector32::CreateSection( 6 );
   BitVector32::Section mySect2 = BitVector32::CreateSection( 3, mySect1 );
   BitVector32::Section mySect3 = BitVector32::CreateSection( 1, mySect2 );
   BitVector32::Section mySect4 = BitVector32::CreateSection( 15, mySect3 );

   // Displays the values of the sections.
   Console::WriteLine( "Initial values:" );
   Console::WriteLine( "\tmySect1: {0}", myBV[ mySect1 ] );
   Console::WriteLine( "\tmySect2: {0}", myBV[ mySect2 ] );
   Console::WriteLine( "\tmySect3: {0}", myBV[ mySect3 ] );
   Console::WriteLine( "\tmySect4: {0}", myBV[ mySect4 ] );

   // Sets each section to a new value and displays the value of the BitVector32 at each step.
   Console::WriteLine( "Changing the values of each section:" );
   Console::WriteLine( "\tInitial:    \t {0}", myBV );
   myBV[ mySect1 ] = 5;
   Console::WriteLine( "\tmySect1 = 5:\t {0}", myBV );
   myBV[ mySect2 ] = 3;
   Console::WriteLine( "\tmySect2 = 3:\t {0}", myBV );
   myBV[ mySect3 ] = 1;
   Console::WriteLine( "\tmySect3 = 1:\t {0}", myBV );
   myBV[ mySect4 ] = 9;
   Console::WriteLine( "\tmySect4 = 9:\t {0}", myBV );

   // Displays the values of the sections.
   Console::WriteLine( "New values:" );
   Console::WriteLine( "\tmySect1: {0}", myBV[ mySect1 ] );
   Console::WriteLine( "\tmySect2: {0}", myBV[ mySect2 ] );
   Console::WriteLine( "\tmySect3: {0}", myBV[ mySect3 ] );
   Console::WriteLine( "\tmySect4: {0}", myBV[ mySect4 ] );
}

/*
This code produces the following output.

Initial values:
        mySect1: 0
        mySect2: 0
        mySect3: 0
        mySect4: 0
Changing the values of each section:
        Initial:        BitVector32 {00000000000000000000000000000000}
        mySect1 = 5:    BitVector32 {00000000000000000000000000000101}
        mySect2 = 3:    BitVector32 {00000000000000000000000000011101}
        mySect3 = 1:    BitVector32 {00000000000000000000000000111101}
        mySect4 = 9:    BitVector32 {00000000000000000000001001111101}
New values:
        mySect1: 5
        mySect2: 3
        mySect3: 1
        mySect4: 9

*/
using System;
using System.Collections.Specialized;

public class SamplesBitVector32  {

   public static void Main()  {

      // Creates and initializes a BitVector32.
      BitVector32 myBV = new BitVector32( 0 );

      // Creates four sections in the BitVector32 with maximum values 6, 3, 1, and 15.
      // mySect3, which uses exactly one bit, can also be used as a bit flag.
      BitVector32.Section mySect1 = BitVector32.CreateSection( 6 );
      BitVector32.Section mySect2 = BitVector32.CreateSection( 3, mySect1 );
      BitVector32.Section mySect3 = BitVector32.CreateSection( 1, mySect2 );
      BitVector32.Section mySect4 = BitVector32.CreateSection( 15, mySect3 );

      // Displays the values of the sections.
      Console.WriteLine( "Initial values:" );
      Console.WriteLine( "\tmySect1: {0}", myBV[mySect1] );
      Console.WriteLine( "\tmySect2: {0}", myBV[mySect2] );
      Console.WriteLine( "\tmySect3: {0}", myBV[mySect3] );
      Console.WriteLine( "\tmySect4: {0}", myBV[mySect4] );

      // Sets each section to a new value and displays the value of the BitVector32 at each step.
      Console.WriteLine( "Changing the values of each section:" );
      Console.WriteLine( "\tInitial:    \t{0}", myBV.ToString() );
      myBV[mySect1] = 5;
      Console.WriteLine( "\tmySect1 = 5:\t{0}", myBV.ToString() );
      myBV[mySect2] = 3;
      Console.WriteLine( "\tmySect2 = 3:\t{0}", myBV.ToString() );
      myBV[mySect3] = 1;
      Console.WriteLine( "\tmySect3 = 1:\t{0}", myBV.ToString() );
      myBV[mySect4] = 9;
      Console.WriteLine( "\tmySect4 = 9:\t{0}", myBV.ToString() );

      // Displays the values of the sections.
      Console.WriteLine( "New values:" );
      Console.WriteLine( "\tmySect1: {0}", myBV[mySect1] );
      Console.WriteLine( "\tmySect2: {0}", myBV[mySect2] );
      Console.WriteLine( "\tmySect3: {0}", myBV[mySect3] );
      Console.WriteLine( "\tmySect4: {0}", myBV[mySect4] );

   }

}

/*
This code produces the following output.

Initial values:
        mySect1: 0
        mySect2: 0
        mySect3: 0
        mySect4: 0
Changing the values of each section:
        Initial:        BitVector32{00000000000000000000000000000000}
        mySect1 = 5:    BitVector32{00000000000000000000000000000101}
        mySect2 = 3:    BitVector32{00000000000000000000000000011101}
        mySect3 = 1:    BitVector32{00000000000000000000000000111101}
        mySect4 = 9:    BitVector32{00000000000000000000001001111101}
New values:
        mySect1: 5
        mySect2: 3
        mySect3: 1
        mySect4: 9

*/
Imports System.Collections.Specialized

Public Class SamplesBitVector32
   
   Public Shared Sub Main()
      
      ' Creates and initializes a BitVector32.
      Dim myBV As New BitVector32(0)
      
      ' Creates four sections in the BitVector32 with maximum values 6, 3, 1, and 15.
      ' mySect3, which uses exactly one bit, can also be used as a bit flag.
      Dim mySect1 As BitVector32.Section = BitVector32.CreateSection(6)
      Dim mySect2 As BitVector32.Section = BitVector32.CreateSection(3, mySect1)
      Dim mySect3 As BitVector32.Section = BitVector32.CreateSection(1, mySect2)
      Dim mySect4 As BitVector32.Section = BitVector32.CreateSection(15, mySect3)
      
      ' Displays the values of the sections.
      Console.WriteLine("Initial values:")
      Console.WriteLine(ControlChars.Tab + "mySect1: {0}", myBV(mySect1))
      Console.WriteLine(ControlChars.Tab + "mySect2: {0}", myBV(mySect2))
      Console.WriteLine(ControlChars.Tab + "mySect3: {0}", myBV(mySect3))
      Console.WriteLine(ControlChars.Tab + "mySect4: {0}", myBV(mySect4))
      
      ' Sets each section to a new value and displays the value of the BitVector32 at each step.
      Console.WriteLine("Changing the values of each section:")
      Console.WriteLine(ControlChars.Tab + "Initial:    " + ControlChars.Tab + "{0}", myBV.ToString())
      myBV(mySect1) = 5
      Console.WriteLine(ControlChars.Tab + "mySect1 = 5:" + ControlChars.Tab + "{0}", myBV.ToString())
      myBV(mySect2) = 3
      Console.WriteLine(ControlChars.Tab + "mySect2 = 3:" + ControlChars.Tab + "{0}", myBV.ToString())
      myBV(mySect3) = 1
      Console.WriteLine(ControlChars.Tab + "mySect3 = 1:" + ControlChars.Tab + "{0}", myBV.ToString())
      myBV(mySect4) = 9
      Console.WriteLine(ControlChars.Tab + "mySect4 = 9:" + ControlChars.Tab + "{0}", myBV.ToString())
      
      ' Displays the values of the sections.
      Console.WriteLine("New values:")
      Console.WriteLine(ControlChars.Tab + "mySect1: {0}", myBV(mySect1))
      Console.WriteLine(ControlChars.Tab + "mySect2: {0}", myBV(mySect2))
      Console.WriteLine(ControlChars.Tab + "mySect3: {0}", myBV(mySect3))
      Console.WriteLine(ControlChars.Tab + "mySect4: {0}", myBV(mySect4))

   End Sub

End Class


' This code produces the following output.
'
' Initial values:
'        mySect1: 0
'        mySect2: 0
'        mySect3: 0
'        mySect4: 0
' Changing the values of each section:
'        Initial:        BitVector32{00000000000000000000000000000000}
'        mySect1 = 5:    BitVector32{00000000000000000000000000000101}
'        mySect2 = 3:    BitVector32{00000000000000000000000000011101}
'        mySect3 = 1:    BitVector32{00000000000000000000000000111101}
'        mySect4 = 9:    BitVector32{00000000000000000000001001111101}
' New values:
'        mySect1: 5
'        mySect2: 3
'        mySect3: 1
'        mySect4: 9

설명

BitVector32.SectionBitVector32 창으로, CreateSection에 지정 된 최대값을 포함할 수 있는 가장 작은 연속 비트 수로 구성 됩니다.A BitVector32.Section is a window into the BitVector32 and is composed of the smallest number of consecutive bits that can contain the maximum value specified in CreateSection. 예를 들어, 1의 최대값을 사용 하 여 섹션 5의 최대값을 사용 하 여 섹션 3 비트 이루어집니다 반면 1 비트만 구성 됩니다.For example, a section with a maximum value of 1 is composed of only one bit, whereas a section with a maximum value of 5 is composed of three bits. 최대 값이 1 인 BitVector32.Section를 만들어 부울로 사용 하 여 동일한 BitVector32에 정수와 부울을 저장할 수 있습니다.You can create a BitVector32.Section with a maximum value of 1 to serve as a Boolean, thereby allowing you to store integers and Booleans in the same BitVector32.

BitVector32previous 후에 섹션이 이미 있는 경우 해당 섹션은 계속 액세스할 수 있습니다. 그러나 중복 되는 섹션으로 인해 예기치 않은 결과가 발생할 수 있습니다.If sections already exist after previous in the BitVector32, those sections are still accessible; however, overlapping sections might cause unexpected results.

이 방법은 O(1) 작업에 설명 합니다.This method is an O(1) operation.

적용 대상