Console.WindowTop Console.WindowTop Console.WindowTop Console.WindowTop Property

정의

화면 버퍼에 상대적인 콘솔 창 영역의 위쪽 위치를 가져오거나 설정합니다.Gets or sets the top position of the console window area relative to the screen buffer.

public:
 static property int WindowTop { int get(); void set(int value); };
public static int WindowTop { get; set; }
member this.WindowTop : int with get, set
Public Shared Property WindowTop As Integer

속성 값

맨 위 콘솔 창 위치(행)입니다.The uppermost console window position measured in rows.

예외

집합 작업에서 할당할 값이 0보다 작습니다.In a set operation, the value to be assigned is less than zero.

또는-or- 할당 결과, WindowTopWindowHeight의 합이 BufferHeight를 초과합니다.As a result of the assignment, WindowTop plus WindowHeight would exceed BufferHeight.

정보를 읽거나 쓰는 동안 오류가 발생했습니다.Error reading or writing information.

설정 작업은 Windows 이외의 운영 체제에서 호출됩니다.The set operation is invoked on an operating system other than Windows.

예제

다음 예제는 WindowLeft, WindowTop, WindowWidth, WindowHeight, BufferWidth, BufferHeight, 및 CursorVisible 속성 및 SetWindowPosition, SetBufferSize, 및 ReadKey 메서드입니다.The following example demonstrates the WindowLeft, WindowTop, WindowWidth, WindowHeight, BufferWidth, BufferHeight, and CursorVisible properties; and the SetWindowPosition, SetBufferSize, and ReadKey methods. 이 예제에서는 화면 버퍼 너비를 기준으로 화면 버퍼에서을 표 패턴을 그립니다.The example draws a grid pattern in the screen buffer based on the screen buffer width. 다음 예제에서는 콘솔 창에서 아래쪽 화살표, 왼쪽 화살표 또는 오른쪽 화살표 콘솔 키를 누르면 위쪽 화살표는 응답을 이동 합니다.Then the example moves the console window in response to which of the UP ARROW, DOWN ARROW, LEFT ARROW, or RIGHT ARROW console keys is pressed. Grid 패턴을 사용 하면 화면 버퍼에 상대적인 콘솔 창의 이동 상태를 확인할 수 있습니다.The grid pattern helps you see the movement of the console window relative to the screen buffer.

// This example demonstrates the Console.WindowLeft and
//                               Console.WindowTop properties.
using namespace System;
using namespace System::Text;
using namespace System::IO;

//
int saveBufferWidth;
int saveBufferHeight;
int saveWindowHeight;
int saveWindowWidth;
bool saveCursorVisible;

//
int main()
{
   String^ m1 = "1) Press the cursor keys to move the console window.\n"
   "2) Press any key to begin. When you're finished...\n"
   "3) Press the Escape key to quit.";
   String^ g1 = "+----";
   String^ g2 = "|    ";
   String^ grid1;
   String^ grid2;
   StringBuilder^ sbG1 = gcnew StringBuilder;
   StringBuilder^ sbG2 = gcnew StringBuilder;
   ConsoleKeyInfo cki;
   int y;
   
   //
   try
   {
      saveBufferWidth = Console::BufferWidth;
      saveBufferHeight = Console::BufferHeight;
      saveWindowHeight = Console::WindowHeight;
      saveWindowWidth = Console::WindowWidth;
      saveCursorVisible = Console::CursorVisible;
      
      //
      Console::Clear();
      Console::WriteLine( m1 );
      Console::ReadKey( true );
      
      // Set the smallest possible window size before setting the buffer size.
      Console::SetWindowSize( 1, 1 );
      Console::SetBufferSize( 80, 80 );
      Console::SetWindowSize( 40, 20 );
      
      // Create grid lines to fit the buffer. (The buffer width is 80, but
      // this same technique could be used with an arbitrary buffer width.)
      for ( y = 0; y < Console::BufferWidth / g1->Length; y++ )
      {
         sbG1->Append( g1 );
         sbG2->Append( g2 );

      }
      sbG1->Append( g1, 0, Console::BufferWidth % g1->Length );
      sbG2->Append( g2, 0, Console::BufferWidth % g2->Length );
      grid1 = sbG1->ToString();
      grid2 = sbG2->ToString();
      Console::CursorVisible = false;
      Console::Clear();
      for ( y = 0; y < Console::BufferHeight - 1; y++ )
      {
         if ( y % 3 == 0 )
                  Console::Write( grid1 );
         else
                  Console::Write( grid2 );

      }
      Console::SetWindowPosition( 0, 0 );
      do
      {
         cki = Console::ReadKey( true );
         switch ( cki.Key )
         {
            case ConsoleKey::LeftArrow:
               if ( Console::WindowLeft > 0 )
                              Console::SetWindowPosition( Console::WindowLeft - 1, Console::WindowTop );
               break;

            case ConsoleKey::UpArrow:
               if ( Console::WindowTop > 0 )
                              Console::SetWindowPosition( Console::WindowLeft, Console::WindowTop - 1 );
               break;

            case ConsoleKey::RightArrow:
               if ( Console::WindowLeft < (Console::BufferWidth - Console::WindowWidth) )
                              Console::SetWindowPosition( Console::WindowLeft + 1, Console::WindowTop );
               break;

            case ConsoleKey::DownArrow:
               if ( Console::WindowTop < (Console::BufferHeight - Console::WindowHeight) )
                              Console::SetWindowPosition( Console::WindowLeft, Console::WindowTop + 1 );
               break;
         }
      }
      while ( cki.Key != ConsoleKey::Escape );
   }
   catch ( IOException^ e ) 
   {
      Console::WriteLine( e->Message );
   }
   finally
   {
      Console::Clear();
      Console::SetWindowSize( 1, 1 );
      Console::SetBufferSize( saveBufferWidth, saveBufferHeight );
      Console::SetWindowSize( saveWindowWidth, saveWindowHeight );
      Console::CursorVisible = saveCursorVisible;
   }

} // end Main


/*
This example produces results similar to the following:

1) Press the cursor keys to move the console window.
2) Press any key to begin. When you're finished...
3) Press the Escape key to quit.

...

+----+----+----+-
|    |    |    |
|    |    |    |
+----+----+----+-
|    |    |    |
|    |    |    |
+----+----+----+-

*/
// This example demonstrates the Console.WindowLeft and
//                               Console.WindowTop properties.
using System;
using System.Text;
using System.IO;
//
class Sample 
{
    public static int saveBufferWidth;
    public static int saveBufferHeight;
    public static int saveWindowHeight;
    public static int saveWindowWidth;
    public static bool saveCursorVisible;
//
    public static void Main() 
    {
    string m1 = "1) Press the cursor keys to move the console window.\n" +
                "2) Press any key to begin. When you're finished...\n" +
                "3) Press the Escape key to quit.";
    string g1 = "+----";
    string g2 = "|    ";
    string grid1;
    string grid2;
    StringBuilder sbG1 = new StringBuilder();
    StringBuilder sbG2 = new StringBuilder();
    ConsoleKeyInfo cki;
    int y;
//
    try 
    {
    saveBufferWidth  = Console.BufferWidth;
    saveBufferHeight = Console.BufferHeight;
    saveWindowHeight = Console.WindowHeight;
    saveWindowWidth  = Console.WindowWidth;
    saveCursorVisible = Console.CursorVisible;
//
    Console.Clear();
    Console.WriteLine(m1);
    Console.ReadKey(true);

// Set the smallest possible window size before setting the buffer size.
    Console.SetWindowSize(1, 1);
    Console.SetBufferSize(80, 80);
    Console.SetWindowSize(40, 20);

// Create grid lines to fit the buffer. (The buffer width is 80, but
// this same technique could be used with an arbitrary buffer width.)
    for (y = 0; y < Console.BufferWidth/g1.Length; y++)
        {
        sbG1.Append(g1);
        sbG2.Append(g2);
        }
    sbG1.Append(g1, 0, Console.BufferWidth%g1.Length);
    sbG2.Append(g2, 0, Console.BufferWidth%g2.Length);
    grid1 = sbG1.ToString();
    grid2 = sbG2.ToString();

    Console.CursorVisible = false;
    Console.Clear();
    for (y = 0; y < Console.BufferHeight-1; y++)
        {
        if (y%3 == 0)
            Console.Write(grid1);
        else
            Console.Write(grid2);
        }

    Console.SetWindowPosition(0, 0);
    do
        {
        cki = Console.ReadKey(true);
        switch (cki.Key) 
            {
            case ConsoleKey.LeftArrow:
                if (Console.WindowLeft > 0) 
                    Console.SetWindowPosition(
                            Console.WindowLeft-1, Console.WindowTop);
                break;
            case ConsoleKey.UpArrow:
                if (Console.WindowTop > 0) 
                    Console.SetWindowPosition(
                            Console.WindowLeft, Console.WindowTop-1);
                break;
            case ConsoleKey.RightArrow:
                if (Console.WindowLeft < (Console.BufferWidth-Console.WindowWidth)) 
                    Console.SetWindowPosition(
                            Console.WindowLeft+1, Console.WindowTop);
                break;
            case ConsoleKey.DownArrow:
                if (Console.WindowTop < (Console.BufferHeight-Console.WindowHeight)) 
                    Console.SetWindowPosition(
                            Console.WindowLeft, Console.WindowTop+1);
                break;
            }
        } 
    while (cki.Key != ConsoleKey.Escape);  // end do-while
    } // end try
    catch (IOException e) 
        {
        Console.WriteLine(e.Message);
        }
    finally 
        {
        Console.Clear();
        Console.SetWindowSize(1, 1);
        Console.SetBufferSize(saveBufferWidth, saveBufferHeight);
        Console.SetWindowSize(saveWindowWidth, saveWindowHeight);
        Console.CursorVisible = saveCursorVisible;
        }
    } // end Main
} // end Sample
/*
This example produces results similar to the following:

1) Press the cursor keys to move the console window.
2) Press any key to begin. When you're finished...
3) Press the Escape key to quit.

...

+----+----+----+-
|    |    |    |
|    |    |    |
+----+----+----+-
|    |    |    |
|    |    |    |
+----+----+----+-

*/
' This example demonstrates the Console.WindowLeft and
'                               Console.WindowTop properties.
Imports System.IO
Imports System.Text

Class Sample
   Public Shared saveBufferWidth As Integer
   Public Shared saveBufferHeight As Integer
   Public Shared saveWindowHeight As Integer
   Public Shared saveWindowWidth As Integer
   Public Shared saveCursorVisible As Boolean
   
   Public Shared Sub Main()
      Dim m1 As String = _
          "1) Press the cursor keys to move the console window." & vbCrlf & _
          "2) Press any key to begin. When you're finished..."   & vbCrlf & _
          "3) Press the Escape key to quit."
      Dim g1 As String = "+----"
      Dim g2 As String = "|    "
      Dim grid1 As String
      Dim grid2 As String
      Dim sbG1 As New StringBuilder()
      Dim sbG2 As New StringBuilder()
      Dim cki As ConsoleKeyInfo
      Dim y As Integer
      '
      Try
         saveBufferWidth = Console.BufferWidth
         saveBufferHeight = Console.BufferHeight
         saveWindowHeight = Console.WindowHeight
         saveWindowWidth = Console.WindowWidth
         saveCursorVisible = Console.CursorVisible
         '
         Console.Clear()
         Console.WriteLine(m1)
         Console.ReadKey(True)
         
         ' Set the smallest possible window size before setting the buffer size.
         Console.SetWindowSize(1, 1)
         Console.SetBufferSize(80, 80)
         Console.SetWindowSize(40, 20)
         
         ' Create grid lines to fit the buffer. (The buffer width is 80, but
         ' this same technique could be used with an arbitrary buffer width.)
         For y = 0 To (Console.BufferWidth / g1.Length) - 1
            sbG1.Append(g1)
            sbG2.Append(g2)
         Next y
         sbG1.Append(g1, 0, Console.BufferWidth Mod g1.Length)
         sbG2.Append(g2, 0, Console.BufferWidth Mod g2.Length)
         grid1 = sbG1.ToString()
         grid2 = sbG2.ToString()
         
         Console.CursorVisible = False
         Console.Clear()
         For y = 0 To (Console.BufferHeight - 2)
            If y Mod 3 = 0 Then
               Console.Write(grid1)
            Else
               Console.Write(grid2)
            End If
         Next y 
         '
         Console.SetWindowPosition(0, 0)
         Do
            cki = Console.ReadKey(True)
            Select Case cki.Key
               Case ConsoleKey.LeftArrow
                  If Console.WindowLeft > 0 Then
                     Console.SetWindowPosition(Console.WindowLeft - 1, Console.WindowTop)
                  End If
               Case ConsoleKey.UpArrow
                  If Console.WindowTop > 0 Then
                     Console.SetWindowPosition(Console.WindowLeft, Console.WindowTop - 1)
                  End If
               Case ConsoleKey.RightArrow
                  If Console.WindowLeft < Console.BufferWidth - Console.WindowWidth Then
                     Console.SetWindowPosition(Console.WindowLeft + 1, Console.WindowTop)
                  End If
               Case ConsoleKey.DownArrow
                  If Console.WindowTop < Console.BufferHeight - Console.WindowHeight Then
                     Console.SetWindowPosition(Console.WindowLeft, Console.WindowTop + 1)
                  End If
            End Select
         Loop While cki.Key <> ConsoleKey.Escape
      ' end do-while
      ' end try
      Catch e As IOException
         Console.WriteLine(e.Message)
      Finally
         Console.Clear()
         Console.SetWindowSize(1, 1)
         Console.SetBufferSize(saveBufferWidth, saveBufferHeight)
         Console.SetWindowSize(saveWindowWidth, saveWindowHeight)
         Console.CursorVisible = saveCursorVisible
      End Try
   End Sub
End Class
'
'This example produces results similar to the following:
'
'1) Press the cursor keys to move the console window.
'2) Press any key to begin. When you're finished...
'3) Press the Escape key to quit.
'
'...
'
'+----+----+----+-
'|    |    |    |
'|    |    |    |
'+----+----+----+-
'|    |    |    |
'|    |    |    |
'+----+----+----+-
'

설명

콘솔에 더 큰 버퍼 사각형 영역을 사각형 창을 나타냅니다.The console represents a rectangular window into a larger rectangular buffer area. 행의 수 및 열 번호로 가로로 창 및 버퍼를 모두 세로 방향으로 측정 됩니다.Both the window and the buffer are measured vertically by their number of rows and horizontally by their number of columns. 버퍼 영역의 크기에 의해 정의 됩니다 합니다 BufferHeightBufferWidth 속성입니다.The dimensions of the buffer area are defined by the BufferHeight and BufferWidth properties. 콘솔 영역의 크기에 의해 정의 됩니다 합니다 WindowHeightWindowWidth 속성입니다.The dimensions of the console area are defined by the WindowHeight and WindowWidth properties. WindowTop 속성 결정 버퍼 영역의 행에서 첫 번째 열의 콘솔 창에 표시 됩니다.The WindowTop property determines which row of the buffer area is displayed in the first column of the console window. 값을 WindowTop 속성의 범위는 0 ~ BufferHeight - WindowHeight합니다.The value of the WindowTop property can range from 0 to BufferHeight - WindowHeight. Throw 범위를 벗어나는 값으로 설정 하려고 한 ArgumentOutOfRangeException합니다.Attempting to set it to a value outside that range throws an ArgumentOutOfRangeException.

값을 설정 하려고 합니다 WindowTop 출력 되 면 속성 리디렉션 throw는 IOException 예외.Attempting to set the value of the WindowTop property when output is redirected throws an IOException exception. 예외를 방지 하려면 경우에만이 속성의 값을 설정할 수 있습니다 합니다 IsOutputRedirected 속성이 반환 false합니다.To prevent the exception, you can set the value of this property only if the IsOutputRedirected property returns false.

적용 대상