GraphicsPathIterator.CopyData(PointF[], Byte[], Int32, Int32) 메서드

정의

연결된 PathPointsPathTypes 속성 및 GraphicsPath 속성 배열을 지정된 두 배열에 복사합니다.Copies the PathPoints property and PathTypes property arrays of the associated GraphicsPath into the two specified arrays.

public:
 int CopyData(cli::array <System::Drawing::PointF> ^ % points, cli::array <System::Byte> ^ % types, int startIndex, int endIndex);
public int CopyData (ref System.Drawing.PointF[] points, ref byte[] types, int startIndex, int endIndex);
member this.CopyData : PointF[] * Byte[] * int * int -> int
Public Function CopyData (ByRef points As PointF(), ByRef types As Byte(), startIndex As Integer, endIndex As Integer) As Integer

매개 변수

points
PointF[]

반환될 때 해당 경로에 있는 지점을 나타내는 PointF 구조체의 배열을 포함합니다.Upon return, contains an array of PointF structures that represents the points in the path.

types
Byte[]

반환될 때 해당 경로에 있는 지점의 종류를 나타내는 바이트의 배열을 포함합니다.Upon return, contains an array of bytes that represents the types of points in the path.

startIndex
Int32

배열의 시작 인덱스를 지정합니다.Specifies the starting index of the arrays.

endIndex
Int32

배열의 끝 인덱스를 지정합니다.Specifies the ending index of the arrays.

반환

복사된 지점 수입니다.The number of points copied.

예제

다음 예제는 Windows Forms에서 사용 하도록 설계 되었으며 필요 PaintEventArgs e, OnPaint 이벤트 개체입니다.The following example is designed for use with Windows Forms, and it requires PaintEventArgse, an OnPaint event object. 이 코드에서는 다음 작업을 수행합니다.The code performs the following actions:

  • 그래픽 경로를 만듭니다.Creates a graphics path.

  • 여러 기본 형식 및 몇 가지 표식으로 채웁니다.Populates it with several primitives and some markers.

  • 화면 왼쪽에서 경로 데이터를 나열합니다.Lists the path data on the left side of the screen.

  • 만듭니다는 GraphicsPathIterator 다시 수행 하 고 있습니다.Creates a GraphicsPathIterator and rewinds it.

  • 두 번째 표식 경로 데이터 인덱스를 증가 시킵니다.Increments the path data index to the second marker.

  • 호출 된 CopyData 시작과 끝 사이는 경로 데이터를 복사 하는 메서드 지점에 인덱스 및 형식 배열입니다.Calls the CopyData method to copy the path data contained between the start and end indexes to the points and types arrays.

  • 화면의 오른쪽에서 복사 된 데이터를 나열합니다.Lists this copied data on the right side of the screen.

public:
   void CopyDataExample( PaintEventArgs^ e )
   {
      // Create a graphics path.
      GraphicsPath^ myPath = gcnew GraphicsPath;

      // Set up a points array.
      array<Point>^ myPoints = {Point(20,20),Point(120,120),Point(20,120),Point(20,20)};

      // Create a rectangle.
      Rectangle myRect = Rectangle(120,120,100,100);

      // Add the points, rectangle, and an ellipse to the path.
      myPath->AddLines( myPoints );
      myPath->SetMarkers();
      myPath->AddRectangle( myRect );
      myPath->SetMarkers();
      myPath->AddEllipse( 220, 220, 100, 100 );

      // Get the total number of points for the path, and arrays of
      // the  points and types.
      int myPathPointCount = myPath->PointCount;
      array<PointF>^myPathPoints = myPath->PathPoints;
      array<Byte>^myPathTypes = myPath->PathTypes;

      // Set up variables for listing the array of points on the left
      // side of the screen.
      int i;
      float j = 20;
      System::Drawing::Font^ myFont = gcnew System::Drawing::Font( "Arial",8 );
      SolidBrush^ myBrush = gcnew SolidBrush( Color::Black );

      // List the set of points and types and types to the left side
      // of the screen.
      for ( i = 0; i < myPathPointCount; i++ )
      {
         e->Graphics->DrawString( myPathPoints[ i ].X + ", " + myPathPoints[ i ].Y + ", " + myPathTypes[ i ], myFont, myBrush, 20, j );
         j += 20;
      }

      // Create a GraphicsPathIterator for myPath and rewind it.
      GraphicsPathIterator^ myPathIterator = gcnew GraphicsPathIterator( myPath );
      myPathIterator->Rewind();

      // Set up the arrays to receive the copied data.
      array<PointF>^points = gcnew array<PointF>(myPathIterator->Count);
      array<Byte>^types = gcnew array<Byte>(myPathIterator->Count);
      int myStartIndex;
      int myEndIndex;
      
      // Increment the starting index to the second marker in the
      // path.
      myPathIterator->NextMarker( myStartIndex, myEndIndex );
      myPathIterator->NextMarker( myStartIndex, myEndIndex );
      
      // Copy all the points and types from the starting index to the
      // ending index to the points array and the types array
      // respectively.
      int numPointsCopied = myPathIterator->CopyData( points, types, myStartIndex, myEndIndex );
      
      // List the copied points to the right side of the screen.
      j = 20;
      int copiedStartIndex = 0;
      for ( i = 0; i < numPointsCopied; i++ )
      {
         copiedStartIndex = myStartIndex + i;
         e->Graphics->DrawString( String::Format( "Point: {0}, Value: {1}, Type: {2}", copiedStartIndex, points[ i ], types[ i ] ), myFont, myBrush, 200, j );
         j += 20;

      }
   }
public void CopyDataExample(PaintEventArgs e)
{
             
    // Create a graphics path.
    GraphicsPath myPath = new GraphicsPath();
             
    // Set up a points array.
    Point[] myPoints =
             {
                 new Point(20, 20),
                 new Point(120, 120),
                 new Point(20, 120),
                 new Point(20, 20)
             };
             
    // Create a rectangle.
    Rectangle myRect = new Rectangle(120, 120, 100, 100);
             
    // Add the points, rectangle, and an ellipse to the path.
    myPath.AddLines(myPoints);
    myPath.SetMarkers();
    myPath.AddRectangle(myRect);
    myPath.SetMarkers();
    myPath.AddEllipse(220, 220, 100, 100);
             
    // Get the total number of points for the path, and arrays of
    // the  points and types.
    int myPathPointCount = myPath.PointCount;
    PointF[] myPathPoints = myPath.PathPoints;
    byte[] myPathTypes = myPath.PathTypes;
             
    // Set up variables for listing the array of points on the left
    // side of the screen.
    int i;
    float j = 20;
    Font myFont = new Font("Arial", 8);
    SolidBrush myBrush = new SolidBrush(Color.Black);
             
    // List the set of points and types and types to the left side
    // of the screen.
    for(i=0; i<myPathPointCount; i++)
    {
        e.Graphics.DrawString(myPathPoints[i].X.ToString()+
            ", " + myPathPoints[i].Y.ToString() + ", " +
            myPathTypes[i].ToString(),
            myFont,
            myBrush,
            20,
            j);
        j+=20;
    }
             
    // Create a GraphicsPathIterator for myPath and rewind it.
    GraphicsPathIterator myPathIterator =
        new GraphicsPathIterator(myPath);
    myPathIterator.Rewind();
             
    // Set up the arrays to receive the copied data.
    PointF[] points = new PointF[myPathIterator.Count];
    byte[] types = new byte[myPathIterator.Count];
    int myStartIndex;
    int myEndIndex;
             
    // Increment the starting index to the second marker in the
    // path.
    myPathIterator.NextMarker(out myStartIndex, out myEndIndex);
    myPathIterator.NextMarker(out myStartIndex, out myEndIndex);
             
    // Copy all the points and types from the starting index to the
    // ending index to the points array and the types array
    // respectively.
    int numPointsCopied = myPathIterator.CopyData(
        ref points,
        ref types,
        myStartIndex,
        myEndIndex);
             
    // List the copied points to the right side of the screen.
    j = 20;
    int copiedStartIndex = 0;
    for(i=0; i<numPointsCopied; i++)
    {
        copiedStartIndex = myStartIndex + i;
        e.Graphics.DrawString(
            "Point: " + copiedStartIndex.ToString() +
            ", Value: " + points[i].ToString() +
            ", Type: " + types[i].ToString(),
            myFont,
            myBrush,
            200,
            j);
        j+=20;
    }
}
Public Sub CopyDataExample(ByVal e As PaintEventArgs)

    ' Create a graphics path.
    Dim myPath As New GraphicsPath

    ' Set up a points array.
    Dim myPoints As Point() = {New Point(20, 20), _
    New Point(120, 120), New Point(20, 120), New Point(20, 20)}

    ' Create a rectangle.
    Dim myRect As New Rectangle(120, 120, 100, 100)

    ' Add the points, rectangle, and an ellipse to the path.
    myPath.AddLines(myPoints)
    myPath.SetMarkers()
    myPath.AddRectangle(myRect)
    myPath.SetMarkers()
    myPath.AddEllipse(220, 220, 100, 100)

    ' Get the total number of points for the path, and arrays of the
    ' points and types.
    Dim myPathPointCount As Integer = myPath.PointCount
    Dim myPathPoints As PointF() = myPath.PathPoints
    Dim myPathTypes As Byte() = myPath.PathTypes

    ' Set up variables for listing the array of points on the left side
    ' of the screen.
    Dim i As Integer
    Dim j As Single = 20
    Dim myFont As New Font("Arial", 8)
    Dim myBrush As New SolidBrush(Color.Black)

    ' List the set of points and types and types to the left side of
    ' the screen.
    For i = 0 To myPathPointCount - 1
        e.Graphics.DrawString(myPathPoints(i).X.ToString() + ", " + _
        myPathPoints(i).Y.ToString() + ", " + _
        myPathTypes(i).ToString(), myFont, myBrush, 20, j)
        j += 20
    Next i

    ' Create a GraphicsPathIterator for myPath and rewind it.
    Dim myPathIterator As New GraphicsPathIterator(myPath)
    myPathIterator.Rewind()

    ' Set up the arrays to receive the copied data.
    Dim points(myPathIterator.Count) As PointF
    Dim types(myPathIterator.Count) As Byte
    Dim myStartIndex As Integer
    Dim myEndIndex As Integer

    ' Increment the starting index to the second marker in the path.
    myPathIterator.NextMarker(myStartIndex, myEndIndex)
    myPathIterator.NextMarker(myStartIndex, myEndIndex)

    ' Copy all the points and types from the starting index to the
    ' ending index to the  points array and the types array
    ' respectively.
    Dim numPointsCopied As Integer = myPathIterator.CopyData(points, _
    types, myStartIndex, myEndIndex)

    ' List the copied points to the right side of the screen.
    j = 20
    Dim copiedStartIndex As Integer = 0
    For i = 0 To numPointsCopied - 1
        copiedStartIndex = myStartIndex + i
        e.Graphics.DrawString("Point: " + _
        copiedStartIndex.ToString() + ", Value: " + _
        points(i).ToString() + ", Type: " + types(i).ToString(), _
        myFont, myBrush, 200, j)
        j += 20
    Next i
End Sub

설명

사용 된 startIndexendIndex 경로 데이터의 지정된 된 범위를 복사 하는 매개 변수입니다.Use the startIndex and endIndex parameters to copy a specified range of the path data.

적용 대상